Remove T Code for each ROLE for user

Hi Experts
Can anyone tell me how to remove the T code for each role which was define individually for users Eg
CR01 has been assign to 50 users, the difficulty is I have to go to each role then search for CR01 t code then delete and again generate the Authorization
In this way there are so many t codes which I have to go one by one to delete it.
Any help to remove the t-code for each role through any way.
regards
Piroz

try the Security forum at Security
they might have trick (such as CATT scripts).
doing this via SQL commands is dangerous. avoid this solution if you are not 100% sure of its impact.

Similar Messages

How to assign roles for each kind of users

Hello,
i am creating users for each kind of users, say abap developer or FI/MM/SD function users, in IDES ECC 6. it doesnt make me any sense how to assign which roles to which user( there are more than 2000 sap standard roles). can anyone give me some guideline how to create each kind of users.
any response will be awarded!
Thanks a lot!
Samson

I don't understand your question....
When sap is implemented usually part of the project is creating roles based on a blueprint designed to adjust to your company needs...
Basically Standard roles are there to be used as templates for your own roles.
Users as "dialog users" do not have classification... the special access attributes are given by the roles assigned to it based on the project plan desing pre-installation.
Hope that help
Juan

How to have separate template for each role in OIM

Hi,
We have multiple roles on a multiple AS400 boxes. In OIM we need a separate template for each role that has to be popped up during provisioning. How do we achieve this in OIM?
Pls help me with the solution.
Edited by: user8963056 on May 23, 2010 7:47 PM
Edited by: user8963056 on May 24, 2010 9:47 AM

Thanks for the reply
for the second question; we need on the basis of role these forrms will have different informations.
the AS/400 guys wants the below steps to be done on OIM side
They want to make sure below plan works with OIM plan.
1.Per System, create templates per role.
2.Update the AS400 User Request form to include a section for each system. Add templates for each role to each system’s section.
3.Provide ITSA with a menu option to create profiles by selecting the template they wish to copy.
4.Create backend programs to automate additional 400 tasks required per role.
a.Create directory entry
b.Add to Privilege Manager
c.Add to Menu System
d.Add to third party software
e.Other as required.
If we automate the above on the 400, in OIM , we would need to create the same templates.

I have created a newsletter in indesign cs4 how can I set zooms for each article for the user

I have created a e-newsletter in Indesign. I have successfuly saved it as a SWF then as a PDF from acrobat.
The problem is that when the user zooms in the resolution is not good.
How can I let the user zoom in to read each article. Would I create buttons with zoom settings for each article. If this is the case do I do it in Indesign or Flash and can I still save it as a PDF file and it will keep the interactivity?
I would greatly appreciate any help with this issue. It is driving me mad trying to get the information I need.
Thank you

Hi Bob
Dont know what you mean by deleting my signature in the forum. Sorry its my
first time using a forum.
So just to confirm if I want a user to zoom in on an article I can't do it
in Indesign or Flash.
cheers
PAMELA
                                                                                BobLevine
             <[email protected]
             >                                                          To
                                       pamela hettrick
             17/08/2010 14:09          <[email protected]>
                                                                        cc
Please respond to                                     Subject
             clearspace-143433         I have created a
             1873-767197-2-305         newsletter in indesign cs4 how can
             [email protected].         I set zooms for each article for
                 adobe.com             the user
You don't. There are third party solutions available for that. Sorry but I
don't have any links handy right now.
And please delete your signature...it's making a mess of the forum display
of your posts.
Bob

Is there any way to use a For Each Loop for each property of an User Defined Type?

Is there any way to use a For Each Loop for each property of an User Defined Type? That would be very handy!
Jorge Barbi Martins ([email protected])

Alas, no, not in VBA.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Opening stock of a material for each day for a month

Hi ,
Is it possible to get a opening stock of a material for each day for a month . For Example for the month of Feb From 01/02/2014 to 28/02/2014 i want to see the opening stock for each day .
Thanks .
Message was edited by: Jürgen L

If you give 01.02.2014 to 28.02.2014 in MB5B report, then you will got the opening stock for 01.02.2014 and closing stock for 28.02.2014...
the MB5B report designed like that
It will give you the opening stock for from date and closing stock for end date...
If you want to see the opening stock per each day, then you have to give the date each date in MB5B report...
Like as for opening for 02.02.2014, you have to enter the from date as 02.02.2014..
You can make your own report from copy the existing program RM07MLBD and you can add you additional code...
Make the program output will be for each day...

