Remove operator logo from 6270

Does anyone know how to remove the operator logo from a 6270? I've tried sending a blank logo to the phone using Logomanager but it got a "Saving failed" message twice. I've also tried downloading blank logos from a couple of wap sites - they claimed to have saved but I still can't turn operator logo off

See if you turn off the operator logo under your display setting of Active Standby Mode.

Similar Messages

Does anyone know which software can remove a logo from a video as well as subtitle in it. Thanks

Does anyone know which software can remove a logo from a video as well as subtitle in it. Thanks

Watermarking like this cannot be easily removed (which is the entire point of including a watermark). You would probably have to go through the video frame by frame, editing out the watermark and subtitles by hand, and then it would take a lot of work to try and reconstruct the background to not just leave a blank spot. It's not worth the effort unless you wanted to use such a video professionally, and then you would need a licence after obtaining of which you probably could obtain the original footage without the watermark.
If you really want to explore this, though, see:
http://www.fxguide.com/featured/the_art_of_wire_removal/
Regards.

Remove a logo from a video clip with content aware fill?

I know you can remove logo in photos using content aware fill, but you can't do it to a video clip. You can only do it to a frame, but you can't apply it to the entire video. I know photoshop is not a video editing software, but having this sort of feature makes sense for photoshop users especially with content aware fill.

I'm a career software architect engineer of 35 years, and I have to side with Howard on this one.
Like Howard, I feel you're thinking about this way too simplistically. Trying to work out what best to fill a part of an image with in 3 dimensions (x, y, and time) and have it look believable almost boggles the mind, especially thinking of a general case (your logo example is far to simplistic in itself). The task is far from a simple looping repeat of what is being done 2 dimensionally on a still frame. Frankly, it's more likely related to what's done with CGI, where scenes are modeled in 3D (4D actually) so certain elements can be replaced believably.
Think about it... If CAF is presently replacing part of an image with something it finds through some heuristics in another part of the image, and the stuff in that part of each frame is changing - and it would, because this is video, not still imagery - then it will select differently every time. What makes you think it would select something that even resembles what it selected for another frame? What you'd end up with is a frame by frame mishmash that would just make the outline of the selection obvious.
Regarding CAF applied to individual frames, then your finding the result isn't coming out as expected in all the frames of the video (e.g., when you're testing this concept) may indicate a problem with the way you're using the tool, or possibly even a bug. You might want to describe step by step what you're doing and show the result you're [not] getting.
-Noel

Can I remove the logos from the bookmark toolbar?

I really hate the inclusion of the logos on the bookmark toolbar. Can I customize it to remove them? It makes for more clutter and I really don't need reminders of logos I see a million times already;-]

AS2 also allowed you to add custom request headers, but not
modify certain headers (modifying would include 'removing'). And
for POST requests only.
This appears consistent:
as2
http://livedocs.adobe.com/flash/9.0/main/00001778.html#wp304907
as3
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/net/URLRequestHeader.html
Flash uses the browser connection when it runs in the
browser, so I don't really know but I think it may also be
dependent on the browser... I presume that's part of the reason,
the other part is possibly related to security, I guess. Also, I
don't understand what the harm of leaving it is. Out of curiosity,
under what circumstances would it be essential to remove the
Referer header from flash requests? I've only ever added custom
headers to my flash POST requests sometimes, for various
reasons.

Removing apple logo from IDVD Menus?

Is there any way to do this? I want to make a nice presentation of my movie and I don't wont no ******* Apple Logo on top of my graphic desing? How can I get rid of it? Is there any way you can create a simple menu from scratch with no templates?
Second: The movies I burn on IDVD only play in one out of three DVD players I try. I'm plannning on making lots of copies of my movie proyect to show it around but I won't do it unless I know all the peopla are gonna be able to watch them. Any sugestions? If I make a master copy on IDVD and then I go to a duplication center to make the copies, will I have the same problem with all the copies and they'll just play on "some" DVD players?
Thanks

You can remove the watermark by going to the preferences menu and unticking the watermark box......as to the question of playback use single layer -R disks where possible and also try different brands to see what works best. I am about to find out the replication answer myself soon so will let the forum know how I get on!!
PS I wish DVD studio Pro read from iDVD!!

How to remove CPI Logo from Guest Users Printed Credentials?

Hi all,
I recently migrated from NCS 1.1.2.12 to PI 2.1 for one of my customers.
My concern is related to the printed credentials for Guest Users on a WLAN which uses Web Authentication, this credentials are generated by Lobby Ambassador accounts.
When I print the credentials for Guest Users, the Cisco Prime Logo is included at the top of the printed paper, which is something that did not happen in NCS prior to the migration.
Do you guys know if there is a way to remove that Cisco Prime logo so this is not printed along with the credentials?
Thank you in advance.
Calvillo

Hi Nour,
Sorry, it is not a concern... I think I should've used the word "doubt" instead.
I also thought that removing the PI logo was not possible but want to make sure before confirming this to the customer. He just doesn't want the logo to appear on the paper.
Thanks!
Calvillo

How do i remove the vodaphone logo from 6230i ?

does anyone know how i go about removing the vodaphone operator logo from my 6230i?

I bought an application from www.logomanger.co.uk called MobiMB that does that and can restore the default startup and shutdown animations.

