Removal of T.Code from role

Hi all,
i have to remove a t.code FBRA from all the plants users, there are 40 single roles, with T.Code FBRA, how can i remove it at a time, without deleting individually in each roles. Is there any method , plz let me know.
Thanks & Regards
Syed..

Hi Syed,
             Are you using a role which is created by using the standard role.
             Copy the role to a new role then delete the transaction from the role
             and assign the user with the newly created role. I think this would be one of the possible way. After that remove the users from the previous role.
Please reward points if helpfull.
Regards,
Vamshi

Similar Messages

How do i remove the restriction code from my iphone 4s? i forgot it

How do i remove the restriction code from my IPHONE 4S? I have forgotten what it is. PLEASE HELP!!!

If you lose or forget a restriction passcode, you will need to perform a factory restore to remove it.
That is what it says here http://support.apple.com/kb/ht4213
Message was edited by: Ocean20

I would like to remove the pass code from my iphone icloud account. I hate having to log in every time ti goes to sleep.

How do I remove the pass code from my iphone icloud account? I hate having to log in every time my phone goes to sleep.

Welcome to the Apple community.
settings > general > passcode lock > off.

How would I go about removing the required code from a form field?

I have this contact form that I downloaded and its fine. I just need to know how to remove the required field code from the contact no field.
Thanks in advance
Here is a link to the form and all of its assets
http://www.formget.com/jquery-contact-form/#comment-93253

HTML code, change this:
<label>Contact No: <span>*</span></label>
To this:
<label>Contact No:</label>
jQuery code, change this:
if (name == '' || email == '' || contact == '') {
alert("Please Fill Required Fields");
} else {
to this:
if (name == '' || email == '') {
alert("Please Fill Required Fields");
} else {
Nancy O.

Not able to remove the ABAP code from Transformation

Hello Experts,
We have transformation for DSO in that for one infoobject, field routine is written, Break Point is hard coded there and it's move to production. Now we are trying to remove that break point from development and then move it production.
we are doing following activity to remove the break point.
1. Open the transformation.
2. Open the field routine.
3. Going to ABAP code in field routine.
4. Remove the hard coded Break Point from ABAP code.
5. Saving the code.
6. It's taking to again filed routine window.
7. We close the window and activate the transformation.
8. When again check the ABAP code in field routine then it shows hard coded Break Point again.
9. Not able to remove the hard coded break point.
Can anyone know how to do this.
Help will be appreciated.
Thanks

Hi,
As pointed above, after point 6 don't simply close the window but click on Transfer Value and then activate your transformation. Refresh the system and check again.
Regards,
Arminder

Removing TCP hex codes from ascii string

I have a TCP connection to my VI and I'm using PuTTY to communicate with it. It is a basic terminal with a few commands. On boot my first command is always unrecognized because a few TCP protocol's are sent immediately beforehand:
FF FB 1F “window size”
FF FB 20 “terminal speed”
FF FB 18 “terminal type”
FF FB 27 “Telnet Environment Option”
FF FD 01 “echo”
FF FB 03 “suppress go ahead”
FF FD 03 “suppress go ahead”
Each command is always proceeded by a command character "FF". I can remove the entire offending sting without any problem, however what I've been trying to do is remove any hex code following the command character. I have tried a few things with regular expressions without much luck. Any insight on how to solve this challenge would be appreciated!
Thanks,
Devin

I'm not a regular expression power user, but I'd try something like the code below (right-click on "Search and Replace String" to set the "Regular Expression" option). This code looks for \FF followed by either \F0 through FA, or \FB through \FE followed by any other character, which I think matches the rules in the Telnet protocol as listed here: http://tools.ietf.org/html/rfc854 It replaces any match found with an empty string.

