Removing all option in discovere desktop page item

Hi,
I want to remove the all option which appears in the oracle discovere desktop and oracle discoevere plus under the page item which you create a cross tab report.
I am creating a cross table report in that i have a date in the page item it shows the <all> option also in the drop down of the page item. I do not want it to come there . how do i remove it from that place.
Thanks

Unfortunately you can't remove the <all> option from the page-items in a cross-tab. The only solution is creating a table-layout instead.

Similar Messages

How to remove "Delegate" option from Reassign Popup page in task details

Hi
I'm using SOA 11g and Jdev 11.1.1.3 for the development. I created a Human task and using the Reassign functionality. From the BPM Worklist, When I click the Reassign in the Actions menu, a popup for Reassign task is displayed. In this popup, I have two options -
1) Reassign (transfer task to another user or group) and
2) Delegate (allow specfied user to act on my behalf)
Functionality of option 1 is working fine. But I do not want to show the option 2 in the popup page.
I tried to find the popup JSPX page and tried to find for any edit options from the BPM Worklist screen, but no luck.
Can anyone throw some light on how I can achieve this.
Thanks,
Udaya Neeliahgari

Hello,
create a new permission level. Copy the "Contribute" permission level and call it "Contribute no Delete". Edit the new permission level and untick the "Delete" box in the List Permissions section.
The next step depends on whether you want this to be site-wide or just for a particular library.
Go to the Approval Task list and click List Permissions in the List ribbon.
Select to break permission inheritance.
Then select the Sharepoint group that normally has "Contribute" permissions and change the permissions to "Contribute no Delete". To do that, tick the tick box for the group and use the ribbon command to edit permissions for the selection.
cheers, teylyn

ML removes all my account settings (desktop, itunes music, etc..) after installation.

So after installing Mountain Lion. I come onto the login screen and there are two identical profiles with my name. When I log in to one of them I expect them to have all my stuff like my desktop background all aplications in my dock and icons on my screen. But they are blank. My profile is completely reseted. I have a blank desktop with a default dock and an empty itunes. But the most peculier part is that all my files are there in the computer but they are not where they are supposed to be. There is no music in my itunes but there is all the music on the HD. Can someone please help with my issue?

iTunes - if you open iTunes and select File/Add to Library, can you add the music that is on the hard drive to iTunes?
Account problem - try booting into the Safe Mode and see if anything is different:
http://support.apple.com/kb/HT1455

Export option in discoverer viewer

Hi All,
I am using oracle 9ias discoverer and i need to remove export option from discoverer viewer page.
I made changes in ui_config.xsl and also unchecked the export data option from preferences page, but it is not reflected in my workbook. when i click on the export data link, a new page is displayed with a combo to select export format and when i click on apply button it forwards to connection page.
Can anyone please tell me why it is happening like this and how to resolve it.
Any help is appreciated.
Thanks and regards
Mukesh Harjai

I assume you are following the directions in Chapter 10 - "Customizing Discoverer Viewer" of the Oracle9iAS Discoverer Configuration Guide.
You should be able to remove the Export link.
If you are still struggling with this please log an SR/TAR to get detailed help from Support.
Discoverer Product Management

ALL option in page item

hi,
in my worksheet, some page items have <all> option (it is added automatically), but some of them haven't.
i want to determine whether to show or not on MYSELF. How can i do it?
tnx.

Hi
You're not doing anything wrong. The option <All> is added to a page item when the worksheet is a Crosstab. However, when the worksheet is a Table there is no <All> option just a list of the actual values.
I agree with you that this is very annoying and frustrating and it has been this way ever since they added the <All> option. It is something that I wish Oracle would address before adding further new functionality.
Regards
Michael

Question - any way to set a Page Item in a worksheet to default to All ?

