Remove timeToAcknowledgeReceipt in RNIF Header Fields

my secnario is 3C3 Inovice IDOC -> XI -> RNIF11
in the header of the rosettanet message im getting the
timeToAcknowledgeReceipt tag ( Message Exchange Controls in the RNIF11
adapter )
the format of the timestamp is with Z in the end , which is invalid
note 967216 ( should be a date not a timestamp)
I tried adding to the adapter module configuration to ommit the control
record
IgnorePerformanceControlInMessage true
like mentioned in the note ,but it doesnt do anything!!!
we are PI SP 11
did some1 managed to solve that issue?
Thx.
Shai Rosenzweig

Hi Chandra
You could make a UDF on item level suppressing the first line. Code could be something like this:
for(int i=0;i<a.length;i++)
if(i==0){
result.addValue(ResultList.SUPPRESS);
else
result.addValue(a[i]);
Best regards,
Chris

Similar Messages

Delivery and Service Header Fields in RNIF Receiver Adapter for Rosettanet.

Hello all,
I need to populate the Delivery and Service header fields in Rosattenet MIME message in the receiver side.
For the sender side RNIF adapter, we can very well use the Adapter Specific message to get those fields from Rosattenet MIME message. But in my scenario, I need to use RNIF as the receiver, which will pick messages from other system and post it to RNIF.
Also, I have checked the receiver RNIF adapter, there I dont find any adapter specific messages to use.
Regards,
UP

Prasad
You have not mentioned which RNIF Adapter you are using whether 1.1 or 2.0. I will assume that you are using 2.0.
If you are using Single action responder the parameters you should configure is given here:
http://help.sap.com/saphelp_nw2004s/helpdata/en/70/d89d40c1252a54e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/fa/6b98403de08368e10000000a1550b0/content.htm
If you are using Two action responder the parameters you should configure is given here:
http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/dc9d40759c2b54e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/2c/7198403de08368e10000000a1550b0/content.htm
---Satish

Cannot retrieve my e-mail "browser sent request server could not understand. Size of request header field exceeds server limit"

Upgraded to Firefox 5.0.1 yesterday. No, after logging on to firefox, which takes me to my comcast page and when I try to get
my e-mail I get this message "your browser sent a request this server could not understand. Size of request header field exceeds server limit" Then it says something about "cookies" I also tried to connect to other sites and get similar messages. Just to let you know I am not a guru, and 80 years old, but I did not have this problem with the previous version. Question, why are the headers repeated? Could that be the problem???

This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites (e.g. comcast) that cause problems.
"Clear the Cache":
* Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Firefox > Preferences > Privacy > Cookies: "Show Cookies"

MQ JMS non-compliant header field in HEXADECIMAL

Hello Experts,
Our scenario include a sender MQ Channel and a Receiver File adapter. We are passing a flat file using an Integrated Scenario to the file adapter. We are using the JMS CorrelationID header field to pass the file name to the file adapter. Unfortuantely, File adapter is receiving the filename in a HEX. So, the Filie adapter is writing the filename as huge value. I am not sure how this JMSCorrelationID header field is converting a string into a HEX value.
Any kind of help would be appreciated.
Thanks,
Mayur

hi
Try using 2 ways..
1. As Koen said.tick the JMS coorelation id on the adapter specific message attributes on the sender JMS adatper...
Then in a UDF....access this field and convert its byte format to string...but there might be character set issues
2. in the co-relation setting , set the PI message ID - to JMS correlation ID and tick the remove ID marker.
With this JMS corelation ID will be passed to PI message ID and then in UDF extract the PI message ID and pass it to filename
Edited by: Tarang Shah on Mar 25, 2010 1:52 PM

How to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL)

Hi Experts,
Can you please tell me to how to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL) when saving of the shipment document.

shipment cost calculation only on the Leg level and not on header level. Currently a lot of confusion happened after creating the shipment cost document and found that the status is u201CBu201D.
now we intend to define detailed specifications to how to create this new user exit to update the shipment cost relevancy at shipment header.
The main functionality of the user exit to be created is to remove the check from ShpmntCostsRel. (field VTTK-    FRKRL).can u pls tell how to do this.

