Removing a TransformGroup?

Hello,
I am creating a special animation program and to save resources, I would prefer to have transform group nodes removed. These transform group nodes contain the components of the animation but after the user decides to view a different animation, these transform groups become obselete. I have tried using the removeAllChildren() method but that does not seem to work on transform groups. I know you guys have had a lot of problems getting rid of nodes from a scenegraph because I read some previous topics posted on this issue. Anyone know a good solution?

Since only BranchGroups can be removed from the scene, you need to create a BranchGroup and then add your TransformGroup to it. Once you are done with the TransformGroup, you can remove the BranchGroup.
Don't forget to setCapability(BranchGroup.ALLOW_DETACH) to the BranchGroup or else you will have problems when you try to remove it.
fitz

Similar Messages

Removing a single object when multiple objects share the same name?

The below code uses a for loop to make spheres as in this thread:
http://forum.java.sun.com/thread.jspa?forumID=21&threadID=320945
However, the name is always sphere. I have another part of the code that,
using collision detection, removes a sphere using the tg.removeChild(); command when another sphere (created elsewhere) is
within a set proximity. But how do I specify which sphere it should remove when they are all called 'sphere'? Can I use a
object ID to get around this and if so, how?
    public void makeSpheres()
       Color3f lightColour = new Color3f(0.0f, 0.0f, 1.0f);    //Blue light
       Vector3f lightDirection = new Vector3f(4.0f, -7.0f, -12.0f);
       for (int i=0; i==5; i++)
           Sphere sphere = new Sphere(0.25f);
           BoundingSphere bounds = new BoundingSphere(new Point3d( getXCoords(), getYCoords(), getZCoords()), 100.0);
           DirectionalLight light = new DirectionalLight(lightColour, lightDirection);     //Each sphere has a blue light
           light.setInfluencingBounds(bounds);
           TransformGroup tg=new TransformGroup(); //Create new TG
           Transform3D transform=new Transform3D();
           Vector3f vector = new Vector3f(setXCoords(),setYCoords(),setZCoords()); //Set Position
           transform.setTranslation(vector);
           tg.setTransform(transform);           //Add sphere to scenegraph
           tg.addChild(sphere);
           Play2.objRoot.addChild(tg);
       }

Basically, you get a reference to the object you click on through one of the Pick tools from the Pickfast api. Then you iterate over the scenegraph until you find the object your picktool returned. Then you remove it. Check out the examples at
https://java3d.dev.java.net/binary-builds.html
If there are a known finite number of spheres you can keep references to them in a list or a Switch.
regards

How do I do to add and remove Shape3D objects dynamically from TransfGroup?

Hi, everyone,
How do I do to add and remove Shape3D objects dynamically from TransformGroup?
I have added two Shape3D objects in the TransformGroup and I wanted to remove one of it to add another. But, the following exception occurs when I try to use �removeChild� :
�Exception in thread "AWT-EventQueue-0" javax.media.j3d.RestrictedAccessException: Group: only a BranchGroup node may be removed at javax.media.j3d.Group.removeChild(Group.java:345)�.
Why can I add Shape3D objects and I can�t remove them? Do I need to add Shape3D object in the BranchGroup and work only with the BranchGroup? If I do, I think this isn�t a good solution for the scene graph, because for each Shape3D object I will always have to use an associated BranchGroup.
Below, following the code:
// The constructor �
Shape3D shapeA = new Shape3D(geometry, appearance);
shapeA.setCapability(Shape3D.ALLOW_GEOMETRY_READ);
shapeA.setCapability(Shape3D.ALLOW_GEOMETRY_WRITE);
shapeA.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
shapeA.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
Shape3D shapeB = new Shape3D(geometry, appearance);
shapeB.setCapability(Shape3D.ALLOW_GEOMETRY_READ);
shapeB.setCapability(Shape3D.ALLOW_GEOMETRY_WRITE);
shapeB.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
shapeB.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
BranchGroup bg = new BranchGroup();
bg.setCapability(ALLOW_CHILDREN_READ);
bg.setCapability(ALLOW_CHILDREN_WRITE);
bg.setCapability(ALLOW_CHILDREN_EXTEND);
TransformGroup tg = new TransformGroup();
tg.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
tg.setCapability(TransformGroup.ALLOW_TRANSFORM_READ);
tg.setCapability(TransformGroup.ALLOW_CHILDREN_READ);
tg.setCapability(TransformGroup.ALLOW_CHILDREN_WRITE);
bg.addChild(tg);
tg.addChild(shapeA);
tg.addChild(shapeB);
// The method that removes the shapeB and adds a new shapeC �
Shape3D shapeC = new Shape3D(geometry, appearance);
shapeC.setCapability(Shape3D.ALLOW_GEOMETRY_READ);
shapeC.setCapability(Shape3D.ALLOW_GEOMETRY_WRITE);
shapeC.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
shapeC.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
tg.removeChild(shapeB);
tg.addChild(shapeC);Thanks a lot.
aads

