REP-0081 error when emailing report output

I am using RUN_REPORT_OBJECT to execute a report from a form. I have the report set up as a Report object in the form. The report runs fine to screen or to file, but I am getting an error when attempting to email report in batch mode:
REP-0081: Error during file I/O operation.
REP-0110: Unable to open file 'mpa02448.pdf'.
scaba 14
Execution Mode = Batch
Report Destination = Mail
Report Destination Name = [email protected]
Report Destination Format = PDF
I am able to send email to the same address via UTL_SMTP directly from the form, so it is not an email handler problem.
Any ideas?

I have verified the latest patches.
Addresses are indeed in Windows address book.
As far as verifying permissions on the file, the file does not exist. It would appear that the error is generated when creating the PDF file, before emailing occurs. Again, however, I do not have problems writing to file directly.
Is there a default directory used when emailing report for file creation? Perhaps the permissions on that directory need to be changed. Please advise.

Similar Messages

Error when sending report output to printer from Forms 10g

Hi,
I have a simple report that I am running from a form using run_report_object built-in. I can successfully send the report output to a file but when I send the report output to a printer my report is
terminated with report status of 'TERMINATED_WITH_ERROR'. I am using the default forms service and reports server that comes with the forms builder. How do I specify the reports server to user my default network printer ?Following is the code that runs my report.
Thanks,
Anna
PROCEDURE SEND_TO_PRINTER IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
rep_server system_variables.reports_server%type;
alldone          exception;
BEGIN
     select reports_server
     into rep_server
     from system_variables;
     if rep_server is null then
          msg_alert('Error getting the reports server name', 'I', FALSE);
          raise alldone;
     end if;
     :ctrl.run_report_errors := 'N';
     repid := find_report_object('REP_OBJ1');
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,rep_server);
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
     SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
     IF :ctrl.rg_print = 'P' THEN
          --Send the output to printer.
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
     ELSIF :ctrl.rg_print = 'R' THEN
          --Rich Text Format
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'rtf');
          SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,:ctrl.filename);
     END IF;
     v_rep := RUN_REPORT_OBJECT(repid);
     rep_status := REPORT_OBJECT_STATUS(v_rep);
     WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
     LOOP
          rep_status := report_object_status(v_rep);
     END LOOP;
     IF rep_status = 'FINISHED' THEN
          null;
     ELSE
          :ctrl.run_report_errors := 'Y';
          msg_alert('Error when running report.' || rep_status, 'I', FALSE);
     END IF;
EXCEPTION
     when no_data_found then
          msg_alert('Error getting the reports server name', 'I', FALSE);
     when alldone then
          null;
END;

If you use Windows the user that runs the reports server is usually LocalSystem. Check this in the Windows Services panel.
LocalSystem has no printer access. To be able to print, you have to use a real domain user that has access to the printer. So, change the Log on properties in the Services panel.

REP-1401 error when excuting report

Hi,
I'm running a Report builder report that uses User Parameters and an Oracle stored procedure.
After providing the user parameters the report starts to run for a minute and then returns the message. REP-14-1: 'qr_1refcurds': Fatal PL/SQL error occurred.
Any suggestions on correcting this. The help was no help.
Thanks, Jim

Hi,
As mentioned in the Reports online Help (http://www.oracle.com/technology/products/reports/index.html), this error was caused due to an abnormal condition. Per the Action suggested, may be you would want to first contact your system administrator to determine if the message was caused by something other than Oracle Reports. If you determine that the message was not the result of user error or a system problem, then you can contact Oracle Support Services.

Error when emailing report

I am trying to email generated report using infoview web UI. I am logged in as administrator.
The destination plugin required for this action is disabled. If you require this functionality, please contact your system administrator.

Hi Pradeep,
Please try out the following:
Enable Email destination by navigating to Home->Servers->Destinations of CMC .
Still if you are unable to send document as e-mail from infoview
Goto CentralConfigurationManager(CCM) and restart Destination Job Server.
Now it is possible to send report by e-mail from infoview.
Regards.

PDF Report Error When Distribute the Output?

REP-0069: Internal Error.
REP-57054: In-process job terminated:Executed successfully but there were some errors when distribute the output.
REP-50159: Executed successfully but there were some errors when distribute the output.
Approximately 5000 Pages
Distribute PDF File Approximately 1700 Files
How i can resolve this issue?

