Remove mailbox only from cuc when user is cucm imported

Hi,
Can you remove the mailbox from CUC when the user was imported from CUCM?
or alternatively,
Can you "migrate/change" users from being cucm imported users to just plain normal created CUC users?
We need the ability to remove the users from CUC only, but that currently also removes the user from CUCM!
cheers
Sascha
CUC[M] 8.5

Are you looking at just removing the Imported from CUCM tag? Or converting CUCM imported users to Unity Connection users?
You can't remove the tag.
To convert the users, I'm not sure about the API but you can do it from Unity Connection itself,
Option 1:
Use the BAT tool. Export Users with mailbox. Update the CSV file. Look for the ccmid column. You'll find a string value. Replace the string value with %null%. Save and update users with mailbox using BAT.
Option 2:
Run this query on the CLI. (Replace Anirudh with the alias of the user you want to convert),
run cuc dbquery unitydirdb update tbl_user set ccmid =' ' where objectid= (select objectid from vw_user where alias='Anirudh')
Note: This converts CUCM imported users to Standalone Unity Connection users. You cannot sync the users with CUCM anymore.
HTH,
Anirudh

Similar Messages

Removing mailbox server from Exchange 2010 DAG - Node not fully cleaned up

Hi,
We are in the process of decommissioning some old Exchange 2010 servers. I have just attempted to remove one of our mailbox servers and have received a number of errors, related to its removal from the DAG.
I have already removed the Public Folder replicas and all mailbox database copies. I then tried to evict the server from the DAG and received the following warning:
I then ran the command that was recommended, from another server and in an administrative command prompt:
I have looked in this log on both the server I ran the command on, a CAS server, and the mailbox server itself and can see no evidence of this error 2 that is listed here.
If I run the Powershell command to look at the DAG I cannot see it there any more. I am assuming that this error message might only be an issue if I was planning on re-using this server somewhere else in Exchange or perhaps adding this server to another
DAG. But I just want to decommission it.
Can anyone put my mind at rest as to whether this is a genuine concern or not. If not my next step is to uninstall Exchange 2010 from this server and turn it off.

Hi Belinda,
I get the following:
[PS] C:\Windows\system32>Get-DatabaseAvailabilityGroup
Name Member Servers
Operational Servers
DAG01 {WSR-EX-01, WSR-EX-101, WSR21}
It doesn't look like that server is part of the DAG any more as far as I can see. I just can't explain that error message reported from the cluster command. As far as I can see the server is isolated. I already removed its database copies as a pre-requisite
before removing it from the DAG as per this guide:
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_27039933.html
I found a nice little script that gave reports on your Public Folder configuration and it highlighted that some of our folders were not being replicated properly across our mailbox servers. This helped me in removing these services from the server.
It is currently doing nothing at this time as far as Exchange Services are concerned.

How do remove a song from nano when thsong was removd from the computer list

How can I remove a song from the nano when the song wasremoved from the purchase list but didn't come off the nano

It means no such thing. Your selection of songs to sync remains in iTunes regardless of what is currently on the device. After you delete the music from your device, connect it to iTunes, select it from devices:
Then select the Music tab, uncheck the few songs you no longer want on the device and resync.

Why can I not remove extra spaces from Mail when composing?

I am using Mail Version 8.1 and I cannot find a way to remove extra spaces from between my lines while composing. Every Enter makes the cursor go down two lines and there is no way to type in the space in between. There seems to be now way to see the html or any tags that can be causing this, and I cannot seem to find any setting to change the line spacing either. Does anyone know where to find any of these options so I can simply make the text single space?

Open a message-editing window. Under the Edit menu, deselect all the options in the Spelling and Substitutions sub-menus. Test.

HT2731 I ca't remove the application from screen when I go to the app store on my 5c

I can't remove the application from the app store screen so i signed up online but cant go to the store because of the application being on screen

jprice2796 wrote:
I can't remove the application from the app store screen ...
Which Application..?

How can I remove Snow leopard from my Mac, it crash all important programs

Please tell me how I can remove Snow Leopard from my machine & revert back to Leopard 10.5.8
Since I loaded Snow leopard, Adobe Illustrator, Photoshop, Quark & Mail all quit over & over again. I never had ANY of these issues before loading snow leopard. I rely daily on the programs I listed. I am not saying once in a while, but constantly; opening the programs, exporting, placing graphics, emailing, you name it, it quits the program I am in. I keep sending apple the crash reports, but I am afraid I have reached my end. (Apple must have a folder fu;l of crashes with my email address in it by now.)
To maintain my sanity PLEASE tell me there is a way to do this without risking loosing any of my data.
I do have time machine hooked up.
Please be a life saver (sanity saver) and tell me how to get Snow Leopard off my machine!!!!!

