REP-1510 error in matrix report

Hi,
In my matrix report,I need to calculate a column based on the formula columns in other matirx groups.I know the reason for this error.(Formula column in one group should be based on the values in the same group).
But I dnt know how to arrive at the solution without getting data from different groups.
Please suggest me any solution.
Thanks.

What do you mean by "calculate a column based on formula columns in other matrix groups"? Do you want to sum them up? Do the columns have a 1 to 1 ratio with their rows? Can you try to describe your data model better. My hands are tied without knowing the bigger picture.

Similar Messages

Rep-1510 Error

I am running a matrix report whenever I Select "All" in department list it takes long to process then gives me error message "REP-1510 Group Manager unable to compute column 'CS_Net_Sal'
where as it is not a case when I select a particular department !!!!
Is it a Bug ? if yes where can I find the patch ?

Mr. Navneet,
My report Version is Reports 6i, and CS_Net_Sal is a Summary column based on CF_NET_SAL(Function column) below is the function and columns datatypes are number :
(Gross_Salary + Allowances ) - Advances
the design of the report is "Matrix With Group"
as long as I am running department wise there is no problem but if i select "All" departments it shows report progress for 5 minutes then gives me the error message "REP-1510 Group Manager unable to compute column 'CS_Net_Sal" and I dont think the report involves too complex calculation.And if u can tell me please from where can I find the latest patch for reports 6i.
Thanks

REP-0081 error when emailing report output

I am using RUN_REPORT_OBJECT to execute a report from a form. I have the report set up as a Report object in the form. The report runs fine to screen or to file, but I am getting an error when attempting to email report in batch mode:
REP-0081: Error during file I/O operation.
REP-0110: Unable to open file 'mpa02448.pdf'.
scaba 14
Execution Mode = Batch
Report Destination = Mail
Report Destination Name = [email protected]
Report Destination Format = PDF
I am able to send email to the same address via UTL_SMTP directly from the form, so it is not an email handler problem.
Any ideas?

I have verified the latest patches.
Addresses are indeed in Windows address book.
As far as verifying permissions on the file, the file does not exist. It would appear that the error is generated when creating the PDF file, before emailing occurs. Again, however, I do not have problems writing to file directly.
Is there a default directory used when emailing report for file creation? Perhaps the permissions on that directory need to be changed. Please advise.

Imported image error - REP-6106: Error in XML Report Definition

I created a report with an image using Insert/Image. I've tried bmp, gif, jpg. The reports works fine so I save it. When I reopen this file, I get the REP-6106 error message "Invalid element 'image' in content of 'repeatingFrame'. expected elements [comments, geometryinfo...etc.....]".
Any ideas?
Thanks,
Albert

This is a bug, I have filed bug 2546295 to track this.
Thanks for finding this.
-Shaun

REP - 300 Error while executing report from Application

Hi,
I have report in Report Builder & for the same report form is there in Form Builder in which parameter page is designed. From application where I am calling report is internally calling form & in form Procedure Run Report is there which is calling report from Report Builder. Both report from builder & form form Builder are compiled . Also query is executing fine in Toad without error. Also all query fields are present in database.
But when I am trying to excute report from Application it is giving error as "REP - 300 Invalid Identifier " & it displays whole query.
Note - Report & it's Form are in ORACLE - 10g. Also the user through which I am executing report from application is ADMIN user , so it has executing permission.

looks like error in parameters. check out the value of variable that you are passing through to report from form. Put a messages to see variable values before execute report.

REP-300 Error while running report using App Server

Hi,
I am currently trying to run a report using the Application Server.
This report is being called from a form.
I am able to connect to the report server and all configurations seems to be correct.
But when I execute the report from the form, I am getting error "Unable to run report"
When I look at the error message in the Report Server queue, I find
"REP-300 Table or View does not exist.."
But that table does exist in the database.
What could be be the problem ?
Please help.
The code in the form that calls the report is
report_id := FIND_REPORT_OBJECT( report_name );
vc_user_name:=get_application_property(username);
vc_user_password:=get_application_property(password);
vc_user_connect:=get_application_property(connect_string);
vc_connect:=vc_user_name||'/'||vc_user_password||'@'||vc_user_connect;
SET_REPORT_OBJECT_PROPERTY(report_id ,REPORT_OTHER, 'paramform=yes p_user_connect='||vc_connect ||' p_servername=repsrv'||' p_action=<host>/reports/rwservlet?' );
v_rep := RUN_REPORT_OBJECT(report_id, parmlist_id);

