Remove Ignore button in FFCS error message

We are a high school in the Netherlands with around 10000 workstations and all of them run Microsoft Forefront Client Security.
Last week we noticed a problem with the FFCS. When we plugin an USB device and want to run a program (which has a virus in it) it gives an FFCS error message with an ignore button which can be clicked and after that the program/virus will be running.
Also when a program is downloaded from the internet it also gives an FFCS error with an ignore button. After clicking it, the program/virus runs.
Is there any way to remove the ignore button from the error screen so that the exit button is the only thing they can click on? Perhaps trough a policy or reg setting?

The problem is when we click on Ignore the programs runs and shoots it's exploit(s) into the PC system without any interference from FFCS afterwards. This problem has been discovered by an ethical hacker when he tested one of our programs.
It is a problem of FFCS. It should stop running programs from USB or downloaded from the net. Why does it give the option to ignore the error?
So what we want is when a student tries to run a program from USB that FFCS gives an error message that it cannot run programs from USB and only an OK button. Is that hard coded in FFCS? If so, where can I file in a complaint to dev team of FFCS?
 

Similar Messages

  • After writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present

    after writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present.
    My pc is based on asus motherboard. Labview 7 and Windows 2000 sp4 installed.
    The error message continue also if i stop the application that generated report on a: .
    I've got this problem only on a pc: on other machines i don't have this problem (Labview only continues to access floppy but it doesn't show any window).
    Find below an example: first press the button to create a report on a: then remove the floppy, after 30-35 sec i've got the error message
    Attachments:
    prova.vi ‏55 KB

    Hi,
    I tried your vi: I don't get any error message after removing the disk but LV7 keeps on accessing the drive at regular intervals even if you stop the vi and close it!!! This is not supposed to happen.
    The only way to stop it is exit LV7.
    If you don't use the file dialog and you wire a full path, you don't get any problem.
    I also created a very simple vi that conditionally writes a text file on a: and I got the same behaviour.
    This problem occurs only with LV7, I tried the same examples in LV6.1 and everything was fine.
    If anybody wants to try I attach this simple example,
    Alberto
    Attachments:
    salva_testo1.vi ‏22 KB

  • Firefox doesn't exit properly. Please put a button on your error message to close it. I'm tired of having to remove and restart.

    This seems to be a recurring problem with many of us. Every day I have to force an exit to Firefox (3.612) and restart it. None of the suggestions made for fixing it help (extensions etc). How about taking that error message and putting a button on it that stops Firefox and restarts it? Click and done. If we can't fix it, work around!
    Thanks.

    Some possibilities are suggested in the "Hang at exit" section of this article:
    http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
    There's quite a bit to work through there.

  • How to handle OK button in faces error message

    Hi everyone,
    Iam using Jdev 11.1.2.0. I have a scenario where faces error message will be displayed . After clicking ok button, some validation should be done . If iam using popup with dialog, i can handle my requirement using java script but now my scenario is with faces message . Kindly suggest me how to get hook for the button OK in faces message. Thanks in advance.
    Regards
    Alekhya

    As Frank said, it does not allow customization.Instead of Faces message you can use an popup with dialog.use dialog listener in ok button
    like
    public void dialogListener1(DialogEvent dialogEvent) 
        if (dialogEvent.getOutcome() == DialogEvent.Outcome.ok)
         // write your custom code for ok event
        } else
          // write your custom code for cancel event
    read more on http://www.techartifact.com/blogs/2013/03/handling-ok-and-cancel-button-in-afdialog-using-popup-in-oracle-adf-by-dialogl…

  • "Get Variants" button disabled after error message in AT SELECTION SCREEN

    Hi,
    In "AT SELECTION SCREEN" I throw an error message if certain criteria return no data. 
    After the error message is thrown, the button for choosing variants no longer appears to work.  I click it and the variant selection box doesn't come up.  It just changes the values that have been populated from red to black. 
    What is the code that remedies this?  If an error is thrown, it should allow you to select a variant still. 
    Thanks,
    Kevin