First, Welcome to the Discussions,
Second, there is no way to successfully degrade an OS to a previous version. You would have to install anew a previous OS, thereby erasing all your data. Then you would take that version up as far as you want to go.
Of course if you've been using Time Machine you can recover to the prior system and retain your files using that.
Best of all would be to have a firewire external drive and use an app like this to make a clone on. No worries then if one wants to go back before any major changes very precisely.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
Good luck.
http://support.apple.com/kb/HT1427
http://docs.info.apple.com/article.html?path=Mac/10.5/en/15638.html
Message was edited by: Samsara

FaxSTF fails to send - but only from my main user account!

I bought FaxSTF in version 6 for OS 9, and version 10.5.3 for OS X. My woes with it in OS X are not so much of the kind that I've read while searching this area for answers; they are rather peculiar, and I suspect FaxSTF might not even be at fault (though I can't be sure). For what it's worth, let me also state up front that under OS 9 it worked almost rock-solidly. It was very, very versatile and amazingly reliable. Not so much in OS X; versatility and reliability are out the window. I'll explain:
In my main user account ('alex', admin account) no matter which application I try to fax from, when I click on the blue throbbing 'Fax' button, it stops throbbing and becomes grey and nothing else happens. I can only dismiss the print dialog by clicking on 'Cancel'. There is nothing I have tried which can change this behavior.
Things are better, though, in secondary, standard or admin user accounts on the same machines. From them, I can fax things with no problem whatsoever.
This is the second powerbook on which this is happening: the other one is my TiBook 550MHz running Tiger, also. What it's meant basically is that when I need to send a fax, I have to:
•save my document in a directory accessible by my other, secondary, accounts, then
•use Fast User Switching (thank goodness for that) and through my other account ...
•open the document (usually a PDF by now, so I only have to use Preview which loads fast enough) and
•enter the fax number manually (since my Address Book database is not accessible by the secondary account) and click on Fax.
Of course, if I need to keep track of sent faxes, I then have the additional step of exporting the fax into Fax format from FaxSTF from the secondary account, then over at my main account go into FaxSTF and import it for my records.
Not so practical...
Thankfully, FaxSTF is fine when receiving faxes while logged in my main account.
I was hoping that some useful hints/help will be available through the Discussion Area, as opposed to SmithMicro customer support; they take up to months to reply to an incident posted on their web-driven database, and when they do, their responses are almost meaningless most of the time, assuring me that my problem is not really happening, and reminding me of the correct procedure for doing things (it's the very procedure that doesn't work with me, but often times they haven't even read/understood my incident post in the first place. Very polite people, though; I'll give them that!)
As always, thanks in advance, people.

I would look into if the ports the smtp is using are open at all
if they are closed over 3g then it should work over wifi unles your wifi router block them too
and of cause if you set the wrong encryption or some of the other smtp settings then that too would
explain it

How do I remove "read-only" from images transferred from a PC so that I can add keywords?

I switched to a Mac from a PC a year ago and have been using PSE 9 + Organizer with no problems. I transferred all my images from the PC at that time. Now, I want to transition to using Bridge and have been assigning keywords to the newer photos added after I started using the Mac. I am unable to assign keywords to the earlier photos because Bridge says they are read-only. I checked the Apple Get Info on the folders and they are read and write. Any ideas?

