Removing assigned budget from commitment item.

Hi.
I am facing a problem with how to restructure commitment item in our R3 system. The problem is that when the commitment item has been created in our system, person responsible chose "Not Directly Postable" option though it should have been "Directly Postable". Right after that budget has been assigned to this commitment item. I went through a number of FM documents and they all say that feature "postable"/"not postable" is not changeable to begin with and on the top of that commitment item cannot be changed once it has any kind of budget assigned to it. As I understand I need to roll back assigned budget (thank God, nothing else has been done), then delete this commitment item, then create it again. I couldn't find anything that explains how to do that. There is a Tcode FMDOCREV but it reverses the whole document and this is not an option for us as by the same document budgets have been assigned to a number of commitment items and spent from them already.
To summarize my post: I need to remove assigned budget for my commitment item (the rest seems to be easy).
Please, advise.
Thank you.
Regards,
Nazim

Hi,
Maybe you can use this work around solution:
1. create a direct postable and budgetable CI
2. in BCS derivation tool, replace the old CI with the new CI when applicable
3. in FMDERIVE, add the new CI to the applicable derivation rules
4. transfer the budget from the old CI to the new CI using FMBB.
If your FM master data is year-dependent, you have the option of use back the old CI by checking the postable indicatior for the new FY.
Regards,
Ming

Similar Messages

How can i remove a LOV from the item on runtime?

dear firends
i have a problem
Ihave a tabular block.
the item "element_value' could have free writen value or sometimes reistrected values
if the value in :DETAIL.UVLS_ID is not null then a LOV is attchaed to the item"element_value" on runtime so that user select a avlaue from LOV.
this code fire on WHEN-NEW-RECORD-INSTANCE
BEGIN
:DETAIL.UVLS_ID := RSK_GET_PKG.F_GET_ELM_VLS(P_ELM_ID);
IF :DETAIL.UVLS_ID IS NOT NULL THEN
SET_ITEM_PROPERTY('DETAIL.ELEMENT_VALUE',LOV_NAME,'CG$VALUESETDETAIL');
Else
-- SET_ITEM_PROPERTY('DETAIL.ELEMENT_VALUE',LOV_NAME,'NULL');
null;
END IF;
END;
my problem is
i want to remove the LOV from the item"element_value" incase the
:DETAIL.UVLS_ID is null.
how can i do that
please help
Edited by: [email protected] on Sep 7, 2008 10:45 AM

If I understood,
You can assign a NULL lov to an item
Set_Item_Property( ..., LOV_NAME, '' ) ;
or
IF case-a THEN
Show_LOV ('A');
ELSE
< NO LOV >
END IF;
Regards

Assign a postable commitment item to the G/L account.

Hi Team,
Please write me procedure for "Assign a postable commitment item to the G/L account."
Thanks

Hi,
You have to go to FS00 transaction, enter the account and assign the commitment item ('Create/bank/interests' tab).
Regards,
Eli

How do I stop iTunes (10.7) from automatically launching upon restart? "Open at Login" is NOT checked in the dock and I have removed the app from Login Items under Users/Groups. I am using a MacBook version 10.7.5. Thank you!

How do I stop iTunes (10.7) from automatically launching upon restart? "Open at Login" is NOT checked in the dock and I have removed the app from Login Items under Users/Groups. I am using a MacBook version 10.7.5. Thank you!

Thanks for the response gakker, but I've double-checked the camera / iPhoto / Image Capture scenario, and I'm 100% positive it's got nothing to do with that.
Plugging in my iPhone has no effect on anything related to this.
The other thing I should have mentioned is that when iTunes on my Mac is NOT running, then nothing happens on my iPhone screen when I plug it in to my Mac. I only get the "Sync in progress" message when iTunes IS running.
It's interesting though that you say you also get this "Sync in progress" message, albeit only for a second or two though.
Can I just double-check something with you however... When you say:
+"at no time was my iTunes playback interrupted"+
do you mean the iTunes on your Mac? Because the problem I have is that the iPod-playback on my iPhone is interrupted.
So can you clarify that for me, please? If you have music playing on your iPhone, and you then plug your iPhone into your Mac when iTunes is running on your Mac, does the music playback on the iPhone get interrupted?

Budget and Commitment Item

Dear All,
While doing Import Procurement Budget is checking the CVD Duty also, As per as my understanding the CVD Duty account should be a B/S gl Account, but this gi account hitting as a commitment item ans cosume the budget. How it is?
Regards

Check wether the Commitment item is assinged to the CVD GL Account in FS00 and also check wether the Commitment item Assigned to CVD accoint is a statistical one or a real one.
if it was a statistical one it will never ask you for budjet. please check and confirm
Best Regards,
Ravi Reddy

Fund managment exceeding the budgeted and committed items

Dear All,
In my client place we implement the fund management. we create the department wise fund center and related committed items.
For example for the Fund center Administration Expenses- Committed item is Advertising expenses. When ever i made the payment to that particular expenses if i exceed the budgeted amount it will though error .
Like this i am getting for the some of the fund center and commitment items. I am having department wise fund center and commitment items list of 50 under that for 25 fund center whenever i exceed the budget it shows the error message for the some of the fund centers it not showing any warning message. and also allowing to make entries so my fund center report is showing negative values. so please guide to solve this issue.
Regards
girija

