Remove 'Create Like' from GRID for Jobs

Is there any way to REMOVE the 'Create Like' button from the Jobs tab. I have users that are required to RUN already established jobs, but are not allowed to CREATE or MODIFY jobs. It appears that if you give the jobs_admin right, then the user gets ALL rights. So, I thought that if I could modify the GRID page I could accomplish my goal.
Anyone had to do this?
Thanks,
Brad

I thought that you had to grant SCHEDULER_ADMIN to a user in order to use any of the jobs area of Grid. If you know a way to get more granular and only provide submit and view for jobs, please let me know.

Similar Messages

  • Error in creating IO file handles for job (number 3152513)

    Hi All -
    I am using Tidal 5.3.1.307. And the Windows agent that is running these jobs is at 3.0.2.05.
    Basically the error in the subject was received when starting a particular job once it was cancelled and a couple of other different jobs a few days before. These jobs have run successfully in the past.
    This particular job was running for 500+ minutes when it should run at an estimated 40 minutes. At that time it would not allow for a re-start of the job, it just stayed in a launched status.
    Trying to figure out what causes this error.
    Error in creating IO file handles for job 3152513
    Note - from that being said we were to see 2 instances of this process running at the same time, we noticed some blocking on the DB side of things.
    Trying to figure out if this is a known tidal issue or a coding issue or both.
    Another side note, after cancelling the 2nd rerun attempt the following error was encountered: Error activating job, Duplicate.
    When we did receive the Error creating IO file, the job did actually restart, but Tidal actually lost hooks into it and the query was still running as an orphan on the db server.
    Thanks All!

    The server to reboot is the agent server.  You can try stopping the agent and then manually deleting the file.  That may work.  When the agent is running the agent process may keep the file locked, so rebooting may not be sufficient.
    The numerical folders are found as sub-directories off of the services directory I mentioned.  I think the numbers correspond to the job type, so one number corresponds to standard jobs, another to FTP jobs.  I'd just look in the numbered directories until you find a filename matching the job number.
    The extensions don't really matter since you will want to delete all files that match your job number.  There should only be one or two files that you need to delete and they should all be in the same numbered sub-directory.
    As to the root cause of the problem, I can't really say since it doesn't happen very often.  My recollection is that it is either caused by a job blowing up spectacularly (e.g. a memory leak in the program being launched by Tidal) or someone doing something atypical with the client.

  • How to remove cover page from hp3530 for all?

    how to remove cover page from hp3530 for all?

    Hi there Vari,
    Can you give us a little more information to help out? Is this a 3530 Deskjet printer or the 3530c scanner? Is this cover page for a fax?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Create a number range for job keys

    We have different business units within our company and would like te set up different number ranges for the job keys that are generated on the organizational data for the different business units.
    My steps to create a job key is as follows:
    - Go to transaction PP01
    - Select "Job" on Object Type field
    - Select "Object" under Infotype Name on the Active tab and click on create.
    - I now create my Object abbreviation and object name
    - When I save, the screen returns to PPO1 and the Object ID field now have a job key number in (which is linked to the Position number and displayed on IT0001).  The number is e.g. 60000000
    My question is, that if we are creating a new object ID for  e.g. for Business Unit 1, we would like the Object ID to generate a number in the number range e.g. 60000000 - 69999999
    If we we are creating a new object ID for e.g. for Business Unit 2, we would like the Object ID to generate a number in the number range e.g. 70000000 - 79999999
    Etc.
    Is it possible to do something like this as there is no indication on PP01 as to what Business Unit you are creating this Object ID for and therefore it would not know what number range to allocate.
    Is there perhaps someone that is doing it this way and who has a solution for me.
    Regards
    Helmien

    Hi helmien vanrenen ,
    Go for transaction code OONC or table T77S0 and group NUMRG  COMP Do not enter value.
    Next step is go to transaction code OONR here you can assign the different number ranges for different Object Types.
    Warm Regards,
    Kapil Kaushal

  • How can be create a property grid for adobe illustrator?

    Hi all,
    Actually i want to create one custom plugin for the adobe illustrator where i can show all the properties of the selected item (exp : path item, text frames, or placed images).  This is very similar look like Visual studio or any other IDE.
    any one have any idea or did similar kind of stuff ?
    please me
    Regards
    Ashish yadav.

    Search for and download the SDK for developing plug-ins.
    JET

  • In the SSHR from "Apply for Job" functionality cant upload docx CV

    From employee self service responsibility when I use the functionality "Apply for job"
    While trying to upload a docx file I am getting the below error message
    Value application/vnd.openxmlformats-officedocument.wordprocessingml.document exceeds the maximum allowed value (VARCHAR (30, -127))
    The doc files can be uploaded.
    regards

    As my understanding, This would be not configurable using personlization. you need to OA Framework customization to have Message Choice for Job and Search Filteration.
    Thankss

  • How to remove 'Create new employee' option for a scenario in org modelling?