the Sharing and Permissions box on the bottom shows I have "custom" and "read & write" access for both pre- and post 9/2010 folders. All others (nobody, staff, everyone) have read only. Of course there is actually only me.
Anne,
It seems related to your OSX. I think you have created a new user account without adding a name (hence Nobody) but I'm a bit guessing in this department.
The default user account folders like pictures and movies have the ability to set to 'custom'. With you as only user and administrator there should preferably only be one user account visible. By default a newly created folder should show 3 options for sharing and permission. User (your name of the user account) Read and Write
Staff: read only
Everyone: Read only.
I have tried deleting "nobody" and "staff" and changing Annie to read and write - all kinds of combinations.
You can only edit users accounts in the system preferences / Accounts. In here is the option for you as administrator to delete and create users accounts. Here is where it is getting a bit difficult because we can't see your set up for the OSX. But if you have to change 'Annie' to read and write and assuming your user account name is Annie it should already have been on read and write. If you are logged in as 'nobody' this should have shown read and write to have access to change metadata.
So you first have to study a bit about user accounts on a Mac and see if you have a correct install. It is not very difficult and you will gain profit from this knowledge.
try the Apple.com support site, for a start here is a link to an article from the Apple Knowledge Base (kb) article about user accounts:
http://support.apple.com/kb/HT3309
Some images have been moved from the original folders so that could be a problem.
Basically you should not have any problem with moving files to whatever folder you want or create on your user account (or to external Disk etc.)
For a start you could create a new main folder in your user account Home folder and call this test or whatever you like except an already existing name. Of course also check if you have read and write permissions for it...
Open Bridge, use the folder panel to select a folder with the problem files. Now scroll through the folder panel and click on the triangle in front of your home folder. This will open the list with nested folders while Bridge content window still keeps its focus on the problem files you first selected. Select a bunch of the problem files from the content panel and use drag and drop to move the files to the newly created folder. Just move the mouse on the folder name and release the files.
If you hold the option (alt) key while dragging there will appear a + - sign and the files are copied to their new location, just use what you think is best for you.
After this action has finished click with your mouse on the newly created folder name in the folder panel and now the files should show in the content panel (if correct also already cached). Check if you are able to change the metadata now.
Most have tags from current and previous Photoshop Elements versions.
That should not be a problem, some info will be readable by Bridge, others not. Some Bridge version even had their own Bridge versions.

How do I remove the "Sent from Blackberry" when sending e-mails?

I send e-mails from my Blackberry all the time, but I do not want it to say "sent from blackberry" on the e-mails. How do I fix this?

michelebow wrote:
Is there any way to remove this line if I am NOT using an Enterprise server?
Hello,
the answer of d_fisher concerns only those who don't use an Enterprise server.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Stop string from ending when user types quotes...

i have a textarea on my form, and it submits to a servlet.
problem is, when a user types in a double quote, the info gets cut off.
I used single quotes in the servlet to fix this, but then if the user enters single quotes, the info is cut off.
does anyone know how i can make sure that if a user enters either single or double quotes the info they type does not get cut-off?
Thanks!!!

His/Her question is very hard to understand, i think.
There are many ways to produce a fault like this.
The most common misstake is to process the Information (textarea-content)
to a Service which can't handle qoutes in the Query-String (SQL-Servers), because
they're are using it to get the beginning and the end.
That would "cut off" Information.
In this case you have to replace all the qoutes with something the Service doesn't identifys as an Tag for itself. (String = String.replaceAll("\"",""");)
To show the "real" Information, you just have to "switch-back" your String at the Time when your retrive it. (String = String.replaceAll("&qout;","\"");)
4 example ...
I hope i got it. ;-)
(i know, my english is worst)

How to restore from iCloud when user can't remember ID or password?

A family member had to replace a dead iPhone, has a nice new iPhone, and needs to restore her stored info from the iCloud to her new phone. The problem is she does not remember either her user ID or her password, to restore her data. She does not have an iTunes account, she uses mine.
Is it possible my ID & password are used on this iCloud account? I know we have separate storage spaces, but I haven't figured out how to get into iCloud to check on what is there.

You can restore iCloud data if you don't know the ID and password for the account it is stored in. If you think she may have used yours, go to icloud.com from your computer, sign in with your ID and password and see if it's her data in the account.
She can also try to find her ID as explained here: http://support.apple.com/kb/HT5625. Then she can reset the password as explained here: http://support.apple.com/kb/PH2617.

How to disable Internet from running when users first boots into Windows 8.1 Pro

Recently added Windows 8 into our environment, everything works fine except the IE 11 always pops up at initial logging. Is there a way to disable this w/ Group Policy?
Thanks in advance.
Roget Luo

Hi,
Did you mean that once users first log on Windows 8.1 and IE 11 pops up? Did this issue happened after logging off then logging in and shutting down the PC then restarting to login?
What’s the detailed information about the pop-up? The screenshot would be more helpful for us to determine the issue.
We can check if there is any logon script or task schedule configured in your environment.
For further help you, please provide more information about how you deploy Windows 8.1.
Meanwhile, please help to collect the boot trace for further research.
How to collect a good boot trace on Windows 7
http://blogs.technet.com/b/jeff_stokes/archive/2012/09/17/how-to-collect-a-good-boot-trace-on-windows-7.aspx
Once down, please upload the .etl file into SkyDrive or Similar ones and share the public link here for our research.
Look forward to your response.
Kate Li
TechNet Community Support

How to get index of the item from table when user double click on an item

Can anyone tell me how to get the corresponding index of a table in which
elements are listed as array of strings? I am looking for the index of the
item being double-clicked on?
Thank you in advance
Cheers,
NQ.