�Exception in thread "AWT-EventQueue-0"
javax.media.j3d.RestrictedAccessException: Group:
only a BranchGroup node may be removed I would think that this would give you your answer -
Put a branch group between the transform and the shape. Then it can be removed.
Another thing you could try: This doesn't actually remove the shape, but at least causes it to hide. If you set the capabilities, I think you can write the appearance of the shapes. So, when you want to remove one of them, write an invisible appearance to it.

HOW TO remove nodes add nodes dynamically create objects branchgroup

After much trial and error, frustration and reading this forum I have come across a good way to dynamically add/remove objects. This is working in my model with 1.3 and jdk 1.4.1_02 Sorry if its sloppy.
Here goes:
Adding objects (cap bits may not be optimised):
(A)
BranchGroup newDynObj = null;
switch (workerType)
case 1: //create a rawEntry BranchGroup
newDynObj = new RawEntry();
break;
case 2: //create a Finshed Node
newDynObj = new FinishedNode();
break;
default:
newDynObj.setCapability(BranchGroup.ALLOW_CHILDREN_EXTEND);
newDynObj.setCapability(BranchGroup.ALLOW_DETACH);
newDynObj.setCapability(Group.ALLOW_CHILDREN_READ);
newDynObj.setCapability(Group.ALLOW_CHILDREN_WRITE);
Transform3D t = new Transform3D();
t.set(scale, new Vector3d(xpos, ypos, zpos));
TransformGroup objTrans2 = new TransformGroup(t);
objTrans2.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
objTrans2.setCapability(TransformGroup.ALLOW_TRANSFORM_READ);
objTrans2.setCapability(TransformGroup.ALLOW_CHILDREN_READ);
objTrans2.setCapability(TransformGroup.ALLOW_CHILDREN_WRITE);
objTrans2.setCapability(BranchGroup.ALLOW_CHILDREN_EXTEND);
Sphere obj = new Sphere(1.0f, Sphere.GENERATE_NORMALS | Sphere.GENERATE_TEXTURE_COORDS,
5, app);
//add to scene graph
objTrans2.addChild(obj);
newDynObj.addChild(objTrans2);
newDynObj.compile();
return newDynObj;
call this ftn with:
Space3DPanel.objTrans.addChild(createObject(createAppearance(workerType), 0.04, x, y, z, 2)); where objTrans is your tansformGroup
Removing branchgroup:
Its easy to add. But the trick is to delete/remove these !?! Detach doesnt seem to do anything. The method/pattern that works for me is to..
1. make a new class subclassing BranchGroup like this:
public class FinishedEntry extends BranchGroup
{ private String type;
public FinishedEntry(){ }
public FinishedEntry(String type)
{ this.type = type; }
and
public class RawEntry extends BranchGroup
private String type;
public RawEntry(){ }
public RawEntry(String type)
{ this.type = type;}
2. To when adding the BG to the TG of the parent (objTrans)
add a BG of the type you subclassed.
see (A) above.
3. Now scan through the children of the TG that you have been adding these children to. Like this:
static synchronized public void removeNodeFromModel(int workerType)
try {
switch (workerType)
case 1: //raw Entry
for (int i = 0; i < Space3DPanel.objTrans.numChildren(); i++)
if (Space3DPanel.objTrans.getChild(i) instanceof RawEntry)
Space3DPanel.objTrans.removeChild(i);
break;
break;
case 2: //result Entry
for (int i = 0; i < Space3DPanel.objTrans.numChildren(); i++)
if (Space3DPanel.objTrans.getChild(i) instanceof FinishedNode)
Space3DPanel.objTrans.removeChild(i);
break;
} //end for
break;
default:
} catch (Exception e) { e.printStackTrace(); }
The main idea is to use instanceof !! then use removeChild (see above).. Also, you can compile your BGs using this method.
Thanks for the great forum!
Jacob Pyrett
[email protected]

