Rendering selective data using checkbox in ssrs report.

Hi,
I am stuck in a scenario, I have a report which consists many spark line chart and I want to export selective chart among available chart on screen. for that I want to add a check box at the starting of rows and what I want that user should check selective
check box and get checked graph in export ( PDF, EXCEL).
Regards,
Munesh Kumar 

For example, let us say we have two charts "chart1" and "chart2". Add a parameter whose datatype is text and checked the option "Allow multiple values".
Set the available values by adding two values "chart1" and "chart2". After this go to the chart1 property and set the
visibility expression(Hidden property) as,
=IIF(InStr(Join(Parameters!ExportWhat.Value,","),"Chart1") , false,true)
Similarly, go to chart2 property and set the visibility expression as,
=IIF(InStr(Join(Parameters!ExportWhat.Value,","),"Chart2") , false,true)
When we select "chart1" as parameter it will display or export only chart1, similarly for chart2. If we need both then checked both the chart from the parameter dropdown box.
Regards, RSingh

Similar Messages

  • Reading the record and displaying when u select it using checkbox

    hi,
           how to read the particilar record and display it in a popup screen when u select it using checkbox and then press 'DISP' button in alv(normal alv not with oops concepts).
    like i select a row which is checked (checkbox) it and i have to read that particular record and display (value of keyfield say vbeln) details in a popup screen.