Based that you are in base release I will encourage you to upgrade to the latest patchset for 10gR2 (10.1.2.3) and then apply the recommended bundled patch on top of 10.1.2.3 as several issues have been fixed with
those patches.
Reference
Oracle Reports - Recommended Patch Bundle on Top of 10.1.2.3 (Doc ID 1162562.1)
Regards RZ

Error when running reports on the WEB

Hi,
I have been successful in deploying our application on the Web,
using WebDB listener, Developer Server, Report Server and JInitiator 1.1.7.18.
Now the forms on the web runs fine without any problem but
when I run Reports from Forms using RUN_PRODUCT built-in by passing parameters from Forms to Reports it generates this following error: REP-0081-Error During I/O operation and REP-0110: Unable to open file "<<file>>.html" scaba 14.
The strange thing about the REP-0110 is, it refer to a path that is not defined in my registry(FORMS60_OUTPUT,_MAPPING, REPORTS60_PATH,_TMP,_WEBLOC,_WEBLOC_TRANSLATED) and neither my physical directory in the directory mappings which I defined on the web server. (I refer to a the path mindpack4.1 and the REP-0110 refer to mindpack4_1)
Any help appreciated.
Thanks

Hello pals,
i have set the following parameters: TMPDIR and REPORTS60_TMP...
and it seems to be working!!!
i hope that the problem is not somewhere else.
NB. I was having problems with 2 reports only. the others were
working fine.
any comments will be most welcomed.
regards
Yogeeraj

Report Designer - Error when Loading Report

Hi,
We have created a report in Report Designer (7.0) and saved it. When we execute it runs fine. After closing the report and trying to reopen it, the report does not open. It gives an error "Error when Loading Report". Our BI frontend patch is 14.
Did anyone encounter this issue and is there a solution to this.
Thanks
Hemant

Hello,
Please go to SE38 -> RS_REPORT_MAINTAIN,
Type your report name, and DT als "Report Type".
Goto edit mode, copy&paste this XML into txt file and send it to me ([email protected]). I will check whats going on with this report. Loading should be always possible.
Regards, Karol Kalisz, BI Development

Error when email enabling a document library

Hi - I've checked through other threads re errors when email enabling a doc library, but our scenario is a bit different. We have some custom code that creates sites based on a site template and uses data from a 3rd party system to define the site
name, permissions etc. I don't think that the process for creating the sites is relevant to the issue, but mentioning that anyway to be complete. As part of the site creation workflow, one of the document libraries is email enabled. However, on one specific
site, the document library was not email enabled. When I try and do this manually, I get the following error:
Error in the application.   at
Microsoft.SharePoint.SPList.UpdateDirectoryManagementService(String oldAlias,
String newAlias)
   at Microsoft.SharePoint.SPList.Update(Boolean
bFromMigration)
   at Microsoft.SharePoint.SPList.Update()
   at
Microsoft.SharePoint.ApplicationPages.EmailSettingsPage.SubmitButton_Click(Object
sender, EventArgs args)
   at
System.Web.UI.WebControls.Button.OnClick(EventArgs e)
   at
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler
sourceControl, String eventArgument)
   at
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)
Other tests/observations:
On the problem site, I get the same error when trying to email enable other document libraries
Other sites on the same site collection have been created using the same process/site template, and the appropriate document library was email enabled automatically (sites created both before and subsequent to this problem site)
I have successfully managed to manually email enable a document library on an different existing site
I have manually created a new site using the same site template and successfully managed to manually email enable a document library on that site
So I am fairly certain that it is nothing to do with permissions as other posts relating to this issue have suggested. Does anyone have any ideas on what is happening, how to resolve or further checks I can make? Many thanks

Hi qaaweb,
based on my experience, the issue itself may be caused by some triggers,
the permission is one of them only,
to narrow down usually, we try to update credential first, that at some environment may less impact.
example:
based on: http://technet.microsoft.com/en-us/library/cc262947.aspx, to configure email, if already configured then skip.
make sure that application pool account that is used for central admin to be the same for central admin, site and the web application.
make sure SQL server and granted DBCreator , Serveradmin, Setupadmin on service account.
remove old database and sync:
C:\program files\common files\Microsoft shared\web server extensions\12\bin>stsadm -o sync -listolddatabases 0
C:\program files\common files\Microsoft shared\web server extensions\12\bin>stsadm -o sync -deleteolddatabases 0
Update farm credentials, http://support.microsoft.com/kb/934838
if needed: central administration > Operation > Authentication provider and changed Kerberos to NTLM on central admin site.
Login service account on the SharePoint server and enable IncomingEmail settings on the web application
please let us know if the workaround is not applicable
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Error when linking report to stored procedure defined with one input parm

