REP-0066 Error???

Hi all,
When I run the Oracle report in the Reports
Runtime Iam getting this error message:
Rep-0066 Error Executing CA utility
REP-3335 Unhandled Internal CA Error.
calaa1
Iam using Oracle 3.0.
I would appreciate any suggestions to my query.
TIA
sg
null

As Rajesh notes, this is commonly associated with running out of resources (either in memory, or the file system).
As a general rule of thumb it may be better to break up the run of your report into a number of smaller runs. This is generally more stable (i.e., you're less likely to run out of resources), but is also more maintainable (i.e., if one run breaks then you can just re-run that section, not the entire report).
Regards,
Danny

Similar Messages

REP-0066 Error Executing CA utility

Hi all,
When I run the Oracle report in the Reports
Runtime Iam getting this error message:
Rep-0066 Error Executing CA utility
REP-3335 Unhandled Internal CA Error.
calaa1
Iam using Oracle 3.0.
I would appreciate any suggestions to my query.
TIA
sg
null

Hi
Just tried this with Reports 6i patch -11 and I could not reproduce the problme. Is this specific to one rdf only? CA utility error usually means some issue with the memory requirement. Check of your temp directory has enough space left.
Thanks
Rohit

REP-0066: Error executing CA utility, REP-3335: Unhandled Internal CA Error

I had update reports to patchset 11.
then i tried to send a report with email from the previewer.
i get the following error messages:
REP-0066: Error executing CA utility.
REP-3335: Unhandled Internal CA Error.
caxer 1
i tried the second one, it works.
i closed the reports background engine and try it again, the some error.
but with patchset 9 it worked without problems.

Hi
Just tried this with Reports 6i patch -11 and I could not reproduce the problme. Is this specific to one rdf only? CA utility error usually means some issue with the memory requirement. Check of your temp directory has enough space left.
Thanks
Rohit

Error rep-0066 and rep-3335

I have problems with reports builder, suddenly i recive the next error :
REP-0066 Error executing CA utility.
REP-3335 Unhandled internal CA Error
calaa 3
I don't have any problems accesing the data base, the free space in my hard disk is huge and all the software was reinstaled, but the error still apears, If anybody has experienced this or has any idea why this is hapening please let me know.
Tnx for your help.

Hi Yuri
Is this specific to one RDF file only? There are no known reason for this error [which is very generic error]. All it tells is that some internal error is occured in CA utility and is very difficult to predict like this. I suggest, you get in touch with Oracle Support on this.
Thanks
Rohit

REP-0066 AND REP-3335

Hi All,
I got an error when I ran one report
REP-0066:error executing CA utility
REP-3335:Unhandled Internal CA Error.
calaa 1.
I am using Developer 2000/report v2.1.
Your help is highly appreciated!
Thanks,

Even if I run this report from developer 2000, I got same error. (Initially , it ran from another Oracle Form application). The query is little complicated including datalinks so I wasn't so sure how to try default layout. need to retrieve a lot of information. But if you are willing, I can share the code with you. This error is so crucial to my work.
Thanks,
Donghong

Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.

Would someone tell what I missed, I have set up the following:
1) a report using report builder on NT
2) my database is in Unix
3) my report server is started in NT
4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job has terminated with error.
Reports Server Replies:
REP-3002: Error initializing printer. Please make sure a printer is installed.
Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
null

It sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
http://hostname:port/cgi-bin/rwcgi60exe?
If you get a help screen, then you should be able to bring up your report.
Regards,
Xiaoling

REP-770 Error while executing the report.

Hi,
I am trying to run a report in Application Server 10g. I am executing this report from a form.
When I try to run the report using the 'rdf', I get the error
"Terminated with error: <br>REP-770: There exist uncompiled program unit(s). REP-1247: Report contains uncompiled PL/SQL."
But if I run the report as 'rep' then the report works fine. Now after this if I run the report as 'rdf', it works fine again.
Just to summarise - The problem occurs if I first try to run the report as rdf. But the problem disappears if I run the report as rep first before running it as rdf.
Could someone help me solve this issue.
Thanks
Aruna