    Hi Luke,
    We want to remove 'create new employee' option that appears under 'actions' in details panel for a position in scenario (for org chart).
    I checked in linkconfiguration folder for position, but it doesn't show this option to be disabled. I also checked detailspresentationconfiguration folder but no luck. I am assuming, it must be pretty different to achieve this for a scenario object.
    Please help!
    Thanks,
    Prashant

    Hi Prashant,
    I'm not entirely sure this can be changed. It doesn't appear to be controlled through configuration or XSL. My guess is it is hard-coded.
    Sorry I can't be of more help.
    Best regards,
    Luke

  • Remove Following people from mysite for all users

    [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.Office.Server")
    $web = Get-SPWeb https://www.contoso.com/teams/yourteam
    $context = [Microsoft.SharePoint.SPServiceContext]::GetContext([Microsoft.SharePoint.SPSite]$web.Site)
    $upm = New-Object Microsoft.Office.Server.UserProfiles.UserProfileManager $context
    $users = $web.AssociatedMemberGroup.Users | where IsDomainGroup -eq $false
    $useraccounts = $users | select loginname | Foreach {"$($_.loginname)"}
    foreach ($user in $users) {
    $profile = $upm.GetUserProfile($user.UserLogin)
    #$objectToFollowRelativeToWeb = "/"
    if ($profile)
    #Create a Social Manager profile
    #SPSocialFollowingManager
    $followManager = New-Object Microsoft.Office.Server.Social.SPSocialFollowingManager($profile, $context)
    $following = $followManager.GetFollowed([Microsoft.Office.Server.Social.SPSocialActorTypes]::Users)
    for ($i=$following.Count - 1; $i -ge 0; $i--) {
    $followed = $following[$i]
    $acctname = $followed.AccountName
    #if claims:
    $acctname = 'i:0#.w|'+$acctname
    if ($acctname -iin $useraccounts ) {
    [Microsoft.Office.Server.Social.SPSocialFollowResult]$res = $followManager.StopFollowing($followed)
    Write-Verbose "$($user.UserLogin) stop following $acctname result is $res"
    I have the above script from one of the technet solution to remove followeronly  for Contributors from MySite. I want this script to run for all user and remove all existing association. Can someone help me update this script.
    Thanks Ba$va

    Hi Basva,
    According to your description, my understanding is that you want to remove all existing association for all users
    The $users = $web.AssociatedMemberGroup.Users | where IsDomainGroup -eq $false is to get all users in Contributors group. You can change the line to
    $users = $web.AllUsers, then run the script, compare the result.
    Here is an post for getting all users using PowerShell, please take a look at:
    http://www.sharepoint2013.me/Blog/Post/160/Get-all-the-unique-users-in-a-farm-using-PowerShell-script
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • How i  create choose from list for profit center

    Hello ALL ,
    Can any body suggest me how we  create the CFL for profit Center  .
    I am creating  add -on using sdk and create a screen form using screen Painter .
    In my form there is  matrix that contain the profit center column  just like in sale order screen .
    In this field (Profit Center )  I want to attach the CFL of profit center just like in sales Order screen .
    but  I am unable to find out the object type ID for profit center so please give me any idea

    Hi,
    Please post is on the SDK forum and close this thread.  This is an SDK question.
    Thanks,
    Gordon

  • Acrobat XI will not create PDF from word for Mac

    I'm on a late 2013 macbook air, running Mountain lion, office for mac 20011 and acrobat XI pro.  In acrobat, when I go to file, create pdf and navigate to a word doc, acrobat will not creat the pdf.  I get an error message that reads someting like "acrobat could not open test.docx because it is not a supported file type."  Create pdf works with other file types. I can create PDF by using the Save As in Word, but that is besides the point. I bought Acrobat in order to process many word and excel files into on PDF-file easily and currently that is not possible. Anyone?

    This is possible on Windows.

  • Can anyone explain how we create Choose from list for profit center in sap b1

    Hello ALL ,
    Can any body suggest me how we create the CFL for profit Center .
    I am creating add -on using sdk and create a screen form using screen Painter .
    In my form there is matrix that contain the profit center column just like in sale order screen .
    In this field (Profit Center ) I want to attach the CFL of profit center just like in sales Order screen .
    but I am unable to find out the object type ID for profit center so please give me any idea

    Hi Arvind,
    Object type for the Profit Center is
    <ChooseFromList UniqueID="CFL_1" ObjectType="61" MultiSelection="0" IsSystem="0"/>
    and for the Distribution Rule
    <ChooseFromList UniqueID="CFL_2" ObjectType="62" MultiSelection="0" IsSystem="0"/>
    Hope it helps.
    D.