    hi,
    go through the faloowing code.
    this for normal popup.
    *& Report  ZGS_ALV_POPUP_2_SELECT
    REPORT  ZGS_ALV_POPUP_2_SELECT.
    TYPE-POOLS: slis.
    PARAMETERS: p_title TYPE sy-title default 'Sales Document:item data'.
    DATA: itab TYPE vbap OCCURS 0 WITH HEADER LINE,
          selfield TYPE slis_selfield.
    START-OF-SELECTION.
      SELECT *
        FROM vbap
        INTO TABLE itab
        UP TO 20 ROWS.
      CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
           EXPORTING
                i_title                 = p_title
    *           I_SELECTION             = 'X'
               I_ZEBRA                 = 'X '
    *           I_SCREEN_START_COLUMN   = 0
    *           I_SCREEN_START_LINE     = 0
    *           I_SCREEN_END_COLUMN     = 0
    *           I_SCREEN_END_LINE       = 0
    *           I_CHECKBOX_FIELDNAME    =
    *           I_LINEMARK_FIELDNAME    =
    *           I_SCROLL_TO_SEL_LINE    = 'X'
                i_tabname               = 'ITAB'
                i_structure_name        = 'VBAP'
    *           IT_FIELDCAT             =
    *           IT_EXCLUDING            =
    *           I_CALLBACK_PROGRAM      =
    *           I_CALLBACK_USER_COMMAND =
    *            is_private              =
         IMPORTING
                es_selfield             = selfield
    *            e_exit                  =
           TABLES
                t_outtab                = itab
           EXCEPTIONS
                program_error           = 1
                OTHERS                  = 2.
      IF sy-subrc <> 0.
        MESSAGE i000(8I) WITH sy-subrc.
      ENDIF.
      WRITE:
             /  'Table Index : ', 20 selfield-tabindex,
            /  'Table Name  : ', 15 selfield-tabname,
            /  'Field Name  : ', 15 selfield-fieldname,
            /  'Table-Field : ', 15 selfield-sel_tab_field,
            /  'Field Value : ', 15 selfield-value.
    the falowing code is for how to put checkbox and how to display the selected recods.you combine both codes.
    *& Report  ZRP_SALES
    REPORT  ZRP_SALES NO STANDARD PAGE HEADING.
    DATA: TEMP_DATE_STR TYPE STRING.
    *DATA: TEMP_NETP LIKE VBAK-NETWR.
    DATA: TEMP_NETWR(10).
    *DATA: TEMP_VBELN LIKE VBAK-VBELN.
    DATA: CHECK TYPE C VALUE ' '.
    *DATA: WA_VBELN LIKE VBAK-VBELN.
    DATA: TEMP_DATE LIKE VBAK-ERDAT.
    *DATA: TEMP_NETP_STR TYPE STRING.
    DATA:FNAM(20), FVAL(20).
    TYPES: BEGIN OF MY_VBAK,
           VTWEG TYPE VTWEG,
           VKORG TYPE VKORG,
           SPART TYPE SPART,
           NETWR TYPE NETWR_AK,
           VBELN TYPE VBELN_VA,
           ERDAT TYPE ERDAT,
           END OF MY_VBAK.
    DATA: IT_VBAK TYPE MY_VBAK OCCURS 0 WITH HEADER LINE.
    DATA: WA_VBAK TYPE MY_VBAK.
    DATA: V_VBELN TYPE VBELN,
          V_ERDAT TYPE ERDAT.
    SELECT-OPTIONS:S_VBELN FOR V_VBELN,
                   S_ERDAT FOR V_ERDAT.
    AT SELECTION-SCREEN.
    *Check for Sales Order number to be non-initial.
      IF  S_VBELN IS INITIAL.
    *Checking for Date to be non-nitial.
        IF  S_ERDAT IS INITIAL.
          MESSAGE E003(ZRP_MSG). " Please enter either SO number or Date.
        ELSE.
    *Validating the right low values for Date select option
          SELECT SINGLE ERDAT
                 FROM VBAK INTO TEMP_DATE
                 WHERE VBELN EQ S_VBELN-LOW OR ERDAT EQ S_ERDAT-LOW.
          IF SY-SUBRC NE 0.
            MESSAGE E004(ZRP_MSG).
          ENDIF.
    *Validating the right high values for Date select option
          SELECT SINGLE ERDAT
                  FROM VBAK INTO TEMP_DATE
                  WHERE ERDAT EQ S_ERDAT-HIGH OR VBELN EQ S_VBELN-HIGH.
          IF SY-SUBRC NE 0.
            MESSAGE E005(ZRP_MSG).
          ENDIF.
        ENDIF.
      ELSE.
    *Checking for Date to be non-nitial.
        IF  S_ERDAT IS NOT INITIAL.
          MESSAGE E003(ZRP_MSG). " Please enter either SO number or Date.
        ENDIF.
    *Validating the right low values
        SELECT SINGLE VBELN
               FROM VBAK INTO S_VBELN
               WHERE VBELN EQ S_VBELN-LOW.
        IF SY-SUBRC NE 0.
          MESSAGE E001(ZRP_MSG).
        ENDIF.
    *Validating the right high values
