Rename of Business systems and channels in PRD system

Hi all,
I am doing a rework of some scenarios in PI. I will rename business systems and channels.
When we move the new objects to Prduction and activate what is the best order to stop processing in PI before the switch over.
Is it
1)Stop PI inbound queues.(Deregister queues)
2)Check all outbound queues are empty.
3)Stop outbound queus (Deregister queues)
4)Stop all channels
5)Import all new objects
6)Delete old configuration and business systems and channels.
7)Activate all new configuration.
8)Activate all channels.
9)Register all queues.
10)Check all sender systems for failed (eg Outbound IDoc) and resend.
Have i missed anything?
What is the best way to handle sender for the following adapter types(HTTP , Proxy, RFC, SOAP)
Thank you for your input.

Hello,
The following note provides details on this procedure:
#870864 Starting and Stopping an XI 3.0 / PI 7.0 System
For 7.1:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/12/5dd23aaad7b3408dde3c1577fda5b3/content.htm
Kind regards,
Sarah

Similar Messages

Is it possible to chenage logical system and how after a system is beeing u

Hello
I wander is it possible to chenage logical system and how after a system is beeing used for a while and how?

Hello Tina,
If the system is NOT a production system transaction BDLS can be used to change the logical system. This would be necessary after refreshing a dev system from a production system, for example.
If the system is a production system, I would agree that this is NOT advisable.
Regards
Greg Kern

Administration differences between an As Java system and an As ABAP system?

Hi, I'm not that familiar with SAP systems that are As Java based only, so apologies in advance if I ask real stupid questions here!!
Can someone please explain how one logs onto an As Java only system?... ie without the ABAP stack does one still use the SAP logon pad or am I getting confused here totally???
Also how does one do transports in an As Java system?
If you could send me a document that explains the main differences between an As ABAP system and an As Java system, particularly the differences in administrating these systems that would be very useful. My email address is [email protected]
Many thanks
Ash

Hi,
Can someone please explain how one logs onto an As Java only system?.
You can login through browser, use NetWeaver Administrator for most of your activities. There is also Visual Administrator/ Config tool etc these have seperate GUIs.
It would not be easy to list out the options but i suggest you read understand info from help regarding the details below so that you can administer Java servers:
Visual Administrator
NetWeaver Administrator
Config tool.
SDM
With the knowledge of the tools above you can start of administrating Java servers.
Also how does one do transports in an As Java system?
You install Portal on Java server and then do transports. You should be having a system administration role.
Please do a search in help.sap.com and you will find loads of data on WEBAS Java administration.
Thanks & regards,
Vijith

References: Appearance different in Development System and in Run Time System

I noticed a difference the references appearance in Development System and in Run Time System. It seems to have no effect in the executable version but, per curiosity, someone have an explanation?
Development System
Run Time System
Jean-Marc
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp
Solved!
Go to Solution.

tst wrote:
When LabVIEW builds an executable, it removes the parts which are not needed from the VIs (like BDs, or FPs of VIs which will not be opened). I'm assuming this is an extension of that where the icon is not copied over. Another option is that the RTE is simply missing the code necessary to display this specific this.
In any case, I would say it's a bug, albeit a minor one.
I don't think this is a bug, the references refere to a given CTL file, which is not present in the RTE, I think LabVIEW disconnects the reference form the typedef and only saves the properties needed.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Why are the Creative Cloud system and the Adobe Support system so expensive and so gawdawful lousy?

Why are the Creative Cloud system and the Adobe Support system so expensive and so gawdawful lousy?

Free market at work in a gullible or irrational population.

SAP Cloud Application Studio Create Custom Web Service From Custom Business Object and Consume in External System

Hi Experts,
I have requirement to create custom business object and create Web Service for that and use in external system (SAP ECC / SAP CRM / Third Party).
1) Is it possible to create custom object web service and used in external system ?
2) When we create the Web service from custom business object what the necessary steps(action : Create , Read , Update) require?
3) Sample Scenario :
My Custom Business Object
businessobject Custom_Integration {
element EP_VAL1 : LANGUAGEINDEPENDENT_MEDIUM_Text;
element EP_VAL2 : LANGUAGEINDEPENDENT_MEDIUM_Text;
element IP_RES : LANGUAGEINDEPENDENT_MEDIUM_Text;
I have created the Web Service using this custom business object.
3) How i can use this web service in external system? what are the prerequisite steps in external system to consume this service in it?
Please anyone have idea about this how to do this and how to achieve this using SDK and custom business object.
Many Thanks
Mithun

Hello Mithun,
Does this section in the documentation help you:
SAP Cloud Applications Studio Help -> Developers Desktop -> Web Services
The entry "Task -> Create a Web Service" describes how to create a Web Service on your own BO
The entry "Task -> Test a Web Service" helps you how you can use it in a foreign tool / application.
HTH,
Horst