Error when linking report to stored procedure defined with one input parameter
The report will work ok, when the parameter is removed from the stpred procedure
An unhandled win32 exception occurred in crw32.exe[4480]
Stored Proc (sql server 2005)
USE [Allegro]
GO
/****** Object: StoredProcedure [dbo].[SP_Test]    Script Date: 07/08/2009 10:42:14 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[SP_Test](@valuationmode VARCHAR(55)) as
Begin
select
     valuation,
     valuationtime,
     valuationmode
from valuation
where valuationmode = @valuationmode;
End;

This is an example of a stored procedure that is trying to be linked to a new report as the only datasource.
If I remove the parameter I can create a report, however this will return all of the results of thw query to the report, rather than the desired results. If I add the parameter on the Crystal Report, the stored procedure then has to return all of the results to Crystal and then perform the filtering of records. By using a parameter in the stored procedure, you should be able to do all of the filtering as part of the query on the databse server, making this more efficient.

Rep-52005 error when running a report from form with parameter form

I am trying to run a report from a web deployed form and this report has a parameter form. I am getting a Rep-52005: The specified key report does not exist in key map file.
I am using Oracle Forms/Reports 10.1.2.0.2. My code is below. The first part works fine where I run a report with no parameter form, but the second part when I have a parameter form gets the about error.
PROCEDURE call_report (
p_report_name VARCHAR2,
p_reportobj_name VARCHAR2 DEFAULT NULL,
p_parameter_list paramlist DEFAULT NULL,
p_parameter_string VARCHAR2 DEFAULT NULL
IS
repid report_object;
v_rep VARCHAR2 (100);
rep_status VARCHAR2 (100);
v_report_url VARCHAR2 (240);
v_interface VARCHAR2 (50);
v_report_parameter VARCHAR2 (1);
vc_user_name VARCHAR2 (100);
vc_user_password VARCHAR2 (100);
vc_user_connect VARCHAR2 (100);
vc_connect VARCHAR2 (300);
v_reportserv VARCHAR2 (30);
v_job_number number;
BEGIN
/* Get the database to run the report against and
find out if the report has any parameters */
SELECT report_parameter_flag
INTO v_report_parameter
FROM program_list
WHERE program_type = 'REPORTS'
AND UPPER (screen_id) = UPPER (p_report_name);
vc_user_name := get_application_property (username);
vc_user_password := get_application_property (password);
vc_user_connect := get_application_property (connect_string);
v_reportserv := 'rep_xxxx_ias10g_home';
v_report_url := 'http://xxxx.state.il.us';
v_job_number := length(v_reportserv) +2;
vc_connect :=
vc_user_name
|| '/'
|| vc_user_password
|| '@'
|| vc_user_connect;
v_interface := get_application_property (user_interface);
IF ( v_interface = 'WEB'
AND v_report_parameter = 'N'
THEN
repid := find_report_object(p_reportobj_name);
set_report_object_property (repid, report_comm_mode, synchronous);
set_report_object_property (repid, report_destype, cache);
set_report_object_property (repid, report_desformat, 'pdf');
-- v_reportserv := get_report_object_property (repid,report_server);
set_report_object_property (repid, report_server, v_reportserv);
set_report_object_property (repid, report_other, p_parameter_string);
v_rep := run_report_object (repid);
rep_status := report_object_status (v_rep);
IF rep_status = 'FINISHED'
THEN
web.show_document (
v_report_url
|| '/reports/rwservlet/getjobid='
|| substr(v_rep,v_job_number)
|| '?server='
|| v_reportserv
,'_blank'
ELSE
message ( rep_status
|| 'Report output aborted');
END IF;
ELSIF ( v_interface = 'WEB'
AND v_report_parameter = 'Y'
THEN
repid := find_report_object (p_reportobj_name);
set_report_object_property (repid, report_comm_mode, synchronous);
set_report_object_property (repid, report_destype, cache);
set_report_object_property (repid, report_desformat, 'pdf');
set_report_object_property (repid, report_server, v_reportserv);
set_report_object_property (
repid,
report_other,
'paramform=yes P_USER_CONNECT='
|| vc_connect
|| ' P_SERVERNAME='
|| v_reportserv
|| ' P_ACTION='
|| v_report_url
|| '/reports/rwservlet'
v_rep := run_report_object (repid);
rep_status := report_object_status (v_rep);
IF rep_status = 'FINISHED'
THEN
web.show_document (
v_report_url
|| '/reports/rwservlet/getjobid='
|| substr(v_rep,v_job_number)
|| '?server='
|| v_reportserv
,'_blank'
ELSE
message ( rep_status
|| 'Report output aborted');
END IF;
ELSE
run_product (
reports,
p_report_name,
synchronous,
runtime,
filesystem,
p_parameter_list,
NULL
END IF;
EXCEPTION
WHEN OTHERS
THEN
message (SQLERRM);
END;
My parameter form comes up and I enter the necessary information and hit submit query button. Then I get the Rep-52005: The specified key report does not exist in key map file.
Any help will be greatly appreciated!!
Shellie Bricker