Remove transaction codes from multiple roles at a time

Hello,
how to remove transaction codes from multiple roles at at time?
Thank you in Advance.

Hi Vanita,
Why do you want to remove a t-code from all the roles. Are you no longer going to use the t-code. If this is the case then you can lock the transaction code in T-code SM01 so that no one can use it. But this would effect other users as well, it should only be locked if no one should use the particular T-code.
Another alternative is to write a program to remove the particular T-Code from the table AGR_TCODES where the relation ship between the role and t-code is stored.
Thanks.

For Each Loop for XML Task

Hello Everyone,
Please assist with a step by step guide on how to setup a For Each Loop for XML Task
I'm trying to convert XML to XSLT
I have tried more than 10 times and i just do not know what i am doing wrong - no error, my package just runs for a few seconds but nothing happens
Thanks in advance
Dee

I managed to get my XML to XSLT to work but now when i run my package to import the data into SQL table,
it stops after a few records, i get the following error:
[XML Source [1]] Error: The component "XML Source" (1) was unable to process the XML data. The element "Errors" cannot contain a child element. Content model is text only.
Please assist
Check this:
http://social.msdn.microsoft.com/Forums/en-US/80726e0c-9e85-43ca-87bc-7cf90fd7fb31/xml-source-data-flow-throws-cannot-contain-a-child-element-content-model-is-text-only-error?forum=sqlintegrationservices
Chaos isn’t a pit. Chaos is a ladder. Many who try to climb it fail and never get to try again. The fall breaks them. And some are given a chance to climb, but they refuse. They cling to the realm, or the gods, or love. Illusions. Only the ladder is real.
The climb is all there is.

"... y ou will be charged for each recipient for each message sent."

I received the system message today from Verizon: "Starting on October 14th, 2011 when sending a picture or video message, you will be charged for each reicpient for each message sent." I have $10 / month text plan that permits me 250 text messages.
I assume this system message means that, if I send ONE picture message to TWO recipients, e.g., then my pool of remaining text messages will be deducted by TWO.
I assume that the system message does not mean that, if I send ONE picture message to TWO recipients, e.g., then I will be charged, ABOVE AND BEYOND $10, for both messages, EVEN IF I HAVE TWO OR MORE MESSAGE LEFT IN MY POOL.
Are my two assumptions correct?

harbin96 wrote:
I have the same phone and received the same text today right after I added money to my account. I'm hoping your are right because I'm not paying extra just to send pics and videos! I wonder if this only applies to plans w/o the texting bundle. But as soon as the Unleashed plan comes out on Thursday, I'm gonna get a new phone and get that plan!!
Unleashed is a prepaid plan and yes it does have unlimited texting, Internet (Note I did not say data).
The issue, you are limited to particular phones. Feature phones only.

1 computer, 3 Mac OS user accounts, iTunes account for each Mac OS user, authorization problems

We have 4 computers for 3 people in our household: 1 iMac (recently purchased), 1 MacBook Pro, and 2 MacBooks. We were previously running off of just the MacBooks (1 for each person), but we decided to buy the iMac and use it as a hub for all of our pictures, music, movies, etc. We were sold on this idea after learning about the "Automatic Downloads" feature, where all content would 'just sync'. We each have a separate Mac OS user account on the iMac, with our own separate content libraries. We each have a separate iTunes/AppStore account. It seems like a good idea until...
When I tried to turn on Automatic Downloads in iTunes on my iMac, I got this message: "You can auto-download purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 87 days". I tried to turn on Automatic Downloads on my MacBook Pro, when I got this message: "You can auto-download purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 90 days". I did not necessarily want to download the apps/music/books to this computer anyways, as the reason we bought the iMac was to serve as a hub for all of this content, but it was still frustrating to see that message.
I have tried everything suggested on the authorization troubleshooting pages and forums (e.g., authorizing, de-authorizing and de-athourizing all, and reauthorizing), but I have not had any success. I have contacted Apple several times, but I get tips on how to ensure that I have the most up-to-date version of iTunes on my computer, or how to manually download pre-purchased content. I will not begin to explain how frustrating these low-level responses are when the issue is much larger.
I have a few theories of why this is happening, one of which is that we will only be able to authorize one of the users iTunes accounts to this iMac (despite the fact that we are using separate Mac OS user accounts). This may be the case if iTunes authorization identifies or registers the computer based on its serial number (or some other unique identifier), rather than the Mac OS user account. If that is the case, then I suspect that purchasing this iMac as an automatic download hub for 3 separate Mac OS users was pointless, and I will gleefully warn anyone away from trying to do that.
So my question(s) read(s): How does iTunes account authorization identify/register with the computer? Is it authorized to the computer serial number, or could it be authorized to a Mac OS user account?
However, if my above theory is true, then my question is: Do I have any other options?
Thanks!