First, to add child nodes to a branch group, you must follow two rules:
(1) The child you are adding to the branch group is also a BranchGroup
(2) The BranchGroup.ALLOW_CHILDREN_EXTEND capability is set
From here, you are able to add children on the fly.
To remove a child from the branch group was harder to figure out, but I eventually got it to work. To accomplish this you must do the following:
(1) have the capability BranchGroup.ALLOW_DETACH) set on the child BranchGroup you wish to remove.
(2) call the child's detach() method rather than calling the parent's removeChild()
Hope this helps.

How to put 2D graphics in TransformGroup?

I can use J3DGraphics2D to draw graphics in Canvas3D, but may i put the graphics i drawed in a TransformGroup so that i can remove them later?

I am anxious to know how to put 2D graphics in 3D TransformGroup, because
I want to pick 2D graphics in 3D scene. For example, I drew some 2D graphics
in 3D scene, line, sphere, rect, I may pick one using mouse. As we know, we can
use PickMouseBehavior to pick 3D Graphics, How can I to 2D Graphics? Thanks a lot!

Error Level 10: I have this error where a plugin broke that I had to remove because it was not finding it. How do i install it back so it functions?

8/29/2014 7:15am
It seems to me that if Microsoft's platform can not fix it with the troubleshooter that the troubleshooter sucks. It does not know when errors are thrown so your developer sucks on creating software for errors that are popping up in your software?
if a error is thrown in Windows 8 it should catch it upon a thrown error in programming? This hsould be a level 1 ticket. Since when I call you support for error in your product no one wants to address problems in your software and get mea tech to resolve
it?
The question now is how do I fix this and why is it causing me an internal error 500 for my web server install?
I may have other issues but I need access to my web server through my browser I used fsocketopen to troubleshoot it?
It gets back a internal 500 on Gecko process in firefox and on IE it just won't serve out the document in my web server abyss or apache? So the question is what service is broken so I can't serve my [web server] pages out? Let me go through all the event
logs that I have with errors below?
Under Applications:
1) Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 10
2) LMS Service cannot connect to Intel(R) MEI driver. Error level 1
3) Failure to load the application settings for package microsoft.windowscommunicationsapps_8wekyb3d8bbwe. Error Code: 3
4) SearchIndexer (3476) Windows: The database engine attached a database (1, C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb). (Time=0 seconds)
5) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.125, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000, [11] 0.000, [12] 0.000.
Saved Cache: 1 0: Evenet Id level 326.
6) SearchIndexer (3476) Windows: The database engine started a new instance (0). (Time=0 seconds)
7) Internal Timing Sequence: [1] 0.000, [2] 0.000, [3] 0.000, [4] 0.000, [5] 0.000, [6] 0.000, [7] 0.000, [8] 0.000, [9] 0.000, [10] 0.000. eveent level 105