Well, I seem to have run across an interesting situation here. I have a table worksheet with page items. I have noticed one thing while testing this new worksheet/workbook. If I pick a value for one of the page items (and with page items, it seems I can only pick one value at a time) and then save the worksheet, close the workbook, and then reopen the workbook and run the worksheet, Discoverer has retained the page item value as the value when I saved it, rather than defaulting back to <All>. So I quickly learned a new lesson with this darn Discoverer product - make sure all page items set to the <All> value before I save a worksheet that I am going to want to promote to Production.
Well, now I have run into a situation where based on the conditions I have to set in the workbook, I have a Page Item in the worksheet that today has only 1 value that pulls into the worksheet. When I do the drop down on that Page Item, it only shows the one value. It does not give me the ability to pick the <All> option. So I am unable to save the workbook with the <All> value today for that page item. There are other potential values for this Page Item that could show up in the future.
Now granted if this were to happen, the Viewer user could do the drop down on the page item at that time and pick the <All> value at that time. But alas, since they are not the owner of the workbook, they could only save as a new workbook, with themselves as the owner - cannot change the production workbook so it would be changed going forward. This also means the user has to realize that they are missing data and that the fixed page item value is the cause of that, which I am skeptical that they will be able to figure out. So I really want this page item value to default to <All> when the users open and run this worksheet.
So here is my question - does anyone know of a way to set the Page Item value to be <All> automatically when a worksheet is run?
I hope this makes some sense. Always a challenge to explain an issue well. It took me a bit to realize that when saving a worksheet/workbook, it was retaining the selected page item values when I performed the save. It is also very unusual to have a situation where a page item does not currently have multiple values. So this may be a situation that few people have run across.
John Dickey

Ah, there is a potential workaround, as I have finally figured out. The workaround does require that you have the ability to bring in multiple values for the page item from the worksheet run result set. If you have a situation, like I have, where today you only have one valid value, you will still have a problem.
The workaround is this. Figure out a way to get multiple values into the worksheet run result set. That way when you do the page item drop down list, you will see the <All> value in that list. Pick that value, refresh the worksheet, and save the workbook. Now reset your worksheet back to your desired conditions, where you end up with just one value in the worksheet result set, and refresh the worksheet. The <All> is still retained as the page item default and when you do the drop down list for the page item, you see two values in the list - your 1 valid value plus the <All> value. So once you get that <All> set as the page item default, then it will be retained. This explains how support originally tested (on an existing worksheet) and said they were able to see and pick the <All> value.
Since it should be rare for something to have just one valid value in a worksheet result set, and even rarer to have just one current valid value in Oracle, this workaround should take care of most of the situations where you might encounter this issue. I still will push for an enhancement request to have that <All> value show in the drop down list even when just one value in the worksheet result set.
John Dickey

Page item rendering location relative to report? (APEX 2.2.0)

Hi all,
What controls where the page items in a region containing a report will be rendered? I have two regions that (I thought) I set up identically, but one has the items above the report and the other below.
The only difference between them is that the one with the items above is on a non-zero page, whereas the one with the items below is on page zero.
(I cannot post my app to a public area as an example.)
Am I missing something?
Thanks!
Don

Hi all,
I apologize if I was vague or confusing. It's been a long Friday and it is continuing to be a long Friday = ) Louis-Guillaume, I tried changing one of the regions, and something very odd happened! So here's exactly what I do:
I create a region in page 0, "My Page Zero Region". It is an SQL report region. I then add "Item One" and "Item Two" to that region. The items are in the same region as the report table. I put it at the "Page Template Body (3)" display point. I then get this:
My Page Zero Region
Item One : [             ] (this is an item.)
Item Two : [             ] (this is an item.)
|            | the table |         |
|            |            |         |
|            |            |         |
---------------------------------The items are displayed above the table. I then switch the display point to "Page Template Body (2)". The region is then rendered differently.
My Page Zero Region
|            | the table |         |
|            |            |         |
|            |            |         |
Item One : [             ] (this is an item.)
Item Two : [             ] (this is an item.)It seems that APEX treats the entire region differently depending on which display point it is in. Is that the correct functionality, or should I investigate further?

"All" option in page item in Discoverer viewer

In discoverer viewer , option "All" is added along with the other entires of Page item. in the drop down . But this "All" option is available only as the last entry of the drop down . Is there any way to dispaly "All" as first entry in the Drop down ?? Please help it is urgent

Short answer - I believe no, you cannot alter the location due to it's name (ie: <All> flows to the bottom).
Long answer (great bedtime reading to help you snooze!):
In the ol' days (read Desktop actually), people regularly wanted to have the <All> option for a table (not just a xtab) and there is a way of adding <All> to a LOV via the LOV concept in the Admin edition.
When I did this in LOVs, I think I remember that what you called the <All> made a difference in the placement.
For example, I think I remember that if I added .All, then it went to the top. If I added <All> then it went to the bottom.
So it sure sounds like the LOV is alphabetically displayed no matter what you try to do and the <All> flows to the bottom - or worse - potentially someone in the list. You could also try to add the .All method to a redirected LOV, but then you'd have 2 Alls I suspect (one at the top, one at the bottom).
Russ