I just had this problem because I logged into a friend's account on the computer I'm on now, and used the Previous Purchases feature. Well, that in turn deactived my use of the iCloud and iTunes Match on this computer when I signed back into my personal iTunes account. iTunes Support was no help, they just gave me a scripted response I would find online myself. Tried many different things, but what actually worked, was changing the Computer Name on this computer, and rebooting. Now, iTunes recoginzes this computer as a new device, yet, still is one of the 2 authorized computers on my iTunes account. Try changing the Computer Name on your troubled machine, then try associating it once again, see how that works out for you.

SECATT for assigning roles to users

Hi All,
How do we make the ECATT to work for the below scenario:
Users already have roles assigned to them. We need to add a new roles to the users which can vary in number based on the users job.
A simple ECATT script that was developed to add a single role to a new user does not work in the above case and gives an error of invalid batch input. How do I create a ECATT to assign role to user who already has a set of roles assigned (number of roles assigned to users differ, so I cannot assume to train the ECATT to assign a role on line X). Is there something I am missing while the ECATT script creation?
We are doing this from a CUA and its very difficult to assume how many roles a user could have.
Thanks,
Jay

Thanks Alex for the insight. For some reason SU10 is slow in the CUA environment and I wanted to avoid it but yes I finally had to use SU10. Talking to one of our ABAPer I came to know that even in their BDC recordings they get the error which I receeived, but he changes his program to skip all the lines with data and then fill the empty line.
In CUA environment, how do we create ECATT to delete a role from many users?
Thanks,
Jay

Configuring IDM menus for different roles for same user?

Looking forward to Sun IDM 8.x and Sun Role Manager 4.1 installation. Couple of points before the decision are -
1. If a user A has two roles R1 and R2 (for Sun IDM) then how does Sun IDM decide how the IDM console should appear (menus etc.) to the user based on whether he's logging in with Role R1 or R2? The login screen doesn't contain any input entry for choosing the role with which to log-in. With that in mind, is it even possible to have multiple roles for same login id? Or does the user have to maintain two seperate login identities?
2. Same question for Role Manager
3. Does Sun Role Manager 4.1 provide Roles merging feature?
Thanks,
AG

IDM combines the two roles. So if a user has the two roles and role R1 grants access to menu items 1,2,3 and role R2 grants access to menu items 3,4,5, the user will have access to menu items 1,2,3,4,5. If you want to separate these two roles, you will need two different login users - but what exactly are you trying to achieve there?
Can't help you with Role Manager, sorry.

For each and for all functions,personal conection

Hi
I have a questions like
can i use for each function footer in the report.
do i export personal connection into repositary if it possible any difference.
How running sum will claculate in the report.
Please any body clarify me
Regards,
Madhu

hi,
"Personal Connection" cannot be exported to repository.
i.e. A Universe which is developed using personal connection can't be exported to BO Repository. As a result, this Universe and connection will not be available to the Other Repository Users.
Running Sum
It is similar to RunningTotal in Crystal reports.
for eg. you have the below data.
A 20
B 5
C 30
If you insert a Running sum field to the above table
RunningSum([Revenue])
following are results.
A 20 20
B 5 25
C 30 55
Regards,
Vamsee

For Each function for a Concat Value

Hi:
The scenario is, we need to concat two unbounded elements and map it to a target element using for each functionality.
For example
<BookStore>
<Books>
<Name>NAME1</Name>
<Author>AUTHOR1</Author>
<BookId>1</BookId>
<Quantity>2</Quantity>
<Price></Price>
<Status></Status>
<Books>
<Books>
<Name>NAME2</Name>
<Author>AUTHOR2</Author>
<BookId>2</BookId>
<Quantity>2</Quantity>
<Price></Price>
<Status></Status>
<Books>
</BookStore>
I need to concat "Name" and "Author" which is under the unbounded element "BookStore" and map it to a single element called "Sample" on the Target side.
I am not able to use the "for-each" XSLT function to get the multiple value of Name and Author since concat function is used. Is there any other way to concat and get the multiple values of the element "Name" and "Author"?
Regards
RK

