Remove digits from incoming DID number
How translation rule can i use to remove 6 digits of DID number received from ITSP and pass on 4 digits to the PABX (integrated with ISDN pri ) on cisco voice gateway.
The incoming dial peer is voip dial peer because call is coming from ITSP using SIP.
For eg DID number range is 0419137101 - 0419137599
If I follow, I believe you could use something like this:
voice translation-rule 1
rule 1 /.+\(....\)/ /\1/
voice translation-profile strip6
translate called 1
dial-peer voice 1 voip ! Inbound SIP dialpeer
translation-profile incoming strip6
Similar Messages
-
TS4268 How do I remove iMessage from my phone number?
How do I remove iMessage from my phone number?
Settings>>>Message>> Turn iMessage OFF
-
Unable to join Meet me conference from outside (DID) number
Hi,
Would anyone help to fix below!
What I'm trying to do?
- I'm working on meet me. Meet me pattern is 2222 and is obsolutly working fine internally. I used 2222 (DID) number so anyone can join conference from outside by dialing DID number 2222.
Issue.
- When i try to join Meet me conference by dialing DID it gives busy tone. Unable to join.
Is there something to do with transcode??
- I have already a transcode in CUCM and registered with Gateway
BR
SamHi Manish,
Below debug details:
Calling number : 583125185 my Mobile
Called Number : 2287797 ( Meet me Pattern )
*Mar 26 08:46:08.176: //-1/E89798C3B280/CCAPI/cc_api_display_ie_subfields:
cc_api_call_setup_ind_common:
cisco-username=583125185
----- ccCallInfo IE subfields -----
cisco-ani=583125185
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=0
dest=2287797
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=0
cisco-rdnplan=0
cisco-rdnpi=-1
cisco-rdnsi=-1
cisco-redirectreason=-1 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
*Mar 26 08:46:08.176: //-1/E89798C3B280/CCAPI/cc_api_call_setup_ind_common:
Interface=0x3C90FA24, Call Info(
Calling Number=583125185,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=2287797(TON=Unknown, NPI=Unknown),
Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE,
Incoming Dial-peer=5001, Progress Indication=NULL(0), Calling IE Present=TRUE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALSE), Call Id=27631
*Mar 26 08:46:08.176: //-1/E89798C3B280/CCAPI/ccCheckClipClir:
In: Calling Number=583125185(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
*Mar 26 08:46:08.176: //-1/E89798C3B280/CCAPI/ccCheckClipClir:
Out: Calling Number=583125185(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
*Mar 26 08:46:08.176: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Mar 26 08:46:08.176: :cc_get_feature_vsa malloc success
*Mar 26 08:46:08.176: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Mar 26 08:46:08.176: cc_get_feature_vsa count is 3
*Mar 26 08:46:08.176: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Mar 26 08:46:08.176: :FEATURE_VSA attributes are: feature_name:0,feature_time:1101743440,feature_id:1929
*Mar 26 08:46:08.176: //27631/E89798C3B280/CCAPI/cc_api_call_setup_ind_common:
Set Up Event Sent;
Call Info(Calling Number=583125185(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=2287797(TON=Unknown, NPI=Unknown))
*Mar 26 08:46:08.176: //27631/E89798C3B280/CCAPI/cc_process_call_setup_ind:
Event=0x3CB041D0
*Mar 26 08:46:08.176: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
Try with the demoted called number 2287797
*Mar 26 08:46:08.180: //27631/E89798C3B280/CCAPI/ccCallSetContext:
Context=0x22CD2400
*Mar 26 08:46:08.180: //27631/E89798C3B280/CCAPI/cc_process_call_setup_ind:
>>>>CCAPI handed cid 27631 with tag 5001 to app "_ManagedAppProcess_Default"
*Mar 26 08:46:08.180: //27631/E89798C3B280/CCAPI/ccCallProceeding:
Progress Indication=NULL(0)
*Mar 26 08:46:08.180: //27631/E89798C3B280/CCAPI/ccCallSetupRequest:
Destination=, Calling IE Present=TRUE, Mode=0,
Outgoing Dial-peer=100, Params=0x22CDF0B0, Progress Indication=NULL(0)
*Mar 26 08:46:08.180: //27631/E89798C3B280/CCAPI/ccCheckClipClir:
In: Calling Number=583125185(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
*Mar 26 08:46:08.180: //27631/E89798C3B280/CCAPI/ccCheckClipClir:
Out: Calling Number=583125185(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
*Mar 26 08:46:08.180: //27631/E89798C3B280/CCAPI/ccCallSetupRequest:
Destination Pattern=22877.., Called Number=2287797, Digit Strip=FALSE
*Mar 26 08:46:08.180: //27631/E89798C3B280/CCAPI/ccCallSetupRequest:
Calling Number=583125185(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=2287797(TON=Unknown, NPI=Unknown),
Redirect Number=, Display Info=
Account Number=583125185, Final Destination Flag=TRUE,
Guid=E89798C3-B3F9-11E3-B280-F273590C9FA3, Outgoing Dial-peer=100
*Mar 26 08:46:08.180: //27631/E89798C3B280/CCAPI/cc_api_display_ie_subfields:
ccCallSetupRequest:
cisco-username=583125185
----- ccCallInfo IE subfields -----
cisco-ani=583125185
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=0
dest=2287797
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=0
cisco-rdnplan=0
cisco-rdnpi=-1
cisco-rdnsi=-1
cisco-redirectreason=-1 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
*Mar 26 08:46:08.180: //27631/E89798C3B280/CCAPI/ccIFCallSetupRequestPrivate:
Interface=0x3C90FA24, Interface Type=3, Destination=, Mode=0x0,
Call Params(Calling Number=583125185,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=2287797(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE, Outgoing Dial-peer=100, Call Count On=FALSE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Application Call Id=)
*Mar 26 08:46:08.180: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Mar 26 08:46:08.180: :cc_get_feature_vsa malloc success
*Mar 26 08:46:08.180: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Mar 26 08:46:08.180: cc_get_feature_vsa count is 4
*Mar 26 08:46:08.180: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Mar 26 08:46:08.180: :FEATURE_VSA attributes are: feature_name:0,feature_time:1101742096,feature_id:1930
*Mar 26 08:46:08.180: //27632/E89798C3B280/CCAPI/ccIFCallSetupRequestPrivate:
SPI Call Setup Request Is Success; Interface Type=3, FlowMode=1
*Mar 26 08:46:08.180: //27632/E89798C3B280/CCAPI/ccCallSetContext:
Context=0x22CDF060
*Mar 26 08:46:08.180: //27631/E89798C3B280/CCAPI/ccSaveDialpeerTag:
Outgoing Dial-peer=100
*Mar 26 08:46:08.180: //27632/E89798C3B280/CCAPI/ccGetMediaClassTag:
media class tag 0
*Mar 26 08:46:08.180: //27632/E89798C3B280/CCAPI/ccSetMediaclassIp2ipTags:
media class tags set: NR 0, ASP 0
*Mar 26 08:46:08.180: //27631/E89798C3B280/CCAPI/ccGetMediaClassTag:
media class tag 0
*Mar 26 08:46:08.180: //27631/E89798C3B280/CCAPI/ccSetMediaclassIp2ipTags:
media class tags set: NR 0, ASP 0
*Mar 26 08:46:08.180: //27632/E89798C3B280/CCAPI/ccGet_xc_nr_asp_info:
media class tags: NR 0, ASP 0
*Mar 26 08:46:08.180: //27631/E89798C3B280/CCAPI/ccGet_xc_nr_asp_info:
media class tags: NR 0, ASP 0
*Mar 26 08:46:08.180: //27632/E89798C3B280/CCAPI/cc_api_event_indication:
Event=188, Call Id=27632
*Mar 26 08:46:08.180: //27632/E89798C3B280/CCAPI/cc_api_event_indication:
Event Is Sent To Conferenced SPI(s) Directly
*Mar 26 08:46:08.180: //27631/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.180: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.180: //27632/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.180: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.184: //27631/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.184: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.184: //27631/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.184: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.184: //27632/E89798C3B280/CCAPI/cc_api_call_proceeding:
Interface=0x3C90FA24, Progress Indication=NULL(0)
*Mar 26 08:46:08.184: //27632/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.184: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.184: //27631/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.184: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.184: //27632/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.184: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.184: //27632/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.184: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.200: //27632/E89798C3B280/CCAPI/cc_api_call_disconnected:
Cause Value=1, Interface=0x3C90FA24, Call Id=27632
*Mar 26 08:46:08.200: //27632/E89798C3B280/CCAPI/cc_api_call_disconnected:
Call Entry(Responsed=TRUE, Cause Value=1, Retry Count=0)
*Mar 26 08:46:08.200: //27631/E89798C3B280/CCAPI/ccCallReleaseResources:
release reserved xcoding resource.