Your code seems to be implementing metalink note 139546.1 - Using Reports parameter forms with RUN_REPORT_OBJECT on the web.
For what I can see, the P_ACTION parameter should end in ?...
i.e.
P_ACTION=http://<hostname.domain:port>/reports/rwservlet?'
set_report_object_property (
repid,
report_other,
'paramform=yes P_USER_CONNECT='
|| vc_connect
|| ' P_SERVERNAME='
|| v_reportserv
|| ' P_ACTION='
|| v_report_url
|| '/reports/rwservlet?'
);If this does not fix your problem, then to troubleshoot further you would have to post the code in your Before Parameter Form trigger of your report.
Hope this helps,
UPDATE:
If the above does not fix your problem, my guess is that report name is not being generated in the hidden runtime values build by the code in the Before Parameter Form trigger.
i.e.
http://localhost:8889/reports/rwservlet?report=&destype=cache&desformat=PDF
The above code will throw error REP-52005: The specified key report does not exist in key map file.
Edited by: Rodolfo Ferrari on Jul 8, 2009 9:43 PM

REP-57000 Error When Generating a Report in EXCEL format

Hello All,
We're encountering an error that says "REP-57000: Oracle Reports API - Internal error: Item: oracle.reports.definition.RWReport;Prop:34; Attr: ]] ...".
The report works fine and is able to generate an EXCEL file when it retrieves around 3K records. We only encounter the error when the number of records exceeds 5K.
What is the cause of the error? Additional note, we're using Oracle Reports Server ver.10.1.2.0.2.
Any help would be greatly appeciated. =)

In the reports engine conf file (Example on UAT -> rep_lonshutl5n2_10gr2_forms_reports_service.conf) add JVM Heap Options
jvmOptions="-Xms512m -Xmx512m"
First option is the minimum heap size and second is maximum. The size is in MB and max size can go up to 4000 depending on physical/virtual memory available on Operating System.
Change this Value from 512-2000 and try running your report
In case this doesn't solve your problem, change your output Format to DELIMITEDDATA and try running the reports. There is a bug in Oracle that it doesn't support large excel outputs in DELIMITED format.