Remove All from Page Item

Hi!
I 've a report that does't make sense to use a date with All in the Page Item.
Can anybody tell me how can I remove <All> from the page item.
Thanks a lot,
Leila

Hi Gianluca
You are right because I did not understand. Now I do and thanks for explaining otherwise I would have continued down that path for years. :-)
Ok, what you need to do is to create a new data type within your workbook, then more than likely in conjunction with one or more analytic functions, Discoverer will create the sub-totals and totals that you want.
Here is an example that may show the principle:
You can use calculations to create new data types within your worksheet. These new types only exist within the worksheet. You can apply sorts, totals and even base other calculations on these data types.
Example Data Type:
Let’s say we want to generate a new data type called Category, and this category has three values
     High
     Middle
     Low
We want to analyze our sales and work out our top ranking customers, such that customers with:
     Sales > 9,000,000 are High
     Sales > 4,000,000 but < 9,000,000 are Middle
     Sales < 4,000,000 are Low
Basic Requirement - Syntax:
IF Sales > 9,000,000
THEN HIGH
ELSE IF Sales > 4,000,000
THEN MIDDLE
ELSE LOW
Using a CASE statement, this translates into:
CASE WHEN Sales > 9,000,000 THEN ‘High’
WHEN Sales > 4,000,000 THEN ‘Middle’
ELSE ‘Low’
END
Here's an example using DECODE:
You have been asked to create a report that combines the sizes Small and Mini into a new category called Tiny so that we report
     Large
     Medium
     Tiny – combined Small and Mini
Basic Syntax:
IF Product Size = SMALL
THEN Type = TINY
ELSE IF Product Size = MINI
THEN Type = TINY
ELSE Type = Product Size
Using a DECODE statement this translates into:
DECODE (Size, ‘SMALL’, ‘TINY’, ‘MINI’, ‘TINY’, Size)
Best wishes
Michael

Page item section option differes in Desktop and viewer

Hi Everyone.
In the Page Items section of this report. The user can choose only ONE value in Desktop but coming to the Viewer, user can select ONE value or ALL for each of the fields once the query has run.
Is there any way to hide the ALL option in the Viewer??
Thanks
--Kumar

This MAY be solved by the 6.0.4 update. See the release notes for item #2299929.
An important update to the InCopy and InDesign products has been released today!
To install the update, choose Help > Updates from any Adobe CS4 application, or navigate to the Adobe Updater and launch it:
Mac: /Applications/Utilities/Adobe Utilities/Updater6/Adobe Updater.app
Win: C:\Program Files\Common Files\Adobe\Updater6\Adobe_Updater.exe
You can also download the updates from Adobe.com at the following locations:
InCopy Mac: http://www.adobe.com/support/downloads/product.jsp?product=30&platform=Macintosh
InCopy Win: http://www.adobe.com/support/downloads/product.jsp?product=30&platform=WIndows
InDesign Mac: http://www.adobe.com/support/downloads/product.jsp?product=31&platform=Macintosh
InDesign Win: http://www.adobe.com/support/downloads/product.jsp?product=31&platform=WIndows
Release notes are here: http://www.adobe.com/go/id6_readme_en

[JS][CS4] Remove all hidden page items?

Hello,
I'm trying to remove all hidden page items regardless of how many sublayers they are burried in. Is this possible? I wrote a snippet here that seems to only partly work. It removes all hidden page items unless two hidden items exist right after each other in the stacking order. Why would this be happening? Any suggestions?
for (i=0; i<doc.pageItems.length; i++){
          if (doc.pageItems[i].hidden == true){
               doc.pageItems[i].remove();
I'm new to scripting so any help is greatly appreciated.
Thanks!
Lindsay

What happens if you go from back to front? I think something like this
#target illustrator
var idoc = app.activeDocument;
for (i = idoc.pageItems.length-1; i>=0; i--){
          if (idoc.pageItems[i].hidden == true){
               idoc.pageItems[i].remove();
Worked on a trial

Discoverer Report: Select all values for a Page Item

Hi Guys
I have created a Disco Report which has one Page Item.
It populates all columns based on values I select for Page Item that is perfectly fine.
How do I Display column values for all possible values of Page Item?
Is thera ny way I can have Option to select All possible values for Page Item?
Cheers
Vijay

Hi Vijay
Just to confirm what Rod has said, this capability to manage ALL in Page Items was introduced as part of 10.1.2 and has been maintained into 10.1.2.3 and 11g. It will not be back ported to previous releases.
Best wishes
Michael