Removal of Inactive Objects from Roles

Dear All,
Please let me know, how to remove the inactive objects in roles.
Thanks in Advance,
Thiyagu

Hi Thiyagu.
In addition to Bernhard & Arpan's inputs,Since the number of Manually maintained objects (Inactive Status) is very less in a role, the majority of them are left behind for manual clean up. As a best practice , Inactive objects are retained in roles to have some history in case of any audits and also to maintain the object dependency to see why the object got into the role ... It helps any new security admin's to steer through audits when old timers move out ...
Hope it helps.
Rgds,
Sri

Re: How do I remove Information ETI codes from my monitor screen?

Model Number is SDM-HS73

I think you would have to go to the folder where they are and delete from there. Then they shouldn't show up anymore as choices.

Remove transaction codes from multiple roles at a time

Hello,
how to remove transaction codes from multiple roles at at time?
Thank you in Advance.

Hi Vanita,
Why do you want to remove a t-code from all the roles. Are you no longer going to use the t-code. If this is the case then you can lock the transaction code in T-code SM01 so that no one can use it. But this would effect other users as well, it should only be locked if no one should use the particular T-code.
Another alternative is to write a program to remove the particular T-Code from the table AGR_TCODES where the relation ship between the role and t-code is stored.
Thanks.

Users are not removed from role using UME API

Hello,
I am using this code to remove users from a batch of roles that I have.
Everything is running OK, no exception is thrown and at the System.out I see all the actions that needs to be taken correctly. The problem is that if I'll go later to one of the roles the users are still assigned to it. Any idea what I'm doing wrong here?
try
IRoleFactory roles = UMFactory.getRoleFactory();
IUserFactory users = UMFactory.getUserFactory();
IRoleSearchFilter filter = roles.getRoleSearchFilter();
filter.setUniqueName("<My_filter>", ISearchAttribute.LIKE_OPERATOR, false);
ISearchResult sresult = roles.searchRoles(filter);
if ( sresult.getState() == ISearchResult.SEARCH_RESULT_OK )
     while(sresult.hasNext())
     String id = (String)sresult.next();
     IRole role = UMFactory.getRoleFactory().getMutableRole(id);
     Iterator i = role.getUserMembers(false);
     while (i.hasNext())
                     String uid = (String)i.next();
          IUser user = users.getUser(uid);
          role.removeUserMember(user.getUniqueName());
          System.out.println("Removed user: " + user.getUniqueName() + " from role: " + role.getDisplayName());
     role.save();
     role.commit();
catch (Exception e)
     manager.reportException(new WDNonFatalException(e), false);

Solved it!
It needs the FQDN User ID...

PFCG issue - removing transaction codes from menu and not clearing up the authorization tab

I’m using SAP ERP version ECC6 and EHP5 and also we have updated our system with the PSCD FI module.
I’m having the following issue in PFCG transaction code - I have created a new single role by copied other or from scratch and added few transaction codes into the menu. After that, I went in the authorization tab using the "Change Authorization Data" and I felled all the missing information until the role was green out. I generated the role then I totally went out. I come back to the same role that I created earlier and I did removed all the transaction codes from the menu and I did find the following:
- the Authorization tab light didn't change from green to red
- I went into the Authorization tab by "Change Authorization Data" and a part of the objects were still in.
Normally behave should be:
- when we remove one transaction code from the menu the light from Authorization tab should change from green to red. When you empty the menu then the light color should change also, but the authorization tab should be also empty.
Could please give me some idea how to do it next?

Hi Gabriela,
Most of the times standard roles contains manually added authorization objects. When ever you are creating a new role by copying the existing standard role so by default, these objects will come in to new role.
Now, coming to your role. After removing t code from role if nothing has changed in Authorization tab means.
Here are the possible reasons.
1. The t code which you have removed might not have any checked and maintained authorization objects, that's why your Authorization tab still in unchanged.
2. Rememeber, when ever you are adding or removing t code from menu always use expert mode for profile generation option along with "Read old status and merge with new data" Option.
This will bring the all checked and maintained data for each t code.
3. After removing the t codes from menu and if you generate the Authorization tab by using expert mode option still if you find authorization objects means, those are manually added authorization objects that's why those were not removed.
I hope this will give some clue to your issue.
Thanks,
Siva