SPAU: difference in development and on QA/PRD system

Question from Customer:
After Release upgrade and SP-application we have completed the SPAU on the development system and after Upgrade/SPAM application of QA/PRD system we have imported the SPAU request into the QA/PRD,
but after the import there were not adjusted objects in the worklist of SPAU.
How can this happen.
Kind regards
Laszlo

This situation can happen, if the DEV and QA/PRD are not identical, if there are different modifications in QA/PRD then in DEV.
You can remote compare the involved objects in version management between DEV and QA and
you can check also the SPAU request, if the objects were included or not.
I suppose, that on the QA and PRD there is no difference, because the PRD will be copied to QA regulary.
Best regards
Laszlo

Data extract/convert from SAP system and load to Unix system - Urgent

Hi,
I have a requirement that I need to extract data from SAP and each data field will have some conditions and need to map/Load it to the Legacy Unix system.
there are four kinds of data objects of HR system, need to extract them individually and map those into Unix system.
Can anyone please suggest me step-by-step how to go about it....like
do we need to write a report for that?
do we need to use Function modules? etc.,
How to set mappings of that Data to a file?
How to map that file to Unix system?
Need to run those on daily basis and after first run, only changed data file need to be loaded. how to do this?
thanks
Alankaar
rewarded with the points.

Hi
I can't say this becouse I don't the problem, anyway u have to do it by yourself.
U should create:
- a document where u define the file format: data type, size and name of the field of the unix system;
- a document for the mapping: link between SAP fields and Unix system fields
Based on these document you'll create a structure on the report:
DATA: BEGIN OF STR_UNIX_SYSTEM,
             FIELD1 ...,
             FIELD2 ...,
             FIELDN....,
           END OF STR_UNIX_SYSTEM.
and the code to transfer the data from SAP to legacy:
MOVE: <SAP TABLE>-FIELD TO STR_UNIX_SYSTEM-FIELD1,
So all steps have to be defined in the report before downloading the file.
So I don't know which legacy system you're speaking about, after creating the file the legacy should read it in order to upload the data.
U can create a daily job for that report, if you need to transfer the changed data only you should read the change document table (CDHDR and CDPOS) but I don't know HR so I'm not sure these tables are available for HR.
Max

SAP ERP 6 system and compatibility with BW systems.

Hi All,
An upgrade to a ECC 6.0 system form 4.6C or 4.7 system is fine. But however, in an integrated environment - the 4.6C system is usually integrated with other SAP Products as well.
The question I have is is a ECC 6.0 system compatible with BW 3.5 or lower versions of BW - i.e. when I upgrade my system to an ECC 6.0 system can these systems still talk in between themselves, or I have to plan a upgrade for this?
If the answer is yes - is it mentioned in any SAP Note/ Website or Document as because I also need an artifact to support the answer.
Thanks, Dibya

Hi Dibya
the component lists (from service.sap.com/scl) document for each release, which product instance is needed for which process (i.e. ECC and NW - BI). This source includes information about old releases as well, but not about mixtures between releases.
In the Upgrade Dependency Analyser will you find information about these mixtures (see for instance: SAP Network Blog: New Tool for Planning Your Upgrade: The Upgrade Dependency Analyzer : New Tool for Planning Your Upgrade: The Upgrade Dependency Analyzer)
regards,
Andreas R

Re: Data Exatraction form R/3 - One BW system and Multi R/3 systems

Hi Experts,
In my current project there is a requirement to bring data from two different R/3 clients(systems) into one BW sytem.
The inforsouce is the same. For example The FI GL data needs to upload into BW through the Infosource 0FI_GL_4 from two different R/3 clients ; 100 and 150. Is it possible?
Curreny set up is to bring data only from R/3 system 100. Now the requirement change and have to bring data from R/3 system 150. This is the situation in production client.
Please advise and share your view.
Thanks in advance

It is possible.
You have different logical system name in different R/3 system (or client), in the infosource you should add logical system infoobject.
By this way even you loaded data from multi R/3 system into single data store (eg. same InfoCube), you are still able to distinguish the source of the data by using logical sysetm infoobject.
You should find in the BI content, many of them had the logical system infoobject already.

Contact info to reset activation for old version of Dreamweaver CS3. I deactivated old installation from another system and installed on new system but will not launch to allow reactivation.

Does phone support exist? Customer service? The airspeed velocity of an un-laiden Swallow?