        IF S_VBELN-HIGH IS NOT INITIAL.
          SELECT SINGLE VBELN
                  FROM VBAK INTO S_VBELN
                  WHERE VBELN EQ S_VBELN-HIGH.
          IF SY-SUBRC NE 0.
            MESSAGE E002(ZRP_MSG).
          ENDIF.
        ENDIF.
      ENDIF.
    START-OF-SELECTION.
    *First Screen.
      SET PF-STATUS 'DISP'.
      IF S_VBELN IS NOT INITIAL.
        SELECT   VTWEG VKORG SPART NETWR VBELN ERDAT
               FROM VBAK
               INTO TABLE IT_VBAK
               WHERE VBELN IN S_VBELN.
      ENDIF.
      IF S_ERDAT IS NOT INITIAL.
        SELECT  VTWEG VKORG SPART NETWR VBELN ERDAT
               FROM VBAK
               INTO TABLE IT_VBAK
               WHERE ERDAT IN S_ERDAT.
      ENDIF.
      SORT IT_VBAK BY VKORG VTWEG SPART.
    END-OF-SELECTION.
      LOOP AT IT_VBAK.
        MOVE IT_VBAK-NETWR TO TEMP_NETWR.
        MOVE IT_VBAK-ERDAT TO TEMP_DATE.
        WRITE:/6 CHECK AS CHECKBOX.
        FORMAT COLOR 1.
        WRITE: IT_VBAK-VBELN UNDER 'SALES ORDER NO.' .
        WRITE: IT_VBAK-ERDAT UNDER 'DATE'.
        FORMAT COLOR OFF.
        FORMAT COLOR 2.
        WRITE: TEMP_NETWR UNDER 'NET PRICE'.
        FORMAT COLOR OFF."TEMP_NETWR,
        FORMAT COLOR 3.
        WRITE:IT_VBAK-VKORG UNDER 'SALES ORG',
              IT_VBAK-VTWEG UNDER 'DIST CHANNEL',
              IT_VBAK-SPART UNDER 'DIVISION'.
        FORMAT COLOR OFF.
        SKIP 1.
    *FOR SUBTOTALS
        AT END OF SPART.
          SUM.
          FORMAT COLOR 5.
          WRITE:/6 'SUB TOTOAL OF NET PRICE IS :  '.
          WRITE: 32 IT_VBAK-NETWR CURRENCY 'INR'.
          FORMAT COLOR OFF.
          SKIP 2.
        ENDAT.
    *FOR GRAND TOTALS
        AT LAST.
          SUM.
          FORMAT COLOR 6.
          WRITE:/6 'GRAND TOTOAL OF NET PRICE IS :  ',
          32 IT_VBAK-NETWR CURRENCY 'INR'.
          FORMAT COLOR 6.
        ENDAT.
      ENDLOOP.
    TOP-OF-PAGE.
      FORMAT COLOR  6.
      WRITE:/8    'SALES ORDER NO.',
           27   'DATE',
           42   'NET PRICE',
           57   'SALES ORG',
           70   'DIST CHANNEL',
           87   'DIVISION'.
      FORMAT COLOR OFF.
      SKIP 1.
    *WHEN SALES ORDER IS SELECTED
    AT LINE-SELECTION.
      CASE :SY-LSIND.
        WHEN '2'.
          GET CURSOR FIELD FNAM VALUE FVAL.
          IF FNAM <> 'WA_VBAK-VBELN'.
            MESSAGE E006(ZRP_MSG).
          ELSE.
            SET PARAMETER ID 'MAT' FIELD FVAL.
            CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
      ENDIF.
        ENDCASE.
    *WHEN CLICKED ON PUSH BUTTON IN THE APPLICATION BAR
    AT USER-COMMAND.
      CASE:SY-UCOMM.
        WHEN 'DISP'.
          DO.
            CLEAR CHECK.
            CLEAR: WA_VBAK,TEMP_DATE_STR.
            READ LINE SY-INDEX FIELD VALUE CHECK
               IT_VBAK-VTWEG INTO WA_VBAK-VTWEG
    *           IT_VBAK-NETWR INTO TEMP_NETP_STR
               IT_VBAK-VBELN INTO WA_VBAK-VBELN
               IT_VBAK-ERDAT INTO TEMP_DATE_STR
               IT_VBAK-VKORG INTO WA_VBAK-VKORG
               IT_VBAK-SPART INTO WA_VBAK-SPART.
            IF SY-SUBRC <> 0.
              EXIT.
            ELSEIF CHECK = 'X'.
              FORMAT COLOR 1.
              WRITE: 8 WA_VBAK-VBELN HOTSPOT. "UNDER 'SALES ORDER NO'
              WRITE: 25 TEMP_DATE_STR." UNDER 'DATE'.
              FORMAT COLOR OFF.
    *       FORMAT COLOR 2.
    *                   WRITE: 44 TEMP_NETP_STR." UNDER 'NET PRICE'.
    *       FORMAT COLOR OFF.
              FORMAT COLOR 3.
              WRITE:44 WA_VBAK-VKORG," UNDER 'SALES ORG',
             59 WA_VBAK-VTWEG," UNDER 'DIST CHANNEL',
             72  WA_VBAK-SPART." UNDER 'DIVISION'.
              FORMAT COLOR OFF.
              SKIP 1.
            ENDIF.
          ENDDO.
      ENDCASE.
    TOP-OF-PAGE DURING LINE-SELECTION.
      CASE:SY-LSIND.
        WHEN 1.
          FORMAT COLOR  6.
          WRITE:/8    'SALES ORDER NO.',
                 25   'DATE',
    *       44   'NET PRICE',
                 44   'SALES ORG',
                 58   'DIST CHANNEL',
                 72   'DIVISION'.
          SKIP 1.
          FORMAT COLOR  OFF.
    <b>if helpful reward some points.</b>
    Message was edited by:
            suredarreddy pulimamidi