Removing the country code prefix from all contacts in the Address Book

upgrading my iphone (to os 3.0) added country codes to all of my contacts,
not noticing this i synced it with my mac, thus adding said preixes to the contacts on my mac as well.
is there a way (only applescript from what i understand) to remove the country code from all my contacts?
thanks!

paste the following into Script Editor
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
tell application "Address Book"
set mlist to selection
repeat with per in mlist
set NP to number of phones of per
repeat with i from 1 to NP
set curphone to value of (phone i of per) as text
if text 1 thru 4 of curphone is "+972" then
set value of phone i of per to "0" & text 5 thru -1 of curphone
end if
end repeat
end repeat
save
end tell</pre>
select all the contacts you want to be affected in Address Book (you can select them all) and press "run" in script editor.

Removal of t-code

Hi All,
We want to remove a t-code from a display role where the
menu is not maintained.
The S_TCODE is given as *. (Full authorization)
how to go about the same. If we remove that from S_TCODE
we need add all other entries which is very difficult.
Please advise.
Thanks,
DVRK

> I think the best option is to create ranges with wildcards excluding the transaction you need to exclude.
Oh dear, I personally think this is about the worst option
Like Julius said, better rebuild the role, after redesigning it of course. And put all required transactions in it via the menu.
One very important thing about SAP security is that it is about allowing stuff, not about denying. So giving a user all rights and taking away a few is not the road to follow. A role with * in S_TCODE should never be called a display role as it is bound to have several security loopholes in it and the same goes for a role with tcode ranges. You'll be amazed how many programs can be started through more than one transaction.
Another example of risks involved: Everytime a new transaction is introduced into your system, either by your own developers or by SAP, it is automatically executable via your display role, whether it is a display transaction or not.....
Better have the users specify what they want to display and which transactions they need to do that and don't take "all" for an answer.
Jurjen
P.s.,
Carlos, asking for rewards is against forum rules.
Edited by: Jurjen Heeck on Oct 23, 2008 8:39 AM

Removal of t-code authorization

Hi,
How to remove authorization for a single t-code from the list of about 500 users.
They have been authorized to this t-code via different roles.
Thanks in advance,
RAMA

Auke Visser wrote:>
> It is simpel but a lot of work remove the t-code from every role!
I assume that "simpel" has a completely different meaning to the generally accepted meaning of the English word "simple"?
I dont think it is possible to answer this question in a usefull manner without knowing the transaction code(s)...
In many cases, removing the transaction code from object S_TCODE (only) is useless (except for stupid end users).
Relying on the fact that all end users are stupid, can quickly become an occupational hazard for many transactions...
Depending on the transaction, my recommentation would be to look whether there is an object check upfront in the transaction's underlying coding or a common denominator object which is checked, regardless of how the user accesses the "transaction"... and then restrict those authorization object(s) or remove them entirely if you are sure that the access is not required for what ever reason.
Some transaction groups have a "base check" function from which you can form an opinion.
Kind regards,
Julius

Authorization removed but T-code still accesible

Hello,
We are on ECC 6.0 / Oracle 10 / Solaris 10...
I am removing a T-code from a Z role in the system , it is still reflecting to the user...
I am removing it from the menu completely , but i can see it in object S_TCODE...
Is this is a bug or i am missing something?
Thanks,
R@HuL...

Hi Rahul,
Please check the status of the object S_TCODE in the role being mentioned by you.If you have the status of the object as STANDARD then the values have been pulled from the entries in the role menu and if the status is MANUALLY then the values have been entered manually and not through the role menu.
After removing the concerned transaction from the role menu and generating the profile,please check where the transaction is appearing in the role authorization,it should not appear in the S_TCODE object if it is in STANDARD status.But if the object S_TCODE is in status MANUALLY the transaction might appear there.
Bidisha

Removal of T.Code from role

Similar Messages

Maybe you are looking for