Removing menu from Flash video

I am using Dreamweaver to add a fla file to a web page. I got
the video in fine and it plays on the page just fine. I would like
to remove the menu from the video, but there is not an option in
properties to select none for the flash video menu. I also tried
changing the attirbute "&skinName=SteelExternalNoVol" to
"&skinName=none" and that made the flash video not show up.
thanks
Allen

I have left the question in the Flash forum for almost a
week, but not even a "Hey get a book and a clue"
I am posting it back in Dreamweaver to see if someone has any
ideas. Right now I just would like to loop the video. I found a
small menu that is not too obstructive.
I have used the Flash Encoder to convert some videos to FLA.
I am now using Dreamweaver, "Insert->Flash Video", to add a FLA
file to a web page. I got the video in fine and it plays on the
page just fine. I would like to remove the menu from the video, but
there is not an option in properties to select "none" for the flash
video menu. I also tried changing the attirbute
"&skinName=SteelExternalNoVol" to "&skinName=none" and that
made the flash video not show up.
I would also like to loop the video and that option is not
available in the Dreamweaver menu.
My code is
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0','widt h','375','height','250','id','FLVPlayer','src','FLVPlayer_Progressive','flashvars','&MM_Co mponentVersion=1&skinName=SteelExternalNoVol&streamName=portfolio/videos/3d_graphics&autoP lay=true&autoRewind=true','quality','high','scale','noscale','name','FLVPlayer','salign',' lt','pluginspage','http://www.macromedia.com/go/getflashplayer','movie','FLVPlayer_Progres sive','wmode','transparent'
); //end AC code
</script>
<noscript>
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
width="375" height="250" id="FLVPlayer">
<param name="movie" value="FLVPlayer_Progressive.swf"
/>
<param name="salign" value="lt" />
<param name="quality" value="high" />
<param name="wmode" value="transparent" />
<param name="scale" value="noscale" />
<param name="FlashVars"
value="&MM_ComponentVersion=1&skinName=SteelExternalNoVol&streamName=portfolio/videos/3d_ graphics&autoPlay=true&autoRewind=true"
/>
<embed src="FLVPlayer_Progressive.swf"
flashvars="&MM_ComponentVersion=1&skinName=SteelExternalNoVol&streamName=portfolio/videos /3d_graphics&autoPlay=true&autoRewind=true"
quality="high" scale="noscale" width="375" height="250"
name="FLVPlayer" salign="LT" type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>
</noscript>

Similar Messages

  • Removing menu from Flash video in Dreamweaver

    I have used the Flash Encoder to convert some videos to FLA.
    I am now using Dreamweaver, "Insert->Flash Video", to add a FLA
    file to a web page. I got the video in fine and it plays on the
    page just fine. I would like to remove the menu from the video, but
    there is not an option in properties to select "none" for the flash
    video menu. I also tried changing the attirbute
    "&skinName=SteelExternalNoVol" to "&skinName=none" and that
    made the flash video not show up.
    I would also like to loop the video and that option is not
    available in the Dreamweaver menu.
    My code is
    <script type="text/javascript">
    AC_FL_RunContent( 'codebase','
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0','widt h','375','height','250','id','FLVPlayer','src','FLVPlayer_Progressive','flashvars','&MM_Co mponentVersion=1&skinName=SteelExternalNoVol&streamName=portfolio/videos/3d_graphics&autoP lay=true&autoRewind=true','quality','high','scale','noscale','name','FLVPlayer','salign',' lt','pluginspage','http://www.macromedia.com/go/getflashplayer','movie','FLVPlayer_Progres sive','wmode','transparent'
    ); //end AC code
    </script>
    <noscript>
    <object
    classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
    http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
    width="375" height="250" id="FLVPlayer">
    <param name="movie" value="FLVPlayer_Progressive.swf"
    />
    <param name="salign" value="lt" />
    <param name="quality" value="high" />
    <param name="wmode" value="transparent" />
    <param name="scale" value="noscale" />
    <param name="FlashVars"
    value="&MM_ComponentVersion=1&skinName=SteelExternalNoVol&streamName=portfolio/videos/3d_ graphics&autoPlay=true&autoRewind=true"
    />
    <embed src="FLVPlayer_Progressive.swf"
    flashvars="&MM_ComponentVersion=1&skinName=SteelExternalNoVol&streamName=portfolio/videos /3d_graphics&autoPlay=true&autoRewind=true"
    quality="high" scale="noscale" width="375" height="250"
    name="FLVPlayer" salign="LT" type="application/x-shockwave-flash"
    pluginspage="
    http://www.macromedia.com/go/getflashplayer"
    />
    </object>
    </noscript>

    Could someone tell me if I should be able to add parameters
    to this code and get results. I have found mention of values like
    <param name="loop" value="true" />
    but when I used it nothing changed on playback.