Accessing Message Header fields from envelope

I am doing an interface with the RNIF adapter. They want me to pull the delivery header information, which is in the RNIF envelope, not the payload document and map it into some fields that exist in the inbound schema. Can this be done in message mapping? I would suppose that this question would apply if one wanted message header fields from the SOAP envelope also.
Kind Regards,
Chris

Have you checked this ?
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
Regards,
Amol

Cookie - Bad Request - Size of a request header field exceeds server limit -

We are on cq5.5. We see this error intermittently. What is the best way to fix this? Cookie size seems to be adding to the issue.
Bad Request
Your browser sent a request that this server could not understand.
Size of a request header field exceeds server limit.
Cookie: cq-mrss=path%3D%252Fcontent%252Fdam%26p.limit%3D-1%26mainasset%3Dtrue%26type%3Ddam%3AAsse t; __unam=acfbce4-13b8ffd6084-6070cfe6-4; __utma=16528299.1850197993.1355330446.1361568697.1362109625.3; __utmz=16528299.1355330446.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none); REM_ME=1004; SessionPersistence-author-lx_qa_author2=CLIENTCONTEXT%3A%3DvisitorId%3Danonymous%2Cvisito rId_xss%3Danonymous%7CPROFILEDATA%3A%3DauthorizableId%3Danonymous%2CformattedName%3DAnonym ous%20Surfer%2Cpath%3D%2Fhome%2Fusers%2Fa%2Fanonymous%2Cavatar%3D%2Fetc%2Fdesigns%2Fdefaul t%2Fimages%2Fcollab%2Favatar.png%2Cage%3D%2Cage_xss%3D%7CTAGCLOUD%3A%3Dtopic%3Aworkflow%3D 14%2Cindustry%3Aprocess_management%3D2%2Ctopic%3Aprocess_mining%3D3%2Ctopic%3Aprocess_docu mentation%3D1%2Ctopic%3Aintelligent_capture%3D5%2Cindustry%3Acapture%3D5%2Ctopic%3Adocumen t_imaging%3D2%2Ctopic%3Adistributed_intelligent_capture%3D2%2Ctopic%3Adocument_output_mana gement%3D4%2Cindustry%3Acontent_management%3D14%2Cindustry%3Asoftware_solutions_hardware%3 D4%2Cindustry%3Adevice_management%3D2%2Ctopic%3Ahelp_desk_services%3D2%2Cindustry%3Aintera ct%3D15%2Ctopic%3Asecure_content_monitor%3D2%2Ctopic%3Aelectronic_forms%3D2%2Ctopic%3Ainte lligent_forms%3D2%2Ctopic%3Adocument_accounting%3D2%2Ctopic%3Aerp_output_management%3D2%2C topic%3Aprint_release%3D2%2Cindustry%3Aoutput_management%3D4%2Ctopic%3Aerp_printing%3D4%2C topic%3Aenterprise_search%3D4%2Ctopic%3Amicrosoft_sharepoint%3D6%2Ctopic%3Adocument_filter s%3D4%2Cindustry%3Asearch%3D4%2Ctopic%3Ahuman_services_case_management%3D2%2Cindustry%3Aca se_management%3D2%2Cindustry%3Aimprove_business_processes%3D6%2Ctopic%3Abusiness_process_m odeling%3D1%2Ctopic%3Alawson%3D1%2Ctopic%3Aapplication_integration%3D8%2Cindustry%3Asoluti on%3D4%2Ctopic%3Amicrosoft_dynamics_crm%3D2%2Cindustry%3Ahealthcare%3D13%2Cindustry%3Areta il%3D8%2Cindustry%3Abanking%3D3%2Cindustry%3Aincrease_efficiency%3D7%2Cindustry%3Agovernme nt%3D8%2Ctopic%3Amicrosoft_outlook%3D2%2Ctopic%3Aesri%3D2%2Ctopic%3Ajd_edwards%3D2%2Ctopic %3Asap%3D1%2Cindustry%3Adrive_business_growth%3D1%2Cindustry%3Abusiness_challenges%3D6%2Ci