RH11: How to remove the logo

The Standard screen layout template has a logo in the upper right corner.
I know how to change logo.png, but how do I remove the logo from the header entirely?
Thank you!

I have moved this thread to the HTML5 Layouts forum.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Need advice cs4 removing unwanted logos!!!!Please

I'm making a 30 sec commercial andneed to remove logos and trademarks ...ie poeples shirt logos and trademarks on equipment. Tried using the "write on " preset in cs4 with some success, as long as the item to remove is not in motion, it could be hidden. Unfortunately I have too many clips that need correction and it didn't work well for many of the clips.
I imported the clips to photoshop as an animation and corrected many logos with the heal function (frame by frame) .The result was at best 40% of what I would call perfect. When I exported the file to view it in premere and work the audio(photoshop does not do audio) the rendered file was choppy and of poor quality.Tried exporting in different formats and file types but got poor results there as well.
I would love some advice on how to correct this in premere cs4. What am I missing? Is there a tried and true method to remove a logo from video without using the blur option or the "write on " function? HELP!!!!! PLEASE!!!!!

Bill
Thanks for the reply...what would be your first line of attack on
the logos? Perhaps I'm looking at the approach wrong. The footage is
hd 30 fps from my Sony z7u as an mt2 file. I have put some crossfades
and other effects into the timeline....I should probably remove them
before I try and correct it as this just adds another diminution of
confusion. Perhaps after effects is a better medium to work in with
matte's? Any help on this would be great as the hours spent so far
are staggering for a very mediocre result. Thanks for the warm
welcome! Rick

How to remove the Char.from one Operating Concern

Hi Guys,
How to remove the Char. from one Operating Concern.
I have created one Char. (WWDOC) and moved to Operating Concern (OOCC). Operating Concern is in red status.
Now, i want to remove that new assigned Char. (WWDOC)from the operating concern (OOCC). I did't find any option in the menu also.
Appreciate your help.....
T&R
VVR

Hi Sasi,
Iam not able to push back that char. from my operating concern. In help it is given you have to delete the data contents in the table before pushing back. Please let me know if any other option available.
Thanks for your reply.
VVR

Help to remove opera web browser from OSX

Hi
Trying to remove opera from my mac (osx 10.5.5)
I have deleted the application
I have deleted the preferences in the libary
All as per instructions on opera web site.
However
When I still see the option
"open file with"
opera 9.1
opera 9.2
If i do that opera opens !
If i open the activity monitor with it running I look at files, there is no path for the application. (not shown)
But its not on my system, I have done complete search for it its not there but it is.
I dont want it, I want it gone.
thanks

I share the same frustration as Robin
Not a major issue, but I would also like to remove Opera as I never use it. However, like Robin, I have not managed to find where it is stored, even after searching high and low.
I agree that is seems to follow Adobe Photoshop (or Elements), but where on earth have they hid it??
And if anyone has a solution - does it "mess" with Photoshop in any way if removed?
All the best,
Espen

In iphoto '11, how do I remove the apple logo from the back of the book?

In iphoto '11, how do I remove the apple logo from the back of the book?

In the All Pages window of the book click on the Options button at the bottom. In the drawer that appears click on the Settings button.
Then in the window that comes up uncheck the checkbox that says Include Apple Logo at end of book.
Happy Holidays

Removing Adobe's Hidden Opera Install from Finder Menus

Is there a way to remove application's from the Finder's "Open With..." menus without removing the application?
Adobe (stupidly) installs multiple copies of Opera (hidden in packages) as a part of several of its applications and supporting components, so if once you've installed a couple Adobe apps, you've got several Opera's installed, each of which shows up in the Finder's "Open With..." menu.

Maybe I wasn't clear above: I use the Adobe applications and components I mention above and don't want to delete them. None of them work without Opera, so I can't delete that either.
The problem arises because, instead of putting Opera in the Applications folder where I could update and manage it normally (or instead of shipping some Opera components that don't act like an app), Adobe sticks a full-fledged Opera app in each of several different packages. So if you have Photoshop installed, for example, there are two supporting apps that get installed with it, each of which has a (different and outdated) version of Opera installed as an integral component. If these copies of Opera never showed up anywhere, it would just be bloat; but because they're apps, they show up as distinct entries in the Finder menus. So, if I also have a current version of Opera in Applications, just installing Photoshop gets me three different Operas in the "Open With..." menu.

I want to remove/change my company logo from payment advice. How can we do?

I want to remove/change my company logo from payment advice. How can we do that? Whar are the steps or procedure?
Thanks.

Go to the "File" menu, then "Print." The window that appears will have three drop-down menus at the top.
The first is labeled "Printer",
The second is "Presets".
The third is unlabeled but has "Copies & Pages" selected by default.
Click on that third menu and select "Firefox" near the bottom of the list.

Removing the "Adobe Captivate" logo from the playbar

Hi,
I'm fairly new to the software, so sorry if this isn't possible - but I have a PowerPoint that I published through Captivate and so far works great, but the client would like to remove the captivate logo from the toolbar. I didn't see any options for this in the publish settings - is there any way of removing it?
Thanks,
Jesse

Hi again
And you might find the following link a bit helpful too.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Remove operator logo from 6270

Similar Messages

Maybe you are looking for