  • Recording audio from Flash video

    I'm not sure if this is in the correct section, but . . .
    I would like to know how to record only the audio from Flash video. Specifically, there's a website my daughter loves which has Flash movies showing little animations with children's songs. I'd like to be able to get just the audio from those songs onto my MacBook so we don't have to go online to listen to them every time.
    Thanks.

    Audio HiJack http://www.rogueamoeba.com/audiohijackpro/

  • How to set jump to menu from playing video?

    I tried to set jump to menu (specific menu) from playing video. Suppose I select selection 2 number 4 then it play then I realize that I don't want to see that video I click menu and go back to same selection 2 menu. I could not get it right. Not only selection 2. If I play from selection 1 number 2 video then click menu button then it go to selection 1 menu. How do I do that?

    Select the video track and in the inspector set the remote menu button destination.
    o| TOnyTOny |o

  • Removing sound from embedded video

    I have a flash video in a slide that I would like to remove the sound for. I have an mp3 file with audio that I want to go with the video rather than the audio from the actual video. How do I remove the audio from the embedded video?
    Thanks
    Sierra

    Hi there
    There is no way I'm aware of to do this using only Captivate.
    I'm thinking you will find that the only way to do this is by using some Video Editing software. Perhaps Premiere?
    Cheers... Rick
    Click here for Adobe Certified Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • How can I remove something from a video in photoshop? Or any other Adobe CC program?

    Hi guys,
    I don't suppose anyone knows how to remove things via content aware from a video in photoshop? I'm doing a documentary and I need to edit out sign posts from hampton court to make it look more rustic and realistic but they are in hundreds of frames and I can't get them exact so it looks like the walls are moving?! Does anyone know what I could do?
    Thanks xx

    It would be easier to do in after effects, where you can track an object and have the mask follow it.

  • Wireless headset,kde and music from flash videos playback

    Merry christmass folks! Guys I`m having problems to stream audio from youtube on my headset. I suspect it is something related to kde configurations. I`ve set it as primary device in all settings I`ve found. If I do the sound test it plays properly the sounds from left and right ear. Still I can hear streams as grooveshark or youtube. It is something as the sounds from flash not being played. Still I`ve set them to max.\
    Any ideas?
    Merry Christmas!

    Hi there
    Out of curiosity, why 15 FPS? Why not leave Captivate at 30 FPS and encode the videos at the same rate? Does it reduce the size drastically or something?
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • I-movie 9 removing sound from imported video

    I cannot using any instructions I can find remove sound from an imported video.
    It was very easy in i-movie HD, but in that I could not speed up the soundless video to match a voice-over added just as easily.
    Whatever I did, the Detach Audio remained grey and unusable.
    Can anyone tell me which is supposed to be better - i-movie 9 or i-movie HD?
    WHy do they have two systems running in parallel?
    All clues welcome

    Hi
    Which I could help. Can't.
    Can anyone tell me which is supposed to be better - i-movie 9 or i-movie HD?
    Yes. iMovie 1 to HD6 and iMovie'08 & 09 are two totally different products - not related
    in any close way at all.
    iMovie'08 & 09 are Wrongly named - so that they most often are misstaken to be related.
    Yes -
    • iMovie 1 to HD6 are supperior - IF YOU use miniDV (interlaced SD-video) and aim to make a DVD
    • iMovie'08 & 09 are for material from newer HD, hard disk, memory card and mini DVD Cameras
    and are aimed for quick editing and web publishing. (DVDs will not be as good as they can)
    Yours very understanding - and whiching that I was of more help - Bengt W

  • QuickTime: Screen Recording with audio from Flash video?