*Mar 26 08:46:08.200: //27632/E89798C3B280/CCAPI/ccCallSetAAA_Accounting:
Accounting=1, Call Id=27632
*Mar 26 08:46:08.200: //27632/E89798C3B280/CCAPI/ccCallDisconnect:
Cause Value=1, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=1)
*Mar 26 08:46:08.200: //27632/E89798C3B280/CCAPI/ccCallDisconnect:
Cause Value=1, Call Entry(Responsed=TRUE, Cause Value=1)
*Mar 26 08:46:08.200: //27632/E89798C3B280/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x3C90FA24, Tag=0x0, Call Id=27632,
Call Entry(Disconnect Cause=1, Voice Class Cause Code=0, Retry Count=0)
*Mar 26 08:46:08.200: //27632/E89798C3B280/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
*Mar 26 08:46:08.200: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
*Mar 26 08:46:08.200: :cc_free_feature_vsa freeing 41AB4008
*Mar 26 08:46:08.200: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
*Mar 26 08:46:08.200: vsacount in free is 3
*Mar 26 08:46:08.200: //27631/E89798C3B280/CCAPI/ccCallSetupRequest:
Destination=, Calling IE Present=TRUE, Mode=0,
Outgoing Dial-peer=5000, Params=0x22CCBE20, Progress Indication=NULL(0)
*Mar 26 08:46:08.200: //27631/E89798C3B280/CCAPI/ccCheckClipClir:
In: Calling Number=583125185(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
*Mar 26 08:46:08.204: //27631/E89798C3B280/CCAPI/ccCheckClipClir:
Out: Calling Number=583125185(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed)
*Mar 26 08:46:08.204: //27631/E89798C3B280/CCAPI/ccCallSetupRequest:
Destination Pattern=.T, Called Number=2287797, Digit Strip=FALSE
*Mar 26 08:46:08.204: //27631/E89798C3B280/CCAPI/ccCallSetupRequest:
Calling Number=583125185(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=2287797(TON=Unknown, NPI=Unknown),
Redirect Number=, Display Info=
Account Number=583125185, Final Destination Flag=TRUE,
Guid=E89798C3-B3F9-11E3-B280-F273590C9FA3, Outgoing Dial-peer=5000
*Mar 26 08:46:08.204: //27631/E89798C3B280/CCAPI/cc_api_display_ie_subfields:
ccCallSetupRequest:
cisco-username=583125185
----- ccCallInfo IE subfields -----
cisco-ani=583125185
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=0
dest=2287797
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=0
cisco-rdnplan=0
cisco-rdnpi=-1
cisco-rdnsi=-1
cisco-redirectreason=-1 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
*Mar 26 08:46:08.204: //27631/E89798C3B280/CCAPI/ccIFCallSetupRequestPrivate:
Interface=0x3C90FA24, Interface Type=3, Destination=, Mode=0x0,
Call Params(Calling Number=583125185,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=2287797(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE, Outgoing Dial-peer=5000, Call Count On=FALSE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Application Call Id=)
*Mar 26 08:46:08.204: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Mar 26 08:46:08.204: :cc_get_feature_vsa malloc success
*Mar 26 08:46:08.204: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Mar 26 08:46:08.204: cc_get_feature_vsa count is 4
*Mar 26 08:46:08.204: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
*Mar 26 08:46:08.204: :FEATURE_VSA attributes are: feature_name:0,feature_time:1101742096,feature_id:1931
*Mar 26 08:46:08.204: //27633/E89798C3B280/CCAPI/ccIFCallSetupRequestPrivate:
SPI Call Setup Request Is Success; Interface Type=3, FlowMode=1
*Mar 26 08:46:08.204: //27633/E89798C3B280/CCAPI/ccCallSetContext:
Context=0x22CCBDD0
*Mar 26 08:46:08.204: //27631/E89798C3B280/CCAPI/ccSaveDialpeerTag:
Outgoing Dial-peer=5000
*Mar 26 08:46:08.204: //27633/E89798C3B280/CCAPI/ccGetMediaClassTag:
media class tag 0
*Mar 26 08:46:08.204: //27633/E89798C3B280/CCAPI/ccSetMediaclassIp2ipTags:
media class tags set: NR 0, ASP 0
*Mar 26 08:46:08.204: //27631/E89798C3B280/CCAPI/ccGetMediaClassTag:
media class tag 0
*Mar 26 08:46:08.204: //27631/E89798C3B280/CCAPI/ccSetMediaclassIp2ipTags:
media class tags set: NR 0, ASP 0
*Mar 26 08:46:08.204: //27633/E89798C3B280/CCAPI/ccGet_xc_nr_asp_info:
media class tags: NR 0, ASP 0
*Mar 26 08:46:08.204: //27631/E89798C3B280/CCAPI/ccGet_xc_nr_asp_info:
media class tags: NR 0, ASP 0
*Mar 26 08:46:08.204: //27633/E89798C3B280/CCAPI/cc_api_event_indication:
Event=188, Call Id=27633
*Mar 26 08:46:08.204: //27633/E89798C3B280/CCAPI/cc_api_event_indication:
Event Is Sent To Conferenced SPI(s) Directly
*Mar 26 08:46:08.204: //27631/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.204: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.204: //27633/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.204: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.204: //27631/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.204: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.204: //27631/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.204: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.204: //27633/E89798C3B280/CCAPI/cc_api_call_proceeding:
Interface=0x3C90FA24, Progress Indication=NULL(0)
*Mar 26 08:46:08.208: //27633/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.208: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.208: //27631/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.208: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.208: //27633/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.208: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.208: //27633/xxxxxxxxxxxx/CCAPI/cc_api_get_xcode_stream:
*Mar 26 08:46:08.208: cc_api_get_xcode_stream : 4819
*Mar 26 08:46:08.280: //27633/E89798C3B280/CCAPI/cc_api_call_disconnected:
Cause Value=28, Interface=0x3C90FA24, Call Id=27633
*Mar 26 08:46:08.280: //27633/E89798C3B280/CCAPI/cc_api_call_disconnected:
Call Entry(Responsed=TRUE, Cause Value=28, Retry Count=0)
*Mar 26 08:46:08.280: //27631/E89798C3B280/CCAPI/ccCallReleaseResources:
release reserved xcoding resource.
*Mar 26 08:46:08.280: //27633/E89798C3B280/CCAPI/ccCallSetAAA_Accounting:
Accounting=0, Call Id=27633
*Mar 26 08:46:08.280: //27633/E89798C3B280/CCAPI/ccCallDisconnect:
Cause Value=28, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=28)
*Mar 26 08:46:08.280: //27633/E89798C3B280/CCAPI/ccCallDisconnect:
Cause Value=28, Call Entry(Responsed=TRUE, Cause Value=28)
*Mar 26 08:46:08.284: //27633/E89798C3B280/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x3C90FA24, Tag=0x0, Call Id=27633,
Call Entry(Disconnect Cause=28, Voice Class Cause Code=0, Retry Count=0)
*Mar 26 08:46:08.284: //27633/E89798C3B280/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
*Mar 26 08:46:08.284: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
*Mar 26 08:46:08.284: :cc_free_feature_vsa freeing 41AB4008
*Mar 26 08:46:08.284: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
*Mar 26 08:46:08.284: vsacount in free is 3
*Mar 26 08:46:08.284: //27631/E89798C3B280/CCAPI/ccCallDisconnect:
Cause Value=28, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
*Mar 26 08:46:08.284: //27631/E89798C3B280/CCAPI/ccCallDisconnect:
Cause Value=28, Call Entry(Responsed=TRUE, Cause Value=28)
*Mar 26 08:46:08.300: //27631/E89798C3B280/CCAPI/cc_api_call_disconnect_done:
Disposition=0, Interface=0x3C90FA24, Tag=0x0, Call Id=27631,
Call Entry(Disconnect Cause=28, Voice Class Cause Code=0, Retry Count=0)
*Mar 26 08:46:08.300: //27631/E89798C3B280/CCAPI/cc_api_call_disconnect_done:
Call Disconnect Event Sent
*Mar 26 08:46:08.300: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
*Mar 26 08:46:08.300: :cc_free_feature_vsa freeing 41AB4548
*Mar 26 08:46:08.300: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
BR
Sami -
Help removing imessage from a phone number no longer being used by an iphone
Hi everyone. Hoping for some help with a bizarre issue. I switched from an iphone 3gs to an android a few months ago, but when some (not all) friends w/ iphone's text me, it tries to send it as an imessage from their phones. I don't receive the texts for hours at a time. Is there something I can do to prevent this? Or is on their end? This has even happened with people who I have exchanged numbers with well after I made the switch from iphone to android which I find particularly weird.