Rep-1247 error when starting jsp file on linux

I have a rather frustrating problem on our production servers...
We are trying to start jsp files on a linux report server (10Gr2).
The command is displayed below
[2007/10/8 10:57:59:853] Info 50132 (EngineImpl:setCommandLine): Get command line: baseUrl=http://xxxxx:7777/reports/rwservlet/getfile/ userid=reporting@SHARED_BE USER_AGENT=Java/1.5.0_07 SERVER_NAME=xxxxxxxxx jobname="/opt/ogreports/catalog/SMC/BE-Shared/xxxx.jsp" destpath="/var/data/og/dashboard/van/sgs/001/reports/xx" getFilestr=/no> imagekey=reports9i par_end_date="01-10-2007" desname=xxxxxxxxxxx.pdf REMOTE_ADDR=127.0.0.1 SERVER_PROTOCOL=HTTP/1.1 authid=RWUser par_start_date="01-09-2007" destype=rcpfile REMOTE_HOST=127.0.0.1 SERVER_PORT=7777 CONTENT_TYPE=application/x-www-form-urlencoded report="/opt/ogreports/catalog/SMC/BE-Shared/xxx.jsp" expiredays=0 baseimageurl=http://xxxxx:7777/reports/rwservlet/getfile/HW/YX+JkD0HSAcVLzaSGilrWNAn36ufghgStsvQqfNFC7w== schedule="00:00 Oct 08, 2007" scphost="lion" desformat=pdf SCRIPT_NAME=/rwservlet par_id_project="1750"
The after paramform does some major data manipulations, writing to temporary tables (on commit preserve rows), that are used in queries from the reports.
This seems to go allright. The setup of all queries, program units etc passes as well. But when the report has to start formatting, I get a "1247 Program Unit not compiled" error message. This is an excerpt from the engine trace
[2007/10/8 11:40:40:243] Debug 50103 (EngineImpl:getCacheData): Start
[2007/10/8 11:40:40:243] Debug 50103 (EngineImpl:getCacheData): m_jobId = 9182
[2007/10/8 11:40:40:244] Debug 50103 (EngineImpl:getCacheData): Quit
[2007/10/8 11:40:40:534] Error 50103 (C Engine): 10:40:40 ERR REP-1247: Report contains uncompiled PL/SQL.
[2007/10/8 11:40:40:535] Error 50103 (rwfdt:rwfdtprint): 10:40:40 ERR Error occurred sending Job output to cache
[2007/10/8 11:40:40:536] Error 50103 (rwfdt:rwfdtfl_FreeDistList): running
[2007/10/8 11:40:40:536] Error 50103 (rwfdt:rwfdtfl_FreeDistList): quit
[2007/10/8 11:40:40:580] Debug 50103 (EngineImpl:run): CRunReport returns: 1247
[2007/10/8 11:40:40:608] Debug 50103 (EngineImpl:run): Quit
[2007/10/8 11:40:40:699] Exception 1247 (): Report contains uncompiled PL/SQL.
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.engine.EngineImpl.run(EngineImpl.java:447)
at oracle.reports.engine._EngineClassImplBase._invoke(_EngineClassImplBase.java:90)
at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
I know that 1247 normally covers up another error, but I don't seem to get it....
Funny thing is, when copying the jsp's to another reports server, they do run (on the same DB).
Message was edited by:
user599601

I have a rather frustrating problem on our production servers...
We are trying to start jsp files on a linux report server (10Gr2).
The command is displayed below
[2007/10/8 10:57:59:853] Info 50132 (EngineImpl:setCommandLine): Get command line: baseUrl=http://xxxxx:7777/reports/rwservlet/getfile/ userid=reporting@SHARED_BE USER_AGENT=Java/1.5.0_07 SERVER_NAME=xxxxxxxxx jobname="/opt/ogreports/catalog/SMC/BE-Shared/xxxx.jsp" destpath="/var/data/og/dashboard/van/sgs/001/reports/xx" getFilestr=/no> imagekey=reports9i par_end_date="01-10-2007" desname=xxxxxxxxxxx.pdf REMOTE_ADDR=127.0.0.1 SERVER_PROTOCOL=HTTP/1.1 authid=RWUser par_start_date="01-09-2007" destype=rcpfile REMOTE_HOST=127.0.0.1 SERVER_PORT=7777 CONTENT_TYPE=application/x-www-form-urlencoded report="/opt/ogreports/catalog/SMC/BE-Shared/xxx.jsp" expiredays=0 baseimageurl=http://xxxxx:7777/reports/rwservlet/getfile/HW/YX+JkD0HSAcVLzaSGilrWNAn36ufghgStsvQqfNFC7w== schedule="00:00 Oct 08, 2007" scphost="lion" desformat=pdf SCRIPT_NAME=/rwservlet par_id_project="1750"
The after paramform does some major data manipulations, writing to temporary tables (on commit preserve rows), that are used in queries from the reports.
This seems to go allright. The setup of all queries, program units etc passes as well. But when the report has to start formatting, I get a "1247 Program Unit not compiled" error message. This is an excerpt from the engine trace
[2007/10/8 11:40:40:243] Debug 50103 (EngineImpl:getCacheData): Start
[2007/10/8 11:40:40:243] Debug 50103 (EngineImpl:getCacheData): m_jobId = 9182
[2007/10/8 11:40:40:244] Debug 50103 (EngineImpl:getCacheData): Quit
[2007/10/8 11:40:40:534] Error 50103 (C Engine): 10:40:40 ERR REP-1247: Report contains uncompiled PL/SQL.
[2007/10/8 11:40:40:535] Error 50103 (rwfdt:rwfdtprint): 10:40:40 ERR Error occurred sending Job output to cache
[2007/10/8 11:40:40:536] Error 50103 (rwfdt:rwfdtfl_FreeDistList): running
[2007/10/8 11:40:40:536] Error 50103 (rwfdt:rwfdtfl_FreeDistList): quit
[2007/10/8 11:40:40:580] Debug 50103 (EngineImpl:run): CRunReport returns: 1247
[2007/10/8 11:40:40:608] Debug 50103 (EngineImpl:run): Quit
[2007/10/8 11:40:40:699] Exception 1247 (): Report contains uncompiled PL/SQL.
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.engine.EngineImpl.run(EngineImpl.java:447)
at oracle.reports.engine._EngineClassImplBase._invoke(_EngineClassImplBase.java:90)
at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
I know that 1247 normally covers up another error, but I don't seem to get it....
Funny thing is, when copying the jsp's to another reports server, they do run (on the same DB).
Message was edited by:
user599601