Hi Vlad:
Ok i use for-each function in my XSLT to get the vlaues of unbounded elements
eg:
<xsl:for-each select="/BookStore/Books/Name">
<request:Sample>
<xsl:value-of select="/BookStore/Books/Name"/>
</request:Sample>
</xsl:for-each>
This works perfectly fine and whenever there is a multiple vlaue for Name it is mapped to Sample and output comes as expected
<Sample>NAME1</Sample>
<Sample>NAME2</Sample>
Now i need to concat the Name and Author and pass the value to element on the target. Since name and author occuring multiple times, i am not sure how to pass the values to the element on the target

For each activity for sibling Loops

Hi All,
I have a below type of xml structrure. I am trying to use XSLT for transforming this format to separate xml which I will to insert data in DB using db adapter
<Loop-2000A>
<Element-628>1</Element-628>
<Element-734 xsi:nil="true"/>
<Element-735>20</Element-735>
<Element-736>1</Element-736>
</Loop-2000A>
<Loop-2000B>
<Element-98>PR</Element-98>
<Element-1065>2</Element-1065>
<Element-1035>ABC PQR</Element-1035>
<Element-1036 xsi:nil="true"/>
<Element-1037 xsi:nil="true"/>
<Element-1038 xsi:nil="true"/>
<Element-1039 xsi:nil="true"/>
<Element-66>PI</Element-66>
<Element-67>953893470</Element-67>
</Loop-2000B>
<Loop-2000B>
<Element-98>PR1</Element-98>
<Element-1065>22</Element-1065>
<Element-1035>abcd DDH</Element-1035>
<Element-1036 xsi:nil="true"/>
<Element-1037 xsi:nil="true"/>
<Element-1038 xsi:nil="true"/>
<Element-1039 xsi:nil="true"/>
<Element-66>PI</Element-66>
<Element-67>953893470</Element-67>
</Loop-2000B>
<Loop-2000B>
<Element-98>PR2</Element-98>
<Element-1065>24</Element-1065>
<Element-1035>pqrDCH</Element-1035>
<Element-1036 xsi:nil="true"/>
<Element-1037 xsi:nil="true"/>
<Element-1038 xsi:nil="true"/>
<Element-1039 xsi:nil="true"/>
<Element-66>PI</Element-66>
<Element-67>953893470</Element-67>
</Loop-2000B>
<Loop-2000A>
<Element-628>1</Element-628>
<Element-734 xsi:nil="true"/>
<Element-735>20</Element-735>
<Element-736>1</Element-736>
</Loop-2000A>
<Loop-2000B>
<Element-98>PL</Element-98>
<Element-1065>12</Element-1065>
<Element-1035>RAS BKU</Element-1035>
<Element-1036 xsi:nil="true"/>
<Element-1037 xsi:nil="true"/>
<Element-1038 xsi:nil="true"/>
<Element-1039 xsi:nil="true"/>
<Element-66>PI</Element-66>
<Element-67>953893470</Element-67>
</Loop-2000B>
<Loop-2000B>
<Element-98>PS2</Element-98>
<Element-1065>28</Element-1065>
<Element-1035>pqrDMH</Element-1035>
<Element-1036 xsi:nil="true"/>
<Element-1037 xsi:nil="true"/>
<Element-1038 xsi:nil="true"/>
<Element-1039 xsi:nil="true"/>
<Element-66>PI</Element-66>
<Element-67>953893470</Element-67>
</Loop-2000B>
In this case LOOP-2000A reprsents hospitals.while LOOP-2000B represents patients.One hospital can have multiple patients.Though in xml,LOOP-2000B is not child of LOOP-2000A. Actually it is like that:one LOOP-2000A is followed by many LOOP-2000B..that means one hospital has that many patients.Then next loop 2000A is followed by another set of LOOP 2000B which represents next hospital has that many patients.
I have a requirement where I need to insert records in DB,where each patient will have one record in DB.I am trying to use for-each at loop 2000A and subsequently for-each at LOOP-2000B,but it is not working.It is not iterating on next set of patients.It is always copying the same patient.
Any pointers in this regard will be helpful.

The xml was,
<ns:A xmlns ns="A">
<ns:a>1</ns:a>
<ns:a>2</ns:a>
<ns:a>3</ns:a>
<ns:A>
Edited by: Prabu on Aug 30, 2010 12:55 PM
Edited by: Prabu on Aug 30, 2010 12:55 PM
Edited by: Prabu on Aug 30, 2010 12:56 PM

Remove T Code for each ROLE for user

Similar Messages

Maybe you are looking for