Dear Alex,
in my client in Availability control limit
they send for
MSL MSL001 pb selected proceed ++ Action 1 usage % 90
Msl Ms002 Action 3 usage % 100
it is correct or not pl guide to solve this issue for half of the fund center and commitment item when exceed the budget it is through error but for the remaining fund center is is accepting.
Regards,
girija
Edited by: k.r.girija devi devi on Nov 13, 2009 5:14 AM

Shared Services 11.1.2 Unable to remove assigned user from a security group

In Shared Services 11.1.2 - trying to remove a user from the assigned users list of a security group. Initially, I am able to remove the user and the assigned users total decreases by one - but when I relaunch the group properties - this user is still in there? The change does not hold. Any suggestions would be appreciated - thanks,
Paul

Hello Paul,
Not sure if this is related to yours, but it might be worth having a look at the following articles on Oracle support --
External users in EPM Shared Services (e.g. MSAD users) cannot be removed from Native groups if they have multiple IDs in the external user directory. [ID 1526569.1]
Users from External User Directories Cannot be Removed from Native Groups [ID 1272309.1]
Thanks,
hyperionEPM
Please mark answers as correct or helpful for others to find them easily.

Remove Hyper link from UWL ITems

Hi All,
How to remove Hyperlink from the UWL items list? Is that possible?
I have list of tasks in UWL and I do not want to give hyper link to the end users since they already ahve "View Detail" Button on UWL, Please help how to hide or remove hyper link?
Thanks
Krishna

In the UWL configuration, you specify the default action for a UWL item using the attribute "defaultAction".
This default action is performed when you click on the UWL item.
You can set any of the available actions as the default action for the UWL item.
As mentioned by Karri, it is usually not common to disable the hyperlink of a UWL item and make it non-clickable.
However, if you would like to achieve this, you can identify and check the UWL configuration file being used for the given UWL item and modify it as below:
<ItemType name="uwl.task.webflow.decision.TS20000999.MYUWL_SYSTEM" connector="WebFlowConnector" defaultView="yourDefaultView" defaultAction="dummyAction" executionMode="default">
<ItemTypeCriteria
Since dummyAction is something UWL doesn't recognize, the hyperlink should be disabled.
You might have to do this for all the UWL item types you use.
Thanks,
Shanti

I remove a disk from excluded items in time machine, save, and it does not remove it. Why

after the upgrade, time machine cannot use the extern disk in the backup.
It naturally excludes the external disk. I used to be able to remove the exclusion. After time machine I cannot.
The time machine preference is problematic. It shows the disk as remove, and calculated the space it will take to backup. However the save button undoes the selection,,,,, without showing that.

Thank for the link. I am fully aware of this problem. However this link does not provide a solution to my problem.
I did all the things it suggested. I went over every detail with Western Digital tech support. Once the WD software is removed. And the firmware upgraded. And formated with Apple Format, and partitioned, and GUID and and and. I can transfer files without any difficulty in all circumstances; BUT ONE AND THAT IS WORKING WITH TIME MACHINE NOT ALLOWING THE BACKUP OF THE DATA ON THE WD DRIVE.
This is a Time Machine program error. If the disk exist for all other purpose, it should exist for Time Machine. It is a error to for Time Machine preferences to reverse a user selection. It needs to be fixed.

Remove UWL Action from just one item type

I would like to remove the "forward" action from only one item type in the UWL. There is the ability to remove an action from all items in a particular iView using "List of UWL Actions to exclude", however, I can not find out how, or if it is possible to exclude a UWL action in the XML configuration file for just one item type. We are on NWO4s sp 05. Does anyone know if this can be done and what the xml snippet would look like that would remove the "forward" action from a single item type?
Regards,
Stephanie.

Kiran,
The xml snippet you sent does remove the "forward" action from the UWL preview iView, but it does not remove the action from the list view. To the right of every item in the list view is the "properties" icon (unclear on the actual name of this icon - the one that has 3 small lines and a triangle). When this is clicked the "forward" option still appears. I am looking for a way to totally disable the forward option on the defaultView, but only for certain item types.
Regards,
Stephanie.

No commitment item entered in item 00002 SCL 270303

Hi,
I had implemented Funds Management.All configuration is done.Now when im posting a FI entry system is neither giving any budget exceed message nor recognisisng Second line items Commitment .
Basically sytem is not recognising commitment items for the the GL which are assigned to Dummy commitments.
below is the error.
Help if anybody is having any input
No commitment item entered in item 00002 SCL 270303
Message no. FI311
Diagnosis
The posted document contains at least one company code in which Funds Management, Cash Budget Management, or Project Cash Management is active. Therefore you must enter a commitment item in all involved company codes.
Procedure
Enter a commitment item.
If you cannot enter a commitment item, check with your system administrator that your account assignment derivation is adjusted so that the system can automatically derive a commitment item from another account assignment, or from the G/L or cost element

Hi Deepa
Suppose when you post a document rs 5000 and you post the budget on that GL 4000, then system not post the document and give the errro Budget is exceed something.
In that case you check in SPRO -Public sector management -Fund management goverment -Actual & commitment update - integration - Active& deactive fund management
Here you check out fund management is active or deactive.If deactive then system not given the message budget exceddand not update the budget report.
2. No commitment item entered in item 00002 SCL 270303
in that case check the derivation rule Fmderiver transaction code , here you see you assign GL to commitment item
B) you go to the transaction code FMBSBO - Budget adddress - here you assign commitment item to fund center
then also go to FMBSPO - Payment address - here alos you assign the commitment item to fund center
Kindly revert in case of any query
Regards
Roobal

"Error occurred in derivation rule" & "No commitment item entered in item".