  • Not able to select data using DB link.

    Hi ,
    I have created the database link in oracle 8.1.7.0.0 to oracle 8.1.7.4.0
    But I am not able to select data using DB link.
    The error is = ORA 12154 : TNS: could not resolve service name.
    I have created the DB link with the same command in oracle 9.2.0.4.0 to oracle 8.1.7.4.0. I can select data using this link.
    Please suggest me the solution.
    Thanks,
    Shailesh

    If the service name is different on the 8i machine than on the 9i machine, you'll need to modify the service name when creating the link from 8i. Can you see the DB link in ALL_DB_LINKS in the 8i database?

  • How to get period date of for a given month from a given date in mdx for SSRS report (mm/dd/yyyy)

    I have a situation,  where i need to write expression Period to date(PTD). i want to know how to get the period date. i want you to help in writing Period date or else is there any function to get period date for a given date(the  date is given
    from the parameter dynamically) in MDX for SSRS report
    ram

    Hi ram,
    Per my understanding that you want to get the period date based on the month selected and the given date, right?
    Could you please provide details information below to help us better understanding your requirements, thus we will be more effective to provide an solution:
    What is the format of the period date you want to get, is this date in the DB and you want to filter it based on the month and the given Date?
    Did the month and given date are two parameters in the report? if possible, could you please provide some sample data in the DB and also the snapshot of the report structure
    I assume you want to get the period date(mm/dd/yyy) between the select month(e.g:Feb) and the given date (10/1/2014) and you should get the date between(02/01/2014-10/1/2014).
    If so,and you also have two parameter "Month","EndDate"(EndDate is the given date), please reference to details information below:
    You can create an new parameter "BeginDate" (Date/Time) which is the begin date of the period, you can use the expression to get the value based on the value of the month and the year value from the given date,finally hide this parameter:
    Specify the available value:
    Label:=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value)
    Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
    Specify the default Value:
    Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
    Add filter to the dataset as below:
    Preview you will get all the date in the given Period:
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu

  • Date issue when exporting data to Excel from SSRS report, where date is less than 1/1/1900

    Hi,
    I am using SSRS report to display the data from database. In that data, One of the column is DATE. when I am exporting to Excel all that dates are displaying fine except 1/1/1800 12:00 AM. Instead of 1/1/1800 12:00 AM it is displaying XXXXXXXXXXXXXX values.
    Please help me to fix the issue.
    Please let me know if more clarification required.
    Thanks In advance.

    Hello,
    We can use Cstr() function to convert the Date type data to String data. Suppose we have a field named DateTime, please refer to the expression below:
    =Cstr(Fields!DateTime.Value)
    Then we can get a string type data. There is an article about SSRS expression, you can refer to it.
    http://msdn.microsoft.com/en-us/library/ms157328.aspx
    If you have any questions, please feel free to let me know.
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • Custom code dll as a data source for an SSRS report

    I'm trying to create a report which relies on using some custom code written in VB.net. I am using the custom code to access the Server Management Objects SMO API in MSSQL 2012. I am able to supply an MSSQL object name (a database table
    for example)and then return a list of dependant objects using the dependency walker class (stored procedures, triggers, UDF's, other tables etc.) which rely on the parent object if you will. I am able load the results into a dataset in the custom code. My
    question is how can I get that dataset to be consumed as a data source and appear in my report. I've read many articles on how to use scripts to supply values for various report property settings. I just haven't seen an example of using a dll
    to supply a dataset. I am assuming it is possible. Any thoughts or advice would be appreciated. Cheers     

    Hi mdmck,
    According to your description, you want to create an SSRS report with custom code as data source, right?
     To use custom code in Reporting Services, we need to add a reference to your custom assembly, create a new CodeGroup for your custom assembly, and then grant full trust permissions. For detail information, please refer to the following steps:
    Open the report that will reference the custom assembly.
    On the Report menu, click Report Properties.
    In the Report Properties dialog box, click the References tab.
    Under References, click the ellipsis (...) button that is next to the Assembly name column header.
    In the Add References dialog box, click Browse.
    Locate and then click the custom assembly. Click Open.
    In the Add References dialog box, click OK.
    In the Report Properties dialog box, click OK.
    If the custom assembly requires more permissions than the default Execution level permissions, we need to create a new CodeGroup for your custom assembly, and then grant full trust permissions.
    Here are relevant threads you can reference:
    https://social.technet.microsoft.com/Forums/en-US/c297bddc-c33c-4386-b284-41c1d87f37c6/custom-dlls-in-ssrs-reports?forum=sqlreportingservices
    https://social.technet.microsoft.com/Forums/en-US/27de3f46-5174-480d-b4d1-5e32772dae35/ssrs-2005-custom-code-shared-data-source-connection-string?forum=sqlreportingservices
    For more information about How to use custom assemblies or embedded code in Reporting Services, please refer to the following document:
    https://support.microsoft.com/kb/920769?
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    If you have any feedback on our support, please click
    here.
    Wendy Fu
    TechNet Community Support