If you still have your 3GS put your SIM back in it and turn off iMessage. If you don't have it but you did register it with Apple, do this:
Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in
Click on "edit products"
Click on the "x" to the right of the product
Click "unregister"
This deactivates number with iMessage. -
Remove Digits from Layer Comp to Files Export
Hello,
Is there a quick way to remove the beginning of the string when running the Layer Comps to Files script? For example if the layer comp is named picture-of-tree, the exported files have _00001_picture-of-tree. I just need the resulting file name to be what is exactly in the layer comp text title: picture-of-tree.
Any info would be great.jerseygirl505 wrote:
How can I edit the code so that:
- not only are there no numbers, the "_" is gone too... right now, with deleting that zeroSuppress line, the files are saving as "_filename_layercompname.jpg"
OR
- if I do choose to include the numbering, but want the numbers to start at 01 instead of 00?
Thanks!
Just removing line 189 "fileNameBody += "_" + zeroSuppress(compsIndex, 4);" will only remove the 4 digit numbers and it’s leading underscore. Your result might be caused by an empty file name prefix.
If you would like to have the numbering start at 01 with two digits only - you simply have to change the zeroSuppress function call:
fileNameBody += "-" + zeroSuppress(compsIndex+1, 2);
The first parameter "compsIndex+1" will force to start with 1 instead of 0.
The second parameter "2" does control the number of digits returned by the function.
I already adopted your idea of starting with 01 in my version of the script:
http://dl.dropbox.com/u/1037999/Adobe%20Scripts/Layer%20Comps%20To%20Files.jsx -
Removing Text From Incoming Subject Line
My ISP automatically adds "*SPAM*" to the subject line of e-mails it suspects of being spam. It's a great feature, but as can be expected, sometimes it marks a message that isn't spam. Is there a way to automatically remove the tag from e-mails that meet certain criteria, i.e.: the sender is a previous recipient?
Mail doesn't allow any editing of received messages. Mail Tags may be able to help, but I don't think so.
AK -
REPLACE statement removing commas from a money convert... I do NOT want it to do this
I am using a case statement to remove the '-' from a negative number and place a '(' there instead.
The negative side of the CASE statement is as follows:
REPLACE(CONVERT(varchar, CONVERT(money, SUM(Begin_Balance)), 1), '-', '(') + ')'
The positive side is:
CONVERT(varchar, CONVERT(money, SUM(Begin_Balance)), 1)
The data output for the positive portion is 100% correct. Here is an example of the output I receive.
(18271.15)
(25000.00)
82,490.00
45,000.00
Why is the replace statement stripping my commas?>> I am using a case statement to remove the '-' from a negative number and place a '(' there instead. <<
So many horrible fundamental errors in one sentence!
1. CASE is an expression, not a statement. An expression returns a scalar value of a known data type, A statement changes the schema.
2. In SQL, all display formatting is done in a presentation layer, never in the database.
3. We use the ANSI/ISO Standard CAST() and not the old Sybase/Unix CONVERT today
4. We use DECIMAL() and not the old Sybase/Unix MONEY. This thing does not work; it fail to do correct math; Google it! Do a data audit and see if you can go to jail for this.
5. SQL is not COBOL. The COBOL language treats all data as strings. STOP DOING THAT IN SQL! This language uses abstraction in the database and the presentation does the job that your old PICTURE clause used to do.