Unable to create Purchase Request (PR) and the following error message shows
"Error occurred in derivation rule. See Long Text"
Diagnosis
Fund From Commitment Item
No entry in a derivation rule was found for the specified source fields.
The derivation rule was set up that an error message appears when this happens.
The required derivation rule entry would need the following source fields:
Commitment Item
xxxxxxx
Procedure:
Create an entry in a derivation rule for these source field values. Make sure that entries exist for all the valid source field values. If the derivation should not always be carried out, you can also define rule so that no error message appears if a derivation rule entry does not exist.
Can any one help how to find out the root cause of the error and solve this issue
Regards,
GB

I was able to duplicate your error by creating the following.
I went to transaction FMDERIVE and created a derivation rule and named it "Fund From Commitment Item".
On the definition tab, I selected committment item (COMMIT_ITEM) for the source field and the target field selected (FUND).
The condition tab was left blank. NOTE: On the attribute tab I selected the option "Issue Error Warning If No Value Found).
I entered no rule values (F9) within the rule (for example such as commitment item XXXXXXX = fund YYYYY) and saved.
After creating this derivation rule, I get the same error message because there were no values in the derivation rule (the source commitment item used was not found in the rule).
If Fund is a field that is always keyed manually then I would not have such a derivation rule.
But you may have some exceptions (like we do) and in the case of exceptions you can populate the derivation rule with those exceptions... i.e. whenever commitment item XXXX is used then the fund should be equal to YYYY further using your conditions and attributes for your custom needs.

Reset Row Selection from Web Item Analysis in WAD 7.0

Hi All,
I have a Web Item Type Analysis and I use the Row Selection (SELECT_ROWS) value multiple.
Is there a way to reset the selection via a function?
The user select some rows and start a planning function via a button. If they would like to start the function for an other selection they first have to remove the old ones and have to mark the other lines.
A function to remove all selection from the item is needed!
PS: It is getting funny if there is paging and the selection is not even visible because it is on an other page.
Thanks for help.

Hello All.
I have exaclty the same problem now.
Is there any way to do this?
Thanks a lot and best regards,
Alfonso.

How update Fund Center and Commitment Item after posting

hi Experts,
Funds management was activated during the year and hence there are few open items saved without capturing Fund Center and Commitment Item. When i tried to clear these open item i get the following error
Line in document xxx xxxxxxxxxxxx does not contain any commitment items
Is there any program which i can use to update derivation to the already posted line item
Thanks in Advance

Hi,
Solutions proposed by Alexey are good if FM document was created for the FI documents in question. If, however, no FM document was created, reassignment process won't help. You can try FMN0 transaction after creating a derivation rule in FMDERIVE for these documents, but I cannot confirm that it would be sucessful as FMN0 transaction is not perfect.
The solution could be updating FI tables (BSEG/BSIS/BSAS) with FM assignment (fund centre/commitment item) and only then running FMN0 transaction. In this case, FM document will be created and you'll be able to process the items.
Regards,
Eli

Removal of ItemCycleCount from ItemWarehouseInfo

DI API 2007
Is there a way to remove a ItemCycleCount from a Items-->ItemWarehouseInfo using the DI API?
Items>ItemWarehouseInfo>ItemCycleCount
Since the ItemCycleCount object does not have a remove method, I have tried updating the Items with a xml (missing the ItemCycleCount(s) <ITW1> I want to delete) yet the missing ItemCycleCount(s) remain.
oItem = (SAPbobsCOM.Items)SAPConnect.oCompany.GetBusinessObjectFromXML(newxmlFile,0);
int theerror;
theerror = oItem.Update();
Any thoughts or is this just not possible with is DI API, once you set it to something you can only update it with is DI API.
Thanks
Ken Worst

Gordon,
I looked at the online documentation and it looks to be limited by the DI API remove method also, I don't think it is a option because the ItemCycleCount object does not have a remove method.
[/people/community.user/blog/2007/08/19/get-your-kicks-with-di-commander|/people/community.user/blog/2007/08/19/get-your-kicks-with-di-commander]
"ALL THE DATA MANIPULATION OPERATIONS DONE WITH DIC ARE EXECUTED VIA THE DI API CALLING THE Update(), Add() and Remove() METHODS PROVIDED BY THE DI API OBJECTS."
Thanks
Ken Worst

Removing assigned budget from commitment item.

Similar Messages

Maybe you are looking for