8) SearchIndexer (3476) Windows: The database engine (6.03.9600.0000) is starting a new instance (0). Error Level 102
Under Security:
1) We might want to check this out here User Account Management changed?
Under Setup: no errors.
Under System below:
1) Name resolution for the name win8.ipv6.microsoft.com. timed out after none of the configured DNS servers responded.Event level 1014
2) Intel(R) 82567LM-3 Gigabit Network Connection
Network link is disconnected.
3) The system has returned from a low power state.
Sleep Time: ‎2014‎-‎08‎-‎29T05:10:07.602701000Z
Wake Time: ‎2014‎-‎08‎-‎29T13:13:47.945773100Z
Wake Source: Device -USB Root Hub : Error level 1
4) The browser has forced an election on network \Device\NetBT_Tcpip_{58565081-3013-43B6-AE07-CC89C71F6036} because a master browser was stopped. Event Id 8033.
5) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_EPSON&Prod_Storage&Rev_1.00#7&2d369789&0&533536503532383375&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}. Event error 219.
6) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\{3c83e4cf-28e9-11e4-827b-b8ac6f8aec21}#0000000000004000. Error Level Id 219.
7) The UMDF reflector was unable to complete startup because the WUDFPf service was not found. This service may be started later during boot, at which point Windows will attempt to start the device again. Error Id 10114.
8) Unable to bind to the underlying transport for [::]:80. The IP Listen-Only list may contain a reference to an interface which may not exist on this machine. The data field contains the error number. Event Id 15005.
9) The supersafer64 service failed to start due to the following error:
The system cannot find the file specified. Event ID 7000.
10) The SNMP Service encountered an error while accessing the registry key SYSTEM\CurrentControlSet\Services\SNMP\Parameters\TrapConfiguration. Error: 1500.
11) The SAS Core Service service failed to start due to the following error:
The system cannot find the file specified. 7000
12 The World Wide Web Publishing Service (WWW Service) did not register the URL prefix http://*:80/ for site 1. The site has been disabled. The data field contains the error number. 1004
13) The driver \Driver\WudfRd failed to load for the device SWD\WPDBUSENUM\_??_USBSTOR#Disk&Ven_EPSON&Prod_Storage&Rev_1.00#7&2d369789&0&533536503532383375&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}. Error level 219
14) Name resolution for the name win8.ipv6.microsoft.com. timed out after none of the configured DNS servers responded. Error level 1014.
Now I need help with all these error since Windows 8 with maybe 15 applications is failing after no setup errors? What would cause these we need to find out? Since I can not use your product with so many developer errors? and to put out a products that doesn
work is pointless? So please call me and have some help me through the errors and tell your support to stop ignoring the errors that broke the products?
Sincerely, William Dunlap {removed} N. Academy blvd, 201, Colorado Springs, CO 80910 http:\\interfacesone.fnhost.org
{removed}. I need a tech to help me get my web server up?