  • How to display table field data using checkbox

    Dear sir,
              I have created PR using ME51N.  Our PR datas in EKPO table. 
              I have created select-option with prdat and Checkbox for to view PR open or closed status.
              I want check PR status details from date to date using check box.
             I have created the following code, but i will not generate output
    DATA: BEGIN OF leban OCCURS 0.
            INCLUDE STRUCTURE ekpo.
    DATA END OF leban.
    DATA new(1).
    SELECT-OPTIONS ldat FOR sy-datum. "NO-DISPLAY.
    parameters lopen like new AS CHECKBOX USER-COMMAND opn.
    parameters lclose like new as checkbox user-command cls.
    at selection-screen.
    if ldat is initial.
       message 'Enter a value' type 'W'.
    endif.
    case sy-ucomm.
    when 'opn'.
       perform getpr.
       perform findopenpr  tables leban.
    endcase.
    form getpr.
    select * from ekpo into leban where PRDAT in ldat.
    append leban.
    endselect.
    endform.
    form findopenpr tables ekpo.
        IF LOPEN = 'X'.
           select single * from ekpo into leban where PRDAT IN LDAT AND banfn = lopen.
           SORT leban BY bnfpo.
           CLEAR leban.
           if not sy-subrc = 0.
             message  'PR OPEN' type 'S'.
           ENDIF.
           WRITE: / LEBAN-BANFN.
        ENDIF.
    endform.
    With Regards,
    Baskaran

    Hi,
    Try this way,
    You shouldnt be writing two select statements into the same internal table. Also i dont see any use of perform getpr. so remove that and try
    DATA: BEGIN OF leban OCCURS 0.
    INCLUDE STRUCTURE ekpo.
    DATA END OF leban.
    DATA: BEGIN OF leban1 OCCURS 0.
    INCLUDE STRUCTURE ekpo.
    DATA END OF leban1.
    DATA new(1).
    SELECT-OPTIONS ldat FOR sy-datum. "NO-DISPLAY.
    parameters lopen like new AS CHECKBOX USER-COMMAND opn.
    parameters lclose like new as checkbox user-command cls.
    at selection-screen.
    if ldat is initial.
    message 'Enter a value' type 'W'.
    endif.
    IF LOPEN = 'X'.
    select single * from ekpo into leban where PRDAT IN LDAT AND banfn = lopen.
    if sy-subrc = 0.
    message 'PR OPEN' type 'S'.
    ENDIF.
    WRITE: / LEBAN-BANFN.
    endif.
    if LCLOSE = 'X'.
    select single * from ekpo into leban1 where PRDAT IN LDAT AND banfn eq space.
    if sy-subrc = 0.
    message 'PR CLOSE' type 'S'.
    ENDIF.
    WRITE: / LEBAN1-BANFN.
    ENDIF.
    Regards,
    Vik
    Edited by: vikred on Aug 7, 2009 6:55 PM
    Edited by: vikred on Aug 7, 2009 7:23 PM

  • Change Customer master Address Data using Structure biadd2 in report rfbide00.?

    hello
         i want to change Customer  Master Address Data using using RBIDE00 report program but when i execute the report it will accept input from batch file
    but the same is not getting updated in  customer master .
    please  help me to resolve this issue .
    thanks & regard
    laxmikant soni

    Found the answer from SDN - not possible unless using some BUS.
    RFBIDE00 - Address data issue
    Thread closed.

  • How to hide particular data on rows in ssrs reports ?

    Hi,
    i have requirement, in my ssrs report i have columns like sites,Accounts,LOBs and etc.,
    i don't want to show some of the accounts in rows for some particular sites, please check the below image.here i don't want to show the ally finacial and fox tel accounts in the report, and even client  don't want to add accounts to the filters.
    please help me with this issue,how to not show those particular accounts for particular sites in the report.
    *here we are building reports on cube.
    Thanks in advance,
    Naveen 

    I think I would create an internal multivalue parameter with the default values set to the accounts you wish to exclude... call it ExcludeAccts. Then use this parameter to filter out these accounts in the dataset, not the report. I am not an MDX guy but
    in Transact-SQL the filter would be:
    WHERE Account NOT IN (@ExcludeAccts)
    This will return all accounts except for those explicitly excluded in your parameter. The reason I would use a parameter is maintenance. Once the appropriate equivalent statement is added to your MDX, you just need to update the parameter default values
    to change the exclusions rather than editing the MDX each time.
    "You will find a fortune, though it will not be the one you seek." -
    Blind Seer, O Brother Where Art Thou
    Please Mark posts as answers or helpful so that others may find the fortune they seek.