ndustry%3Aconnect_distributed_workforce%3D1%2Ctype%3Alanding_page%3D2%2Ctopic%3Aconsulting _services%3D2%2Ctopic%3Aretail_pharmacy%3D2%2Cindustry%3Aindustry_solutions%3D5%2Ctopic%3A health_information_management%3D3%2Ctopic%3Apatient_scheduling%3D3%2Ctopic%3Aclinical_depa rtment_solutions%3D3%2Ctopic%3Aclinical_hit_integration%3D3%2Ctopic%3Apatient_admissions_r egistration%3D3%2Ctopic%3Ahealthcare_forms_management%3D3%2Ctopic%3Apatient_access%3D3%2Ct opic%3Aenterprise_print_management_software%3D2%2Ctopic%3Aprint_queue_management%3D2%2Ctop ic%3Aadvanced_print_management%3D2%2Ctopic%3Aemployee_onboarding%3D3%2Ctopic%3Ahuman_resou rces%3D1%2Cindustry%3Ahuman_resources%3D3%2Ctopic%3Aemployee_recruitment%3D1%2Cindustry%3A manufacturing%3D2%2Ctopic%3Aplatform_integration%3D1%2Ctopic%3Awealth_management%3D2%2Cind ustry%3Afinancial_services%3D2%2Ctopic%3Aaccount_opening%3D2%2Ctopic%3Acompliance%3D1%2Cin dustry%3Acompliance%3D1%2Ctopic%3Abusiness_operations_solutions_for_banking%3D2%2Ctopic%3A retail_delivery%3D1%2Ctopic%3Aloan_processing%3D1%2Ctopic%3Aon_demand_negotiable_documents %3D1%2Ctopic%3Anew_account_openings%3D1%2Ctopic%3Aon_demand_forms_customer_communications% 3D1%2Cindustry%3Ainsurance%3D1%2Ctopic%3Amicr_printing%3D1%2Ctopic%3Abank_branch_capture%3 D1%2Ctopic%3Aagency_capture%3D1%7C; ys-cq-damadmin-tree=o%3Awidth%3Dn%253A240%5EselectedPath%3Ds%253A/content/dam; ys-cq-damadmin-grid-assets=o%3Acolumns%3Da%253Ao%25253Aid%25253Ds%2525253Anumberer%25255E width%25253Dn%2525253A23%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253At humbnail%25255Ewidth%25253Dn%2525253A45%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25 253Ds%2525253Atitle%25255Ewidth%25253Dn%2525253A78%25255Ehidden%25253Db%2525253A1%25255Eso rtable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Aname%25255Ewidth%25253Dn%2525253A3 37%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Apublished%25255Ewidth%2 5253Dn%2525253A37%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Amodified %25255Ewidth%25253Dn%2525253A78%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%25 25253Ascene7Status%25255Ewidth%25253Dn%2525253A78%25255Ehidden%25253Db%2525253A1%25255Esor table%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Astatus%25255Ewidth%25253Dn%2525253A 71%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Dn%2525253A8%25255Ewidth%25253Dn%2 525253A78%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Aworkflow%25255Ew idth%25253Dn%2525253A78%25255Ehidden%25253Db%2525253A1%25255Esortable%25253Db%2525253A1%25 5Eo%25253Aid%25253Ds%2525253Awidth%25255Ewidth%25253Dn%2525253A37%25255Esortable%25253Db%2 525253A1%255Eo%25253Aid%25253Ds%2525253Aheight%25255Ewidth%25253Dn%2525253A37%25255Esortab le%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Asize%25255Ewidth%25253Dn%2525253A37%25 255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Areferences%25255Ewidth%25253 Dn%2525253A199%25255Esortable%25253Db%2525253A1%5Esort%3Do%253Afield%253Ds%25253Alabel%255 Edirection%253Ds%25253AASC; amlbcookie=04; ObLK=0x82abacf3a5e3b1e2|0x1cf34305ac210c7e9b2b07e3725392e2; iPlanetDirectoryPro=AQIC5wM2LY4Sfcw0UQ2MST5NlqDAsUi2dscer0wO7VMy9pE.