CASE vs DECODE - CASE with SUM and All in Page Item is non aggregable

Hi,
I'm using Discoverer 9.0.4.
After switching calculations from DECODE to CASE
I found out that case gives a non aggregable result when using a Page Item and selecting <All>.
The calculations
(SUM x) / (SUM y)
or
(x SUM) / (y SUM)
where x and y are variables, work fine with page item <All>.
But for example:
CASE WHEN 1=2 THEN 1 ELSE (SUM x) / (SUM y) END
gives non-aggregable.
The same code works with DECODE:
DECODE(1,2,1,(SUM x) / (SUM y))
and is aggregable.
Does anyone know a reason or a way to make it work with CASE?
Thanks,
Joao Noronha
P.S.: I wanted <= comparisons and CASE is the best in simplicity,
but now I know I can do it with DECODE, still looking ok using LEAST instead of ABS of the difference.

Hi there
I think therefore you have answered your own question and determined that using CASE in aggregations is not a good idea. I only threw out the two CASE options as ideas not as solutions, just in case (pardon the pun) one of these worked in your situation.
Your comment I must say that if it worked it would give a wrong result (the sum of the divisions is not the same as the division of the sums) may give the wrong answer in your case but may be correct in others. It just depends how the items in the folder have been set up. I agree though that SUM(x) / SUM(y) will more often than not give the right answer.
This discussion about DECODE vs CASE has been going on ever since Oracle introduced CASE as a means of placating a younger breed of user who needed an IF..THEN...ELSE construct and could not get their minds around the intricacies of DECODE. The DECODE is a much more reliable function than CASE because it has been around for a long time allowing Oracle plenty of opportunity to iron the bugs out of it. If I get a chance I will always use a DECODE whenever aggregations are required. However, when no aggregations are in use then I'll use CASE, simply because it's easier for users to work with.
Unfortunately, users need to work with aggregations and so I don't see any alternative to Plus users having to learn DECODE. Whenever I teach Plus I always teach the users both CASE and DECODE but point out that DECODE has fewer issues that CASE. Oh, and talking of issues, try getting the THEN and ELSE components to return a different datatype. CASE has a fit and will not compile.
Best wishes and glad you got your issue solved - you did right?
Regards
Michael

All in page items

Hi,
I created a report which contain a few page item. All the drop downs (page items) have more than one value. In one page item I can select <All> for all the values but in second page item drop down list, <All> is not present :( .
Can somebody tell me how can I add <All> in the values present in the page item drop down if i want to select all the values???
Regards,
Usman

Usman,
I don't know if your situation is exactly like mine. I had a case where as a result of my worksheet conditions, I had a page item with only one value returned for it. When you only get one value returned, Discoverer does not make that "<All>" value available. I reported this to support and they dupllicated the issue and are working with development on a possible fix. In the meantime, there is a work around, if you can manage it. If you can somehow get more than one value to show up for the page item, you can then pick that <All> value. For example, I removed my conditions so that I could get multiple values for the page item. Once you pick that <All> value for the page item and save it, it will then stay available, even after reapplying your conditions to take you back to one value. Yep - surprised me to - if you can get it in there and pick it, it will stick around. So the trick is to be able to get at least one time multiple values for the page item, pick the <All>, save that selection, and you are good to go.
So you really have the issue only if there is only 1 possible page item value today. That would be a pretty rare situation to have happen, but I guess it could.
Hope this makes some sense.
John Dickey

Lost all my google desktop page and email access...again after using Trend Micro System Tuner

I ran Trend Micro Titanium Maximum Security 2013 System Tuner and lost all the info, gadgets, etc. and even my email (Gmail) access. I was left with a black, blank page. I opened up Google Chrome and everything is still in place. This happened 3 days ago. So, yesterday I ran the system tuner again again as per my own comments from last year....had sorted it out by doing it. Still nothing. This morning.....I opened Firefox (21) and surprisingly had my main desktop page but still without my email. When I tried to open the email on it's own I still got nothing....the computer seemed to try to open it, but got "stuck" and the "loading" bar that goes from left to right never appeared. I could switch to the "slower" HTML version and the mail came up but prefer standard version. Checking on Google Chrome, everything is working just fine. I believe the Firefox Version 21 had only just been updated? Perhaps that is at the core. I really prefer Firefox but will have to continue with Google Chrome until this problem perhaps sorts itself out. Since it is loading properly on Google Chrome I don't want to set everything up again. Any suggestions?

Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"

Removing all option in discovere desktop page item

Similar Messages

Maybe you are looking for