Hi NQ,
Although the question is not thouroughly clear, I can give a few suggestions. You can use the property node for table to refer to any particular row or column of the table. The correpsonding elements in the property node will be "SelStart", "SelSize" etc. Just as a side thought, the index of a table starts with (0,0).
I am attaching a test file. Please see if it helps you in figuring out what exactly you want. This example VI is just to help you try different options under property node (if you havent already tried)to get what you want.
Regards,
Sastry Vadlamani
Applications Engineer
National Instruments
Attachments:
test.vi ‏27 KB

How to delete trash photos from iphoto when its saying let import complete and the importing is done already

i am not able to delete trash pics from iphoto even when the importing of pics is already done, pls help me asap

SOrry - no mind readers here
What version of iPhoto? Of the OS? what is happening? Why can't you delete "trash pics" (are yu having trouble deleting ptures you do not want or trouble emptying the iPhoto trash)?
Remember we can not see you and only know hat you tell us so please give dtails
LN

How can I stop authenticated users from getting other user's information?

We recently discovered that it is possible for authenticated users, via KMu2019s details view, to view details about the other users that have access to the same resource as you. Our portal (7.0 sp15) is used for an external facing web site. We have secured it against anonymous users but the problem still remains for authenticated users. Here is an example:
The KM folder documents\Public Documents has been assigned read permissions for the group Everyone. An authenticated user can open the URL https://<host>/irj/go/km/navigation/documents/Public%20Documents and a list of folders are shown. The user can then select the Details from the menu for one of the folders and the Details iview is displayed. They then select the menu item Settings > Permissions and the users/groups/roles assigned to this folder are shown. The user can then select a user and view that users name and email address or the user could select a group and view for each member of the group the user id, name, and email address which could then be used to help attack the site.
So I thought it would be easy enough to disable the details view for all users but content managers or administrators but I seem to running into difficulty.
I tried disabling the Details KM command with limited success. Even with it disabled, if you know the URL for the details component you can still access it. So it seems the better option is to take away access to the details component. It seems that the users are getting access to the Details iView from the standard eu_role. If I remove the iView from this role then all user have no access to the Details in KM. I tried to add the iView to another role that content managers would have but when logged in with a user that had that other role I still was not able to access the Details iView.
This SAP Help document [http://help.sap.com/saphelp_nw70/helpdata/en/47/f0f7415e639c39e10000000a155106/frameset.htm |http://help.sap.com/saphelp_nw70/helpdata/en/47/f0f7415e639c39e10000000a155106/frameset.htm ]discusses the eu_role(Standard User role) and it states that
By default, the Everyone group is assigned to the Standard User role. If you choose to use the other every user roles instead, you need to remove these assignments from the Standard User role and apply them to the Every User Core and Control Center User roles.
But, when I look at what groups the role is assigned to or what roles are assigned to the Everyone group they donu2019t appear to be linked contrary to what the documentation says. So, what Iu2019m thinking here is that I can create a copy of this role and remove the Details iView from the original and then assign the copy to the content managers and administrators. Doing this causes all users to lose access, even the content managers.
I thought Iu2019d give the Security Zones a try to see if this could help me but when I take away rights from here it still allows access.
Iu2019m stumped. Iu2019m sure there is some key piece that eludes me. What can I do to allow users read only access to some KM folders and files while preventing them from viewing the permission/user details?

The only 3d party apps are Hazel...
And that's your problem!
From the Hazel site's description:
Hazel watches whatever folders you tell it to, automatically organizing your files according to the rules you create.
Hazel, is a prefPane so you must have some rule (or it supplied the rule as a default) to put pictures (jpg's) from your Desktop (folder) into your Pictures folder.
Open your System Preferences and Hazel in there and either turn off Hazel or change or delete the appropriate rule covering this situation.

Remove mailbox only from cuc when user is cucm imported

Similar Messages

Maybe you are looking for