  • Creating dll from Labview for use in VB

    In this document:
    Accessing LabVIEW 6.0 Strings from Microsoft Visual Basic
    It mentions you need to input a length for your string inputs. When I create my dll no len is available for string parameters only Arrays. Is this a typo?
    Also, In my LV code I have a path input. Can VB work with this? I have already converted my LV code to accept path as string...just wondering if I really have to do that.

    Drugar,
    Only string outputs (indicators) that are wired on the connector pane will show the length parameter selection when you try to build the dll.
    I don't think VB accepts paths, so you should convert the path to string in LabVIEW before building the dll.
    Zvezdana S.

  • Creating PDFs from BDC for VL01N

    Hi,
    I've to create PDFs for the deliveries which are being created in a BDC program.With some setting in config (which I'm unaware about,) as soon as the delivery is created, the output gets printed. I need to download the print preview at the same time at the desktop in PDF format. (The BDC program uses CALL TRANSACTION  'VL01N').
    Can you please help me knowing how can I fetch the spool no in this case to feed it to the FM used to convert the data into PDF from spool no?
    Thanks.
    Chinmay.

    This is a Quark problem - have you thought of using Adobe InDesign
    (since it's an Adobe application)?
    Jon

  • Creating attachments from Services for Objects

    Hi,
    I am trying to create an attachment using the FM BDS_BUSINESSDOCUMENT_CREATEF. But it is giving me sy-subrc 4(ERROR_KPRO). Can anyone explain how to correct this and if u have any better code to attach files to BO's pls post it here.
    This is my code:
    DATA : files LIkE BAPIFILES OCCURS 1 WITH header line.
    files-doc_count = '1'.
    files-directory = 'C:\Documents and Settings\e529015\Desktop\'.
    files-filename = 'layout.jpeg'.
    APPEND files.
    data: lv_logsys type TBDLS-LOGSYS.
    CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
    IMPORTING
       OWN_LOGICAL_SYSTEM                   = lv_logsys
    EXCEPTIONS
       OWN_LOGICAL_SYSTEM_NOT_DEFINED       = 1
       OTHERS                               = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'BDS_BUSINESSDOCUMENT_CREATEF'
      EXPORTING
       LOGICAL_SYSTEM        = lv_logsys
        classname             = 'BUS2038'
        classtype             = 'BO'
       CLIENT                = SY-MANDT
       OBJECT_KEY            = '300023662'
      tables
        files                 = files
      SIGNATURE             =
    EXCEPTIONS
       NOTHING_FOUND         = 1
       PARAMETER_ERROR       = 2
       NOT_ALLOWED           = 3
       ERROR_KPRO            = 4
       INTERNAL_ERROR        = 5
       NOT_AUTHORIZED        = 6
       OTHERS                = 7
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Best Regards,
    Pavan Jhawar.

    Hi,
    Check this code...
    DATA: NUMBER_ATTACH TYPE i.
    Data Declaration for attachment ********
    data: go_myobject type ref to cl_gos_manager.
    data: lo_container type ref to cl_gui_custom_container,
          ls_object type borident.
    MODULE ATTACH_FILE input.
    if ok_code = 'CATC'.
      IF ZQTHD-JNAME is not initial.
    *******Number Ranges For ATTACHMENT ********
      if zqthd-objectkey is initial.
    CALL FUNCTION 'NUMBER_GET_NEXT'
      EXPORTING
        NR_RANGE_NR                   = '1'
        OBJECT                        = 'ZATTACH_NR'
      QUANTITY                      = '1'
      SUBOBJECT                     = ' '
      TOYEAR                        = '0000'
      IGNORE_BUFFER                 = ' '
    IMPORTING
       NUMBER                        = NUMBER_ATTACH
      QUANTITY                      =
      RETURNCODE                    =
    EXCEPTIONS
      INTERVAL_NOT_FOUND            = 1
      NUMBER_RANGE_NOT_INTERN       = 2
      OBJECT_NOT_FOUND              = 3
      QUANTITY_IS_0                 = 4
      QUANTITY_IS_NOT_1             = 5
      INTERVAL_OVERFLOW             = 6
      BUFFER_OVERFLOW               = 7
      OTHERS                        = 8
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
       endif.
      zqthd-objectkey = NUMBER_ATTACH.
      ls_object-objtype = 'ZQUOTATION'.
      ls_object-objkey  = zqthd-objectkey.
      call method go_myobject->start_service_direct
                    exporting
                          ip_service = 'PCATTA_CREA'
                          is_object = ls_object
                          io_container = lo_container.
    ENDIF.
    endif.

  • R12 KB remove 'Create Service Request' Button for Guest user

    We are running Oracle eBusiness 12.1.3
    Whenever someone is not logged in and visits our KB they are of course logged in as GUEST.
    Currently when viewing a KB solution there is a button that says Create Service Request.
    We are looking to remove/hide that button from this page, what is the profile option to do this?
    Thank you

    Have you tried to use personalization? -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Personalization+AND+Hide+AND+button&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

Maybe you are looking for