  • Dump while selecting data using ranges

    Hi everybody,
    I am using ranges to select data from BSEG table.
    In a particular case the ranges table contains around 7000 entries, hence it leads to a short dump. Is there any limitation associated with ranges? with fewer number of entries it works fine. The code is already optimized properly for performance tuning purposes. There are no duplicate entries in ranges table i.e. all 7000 entries are unique and all are with sign as 'I' and option as 'EQ' , so all entries are unique single values.
    Apart from this I have another query also. While selecting data from BSEG / CATSEKKO  table if I use for all entries, then complete data is not fetched, However when I use ranges for same set of values, the missing records are also fetched. Any ideas for this behavior ? Is this related to cluster / pooled / transparent table types?
    Thanks,
    Harmeet Singh.

    Hello,
    I am using ranges to select data from BSEG table.
    In a particular case the ranges table contains around 7000 entries, hence it leads to a short dump. Is there any limitation associated with ranges? with fewer number of entries it works fine. The code is already optimized properly for performance tuning purposes. There are no duplicate entries in ranges table i.e. all 7000 entries are unique and all are with sign as 'I' and option as 'EQ' , so all entries are unique single values.
    i have already encoutered problem using range in SELECT statement. TO avoid the SELECT statement to dump, i have changed my SELECT statement : FOR ALL ENTRIES instead using range.
    +Apart from this I have another query also. While selecting data from BSEG / CATSEKKO table if I use for all entries, then complete data is not fetched, However when I use ranges for same set of values, the missing records are also fetched. Any ideas for this behavior ? Is this related to cluster / pooled / transparent table types?+
    Could you show us the SELECT statement ?
    Cordialement,
    Chaouki AKIR.

  • Multiple select queries used in Excel BI report ,fetching data from Sharepoint DB(SP2010_Prod_ProjectServer) causing blockage on DB ,when more than one workbook(same copy of Excel BI Report) refreshed using Refresh All option.

    I am using mutiple select queries to fetch data from Project Server 2010 DB(its sharepoint DB) and these queries fetch data in Excel BI report by establishing connection with DB using instance name and all. I have enhance all these select queries and data
    is being fetched in secs. but when more than one copy of same Excel BI report is refreshed using 'Refresh All' option, then these select queries cause blockage on DB.
    Please let me know mitigation for this blockage issue.
    Should I use begin transaction and commit transaction statements/ shared lock statements.
    please reply

    Hi,
    run same query at the same time?

  • How to get selected values (using checkBox) from DataGrid in flex.

    i have a datagrid which is getting values from a XML file (getting this xml file from database using PHP and HTTP request in flex). i have created a checkbox in every row in data grid. and here is my requirement: i want to select tow or three check-box and would like to get all the values form that particular ROWs in some form , prefered arraycollection (such that i can pass this array directly to a bar chart) .. can some one help me as i am new to flex .
    code ......
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" creationComplete="siteData.send()">
              <mx:Script>
                        <![CDATA[
                                  import mx.collections.XMLListCollection;
                                  import mx.controls.*;
                                  import mx.events.ListEvent;
                                  import mx.rpc.events.ResultEvent;
                                  import mx.controls.Alert;
                                  [Bindable] private var fullXML:XMLList;
                                  private function contentHandler(evt:ResultEvent):void{
                                            fullXML = evt.result.values;
                        ]]>
              </mx:Script>
              <mx:VBox>
                        <mx:Label text="This Data Grid is loading the full XML file"/>
                        <mx:DataGrid width="600"  id="datagrid" dataProvider="{fullXML}">
                                  <mx:columns>
                                            <mx:DataGridColumn headerText="Select">
                                                      <mx:itemRenderer>
                                                                <mx:Component>
                                                                          <mx:HBox horizontalAlign="center">
                                                                                    <mx:CheckBox id="check"/>
                                                                          </mx:HBox>
                                                                </mx:Component>
                                                      </mx:itemRenderer>
                                            </mx:DataGridColumn>
                                            <mx:DataGridColumn dataField="release_version" headerText="Release"/>
                                            <mx:DataGridColumn dataField="build" headerText="build"/>
                                            <mx:DataGridColumn dataField="time_login" headerText="time_login"/>
                                            <mx:DataGridColumn dataField="time_tunnel" headerText="time_tunnel"/>
                                            <mx:DataGridColumn dataField="rate_login" headerText="time_tunnel"/>
                                            <mx:DataGridColumn dataField="rate_tunnel" headerText="rate_tunnel"/>
                                  </mx:columns>
                        </mx:DataGrid>
              </mx:VBox>
              <mx:HTTPService url="http://localhost/php_genxml.php" id="siteData" result="contentHandler(event)" resultFormat="e4x"/>
    </mx:Application>
    as you can see in the image , i will get this datgrid . now i want to select two or three checkboxes and would like to get all the values form the perticular row (for which check box is selected). i would like to get in array from such that i can driectly pass them to bar chart....
    can some one help me in this. as i m new to flex. or if you have some other suggestion ...My final requirement is: select some values and generate bar gharph for those values.
    please help me in this.
    thanks
    tanuj