*AAJTSQACMDYAAlMxAAIw NA..*; renderid=rend01; login-token=c9c0d027-c5f9-4e5a-9a90-09d1cf21cfd2%3a0279e369-1689-433c-80ef-d8411040efe5_6 15c2fd1eba8fd42%3acrx.default; ys-cq-siteadmin-grid-pages=o%3Acolumns%3Da%253Ao%25253Aid%25253Ds%2525253Anumberer%25255E width%25253Dn%2525253A23%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253At humbnail%25255Ewidth%25253Dn%2525253A50%25255Ehidden%25253Db%2525253A1%25255Esortable%2525 3Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Atitle%25255Ewidth%25253Dn%2525253A386%25255Es ortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Aname%25255Ewidth%25253Dn%2525253A 148%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Apublished%25255Ewidth% 25253Dn%2525253A25%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Amodifie d%25255Ewidth%25253Dn%2525253A86%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2 525253Ascene7Status%25255Ewidth%25253Dn%2525253A86%25255Ehidden%25253Db%2525253A1%25255Eso rtable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Astatus%25255Ewidth%25253Dn%2525253 A76%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Aimpressions%25255Ewidt h%25253Dn%2525253A86%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Atempl ate%25255Ewidth%25253Dn%2525253A86%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds %2525253Aworkflow%25255Ewidth%25253Dn%2525253A86%25255Ehidden%25253Db%2525253A1%25255Esort able%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2525253Alocked%25255Ewidth%25253Dn%2525253A8 6%25255Ehidden%25253Db%2525253A1%25255Esortable%25253Db%2525253A1%255Eo%25253Aid%25253Ds%2 525253AliveCopyStatus%25255Ewidth%25253Dn%2525253A86%25255Ehidden%25253Db%2525253A1%25255E sortable%25253Db%2525253A1%5Esort%3Do%253Afield%253Ds%25253Atitle%255Edirection%253Ds%2525 3AASC; ys-cq-siteadmin-tree=o%3Awidth%3Dn%253A306%5EselectedPath%3Ds%253A/content/homesite/en-US /insights/video_unum-group-accelerates-workflows-with-solutions-; ys-cq-cf-clipboard=o%3Acollapsed%3Db%253A1; ys-cq-cf-tabpanel=o%3AactiveTab%3Ds%253AcfTab-Images-QueryBox; JSESSIONID=ad311ac3-7c24-4e62-ae8a-0ebacd8e8188; SessionPersistence-author-lx_qa_author1=CLIENTCONTEXT%3A%3DvisitorId%3Danonymous%2Cvisito rId_xss%3Danonymous%7CPROFILEDATA%3A%3DauthorizableId%3Danonymous%2CformattedName%3DAnonym ous%20Surfer%2Cpath%3D%2Fhome%2Fusers%2Fa%2Fanonymous%2Cavatar%3D%2Fetc%2Fdesigns%2Fdefaul t%2Fimages%2Fcollab%2Favatar.png%2Cage%3D%2Cage_xss%3D%7CGEOLOCATION%3A%3D%7CTAGCLOUD%3A%3 Dindustry%3Aconnect_distributed_workforce%3D1%2Cindustry%3Abusiness_challenges%3D1%2Cindus try%3Acontent_management%3D1%2Cindustry%3Ahealthcare%3D1%2Ctopic%3Afinance%3D1%2Ctopic%3Ap rocurement_processing%3D1%2Cindustry%3Afinancial_services%3D2%2Cindustry%3Ainsurance%3D2%2 Cindustry%3Aindustry_solutions%3D2%2Ctopic%3Aagency_capture%3D2%7C; s_cc=true; s_sq=lxmtest%3D%2526pid%253Dinsights%25253Avideo_unum-group-accelerates-workflows-with-so luti