    "AT SELECTION SCREEN" is not an option here.  Let me clarify.
    In START-OF-SELECTION, I call another program with a SUBMIT statement.  That program uses a logical database.  So it makes no sense to move this to "AT SELECTION SCREEN".  Even when I did that, I still couldn't solve this problem. 
    If the SUBMIT statement returns no data (if sy-subrc = '4') then I need to go back to the initial screen.  I need to display some kind of message, of type I or E or S, I don't care. 
    It just needs to go back to the selection screen and VARIANTS need to WORK, and you need to be able to SAVE the variants.
    For some reason, if I get no data with the SUBMIT statement, I can display a message and get back to the selection screen but variants do not work.  I've tried EXIT, STOP, CALL SELECTION SCREEN 1000 (the only one in the program), END LIST-PROCESSING, etc.  NOTHING WORKS!

  • Need to bypass "Remove and check color cartridge" error message

    I have an old HP printer giving me the error message "Remove and check color cartridge." I remove it, it's good, I put it back, same message. I try leaving it out, I get an error message asking me to install a color ink cartridge.
    I DON'T EVEN WANT TO PRINT WITH THIS PRINTER. I have a new HP printer connected to my wireless network that I use for all my printing. I am using the old printer for its scanning capabilities in my crafting area. I am JUST wanting to scan old pictures to an external hard drive for storage, so that I don't have thousands of print photos sitting around in boxes and files.
    Please help.

    I had the very same problem with my HP Officejet 7410 so cleaned the ink cartridge and carriage contacts per the directions listed on this link: 
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
    After my first attempt at cleaning these contacts, i reinserted the cartridge and tried printing again but I got the same error message.  Next I removed both cartridges (color & black) from their slots and after pointing a flashlight at the carriage I discovered the bottom of the carriage was covered with ink, so....using over a dozen cotton swabs I cleaned the bottom of the carriage as best i could.  Also, thinking that perhaps the ink cartridge was not manufactured exactly to its proper size and shape, when i inserted the cartridges back into their slots I slightly pressed them in to be sure the contacts would touch. 
    I was happy to see that now the error message is gone and my printer is printing again....well, at least for now.

  • Help !!  I am trying to uninstall and then reinstall itunes but when I try to remove itunes it I get error message ~ the feature you are trying to use is on a network resource that is unavailable?????  Any help would be great:) !!

    Help !!  I'm trying to un install and then re-install itunes.  I get erroe message ~ the feature you are trying to use is on a network resource that is unavailable????  Any help would be great!   TXs!

    See if this previous discussion will help.  It is markd as solved:
    I am trying to uninstall itunes as it will not open error 7 (windows 126) so that I can reinstall but keep getting the message.. The feature you are trying to remove is on a network resource that is unavailable itunes.msi... Any suggestions anyone
    It was the one with the green checkmark on the right side of this page.

  • Home Button Unresponsive + Airplane Error Message

    Hi, i'm looking for a bit of help. This morning I woke up grabbed my iphone from the docking station and it had a message saying that...
    "This accessory is not made to work with the iphone" then asks if i want to switch to airplane mode. Even if i hit no, it comes back later even if its docked or undocked. On top of that, the home button is unresponsive at times, i have to press it about four or five times for it to work. I havent dropped the phone in a while, and its not damaged and I have the latest software. Ive tried turning it off and back on, and ive tried ressetting it.
    Any Suggestions?

    Make sure there is no lint or other foreign material in your iPhone's USB port. It may be a very small amount causing this problem.
    If powering your iPhone off and on, and a Reset does not resolve it, the next step is a Restore. Be sure to sync your iPhone with iTunes immediately before restoring to update your iPhone's backup if needed.
    If a Restore does not resolve it, and there is no lint or foreign material found in your iPhone's USB port, give AppleCare a call (800) 694-7466, or make an appointment at an Apple Store if there is one nearby.

  • Refresh button is throwing error Message in the UWL.