    Hi Timo -
    Thanks for the suggestion. I could get the values as below:
    public void multiOpUnitValChange(ValueChangeEvent valueChangeEvent) {
    // Add event code here...
    BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
    DCIteratorBinding opUnitIter = (DCIteratorBinding)bindings.get("OperatingUnit2VOIterator");
    Integer[] values = (Integer[])valueChangeEvent.getNewValue();
    for (int i=0; i<values.length; i++){
    Row row = opUnitIter.getRowAtRangeIndex(i);
    System.out.println(row.getAttribute("OpUnitId"));
    Thanks -
    Rohit

  • "Dynamic Date" in a suscribed SSRS report

    I need to add a filter to a report which will then function as a subscription.
    I need the report to generate data from 6am on a previous day to 6am on the current day.  
    The parameter I have created gives the StartDate and EndDate fields.  These need to auto fill in the report so the subscription service will use the default settings.  This report will run at 8am on the current day.  
    When I go to enter an expression for the default value on StartDate, I know it has to have a today -1 code, but then how do you get it to >=6am?
    When I go to enter an expression for the default value on EndDate, I know it has to have a today () code, but then how do you get it to stop at >6AM?
    Can anyone help me with these default value expressions as I will be using them in a bunch of reports I'm going to be creating.
    Thanks!

    Hi Jon Mensching,
    According to your description that you want to add a filter to filter the report which have the date between an dynamic StartDate and EndDate, StartDate at 6am of the (current day-1) and EndDate is at 6am of the current day, right?
    I have tested on my local environment and we can create an dataset to get the dynamic StartDate and EndDate and then create two parameter which default value specified as “Get values from a query”, finally, we can add the filter to filter the date between
    the startdate and the enddate.
    Details steps below for your reference：
    Create the Dateset2 using this query to get the dynamic startdate and enddate(take reference of the query by Uri Dimant’s )
    Query:
    SELECT (DATEADD(HOUR, 06, DATEADD(DAY, DATEDIFF(DAY, '20010101',
    GETDATE()-1), '20010101'))) as startdate,
    (DATEADD(HOUR, 06, DATEADD(DAY, DATEDIFF(DAY, '20010101',
     GETDATE()), '20010101')))as enddate
    Create two parameters “startdate” and “enddate” and spacify the default value “Get values from a query” (DateSet2)
    Add the filter of main DataSet(DataSet1) like below:
    If you still have any question, please feel free to ask.
    Regards
    Vicky Liu