Hi EbodaWill,
File daycare for fp 2324 where in you can configure & allow you to increase the request header size and avoid the bad request error OR for a package that improves client side persistence & does not use cookies.
Thanks,
Sham

Invoice Template problem - Putting a Header field in repeating Lines rows

Dear experts,
I would be grateful for a problem I am having with an Invoice statement I am developing (Oracle Applications 11.5.10 with BI Publisher version 10.1.3.4). This is very similar to the one in Tim Dexter's Blog (Anatomy of a Template):
http://blogs.oracle.com/xmlpublisher/2007/03/anatomy_of_a_template_ii_heade.html
My requirement is to add a single line into the lines table, as seen in the Blog, which is a COMMENTS field from the header part of the XML and the problem is that it can be 1 line to maybe 5 lines. This is only on the first page. This causes problems as I don't know how to find out how far down the lines table I may be after adding this COMMENTS header field in here, to then know how many lines to loop over to ensure that the lines do not carry on printing over the bottom of the page e.g. if the COMMENTS is 3 lines - how do I know this to then only print 3 minus the maximum lines per page ($lpp) only on the first page?
Any pointers would be of great help.
Many thanks,
Mark

The COMMENTS field I've found out can be of any varible size and include carriage returns. For example, could be:
JD Trx special instructions 010908
FAO: PETER MUSCUTT
REF: FERRY ROAD 2351
========================
INCOME DUE TO COMPANY FOR
THE OPERATION OF EFERRY
ROAD CAR PARK
This causes such problems as being able to know how many lines this field will be, so that I know where to start the first Lines row in the invoice and also how many lines I can put on this first page (starting point - $lpp).
One method I thought would be to count how many characters there are in this field, when it reaches the line size on the invoice, increment a count varible that would be used to indicate the starting point for the first lines record. I would need to compare each character and if it is a carriage return, then increment the count also. This seems quite a heavy wieght way to solve this and would welcome any over ideas.
Thanks,
Mark

How do I add and remove text in a text field with a checkbox?

How do I add and/or remove text in a text field with a checkbox?
this is my script in the text box......
event.value="Hello, this is my narrative. \r\n\nFamily: \r\n\n" + this get.Field("FirstName").value + " " + this.getField("LastName").value + was born on"=this.getField("DOB.value + "\r\n\n + this.getField("drpField").value + "\r\n\n" + this getField("Father").value
The text box looks like this...
Hello, this is my narrative.
FAMILY:
John Smith was born on 08/02/2000
Boby Lou
Jack Smith
I need to add/or remove the father field (Jack Smith) & r/n/n with a check box.
Does anyone know how to do this?

There are multiple errors in your code...
Use this code instead (adjust the name of the check-box):
var msg = "Hello, this is my narrative. \r\n\nFamily: \r\n\n" + this get.Field("FirstName").value + " " + this.getField("LastName").value + was born on" + this.getField("DOB.value) + "\r\n\n" + this.getField("drpField").value;
if (this.getField("FatherCheckBox").value!="Off")
msg += "\r\n\n" + this getField("Father").value;
event.value = msg;

Unable to remove the redundant group header from the bottom of page

Hi,
In one of my projects in I am facing a problem.
I need to display the details of all available products of the company. While displaying the details, I need to group the products based on some criteria (like type of product, release date) and the grouping is upto 4 level grouping. Grouping criteria can se said as, I need to firstly group all the products based on the type, then on the Release Date and then on two of the client specific values on the Product.
Along with this, the view of product details is a thumbnail view (Image on top with all details below that line after line) due to which I need to display multiple (5) products in one row.
The problem which I am facing is:
The most important criterion for the customer is that there should not be any wastage of space.
Secondly, they also donu2019t want to see partial data like only the header data in one page and the Product related Data (Image and Info) on the next page.
In my case, when first page has insufficient space for the next grouped products, it simply displays the group header on the first page. On the second page, it again displays the group header along with the data.
For reference, images are available at:
Image1: http://farm4.static.flickr.com/3454/3224626688_aa3cfb8236_m.jpg
Image2: http://farm4.static.flickr.com/3373/3224626782_0501cf566f_m.jpg
My requirement is to remove the redundant group header from the first page as it does not make sense without having any data below it.
I have tried the following options:
1. I tried to apply setting "Keep Group Together" on the group and "Repeat Group Header On Each Page". But when I apply this, when my second group has more than 5 products (two rows of data) and space on first page can accommodate only 1 row of data, it moves the data on to the second page instead of keeping the 1st row on first page and 2nd on second page. This solution is not acceptable to the customer as it wastes space.
2. If I remove setting "Keep Group Together" on all the groups, but keep the "Repeat Group Header On Each Page" and remove the "Keep Object Together" in the details section, I can save space. But this is not acceptable to the user as it leaves dangling headers (Orphaned Header Information).
Need some pointers to overcome this issue as it is very critical for me.
Thanks in advance,
Vibhav Agrawal