    Hi All,
    I have created  the Refresh button in the UWL Header Table.when i click on the Refresh button, it is throwing the below Error
    "Unable to perform the request. Try again and if the problem persists, inform your system administrator"
    The Code snippet I have  written  is like below.
    <Action name="refresh_custom" groupAction="refresh" handler="UIActionHandler" referenceBundle="refresh" returnToDetailViewAllowed="yes" launchInNewWindow="SHOW_HEADERLESS_PORTAL" defaultGroupAction="yes">
          <Properties>
           <Property name="display_order_priority" value="99"/>
           <!Property name="type" value="button"/>
           <Property name="onClick" value="onForceRefresh"/>
          </Properties>
        </Action>
    and at the required View i called the reference of this Refresh.
    <Action reference="refresh_custom"/>.
    It would be greathelp if anybody shares their views regarding the same.
    Raji.

    I am pretty sure that nothing can be done about this. A Lot of other websites/applications also have this same problem. You try playing with the browser cache settings so that the back button doesn't try and get the page from the cache. You could also try and experiment with the cache-control and expires HTTP headers, to see whether this has any effect.
    Other than this, I am unsure as to whether it can be resolved
    Sorry
    D

  • URGENT : On clicking back button of IE error message in the content area

    Hi all,
    On clicking of a link in my navigation area KM folders are displayed in the content area via a KM iview. On 1st level navigation in this iView and clicking the explorer back button there is no problem. But if we navigate to inner folders and click on back button I get a warning in the Content Area:
    " Warning: Page has Expired The page you requested was created using information you submitted in a form. This page is no longer available. As a security precaution, Internet Explorer does not automatically resubmit your information for you.
    To resubmit your information and view this Web page, click the Refresh button."
    This is not the case when I navigate through Bread Crumb.
    The isolation method for my iView is Embedded and for my Page is also Embedded.
    Please reply soon.
    Thanks and Regards,
    Sweta.

    I am pretty sure that nothing can be done about this. A Lot of other websites/applications also have this same problem. You try playing with the browser cache settings so that the back button doesn't try and get the page from the cache. You could also try and experiment with the cache-control and expires HTTP headers, to see whether this has any effect.
    Other than this, I am unsure as to whether it can be resolved
    Sorry
    D

  • Removal of the warnings and error messages

    Hi,
    I am using JAXB to read/write some objects. I wish to know how to disable(just prevent it from being displayed thats all) the warnings/errors that arise due to the non-compliance to the schema.
    Thanks in advance,
    Achyuth Krishna

    For validation errors and warnings detected while unmarshalling XML data into Java objects, to disable it use method Unmarhaller.setValidating(false)

  • I have an error message that won't go away and stops me from using any other buttons in the screen.

    I have an error message reading 'item over 1 byte. Connect to a wifi network or use iTunes on your computer to download 'tv show'.
    When I connect it to iTunes or use a wifi network nothing changes.  The warning remains in place no matter how many times I push 'ok'.  iTunes actually says the show is already fully downloaded.
    I can't use any other button or controls because the only thing responding is the 'ok' button on the error message.
    I've now given up and am just trying to exhaust the battery.  What a joke.  This device is only a week old.
    Anyone else with a suggestion on how to make the error message go away? I'm worried this will happen again.
    Thanks!

    Try this.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Removing policykit gives error message [SOLVED]

    This is actually more a heads up: hal has dropped the dependency on policykit, which will therefore become an orphan on most systems. Removing it gives me an error message:
    # pacman -R policykit
    checking dependencies...
    (1/1) removing policykit [#######################] 100%
    error: command failed to execute correctly
    This error can be ignored. It is caused by the following code in policykit.install:
    post_remove() {
    usr/sbin/userdel policykit &>/dev/null
    usr/sbin/groupdel policykit &>/dev/null
    By default, userdel will already remove the group policykit, since it is the primary group of user policykit. So then groupdel complains.