Thanks everybody… I killed the process again in Task manager after trying compatibility modes… noticed something glaring at me as I killed the process. 32 bit. Old workstation on Win7 that was working was 32 bit and the Win8.1 is (drumroll please) 64 bit. MY guess is that if Adobe killed the ability for this to run it would have failed upon an attempt to activate, not upon launch. I think Nancy might have hit it on the head. Let me stew on this for a bit if I really want to pay more for features I already paid for once.
Mark J Laurence, MCSE, CET
Electrical Designer / Network Administrator
Marquess & Associates, Inc

ChaRM transport route, one development, 2 QA, 2 PRD system landscape

Hello,
We have a customer who has an ERP system with a transport route which is the following:
One single Development system which feeds, 2 QA systems and then 2 PRD systems.
We are to implement ChaRM and we want to customize the tickets so that every time you execute the import action of a transport request into QA (and later into PRD) both systems QA1 and QA2 are updated and later on with PR1 and PR2.
We would like to know how to support this scenario in Solution Manager using ChaRM. How do we set up the logical component at SAP, how we define the transport route and layers, and how we define the actions in the SDHF ticket.
I appreciate your help.
Regards
Esteban

Hello,
We set up a testing environment for change request management. In a solution manager we created five clients. One single development which feeds two quality systems, and final two production system. As it was said in the thread we used transport groups in the transport route. The development system feeds this transport group which feed to import queus in quality systems. We tested this transport route and transports worked well and arrives into both production 1 and production 2 systems.
Then created a logical component for that landscape, with five sytems. Then we created a maintenance project using that logical component. We created a maintenance cycle and then a task list was created which shows two delivery system, and the two productive systems. All the groups have the right actions.
However when we created a SDHF correction the system creates the task list only for 3 systems, not for the five of them.
we see that only action groups are created for development, quality 1, and production 1. No entries for quality 2 and production 2
We try to run the action which is in the general part of the task list to execute the import in multiple systems, it cames out with the correct selection of importing in quality 2 system because it is the transport group. However an error is raised saying that the actions for quality 2 are not there in the task list which is true. Finally, as short term solution, we were able to import into quality 2 and later on pr1 but done manually in the stms transactions which is not what we want to do.
Regards
Esteban Hartzstein
Edited by: Esteban Hartzstein on Aug 24, 2010 2:06 AM
Edited by: Esteban Hartzstein on Aug 24, 2010 2:07 AM

Trusted RFC: "jumping to PRD system from DEV via SOLMAN"

Hallo!
I have the following question regarding the Trusted RFC generally in SOLMAN area and better especially within ChaRM.
We have SOLMAN and 3 satellite systems DEV, QAS and PRD.
When we generate Trusted RFC connections from SOLMAN to these satellite systems, we become scared about the following scenario:
A user accesses to DEV system and goes via Trusted RFC to SOLMAN.
From SOLMAN he chooses the Trusted RFC to PRD system and goes into PRD system.
The question:
How can this identification gap/problem be solved?
Thank you very much indeed!
H. Thomasson

Hi Thomasson,
You can restrict the access of your solman system from your DEV system.
Disable the trusted relationship in the RFC that points to Solman from Dev system.
Hope this helps.
Regards,
Kiran.

Trusted RFC: "jumping to PRD system from DEV"

Hallo!
I have the following question regarding the Trusted RFC generally in SOLMAN area and better especially within ChaRM.
We have SOLMAN and 3 satellite systems DEV, QAS and PRD.
When we generate Trusted RFC connections from SOLMAN to these satellite systems, we become scared about the following scenario:
A user accesses to DEV system and goes via Trusted RFC to SOLMAN.
From SOLMAN he chooses the Trusted RFC to PRD system and goes into PRD system.
The question:
How can this identification gap/problem be solved?
Thank you very much indeed!
H. Thomasson

Holger,
First of all the user that tries to launch the TRUSTED RFC needs to have an active user in the satellite system he/she tries to reach.
Secondly, this user needs to have the authorization object S_RFCACL assigned to its user.
You can manually change this TRUSTED RFC to 'Logon Screen' if you like.
Roel

Differentiate b/w Technical System, Business System and Business Service

Hi all,
I'm new to XI. I was asked two questions. Any one answer the following, plzz.
a) Difference between Business System and Business Service
b) Difference between Technical System and Business System

Hello Gopi,
a) Business System is a logical representation of a Technical System.
Business Service is a abstract representation of a System. For instance, www.google.com have a several system working together and IPs of this machines change eventually. When we use a Business Services like google we reference a computer that we don't know the phisical implementation.
b) Technical system is a phisical machine, it have a IP. Can be a BBDD, ERP, J2EE ......... a Business System is a logical term that we use into the Business Scenarios and represent these Technical System that we had created.
Hope it's help you
Best Regards
Iván Prieto

Rename of Business systems and channels in PRD system

Similar Messages

Maybe you are looking for