Thanks Raghavendra for your reply.
These solutions provided on the link are not useful for me because of the peculiar layout of my report.
In my report I am supposed to show details of multiple items (upto 5/6) in a single row.
All solutions suggest about adding additional header (below group header) and use the formula to use that header to put the data for initial first object and details section for the subsequent objects.
But, since i need to display multiple items in same row...and data cannot be set as 'format with multiple columns' in the header, hence this solution does not work for me
Thanks,
Vibhav Agrawal

How to view "From" header field in OUTgoing messages in Mail? Frustrating.

In Mail v.4.3 (in OSX 10.6.4), I need to view the "From" field in my outgoing messages as I am composing them. However, there seems to be no setting in Mail which allow this.
I find this very frustrating because in Eudora (which I used to use), the "From" field in outgoing messages is visible by default. But in Mail, not only is it not visible by default, there seems to be no way to make it visible.
In the "Customize..." button to the left of the Subject field in outgoing messages, one has the option to add as default outgoing message fields "cc," "bcc," "Reply-To," and "Subject," but none of those are what I want. It allows one to also view the address of the mail server, but that also is not what I'm looking for. What I want is to see my outgoing +email address+. And nowhere is there an option in the Preferences to turn this on. (At least as far as I could tell.)
In fact, the only way to see the identity in the outgoing "From" field is to go to Preferences, then click on Accounts, and look there; or send oneself a test email. Both of which are a hassle and should be unnecessary.
In case you're curious as to why I want to see my outgoing "From" header field:
I have several different "personas" online, each of which uses a different email address: My work address (with a work-related domain); my family/personal address (with a different email address than my work address); an online avatar I use in various gaming sites (also with its own address, since I don't want to use my personal name/address in the gaming community); and so on. However, I have all incoming emails to all accounts auto-forwarded to the same central email account. Most of the time I'm just replying to business emails, so my outgoing "Full Name" and "Email Address" (in Preferences>Accounts) are generally set to my business name and address; but on occasion when I want to reply to a non-business email and not have the recipient see my business email address, I go in to Preferences>Accounts and change "Full Name" and "Email Address" (i.e. what is displayed to the user) to something different. And when I'm done with that, I change it back to my business address.
However, sometimes I forget if I've changed it back or not, or forget what I've changed it to. In Eudora, All one needed to one was create a new outgoing email and it would display the "From" field so I could instantly see my outgoing identity. But in Mail, there is no "From" field in outgoing emails, so I'm constantly nervous and wondering which outgoing identity I may have changed to and accidentally forgotten to change back from.
(Yes, yes, I know that if a recipient wanted to be snoopy, they could look at the "full headers" of any incoming email and see the name of my email server, which may different from my displayed email address; but we're not talking about spy-stuff here, I'm just trying to not confuse people and keep business separate from personal.)
So: is there any way for me to see the outgoing "From" field in the emails I send? Or am I condemned to constantly (and mostly unnecessarily) checking "Preferences>Accounts" to see what I have enetered there?