So now you don't release the security breaches in windows 8. You mean to tell me that you can use Powershell - Using WMI to breach security in VB apps on the web by getting my file structures?
What is this all about?
1 Set VPN NIC Settings
    2 Get Network Data from servers
Set VPN NIC Settings
$error.clear | out-null
cls
$ErrorActionPreference = "SilentlyContinue"
if ( $Args.Count -ne 1 ) { "
Not enough arguments
Usage :
   script.ps1 server
"; exit }
$server = $Args[0].ToLower()
"We are working with $server"
$netAdapt = get-wmiobject -class Win32_NetworkAdapter -computer $server
if (!($netAdapt)) {
   "Failed to connect to the target server!"
   exit(5)
foreach ($card in $netAdapt) {
   IF (!([string]::IsNullOrEmpty($card.NetConnectionID))) {
       if ($card.NetConnectionID.CompareTo("VPN Virtual NIC") -eq 0) {
           $myID = $card.DeviceID
$NAC = [wmi]"\\$server\root\cimv2:Win32_NetworkAdapterConfiguration.index='$myid'"
$guid=$NAC.settingID
"Setting DNS Toggles"
$dnsToggle = $NAC.SetDynamicDNSRegistration(0,0)
if ($dnsToggle) {
       "Success"
   } else {
       "Failure"
$strShowNicKeyName = "SYSTEM\CurrentControlSet\Control\Network\{4D36E972-E325-11CE-BFC1-08002BE10318}\$guid\connection"
#$strShowNicKeyName
$reg = [Microsoft.Win32.RegistryKey]::OpenRemoteBaseKey('LocalMachine', $server)
$regKey= $reg.OpenSubKey("$strShowNicKeyName",$true)
$showIcon = $regKey.GetValue("ShowIcon")
if (!($showIcon -eq 1)) {
   "The icon is hidden.. Setting it now"
   $setIcon = $regKey.SetValue('ShowIcon',1,'DWORD')
   } else {
   "The icon is visible already."
"Script Ends"
Get Network Data from servers
$myfile = get-content servers.txt
echo "Server   IPs   Subnet   GW" | out-file "Results.txt" -Append
foreach ($server in $myfile) {
   Write-Host "Looking at $server"
   $colitems = Get-WmiObject win32_NetworkAdapterConfiguration -computer "$server" -Filter 'IPEnabled = "True"' | select ipaddress,ipsubnet,index,defaultipgateway
   foreach($objItem in $colItems) {
   Write-Host ""
   $myip = $objItem.IPAddress -join " "
   $mySubnet = $objItem.IPSubnet
   $myGW = $objItem.DefaultIPGateway
   $temp = $objItem.index
   $myid = Get-WmiObject win32_NetworkAdapter -computer "$server" -Filter "index = $temp" | select netconnectionid
   $myid = $myid -replace "@{netconnectionid=",""
   $myid = $myid -Replace "}",""
   echo "$server   $myip   $mySubnet   $myGW   $myid"
   echo "$server   $myip   $mySubnet   $myGW   $myid" | out-file "Results.txt" -Append
Is this possible on any machine with power shell and if so how is access done?
William Dunlap

Creating a backup of functional drive removed from broken laptop

I have a new Macbook Pro running Mountain Lion that is damaged and won't turn on. I have the drive removed and can access it using a docking station attached to my iMac running 10.6.
What is the simplest way to backup the data from this drive so that after the laptop is repaired I can return my data to the Macbook Pro?

Using Disk Utility to clone a drive will automatically erase the Destination drive if it isn't already erased. To backup to a drive with stuff already on it you would need to use a backup utility like one of these:
Suggested Backup Software
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Be sure the backup utility is NOT configured to erase all files on the destination that are not on the source. If there are files identical to those already on the drive, then they will be overwritten.

TS3989 My 5th gen ipod touch was stolen. I removed the device from my iTunes account, but their pictures still show up on the photostream on the one I purchased to replace it. How do I get this to stop, the cops have no interest in their faces, nor do I

My 5th gen iPod touh was stolen a month ago. I immediately removed that device from my account and yet today I looked at my photostream and there are tons of pics of these people on my photostream. How do I get this to stop?!?

Change your iCloud ID password: http://support.apple.com/kb/HT5624. After doing so, go to Settings>iCloud, tap Delete Account, then sign back in with the new password.

Itunes match has removed my playlists from itunes and my iphone. Not only that, many of the songs 'matched' on itunes do not show up on my iphone. Seriously annoyed, wish I'd never paid for it

Please read the title; itunes match has removed my playlists on itunes and iphone and the songs that are supposedly 'matched' on itunes are not showing up on my iphone.
Any Really annoyed about this

iTunes Match does not have the ability to remove local files.
The service operates by comparing the selected iTunes Library with the iTunes Store content and 'matching' or 'uploading' - it is very straightforward a 'match' provides equivalent access to iTunes Store content as a recognised 'purchase'; upload simply copies a 256k AAC variant into the cloud. There are no elements of this activity that can erase the local library content.
Would suggest you explore possible alternative causes of file loss. Given the pattern described of selective deletion, leaving many Songs intact - would suggest making at least 2 secure offline Song file backups and starting the library again from a fresh install of iTunes once a thorough sweep of the system has been completed for virus. It is also worth assessing the physical security of the system - who has access & with what privileges.
To access Songs from the cloud, you would have to manually delete the Song from the library or open an empty library - so even when accessing content, iTunes Match provides no local deletion capability.