Can you get a 2-3 week intro course to SQL and modern programming form your company?
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL -
Did not know simple things such as removing hyphen from phone numbers will be so complicated. How do i remove the hyphen from stored phone numbers since i am not able to make a phone call using MobileVOIP. Everytime i make a phone call i have to type the number.
Go into your contacts and edit them.
-
Can someone please help me to remove an iphone telephone number from my imessage application. I no longer have a phone which I registered on my apple ID as a second phone. I have been on my apple ID and it does not seem to be there but cannot remove it from imessage, which still has it as an option to connect to. I am concerned that someone else who inherite this old phone will see my messages if I accidentally enable it again. I have read and re-read various postings and tried all options given but no luck, the **** thing stays there.....
Hey Chappers64!
Here is an article that will help you with this issue:
iOS: Deactivating iMessage
http://support.apple.com/kb/ts5185
If you have already tried these steps, you will want to utilize the information at the end of the article:
If you can't deactivate iMessage after you perform the steps above or you can't access the iPhone, please contact Apple Support.
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
i got a few free app before and did not download them completely and dont want to do this
but they stay in my download list and start automatly when i connect to itunes store and going to crazy me
how can i remove them from my account for ever
please help meTry Here > https://discussions.apple.com/thread/4074945?tstart=0
-
I would like to remove the icons that came preloaded when I did the update for ios7. The Disney, yahoo, Espn etc. these icons aren't in my bookmarks so how do I remove them from my safari home screen? Can anyone help?
I am trying to figure this out as well. It is really frustrating. I wish I could go back to iOS 6 this *****
-
I did'nt created an apple id and someother is using my fake id how do i remove it from my device?
Sorry. You need to rephrase the question or post in your native language. This doesn't make any sense at all.
-
I am a cityville game player on facebook and for some reason today I am unable to send out blasted on the game when if fact this was never a problem. Finally I went to internet explorer and the same problem happen, but internet explorer let me know that the content was blocked. All I had to do was unblock it and that was easy and know I can blast out. However trying to remove the block from fire fox is a issue. I went into to tools and removed every block and it still want work right. Therefore, how to remove block from trusted web site. I did the obvious by pasting the web address in the allow content area under tools options. What are the other ways
Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about ASP.NET website programming, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
hi
i got a few free app before and did not download them completely and dont want to do this
but they stay in my download list and start automatly when i connect to itunes store and going to crazy me
how can i remove them from my account for ever
please help me
thank youTry Here > https://discussions.apple.com/thread/4074945?tstart=0
-
Why am I seeing outgoing and incoming text from another phone number that is on my plan?
Why am I seeing outgoing and incoming text from another phone number that is on my plan?
That is why. If you take the time to go into Settings>Messages>Send and Receive. Then uncheck everything but the phone number for each particular device, you should be alright after that.
Maybe you are looking for
-
Problem with Alt Text output from thumbnail image of Lightbox widget
I'm having a problem with the Lightbox widget not producing alternative text based on the image properties. I've set ALT text for the image properties on both the larger Ligtbox image as well as the thumbnail. But the HTML output from Muse does not
-
Like to order physical cd for hp photosmart all in one 2575 printer for windows vista pls.
i have got this printer and using it by downloading software online but like to order physical cd which will be easier for me to use rather than downloading every 3 months. and registering online which can be a bit of pain. how much would it be in nz
-
ITunes error when typing out the letters of the band to search
I've been using iTunes since it debuted and I've always would not use the search function to find what band I wanted to hear but rather just type out the first 1-3 letters and it would take me there faster. This new iTunes update has screwed that up.
-
AC-00023: Error: Exception: java.io.FileNotFoundException
Hi, We are using Oracle Apps 11i on Windows 2003. Sometimes when I run autoconfig on Application Tier I get the following error. This happens when Maintenance Mode is Enabled. But sometimes happens even when the Maintenance Mode is Disabled. Sometime
-
Setting Table Cell Renderer for a row or cell
I need to make a JTable that has the following formats: Row 1 = number with no decimals and columns Row 2 = number with no decimals and columns Row 3 = percent with 4 decimals I can use a table cell renderer to set each COLUMN as one or the other for