REP-300 Error while running report using App Server

Hi,
I am currently trying to run a report using the Application Server.
This report is being called from a form.
I am able to connect to the report server and all configurations seems to be correct.
But when I execute the report from the form, I am getting error "Unable to run report"
When I look at the error message in the Report Server queue, I find
"REP-300 Table or View does not exist.."
But that table does exist in the database.
What could be be the problem ?
Please help.
The code in the form that calls the report is
report_id := FIND_REPORT_OBJECT( report_name );
vc_user_name:=get_application_property(username);
vc_user_password:=get_application_property(password);
vc_user_connect:=get_application_property(connect_string);
vc_connect:=vc_user_name||'/'||vc_user_password||'@'||vc_user_connect;
SET_REPORT_OBJECT_PROPERTY(report_id ,REPORT_OTHER, 'paramform=yes p_user_connect='||vc_connect ||' p_servername=repsrv'||' p_action=<host>/reports/rwservlet?' );
v_rep := RUN_REPORT_OBJECT(report_id, parmlist_id);

The report is working perfectly fine when I run it from the Report Builder. I get the correct output.
I am getting this error when I try to run the report through a Report server.
I run the form from the Forms 10g builder. This form has a button "Run Report". When I click on the button the report is run using the Report server.
This is when I get the error.
There are other forms that are also called via the same form. Those work fine. The only difference between those forms and this one is that this one has user parameters passed to it. This one also has an attached library attached to it.
The code in the Form to call the report is
report_id := FIND_REPORT_OBJECT( report_name );
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESFORMAT, 'pdf');
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_SERVER, 'rep-vena01-xp');
v_rep := RUN_REPORT_OBJECT(report_id, parmlist_id );
v_jobid := substr( v_rep, length( v_reportserver) + 2, length(v_rep) );
v_repstatus := REPORT_OBJECT_STATUS( v_rep );
IF ( v_repstatus = 'FINISHED' ) THEN
v_url := '/reports/rwservlet/getjobid' || v_jobid || '?server=' || v_reportserver ;
web.show_document( v_url, '_BLANK' );
END IF;

Error when printing reports from forms in Linux

Im having an error when printing a report from a form. The problem is, only with certain forms. when printing a report (to PDF) from other forms, it prints with no problems. The oracle is 10g AS and operating system is Redhat AS 3.
The error, in the log from the reports server is:
[2004/9/7 7:14:59:599] Exception 62204 (): Internal error writing the image BandCombine: a row of the matrix does not have the correct number o
f entries, should be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=62204,
java.lang.String errorString="Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, sh
ould be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..",
java.lang.String moduleName="REP"
at oracle.reports.utility.Utility.newRWException(Utility.java:604)
at oracle.reports.toolkit.image.writer.JPEGImageWriter.writeImage(JPEGImageWriter.java:130)
at oracle.reports.toolkit.image.ImageManager.writeJPEGImage(ImageManager.java:524)
at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
at oracle.reports.engine.EngineImpl.run(EngineImpl.java:353)
at oracle.reports.engine.EngineClassPOATie.run(EngineClassPOATie.java:84)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:117)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)
[2004/9/7 7:14:59:599] Error 50103 (C Engine): 19:14:59 ERR REP-0069: Internal error
REP-62204: Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, should be OpImage.get
ExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
[2004/9/7 7:14:59:600] Error 50103 (C Engine): Error Writing Image, ID 2
[2004/9/7 7:14:59:601] Error 50103 (rwtic:rwticga): Look up for image attributes for image 2
[2004/9/7 7:14:59:602] Error 50103 (rwtic:rwticgi): Looking up for Image, ID 2 in the cache
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Loading the Image into the cache
[2004/9/7 7:14:59:603] Debug 50103 (ImageManager:getImageSource): Retrieving the Image object for ID : 2
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Image successfully loaded into the cache
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageHeight ): Start Height : 155
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageWidth ): Start : width : 138
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageColorSpace ): Start
[2004/9/7 7:14:59:608] Exception 50125 (): Caught exception: java.lang.NullPointerException
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=50125,
If anyone could help me, is important !
Thx in advance
Bruno Santos

