Removing the ink cartridges from my pixma mg3220

What is the trick to removing the black ink cartridge so that I can repace it?

Hi careyking33,
Please follow the steps located here to change the ink cartridges in the printer.
This didn't answer your question or issue? Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Remove the ink cartridge & reinstall it then press ok - Doesn't Work. Please Help !

HP Envy 5660 Wireless All-In-One
My black & color ink ran out and I changed them both. The color ink cartridge is fine but when I changed the black cartridge I get a message telling me to remove it and reinstall the black ink cartridge then press ok. I tried this several times. When it did not work after 4 tries, I decided to try another black cartridge. Again I got this message. I tried with 3 brand new black cartridges with no luck.
I then decided to turn off the power to the printer and unplug the printer. Wait a few minutes then plug it in again and power up. Like a re-boot. This did not help. I then tried cleaning the area where the cartridge goes in but this did not help either. I did not bother trying to clean the cartridges (3) themselves as they were all brand new, just out of the box.
The only way I can use this printer right now was to remove the black cartridge all together and only use the color ink.
I have only had this computer for 3 months so if anyone has any ideas it would be greatly appreciated. Thank you in advance.

Hi @TracieDawn,
I see that despite your best efforts so far, you can currently only use the printer when you remove the black cartridge and printer with the color ink. I suggest using the following document to troubleshooting the issue, and calling us if the issue persists; HP ENVY 5640, 5660, 7640 and Officejet 5740, 8040 e-All-in-One Printer Series - A 'Cartridges Missin....
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I have a C5580 AND a C5280...and can't remove ink cartridges from either of them.

I can't remove the ink cartridges in either printer. It looks like the little flat plastic plate that sits directly in front of the installed cartridges, is sitting too high and blocks the inks from being removed. I think the plastic plate should probably be lowering itself automatically, when the cartridges move to the right and stop for easy removal...right? How can I fix that?
This question was solved.
View Solution.

OK, sorry I could not help.
The service station is the assembly on the right, the capping station and plate that block access to the cartridges are all part of that mechanism. If the plate is not moving out of the way the service station mechanism is not operating properly.
Similarily, if there is a carriage jam message it is an indication that the carriage is not moving correctly, or that the sensor that detects carriage movement is not operating. In the latter case the carriage would likely slam to the edge of the printer, that seems to not be the case so it is likely related to a blocked movement of the carriage. This may be caused by a blocked service station.
At any rate, I will not waste your time with any further discussion in this thread.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How do I tak out the ink cartridge on HP Officejet Pro 8600?

Need to remove my ink cartridge to buy a set backup. How do you remove the old cartridge?

The HP Office Pro 8600 series consists of 3 model variations. I have the Plus version. All functions similiar.
With the power 'ON', grip the side of the front panel (left handed) just below the HP logo. The entire panel will swing down. The ink cartridge bay will move from the right to the left. Push on the cartridge, and it will pop-out.
Manual, see pg 13 and 92. WARNING per HP: Never turn off the printer when ink cartridges are missing.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

How do I remove the print head in a PIXMA MX922 printer so I can clean or replace it?

How do I remove the print head in a PIXMA MX922 printer so I can clean or replace it? The printer clean and deep clean features will not provide print quality corrections.

Hi Happy,
To remove the ink tanks and print head from the printer, please follow the steps located here. Please note that we do not recommend cleaning the print head using any other methods other than the ones built into the printer, as it may do damage to the printer. If performing at least one cleaning and two deep cleanings on the printer do not resolve the issue, the printer may require servicing; please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do i install the ink cartridges in photosmart 7520

how do i install the ink cartridges in photosmart 7520

Hi,
Please check from page #42 of the following manual:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c03456524/c03456524.pdf
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP6520 How can I use a new, but protected, 564 XL ink cartridge from my broken 6510 printer.

My 6510 failed after just over one year of use. I salvaged a brand new 564XL ink cartridge to use in my new 6520. Message says - HP protected cartridge installed. Replace Cartridge.
I have three more new cartridges from the 6510, color, that likely will have the same problem when I install them. How can I get them to work in my 6520.

Hi tsuribaka,
Welcome to the HP Forums! I understand that you are trying to use the HP 564 XL ink cartridge, from your broken HP Photosmart 6510 with your new HP Photosmart 6520. I am happy to help you with this issue!
In order to use those old cartridges, you must first use the setup cartridges that came with the new printer, in order for it to initialize. Once you put in those old cartridges the setup cartridges will become unusable. I recommended using up the setup cartridges first, then use the old cartridges that you have.
Make sure to store the old cartridges, in an air-tight container, such as a zip-lock bag, or a Tupperware container. In a cool, dry place.
Hope this information helps you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How can we remove the following zeros from quantity field ?

Hi All.
how can we remove the following zeros from quantity field while populating ALV by using FM REUSE_ALV_GRID_DISPLAY ?
eg:getting output zqty = 2.000
but i need           zqty = 2.
help me to reslove this issue.
Regards.
jay

Hi,
While populating the field catlog do the following thing to   avoid zeros.
wa_fieldcat-tabname = 'I_OUTPUT'.    " Curr
wa_fieldcat-fieldname = 'FWAER'.
wa_fieldcat-seltext_l = text-023.
wa_fieldcat-no_zero = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Thanks,
Khushbu.