    I saw a short flash video on a website that I wanted to save. SO I tried using the new QuickTime's Screen Recording feature, but no matter what options I use (Line input or Internal microphone), I get no audio.
    Is this because Flash won't allow it, or am I doing something wrong?

    just figured this out myself today. you're on right track.
    open system pref and go to SOUND - got to OUTPUT tab and choose soundflower (2ch) as your OUTPUT
    open safari and open a new window - drag SWF file into that. it should play in the browser window. hit pause on the video.
    open quicktime. go to NEW SCREEN RECORDING, and use the arrow to the right to open options. Choose sound INPUT as soundflower (2ch). do not raise the volume in the record window - keep it at lowest possible else you'll get an echo.
    you are ready to roll.
    so the browser will be outputting sound to soundflower, whilst the quicktime screenrecord gets input from soundflower. works like a charm. sounds great.
    good luck.
    keywords: convert SWF to MOV files convert flash to quicktime
    Message was edited by: California Matt

  • Removing Songs from IPOD video

    I loaded a bunch of holiday music on my iPod, but now I don't know how to remove the songs from the iPod without removing them from iTunes.

    Im assuming you have your iPod to automatically update songs because if you delete the song off of iTunes it will delete off of your iPod right? Well if you do just uncheck the songs that you dont want and then just update your iPod. The songs that you uncheck wont go on your iPod

  • How to extract closed captions from flash video player

    I would like to extract the closed captions from this video:
    http://www.whitehouse.gov/photos-and-video/video/president-obama-explains-why-health-insur ance-reform-crucial-small-business
    (Yes, it's legal, this video is in the public domain)
    Is there any way this can be done?

    Mystery solved!  As I was writing a long description of everything I've tried I came to a realization:
    1) Neither the CC nor subtitle buttons did anything on a blu-ray player, TV, or computer.
    2) None of the programs I tried were seeing a subtitle or CC track
    3) Therefore the subtitles must be hardcoded into the video
    4) But mpeg streamclip and handbrake both showed only one video track.
    5) Therefore the single video track must contain both versions of the video.
    I went back to the mpeg2 I had demuxed with mpeg streamclip and sure enough, it was twice as long as it should be.  I skimmed through it (which I hadn't done yet since I was so caught up with the subtitles) and saw the clean version and then right after, the subtitled version.  The original DVD authors must have made a script so that the buttons would only play whichever half of the video track you chose.
    If I had only double-checked the mpeg2 after demuxing it I wouldn't have wasted so many hours of my life!

  • Auto run CD menu from Flash

    Hi,
    I want to create an auto run menu for One of the
    installers.The requirement is that swf gets launched as soon as I
    insert the first CD ,but under certain conditions it'll ask for
    another cd(say 2nd CD) ...so when I take away the First CD and
    insert the 2nd CD ..the Flash menu should be running .Is it
    possible??
    If I convert the .swf to an .exe then I know it's not
    possible.Is there any other way of doing this?

    mFlexDev wrote:
    > Hi,
    > I want to create an auto run menu for One of the
    installers.The requirement is
    > that swf gets launched as soon as I insert the first CD
    ,but under certain
    > conditions it'll ask for another cd(say 2nd CD) ...so
    when I take away the
    > First CD and insert the 2nd CD ..the Flash menu should
    be running .Is it
    > possible??
    > If I convert the .swf to an .exe then I know it's not
    possible.Is there any
    > other way of doing this?
    It's possible, I did that few times for a client, tho not
    with flash itself, you need
    3rd party tools.
    You see, once you remove the CD, the flash might or might not
    run. It's very random.
    To make sure the movie runs even if the CD is not in, you
    could copy it to user drive.
    I used tool call Jugglor from www.Flashjester.com
    It allow to build custom installer and copy the presentation
    to user drive then run it
    from there. There are hundreds of other options that can help
    you customize the project
    like flash could never do. Check it out, I have been using it
    for almost 10 years and
    it was best investment ever, when comes to Flash's 3rd party
    tools.
    Take note tho, I do lots of CD based work :)
    Best Regards
    Urami
    "Never play Leap-Frog with a Unicorn."
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Remove audio from imported video

    Hi guys!
    Tried to search for this feature, but did not find anything on it.
    Is it possible to remove the audio from an imported video clip (FLV) in Captivate 5.5? I want to replace it with another recording.
    Thanks,
    Victor

    Hi,
    This is not possible inside Captivate tool. But you can achieve the same using 'Adobe Media Encoder' tool (AME) which gets installed as a part of Captivate installation.
    1. Launch AME and insert the FLV file
    2. Go to output format settings and look for "Export options"
    3. uncheck the "Audio" option
    4. Start the encoding process to get a newly encoded FLV file.
    You can use this in your Captivate projects and then add a new audio file as per your needs.
    Hope this helps.
    Regards,
    Mukul

  • Removing ads from YouTube videos on iweb

    I would like to post YouTube videos on my website, but many include pop up ads that I want to eliminate since I cannot control the content of the ads. Is there a way to disable the ads so they don't show up when you click the YouTube on my published site? Thanks for the help!