Hi Aruna,
I can see 2 bugs logged on Reports 9.0.4.1 (that means 10g patch 1) that report a similar problem:
BUG 4050488 - JSP REPORTS CONTAINING REF CURSOR ASKS FOR COMPILATION EVERYTIME WITH WEB LAOUT
and
BUG 4040844 - REF CURSOR QUERY REP-737 ORA-1247 RUNNING ON LINUX
Another bug reported on 10g has been fixed in upcoming Reports version 10.1.2:
BUG 3324576 - SRW.APPLY_DEFINITION IN PGM UNIT FAILS USING .REP FILE WITH REP-1457 ERROR
They are published bugs. See if you are hitting the same issue. Though I don't think that these bugs reported REP-1247 only the FIRST time you run the report.
Secondly, when I said "compile on the same platform on which you are going to run", I meant this - if you are going to run the report on OracleAS installed on Win 2000, you must compile the report in Reports Builder on Win 2000. Similarly, if you are going to run the report on OracleAS installed on Linux, you must compile the report in Reports Builder on Linux, before running it.
Navneet.

Reports Builder Error - REP 1070 Error while opening or saving document

Hi,
I tried opening an rdf file in Reports Builder 10g and 6i. I get the REP 1070 error.
Kindly suggest a solution for this.
Thanks,
Anand

Hi,
Edit the system registry and assign REPORTS_PATH then your problem will be cleared.

REP-3002: Error initializing printer

Hello,
This is my configuraton:
Computer 1 : nt4, sp3, installed: Oracledatabase 7.3.4
Computer 2 : nt4, sp3, installed: Oracle WebDb, forms 6i, formserver 6i and reports 6i.
Services WebDb and Listener are running.
I've connected an HP LaserJet III to the parallel port of computer 2. In the printer
control panel of NT4, this printer is set as the 'default' printer.
'myform.fmx' is a simple form.
The code consists only of a 'when-button-pressed' trigger as follows:
declare
pl paramlist;Ln varchar(15) :='Elsa';
BEGIN
pl :=get_parameter_list(Ln);
if not id_null(pl) then destroy_parameter_list(pl);end if;
pl :=create_parameter_list('Elsa');
add_parameter(pl,'DESTYPE', text_parameter,'PRINTER');
run_product(REPORTS,'C:\ORANT\REPORT60\myrep.rep',1,BATCH,FILESYSTEM,pl);
destroy_parameter_list(pl);
END;
'myrep.rep' is a simple report, consisting of:
select user from dual;
generated by the wizard.
When I run the form in preview for the web in formbuilder 6i, then it works very well,
it prints my report.
But when I run it from the cgi 'ifcgi60.exe' by the command
start -> programs -> oracle forms 6i -> run a form on the web
it returns
http://pent2.easyware.be/dev60cgi/ifcgi60.exe?
form=myform.fmx&userid=&otherparams=useSDI=yes&
lookAndFeel=generic&colorScheme=teal
then the error returned in the webbrowser is
'REP-3002: Error initializing printer. Please make sure a printer is installed.'
if parameter 'DESTYPE' is set to 'SCREEN' then it works very well, I can print by clicking the print icon.
Please can someone help me.
Best Regards,
Carl Willems.
[email protected]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by aapmens ():
Hello,
This is my configuraton:
Computer 1 : nt4, sp3, installed: Oracledatabase 7.3.4
Computer 2 : nt4, sp3, installed: Oracle WebDb, forms 6i 6.0.8.8.0, formserver 6i and reports 6i 6.0.8.8.3.
Services WebDb and Listener are running.
I've connected an HP LaserJet III to the parallel port of computer 2. In the printer
control panel of NT4, this printer is set as the 'default' printer.
'myform.fmx' is a simple form.
The code consists only of a 'when-button-pressed' trigger as follows:
declare
pl paramlist;Ln varchar(15) :='Elsa';
BEGIN
pl :=get_parameter_list(Ln);
if not id_null(pl) then destroy_parameter_list(pl);end if;
pl :=create_parameter_list('Elsa');
add_parameter(pl,'DESTYPE', text_parameter,'PRINTER');
run_product(REPORTS,'C:\ORANT\REPORT60\myrep.rep',1,BATCH,FILESYSTEM,pl);
destroy_parameter_list(pl);
END;
'myrep.rep' is a simple report, consisting of:
select user from dual;
generated by the wizard.
When I run the form in preview for the web in formbuilder 6i, then it works very well,
it prints my report.
But when I run it from the cgi 'ifcgi60.exe' by the command
start -> programs -> oracle forms 6i -> run a form on the web
it returns
http://pent2.easyware.be/dev60cgi/ifcgi60.exe?
form=myform.fmx&userid=&otherparams=useSDI=yes&
lookAndFeel=generic&colorScheme=teal
then the error returned in the webbrowser is
'REP-3002: Error initializing printer. Please make sure a printer is installed.'
if parameter 'DESTYPE' is set to 'SCREEN' then it works very well, I can print by clicking the print icon.
Please can someone help me.
Best Regards,
Carl Willems.
[email protected]<HR></BLOCKQUOTE>
null