Thanks for replying.
What is the "compose window" to which you are both referring? I could find no reference to such a thing in the Mail menus or Help.
Do you mean the "Composing" pane in the Preferences? I don't see what either one of you is referring to there, but I did notice there something that could function as an awkward workaround: If I click on the "Automatically CC myself" box in Preferences>Composing, then when I start a new email, my email address is displayed in the "CC" field -- and luckily, Mail allows me to then delete my email address out of the CC field, so I don't have to spam myself with duplicate copies of all my emails. This way, I can at least briefly see what email address I'm using, before I delete it from the CC field. Pretty awkward and unnecessarily laborious, however -- still not a perfect solution.
Or, by "composing window," are you referring to an outgoing email? As I said in my original comment, I do see what Ernie called "a small box with lines and an arrow at the bottom left of the header box." This is what I had to say about it:
+"In the "Customize..." button to the left of the Subject field in outgoing messages, one has the option to add as default outgoing message fields "cc," "bcc," "Reply-To," and "Subject," but none of those are what I want. It allows one to also view the address of the mail server, but that also is not what I'm looking for. What I want is to see my outgoing email address. And nowhere is there an option in the Preferences to turn this on. (At least as far as I could tell.)"+
In other words, when Ernie says, "click the box beside From," I can't do that -- because there is no such option. That's the whole problem in the first place. If there was a "From" field beside which I could click a box to make it appear, I would have done so! But there is no "From" field in the "Customize" section of the "small box with lines and an arrow at the bottom left of the header box."
I find it completely mystifying that both of you seem to be able to see a "From" field available to be added to the header of outgoing emails, yet no such option is available to me in Mail. What possibly could be causing this? 10.6.4 is freshly installed on my machine, and Mail seems brand new and uncorrupted. And I'm using Mail 4.3, the latest version.
Are you saying that everyone else can see an option to have a "From" field in their outgoing messages, but I uniquely don't? Very very very strange.

How can I remove ASCII text from a field when I use it in a query

How can I remove ASCII text from a field when I use it in a query?
I am running a select statement on a table that appears to have ASCII text in some of the fields. If I use these fields in the where statement like the code below nothing returns:
SELECT FIELD1 FROM TABLE1 WHERE FIELD1 IS NULL
But the field looks empty if I do a straight select without the where clause. Additionally, one of the fields has text but appears to be padded out with ASCII text, which I need to strip out before I can use this field in a where or join statement. I have tried using a trim, ltrim, rtrim, to_char, nvl, decode and nothing works. When I use excel to run the same query it looks as if these ASCII fields are boxes.
I have asked our DBA team to see what they can do to prevent these from going into the table, but in the mean time I still need to run this report.
Do you have any suggestions?

Can you provide an example? I've been trying (for
example) "select translate(' test one', ascii(' '),
'X') from dual" with no luck.
Thank you.To replace space, you should query like this:
select translate(' test one', chr(32), 'X') from dual instead of select translate(' test one', ascii(' '), 'X') from dual Thanks,
Dharmesh Patel

I can no longer access Bejeweled Blitz through my facebook account. I get the message that says, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit". Help please.

I can no longer access Bejeweled Blitz through facebook. I get the message, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit". I can access Bejeweled through FB using my husband's log in so to me that suggests the problem is with my log in. Help please.

Contact FB or use another browser.

Making a header field as non editable while creating PO using ME21n

Hi Friends,
Could any one tell me the BADI or screen exit to make a header field (for eg: EKGRP - Purchasing Group) as non editable after giving default value to it?
Thanks in advance,
Ram

Hi Ram,
goto se80 t-code and give 'ME' package, and now see the enhancements available.
You l get a relavent one, if you go through all those.
Hope this helps
Regards,
Sujatha

PPCO0007 User Exit for Changing Header Fields During Order (CO40)

.. Hi !!!!
I need your help or suggestions,
I need to change the standar order before to save, i found the user exit PPCO0007,
i assign the new value for the order, but when finish the fuction, EXIT_SAPLCOZV_001, the new values are
lost, and finally the system set the standard order.
Someona know how can change the order and the the batch.
Thanks
Noemí Huerta

Hi Noemi
You can use the enchancement PPCO0007 (exit when the production order is saved).
Use the function module EXIT_SAPLCOZV_001 (User Exit for Checking or Changing Header Fields During Order Save) to update the field priority starting the information in the material-customer info record.

Remove timeToAcknowledgeReceipt in RNIF Header Fields

Similar Messages

Maybe you are looking for