    Those are from Google adsense, which means that particular Youtube account hs been aproved for adsense ads wth there Youtube account and they cannot be removed except by Google. The viewer has the option of clicking the little X in the corner to not watch the ad.
    Alan

  • Need Help to remove flicker from DSLR Video

    Im working in Adobe Premiere Pro CS5 with a DSLR timeline.
    Im using a EOS 7D, Nikon D7000, and a T2i.
    The video was taped at an executive office and I had his two desk monitors as a background.
    The canon footage has a problem, the monitors have a banding/flicker effect on them and it is quite distracting
    I have tried using the standard anti-flicker effect (under motion effects) to no avail.
    Does anyone know how I can remove this banding, it is very crucial to the overall video and I would be willing to use a third party
    plug-in.
    Thanks in advance for any help you can provide.

    In terms of dealing with it at capture:
    True "video roll" is not a problem on LCDs, as there's no scanning beam - the display flickers all at the same time. Unfortunately with the rolling shutter in a DSLR, the sensor read order clashes with the flickering of the display leading to banding if the shutter speed doesn't match a multiple of the refresh rate. There's no cure-all solution with a prosumer camera - on something like an EX1 you can dial in whatever crazy shutter speed you want until it cures the problem - if you're filming laser displays and find you need 1/62.86, only pro gear can do it - but with DSLRs you have to pick a shutter speed from what's available, and set the monitor to refresh at a multiple of that rate. We've got it easier in the UK with PAL, as we don't have to compensate for the "crystal" values of NTSC.
    DSLRs do however have one advantage - the live view on the back of the camera shows the effect too, so you can tweak settings in real time and find the best combination.
    CRTs displaying broadcast TV are easy to deal with, as you can usually match your shutter speed with the stock options on a DSLR (1/60 for NTSC, 1/25 for PAL). CRT monitors for computer display can have a whole range of strange scan speeds depending on the model and resolution (60, 70, 80, 90 Hz), and if you can't find a match with your available shutter speeds, again change the sync refresh rate in the computer's display settings. You may still get a thin black line on the display, but from a distance it'll look OK.
    If for some reason you need to shoot 24fps and have an NTSC monitor in the shot, the trick is to keep a matched shutter speed (1/60) so you're running a non-standard 144-degree shutter angle. In the film days, Arri made special 144-degree shutters for this type of work, and you could also rent TVs converted to scan at 24fps, but it played havoc with lighting. Now you can get 144 deg with the standard settings on most DSLRs, or as said previously turn the thing off when shooting, and paint it back in post (which has the second advantage that you can mirror the footage for composition purposes without mirroring the stuff on the screen). Just remember to blur the composited screenshot or it'll look fake.

Maybe you are looking for

  • Problem with Wine, NVidia and fullscreen games

    Hi, I'm writing about a problem i recently noticed with wine, nvidia gpu and fullscreen 2d games.Basically the problem is as follows - i am running arch with the latest kernel and nvidia drivers on Thinkpad T61 with NVidia Quadro NVS 140M. I have a p

  • Row to Column in 10g

    Hello All, I have a requirement where I have to convert rows to columns and vice versa in 10g. Pivot isn't supported in 10g. Actual query looks like this change_name    primary_key_id ASSET              1501  COLLATERAL         1501 ASSET            

  • Quicktime not working properly on Mountain Lion

    I recently tried to open an client's AE project on my MACPRO (late 2010, running on Mountain Lion) and everything seemed to be offline, after digging in my client's portable drive, I found all the media but could not reconnect it to the project. AE k

  • Cant Broadcast message to all users from sm02

    HI we have a Nw04s machine with Windows 2003OS installed on it and i am not able to send the message from Sm02. When i open the tcode sm02 and whn i click create message i can see "system message text server name,client ,language then i create and cl

  • Patch set level for financial family

    Hai All I have some confusion regrding family & module. These are quries 1) what is the difference between a family and a module. 2) what are the different families and modules present & how to find out them in oracle applications. 3) How can we find