Parameter Form not calling the Main report - Gives REP-0110, REP-1070, REP-0110 error

I am using run_report_object to call a report in which the user has to input some paramters. I have followed the instructions as in the Oracle White paper document on Forms/Reports integration.
The paramter report does come up but when I hit the submit button, I get an error
REP-0110: Unable to open file 'rclug005'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'rclug005
I've checked the privileges and everything's fine on that front. Also, I can get to open the report with the web.show document built-in with paramform setting = No.
I am guessing something's wrong with the html constructed in the parameter form which is,
<form method=post action="http://myserver/dev60cgi/RWCGI60.EXE?">
<input name="hidden_run_parameters" type=hidden value="server=myserver &report=rclug005&destype=Cache&desformat=html&userid=uid/pwd@test">
In the Report Before Form trigger, I've copied the foll. html code from the Oracle White paper,
vc_parameter_form :=
'<html><body bgclor="ffffff"><form method=post action="'||:p_action||'">'||
'<input name="hidden_run_parameters" type=hidden
value= "'||vc_hidden_runtime_values||'">'||'<center><p>
<table border=0 cellspacing=0 cellpadding=0><tr><td>
<input type=submit></td><td> width=15
<td><input type=reset></td></tr></table><p><hr></p>';
I've set the :p_action parameter to a value of http://myserver/dev60cgi/RWCGI60.EXE?
Also, In the end of the report before form trigger I added this
srw.set_before_form_html(srw.text_escape, vc_parameter_form);
Any help/tips is appreciated & Thanks.

Thanks Danny,
I am building the variable exactly as in the White paper in the "before form" trigger using exactly the same values give there.
vc_hidden_runtime_values := 'server='||:p_servername||'&report='||vc_report_name||'.rep&destype='||:destype||'&desformat='||:desformat||'&userid='||:p_userinfo;
My report has some extra parameters too it expects. So do I have to include the names of those parameters too in the string above?
For example, in my report a user parameter is named 'print_date', which I do see and populate with value in the parameter form, then do I have to build that in the vc_hidden_runtime_values string above.
I am using Report 6.0.8.11.3 on 9iAS.

Reports: REP-0177 & REP-3000 errors :-( (RH 6.2.2 HA 1.0)

Hi Folks, hi Oracle,
we have some serious problems here with Oracle Reports 6i Patch 6 which is running under Red Hat HA (Red Hat 6.2.2 High Aviability Server 1.0, based on Zoot)
Because HA installs without X i have installed all needed X-packes to get a X11 system, and it runs fine.
Then i set up request for a reports from the console i get the following message:
[oracle@webserver1-do bin]$ ./rwcli60 REPORT=xxxx.rdf USERID=xxxxx/xxxxx@xxxx SERVER=xxxxx DESTYPE=SYSOUT DESFORMAT=PDF benu_id=x masszeile=xxx
REP-0177: Error while running in remote server
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
If i change the DISPLAY to a faked adress, i become the 111-errors (cant connect to X11-Socket), so i think the repserver connects to X but have some other problems with X.
If i change DISPLAY to an another Linux-Server with fully installed X11 & KDE, the report runs fine.
And all the same if the call the report over apache.
I have read the Bug-Info about Bug 1108326, but i have the same, if i change the format to HTML.
Any suggestions?
H.-C.G|rsoy
null

hello,
be aware, that you have to set the display in the environtment of the server (meaning the startup-script of the server).
regards,
the oracle reports team

REP-0081 error when emailing report output

I am using RUN_REPORT_OBJECT to execute a report from a form. I have the report set up as a Report object in the form. The report runs fine to screen or to file, but I am getting an error when attempting to email report in batch mode:
REP-0081: Error during file I/O operation.
REP-0110: Unable to open file 'mpa02448.pdf'.
scaba 14
Execution Mode = Batch
Report Destination = Mail
Report Destination Name = [email protected]
Report Destination Format = PDF
I am able to send email to the same address via UTL_SMTP directly from the form, so it is not an email handler problem.
Any ideas?