  • Issue with Date used to Filter a Report

    I have the following source for a report. The source was working correctly before and I am trying to add a date filter to it.
    q VARCHAR2(32767); -- query
    w VARCHAR2(4000) ; -- where clause
    w2 VARCHAR2(4000) ; -- where clause for salesrep
    w3 VARCHAR2(4000) ; -- where clause for agent
    w4 VARCHAR2(4000) ; -- where clause for date range
    we VARCHAR2(1) := 'N'; -- identifies if where clause exists
    BEGIN
    q := 'SELECT "TBLCALL"."CALLID", "TBLSALESREP"."LNAME" || '', '' || "TBLSALESREP"."FNAME" as "SalesRep", "TBLAGENT"."LNAME" || '', '' || "TBLAGENT"."FNAME" as "Agent", "TBLAGENT"."AGENTID", "COMPLETEDATE", htmldb_util.get_since("CREATEDATE") as "Age", "CREATEDATE",
    "TBLDIRECTOR"."DIRECTORNAME",
    decode("CREQUESTID",NULL,''None'',"CREQUESTID") as "# REQUESTS", "REQUESTSTATUS", "ESCALATIONNAME" '
    ||
    ' FROM "#OWNER#"."TBLAGENT", "#OWNER#"."TBLSALESREP", "#OWNER#"."TBLDIRECTOR", "#OWNER#"."TBLCALL", "#OWNER#"."VW_CALLREQUESTS", "#OWNER#"."VW_CALLSTATUS", "#OWNER#"."VW_CALLESCALATION" '
    ||
    ' WHERE "TBLAGENT"."AGENTID" = "TBLCALL"."AGENTID"
    and "TBLSALESREP"."DIRECTORID"="TBLDIRECTOR"."DIRECTORID"
    and "TBLCALL"."CALLID"="VW_CALLREQUESTS"."CALLID"(+)
    and "TBLCALL"."CALLID"="VW_CALLSTATUS"."CALLID"(+)
    and "TBLCALL"."CALLID"="VW_CALLESCALATION"."CALLID"(+)
    and "TBLSALESREP"."SALESREPID"="TBLCALL"."SALESREPID" ';
    IF :P1_COMPLETED = '0'
    THEN
    w := ' COMPLETEDATE is null';
    we := 'Y';
    END IF;
    IF :P1_COMPLETED = '1'
    THEN
    w := ' COMPLETEDATE is not null ';
    we := 'Y';
    END IF;
    IF :P1_SELECT_SALESREP != '-1' THEN
    w2 := ' AND TBLCALL.SALESREPID= :P1_SELECT_SALESREP ';
    ELSE
    w2 := '';
    END IF;
    IF :P1_SELECT_AGENT != '-1' THEN
    w3 := ' AND TBLAGENT.AGENTID= :P1_SELECT_AGENT ';
    ELSE
    w3 := '';
    END IF;
    IF :P1_STARTDATE is not null AND :P1_ENDDATE is not null THEN
    w4:= ' AND TBLCALL.CREATEDATE between ' || to_date(NVL(:P1_STARTDATE,'01/01/1900'), 'MM/DD/YYYY') || ' AND ' || to_date(NVL(:P1_ENDDATE,'12/31/9999'),'MM/DD/YYYY');
    ELSE
    w4 := '';
    end if;
    IF we = 'Y' THEN
    q := q || ' AND ' || w || w2 || w3 || w4 ;
    ELSE
    q := q || w2 || w3 || w4;
    END IF;
    RETURN q;
    END;
    Each time I try to run the page... the report gives me the following error:
    failed to parse SQL query:
    ORA-00904: "OCT": invalid identifier
    It looks like a date format issue, but I have tried several things to resolve it and it still does not work... What can I do?

    I think you have a problem with format masks.
    Check the format masks that are used in P1_STARTDATE and P2_STARTDATE

  • Order mismatch in selected data using Select query

    Hello Experts,
    We are upgrading from 4.6C to ECC6. I came across a select query on a custom table, which gives different order of data from 4.6C to ECC6. Data (no. of records) is same in both the servers but order is different. Table doesn't have indexes in either 4.6C or ECC6. What would be the cause for order change?
    Further, in 4,6C, ECC6 and data bases order of the data is totally different. Select query have some conditions in where clause with select options, but in both the cases (4.6C and ECC6) I am not passing any data from the selection screen so am getting entire data from the data base.
    Thanks in advance
    Phalani

    From the SAP service market place I found that
    1. Unless we use SORT or ORDER BY clause the order of the data is not in our control.
    2. In 4.6C, two same select queries never give the result in the same order, if the primary key contains character fields.
    Thanks for your help.
    Phalani

Maybe you are looking for

  • IMovie 7.1.4 crashing during import

    iMovie used to work like a champ. I moved to version 7.1.4, and now I can't import movie from A CERTAIN DIRECTORY. I can import from other directories, but just looking at this one makes iMovie crash. The only things in it are TIVO files and mp4 file

  • Web Dynpro Code Wizard doesn't have context tab

    When doing web dynpro development and when clicking the Web Dynpro Code Wizard, I can't see the context tab.  It looks like this: [http://twitpic.com/z2q92].  In other SAP systems I have seen the wizard look like this, where it has two tabs one of wh

  • Transaction launcher-'Transaction execute is unknown'

    Hi, I am trying to launch transaction BP in IC web client I have configured the launcher wizard and entered the URL in transaction 'CRMC_IC_CROSS_SYS . I  have added the navigation link but when i click on this link I get  SAP initial screen ( easy a

  • Flex Mobile in Kiosk mode

    Hi, I was wondering if it is possible to run a Flex Application under Android in kiosk mode? I mean the application prevent the home button and any other way that makes the application to exit. Any help or direction will be appreciated. thanks

  • Catalog -code group & codes (object part,causes,damage,etc)

    Dear PM gurus, request kindly help to activate and flow the catalog - code groups & codes in standard report of iw29 or iw59 for the following code group & code Notification Header level of Items : 1. Code group - Object part  & code 2. code group -