Anyone know how to remove Overdrive books from my iphone that have been transferred from my computer? They do not show up on itunes. I see a lot of answers to this question but they all are based on being able to see the books in iTunes.

How do I remove Overdrive books from the library that were downloaded onto my computer then transferred to my iphone? The problem is that they do not show up in iTunes.
I see this question asked a lot when I google, but they always give answers that assumes you can find the books in iTunes either under the books tab, or the audio books tab or in the music. They do not show up anywhere for me. They do not remove from the app like the ones I downloaded directly onto my iphone.the related archived article does not answer it either. I even asked a guy working at an apple store and he could not help either. Anybody...?
Thanks!

there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

Firefox hangs on opening requiring force quit I have snow leopard mac It hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise m

Firefox hangs on opening requiring force quit I have snow leopard Mac It even hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise me
== This happened ==
Every time Firefox opened
== I tried to update firefox add-ons ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Try a new profile. See [[Recovering important data from an old profile]]

ALV . How to remove the sort buttons on toolbar in ALV report?

Hi,experts
As you know, in default case , the alv report will display two sort buttons(ascending ,descending) on its toolbar , So How to remove the sort buttons on toolbar in ALV report?
Thanks for your help .

Hi guixin,
1. Before calling REUSE_ALV_LIST_DISPLAY
2. Write this code :
data : excl type SLIS_T_EXTAB.
data : exclwa type SLIS_EXTAB.
exclwa = '&OUP'.
append exclwa to excl.
exclwa = '&ODN'.
append exclwa to excl.
3. Then while calling the FM,
pass this parameter also .
IT_EXCLUDING = excl
It will work fantastic.
regards,
amit m.

How to remove blank pages from WebI Report in view page layout option

Hi,
I am working in Business Objects XIR2 environment. I have a WebI report with several sections. I need to show the report as a book with 69 sections (each section on new page). there are 69 sections on cost center and each cost center section has almost 10 sections embedded in it. When i see in regular view - I only see 69 pages but when I try to see in "View Page Lay out" option, there is one blank page added after each results page.
Please let me know how to remove this blank page. I need to give users the option to download the book as PDF on to their machine. Now, when I download to my machine, I see one blank page after each results page.
Thanks in advance.

Jus convert your report in Page Layout mode and see if your first pafe is getting expand in the second page.
Now check if there are any cell going into second page.
- if there are any blank cell which is there after table.
you have to check formating very carefull.

DNS: reverse zone comes back after remove and some follow up issues

hello community,
after installation of OSL i had setup dns with a primary zone.
the automatically created reverse zone for my internal network is fine.
whenever i enter a new system the default for the ip address is 10.0.0.1 and the reverse zone is automatically setup for this ip address.
whenever i remove this reverse zone it come back automatically after saving the dns configuration.
with this come some follow up error.
server admin claim that there is no name server configured for this reverse zone.
when i configure it the configured name server entry vanished after clicking the save button.
when i try to configure settings i can not. i get the error message that the configuration can not be saved cause of the missing name server for the reverse zone i am not using ....
in the log file i can see that the file for reverse zone can not be found.
when i check the dns configuration in the shell i can see that the reverse zone file is not there.
someone has an idea
- whats the best way to fix this?
- why is the gui still showing the reverse zone i am not using?
- is the dns configuration also in the ldap db with wrong entries?
regards
christian

Clean out your zone definitions, and start over. Server Admin is unfortunately seemingly fussy around the authoritative server stuff and the order stuff gets entered, and it seems you can get into a sequence where it doesn't have what it needs. I had encountered couple of cases when I was in a similar state as you're in now, and I ended up clearing and deleting the primary zone and re-adding the zone and the hosts, being careful to add the authoritative server as the first step of adding a zone.

I am on windows 7 and I upgraded to 10.0.2 and now it will not open. I have removed firefox completely and uploaded it again and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version and once again nothing.

I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?

I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation.

Removing a TransformGroup?

Similar Messages

Maybe you are looking for