Raise a TAR I reckon

Error when exporting reports using MAPI

We created a .NET class that wraps CR 2010 .NET Crystal Reports functions and made it COM visible. This class is used to create a COM object in a js script which in turn used to export reports to a PDF file with the destination MAPI.
It exports reports just fine without any errors however if prior to instantiation the exporting class we instantiate a class that has nothing to do with the Crystal Reports functions, our exporting object throws u201CExternal component has thrown an exception.u201D error when exporting. It appears that it has something to do with the SideBySide feature. I was wondering if somebody knows what causes this and if there is a way to fix this problem.
Thanks for your help!
 
 
Below are 2 procmon.exe outputs, the first when exporting works and the second when it doesnu2019t
 
 
 
1) Procmon.exe output when exporting works fine
 
 
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 7:16:30.7403615 AM test.exe 4396 FASTIO_QUERY_INFORMATION C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Image Base: 0x79260000, Image Size: 0x1073000
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryNameInformationFile, Name: \Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide\PreferExternalManifest NAME NOT FOUND Length: 20
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 
 
 //////////////////////////////////////////////////////////////////////
 2) Procmon.exe output when exporting doesnu2019t work, notice that it tries to open MSO.dll at the same location as in the output above but fails, it tries then to open it at several other locations and fails
 
 
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Users\Paul\projects\temp\test\Debug\MSO.dll FAST IO DISALLOWED
 C:\Users\Paul\projects\temp\test\Debug\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll FAST IO DISALLOWED
 C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\SysWOW64\MSO.dll FAST IO DISALLOWED
 C:\Windows\SysWOW64\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\system\MSO.dll FAST IO DISALLOWED
 C:\Windows\system\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\MSO.dll FAST IO DISALLOWED
 C:\Windows\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a

I tried to run exporting code in a .net application and got the same error. I first created the COM object that causes the problem and then ran exporting CR functions. It works fine if I run the code without creating the COM object.
Below is the code I used.
 Type objClassType = Type.GetTypeFromProgID("ebms.main");
 object objMain = Activator.CreateInstance(objClassType);
 try
 object[] p = new object[4];
 p[0] = "C:\\ebms\\co1";
 p[1] = "C:\\ebms\\co1";
 p[2] = "Administrator";
 p[3] = "";
 objClassType.InvokeMember("LoginToCompany", System.Reflection.BindingFlags.InvokeMethod, null, objMain, p);
 catch (Exception ex)
 this.RPTDoc = new ReportDocument();
 this.RPTDoc.Load(@"C:\\Users\\Paul\\Desktop\\AR Customer List.rpt");
 PdfRtfWordFormatOptions pdfOpts = ExportOptions.CreatePdfRtfWordFormatOptions();
 MicrosoftMailDestinationOptions mailOpts = ExportOptions.CreateMicrosoftMailDestinationOptions();
 ExportOptions exportOpts = new ExportOptions();
 pdfOpts.UsePageRange = false;
 exportOpts.ExportFormatOptions = pdfOpts;
 mailOpts.MailMessage = "something";
 mailOpts.MailSubject = "something";
 mailOpts.MailToList = "emailaddress";
 exportOpts.ExportDestinationOptions = mailOpts;
 exportOpts.ExportDestinationType = ExportDestinationType.MicrosoftMail;
 exportOpts.ExportFormatType = ExportFormatType.PortableDocFormat;
 try
 this.RPTDoc.Export(exportOpts);
 catch (Exception ex)
 MessageBox.Show(ex.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);

REP-0081 error when emailing report output

Similar Messages

Maybe you are looking for