My MacBook Air 13' (2013) will occasionally start the fan at full blast, not connect to any wifi or detect any wifi, and will remove the battery icon from my menu bad as well as tell me there is no battery connected. How do I fix this?

My MacBook Air 13' (2013) will occasionally start the fan at full blast, not connect to any wifi or detect any wifi, and will remove the battery icon from my menu bad as well as tell me there is no battery connected. How do I fix this? I have restarted my computer multiple times, **** it down, and ran a diagnostic test to tell me nothing is wrong and my computer is not running any applications. There is no reason for the fan to be on full blast! when I try to set the option to show my battery icon in the menu bar, it will automatically uncheck. How do I fix all of this?

Have you tried SMC and PRAM resets?
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao.

Removing the business area from the WBS element

Hi Experts,
I have created the WBS element with business area. Then created the PR against that WBS element , converted the PR's to PO's.
Now I want to remove the business area from WBS element.
Now as Business area field become grayed out hence I canot remove the Business area from WBS element.
Hence I have cancelled the PO's then Cancelled the PR's. So now there is no actual cost & no commitment exists against the WBS element.
But still Business area field is grayed out for that WBS element.
Could you please let me know how to remove the business area in this case ???
Regards,
Pradip

Hi,
Once BA is grayed out then you can not change the same, this is sap std. behavior. Here you can lock the existing wbse which having wrong BA to avoid further actual postings.
Create new wbse with correct BA & then create pr & po.
Regards,
Sandeep

I had an iphone. I have a new iphone and no longer use the old one. How to do remove the old one from my icloud account?

I had an iphone 4 on Sprint. I switched to Verizon and purchased a 5S. Kept the same phone number and affiliated the new phone to my existing icloud ID. How do I remove the old device from my icloud ID?

and this if not already done
iCloud: Remove your device from Find My iPhone

HT3702 how can i remove the authorization hold from my card...

how can i remove the authorization hold from my card

You can try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store
How much was the amount ? A 'normal' holding charge is a small amount (e.g. equivalent to about $1), and usually happens after you add or change credit card details on your account. Here in the UK it can take a few working days for it to disappear (so a weekend can extend the elapsed time).
Edit : I don't know what a non-liability certificate is and/or whether Apple can do one.

Can we remove the Continue button from Quiz Results?

Hi Everyone,
Is there any way to remove the continue button from the Quiz Results page?
I have a captivate file in which there is a Thank you slide at the end after the Quiz results slide. Now, here's the problem - The user is just finishing the quiz and closing the browser tab - which is not showing the completion status inside LMS. The user must need to view the Thank you slide - so that the LMS can respond as "Completed" status.
Now, I want to remove the Continue button on Quizzes result slide so that user doesnot need to go ahead to next slide to complete the course. And i will put the Thank You message here in Quizzes result slide only.
Can I remove the continue button from the Quiz Results page so that it can be the last slide?
Regards
Vikas Sharma

Removing the Continue button from the Quiz Results slide is NOT a good idea in my experience. Clicking the Continue button triggers functions in Captivate to terminate the quiz and commit the score to the LMS. If this button is not clicked, Captivate may not be sure the person has decided they're done with the quiz and wants their score to be captured by the LMS at that point. There are often other buttons on the Quiz Results slide to offer the user the option of Retaking or Reviewing the Quiz. Only the Continue button is designed to take them further beyond the Quiz Result slide.
Like yourself, I have also found learners often fail to grasp the importance of the Continue button and don't realise they need to do something extra (beyond reaching the Quiz Results slide) in order for their score to be captured. So what I usually do is rename the Continue button to something more meaningful such as: Register Your Score, or Record Quiz Results Now. Having a name like this (and making the button nice and large and bold so that it's not easy to miss) clearly tells people that they need to click this button if they want their score to be retained. It's just a simple change, but it practically eliminated all issues we had with people just closing down their browser when they saw the Quiz Results.

How to remove the credit card from the Apple id?

how to remove the credit card from the Apple id?
plz ITS urgently

If the option to select "None" isn't appearing when you attempt to edit your payment information, then there is likely a billing issue with your last iTunes Store purchase(iTunes didn't receive payment from your credit card company for that order). Before you can remove your credit card, you have to pay for the unpaid order. You can call your credit card company and troubleshoot the billing issue with them, or try another card, or if you live in a country that supports iTunes Gift Cards, you can redeem one of those to pay for the order. Once you have done that, you should be able to remove your credit card info as outlined in http://support.apple.com/kb/ht1918

I just installed Firefox 5. How can I remove the Bing search from the address bar? I don't want to see Bing at all.

I just installed Firefox 5. How can I remove the Bing search from the address bar. I don't want to see Bing at all. I tired the Firefox options, right-clicking on the search field and the toolbar selection drop-down but could not find a way to get rid of that unwanted search window.

*'''at the bottom of firefox''' there is a weird looking greenish circle with a lightning bolt in it*
1. click it and hover over to '''PREFERENCES'''.
2. click the second circle that say's '''BING.'''
3. '''Un-check''' both boxes.
4. you're done :)
Note: it's not going to show the google symbol encrypt when you open a new tab it's just going to automatically use google as a search engine.

Removing the ink cartridges from my pixma mg3220

Similar Messages

Maybe you are looking for