I have verified the latest patches.
Addresses are indeed in Windows address book.
As far as verifying permissions on the file, the file does not exist. It would appear that the error is generated when creating the PDF file, before emailing occurs. Again, however, I do not have problems writing to file directly.
Is there a default directory used when emailing report for file creation? Perhaps the permissions on that directory need to be changed. Please advise.

REP-51018 + REP-50004 Errors (Urgent)

Hello,
I am working under Oracle 9i iDS on Windows XP Pro.
When I invoke my WebReports from WebForms, I see my Parameter Form that Pops-Up in a new Browser window.
When I hit, the "Submit Query" button, I am prompted to enter the username/password/database information.
I also get a message like:
REP-51018: Need Database User Authentication
I enter the required parameters even though they are already defined by the application code. Then I get an error like:
REP-50004: No Report specified on the command line.
1) Why do I get these errors ?
When I relauch my WebReport from WebForms, it works fine and I can get a WebReports from the WebForms.
2) What is going on ?
PT
PS: I created a generic function called RUN_REPORT_OBJECT_PROC that uses the run_report_object() and web.Show_document built-ins as indicated in:
http://www.oracle.com/technology/products/forms/pdf/10g/frmrepparamform.pdf
PS2: I increased the SESSIONS parameter in the init.ora file and set its value to 9999, but still cannot resolve the issue.
PS3: I get the same REP-51018 error under Forms/Report Services 10g on my Linux box.

Hello,
I used the generic RUN_REPORT_OBJECT_PROC presented in the white paper. The generic procedure makes calls to the run_report_object and the web.show_document built-ins.
The only modification that I have done to this generic function is to add the SYNCHRONIZE keyword before the call to web.show_document built in as was suggested by a technical note on Metalink.
The RUN_REPORT_OBJECT_PROC also makes a call to the ENCODE function which I have also added.
In addition in my WebReports, I added the 3 user parameters: P_ACTIONS, P_SERVER_NAME and P_USER_CONNECT as well as added code to the BeforePForm trigger as indicated in the white paper.
All very straight forward stuff.
On Oracle 9i iDS running under Windows XP Pro, I can generate the Parameter Form then get the REP-51018 followed by the REP-50004 errors when pressing the "Submit" button. If I come back and press the "Reset" button on my Parameter form, I can generate the corresponding WebReport without errors.
These errors occur only the first time that I try to call a WebReport using a Parameter Form from a WebForm.
On the Forms/Reports 10g running on my LinuxServer under iAS, the right hand side Fields for my Parameter Form Parameters are missing, for parameters of type Character + I cannot call-up my WebReports.
YOur feedback is appreciated......
PT
PS: I tried to make modifications to the rwservlet.conf and the repsrv.conf and the rep_Linux2005.conf files without success.

Rep-1340 error for date type

I want to transfore forms date directly to report. then i use run_report_object function. But in forms i use datetime type replace of default date type. then the item can show time. then i revoke the report.rep-1340 error get. Who have better solution. thanks a lot.

Hi ...
pass thedate by a parameter list
but transform the date into char
with to_chat(the_date,format)
in report's query you will may do like this:
select ..... where query_date = to_date(the_parameter,format);
the formats must be the same.
Good look !
Ovidiu ANCUTA
[email protected]

Rep :56092 error

Hi all,
We are converting Reports6i to Reports10g (Report Builder 10.1.2.0.2)
All those reports which are opened in Reports 10g and compiled and tried to run in web layout , either report is coming as blank or it shows Rep:56092 error :class not found for destination type screen
How can i solve this problem ?
Thanks in advance

But Manu the default value in destype is Screen even if i create a fresh report..
Also if i create report from scratch, then no issue is there..
But there are hundreds of reports in 6i. How can i develop all those from scratch?
Is there any solution for this?
Edited by: Dora on Jan 5, 2010 4:22 PM

REP-0066 Error???

Similar Messages

Maybe you are looking for