    My question is related to the policykit "world", so I'm borrowing the thread
    This move from HAL to stop using policykit and start using consolekit is going to break all the rules made in *fdi files on /etc/hal/fdi/policy/ ?
    (I haven't upgraded yet) If so, where should the synaptics, keyboard, etc configurations, I have in that form, go? 
    Thanks

  • I upgraded to version 5 and now cant open firefox due to error message about script

    When I try and open version 5 I get this message " A script on this page may be busy or may have stopped responding, you can stop the script now or you can continue to see if the script will complete"
    Error message
    Script: chrome://tavgp/content/libs/include.js:595. If I click the stop script button in the error message box firefox eventually opens, if I click the continue box it wont open. I have a fast computer with heaps of Ram and hard drive space running windows xp pro. I have uninstalled and reinstalled firefox, then rebooted even gone back to an earlier restore point but it still wont work. please please can someone help me as version 4 was perfect. really frustrating as I love firefox:-(

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    *http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    See also:
    *[[/questions/880050]]

  • FCP & VTR error messages

    I have been installing several FCP 5.1 on new MacPro Intel G5's since last December. And I have been getting reports from the editors who operate these systems that they are getting error reports from FCP about the VTR. We have tried many different approaches to solve the problem, but to no avail. Part of the problem is that it is intermittent. What we are using are brand new MacPro Intel G5's with with 8GB RAM. Besides the internal OS drive, there is another internal 500GB drive for FCP media. The MacPro is at 10.4.8. FCP is at version 5.1.4. We are using Blackmagics MultiBridge Pro as the video/audio interface. That is at version 5.9.2 which is current. This uses the Decklink machine control software which is also 5.9.2. We connect machine control via a 9 pin RS-422 cable. The video is connect via the SDI port on the MultiBridge and the SDI on the VTR. We are using the 8 bit uncompressed setting. The throughput on the hard drive is more than adequate. Audio is analog. The tapedecks are Panasonic DVC Pro. We are using the Panasonic RS-422 protocol setup in FCP Device Control Setup. What the editors are reporting is that while digitizing they will get this error message on the screen and FCP stops digitizing. The first error message reads as follows "Tape trouble. Check VTR. Do not attempt to eject tape or use transport without checking VTR first." They will then click the OK button and this error message will appear twice again. After the third time they get this message. "Capture Now has reached the end of the tape. All existing footage between the point where you started the capture and the end of the tape was captured successfully" They click on OK and the error message disappears and that is it. The VTR is still running and is not at the end of tape. The editors rewind the tape to where the digitizing was halted and then begin again to digitize. The error message may or may not appear again. There is no break in timecode. FCP does not crash, there is nothing listed in any of the log files. Has anyone else run across this? Anyone have any ideas for a solution? We've tried just about everything we can think of. Thanks in advance for the help.

    I have a problem tape that gives me the message "Capture Now has reached the end of the tape, etc." every 18 seconds or so after which the VTR stops and happily starts to rewind. The tape was recorded in DVCAM and I had no problem capturing it some time back in November on a different machine. Now the same client wants me to capture it again and the tape simply does not work.
    As I have saved all the previously captured material on the original drive in the office and also made a backup tape on a miniDV cassette (again recorded in DVCAM), I thought that the backup tape would work but no such luck! The symptoms are the same - 17-18 seconds of playback, then "end of tape" and rewind. This behavior does not change when I simply play the tape back or try to capture to FCP, iMovie or iDive. Setting capture to Non-controllable device also did not help because it was the VTR that could not handle the tape, not FCP.
    This is very strange - the first capture in November gave me no trouble. Then I used a new Sony HDR-25 or some such deck, at home I have a new DSR11; the tape is the same. Going in 18-second capture sessions, I have downloaded all the material that the client needs but it was very embarrassing sitting near the guy and not being able to reign in the machinery. I searched this forum but found no workaround. Can anyone point to a place where things like this get explained, advice given, empathy offered? Thank you.
    PowerMac G5 DP   Mac OS X (10.4.8)   Sony DSR-11, FCP 5.1.2

Maybe you are looking for