The report is working perfectly fine when I run it from the Report Builder. I get the correct output.
I am getting this error when I try to run the report through a Report server.
I run the form from the Forms 10g builder. This form has a button "Run Report". When I click on the button the report is run using the Report server.
This is when I get the error.
There are other forms that are also called via the same form. Those work fine. The only difference between those forms and this one is that this one has user parameters passed to it. This one also has an attached library attached to it.
The code in the Form to call the report is
report_id := FIND_REPORT_OBJECT( report_name );
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESFORMAT, 'pdf');
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_SERVER, 'rep-vena01-xp');
v_rep := RUN_REPORT_OBJECT(report_id, parmlist_id );
v_jobid := substr( v_rep, length( v_reportserver) + 2, length(v_rep) );
v_repstatus := REPORT_OBJECT_STATUS( v_rep );
IF ( v_repstatus = 'FINISHED' ) THEN
v_url := '/reports/rwservlet/getjobid' || v_jobid || '?server=' || v_reportserver ;
web.show_document( v_url, '_BLANK' );
END IF;

REP-1401 error when excuting report

Hi,
I'm running a Report builder report that uses User Parameters and an Oracle stored procedure.
After providing the user parameters the report starts to run for a minute and then returns the message. REP-14-1: 'qr_1refcurds': Fatal PL/SQL error occurred.
Any suggestions on correcting this. The help was no help.
Thanks, Jim

Hi,
As mentioned in the Reports online Help (http://www.oracle.com/technology/products/reports/index.html), this error was caused due to an abnormal condition. Per the Action suggested, may be you would want to first contact your system administrator to determine if the message was caused by something other than Oracle Reports. If you determine that the message was not the result of user error or a system problem, then you can contact Oracle Support Services.

REP-56048 Error while running report

Hi,
While generating output to excel file the report crashed with the following error.
REP-56048: Engine rwEng-0 crashed, job Id: 1081
It however executes fine with PDF. Please suggest a solution.
Report Server Version: (10.1.2.0.2)
Thanks and Regards
Babar Baig

To prevent the error:
REP-1247: Report contains uncompiled PL/SQL
recompile the rdf file on the staging application server. use the following command to recompile it.
rwconverter.sh userid=scott/tiger@test source=sample.rdf batch=yes dtype=rdffile stype=rdffile overwrite=yes
This will takes the source rdf file and recompile it to an rdf file of same format as the operating system of the app server.
For example, if I use reports builder on windows pc to create the rdf file and then move it to a unix box that is hosting the app server. Some reports will get this error for the first time they are run. The subsequent times, they might not get the same error. The above given syntax will prevent this from happening.
I have tried it in my production env and it works like a charm. If you need further help, email me at [email protected]

Page level total in a mulipage matrix report

hi!
I am facing a problem in marix reports because a very late change in customer requirement.he wants a page total at the end of every page in the report ,because these reports are matrix style,they involve cross product.i can get the grand total at the end of the report because the summary column works well at report level,but when i try to reset it at page level,at times it shows blank or generates an error that matrix report fetches everthing at report level and cannot generate results at page level.but now how do i get these page totals without changing these matrix reports.Plz reply ASAP
Regards
simer
The Oracle Reports Team
http://otn.oracle.com/

Hi I was browsing through the forum, and found no reply to your question, if you still interested about the solution I can send you my RDF file where I did the page level total in matrix report as well as brought
forward in next page, this is something very hard for me to explain in word, so if you can give me your email address I can send you the RDF file.
Thanks & Regards
Eamon

REP-51018 + REP-50004 Errors (Urgent)

Hello,
I am working under Oracle 9i iDS on Windows XP Pro.
When I invoke my WebReports from WebForms, I see my Parameter Form that Pops-Up in a new Browser window.
When I hit, the "Submit Query" button, I am prompted to enter the username/password/database information.
I also get a message like:
REP-51018: Need Database User Authentication
I enter the required parameters even though they are already defined by the application code. Then I get an error like:
REP-50004: No Report specified on the command line.
1) Why do I get these errors ?
When I relauch my WebReport from WebForms, it works fine and I can get a WebReports from the WebForms.
2) What is going on ?
PT
PS: I created a generic function called RUN_REPORT_OBJECT_PROC that uses the run_report_object() and web.Show_document built-ins as indicated in:
http://www.oracle.com/technology/products/forms/pdf/10g/frmrepparamform.pdf
PS2: I increased the SESSIONS parameter in the init.ora file and set its value to 9999, but still cannot resolve the issue.
PS3: I get the same REP-51018 error under Forms/Report Services 10g on my Linux box.

Hello,
I used the generic RUN_REPORT_OBJECT_PROC presented in the white paper. The generic procedure makes calls to the run_report_object and the web.show_document built-ins.
The only modification that I have done to this generic function is to add the SYNCHRONIZE keyword before the call to web.show_document built in as was suggested by a technical note on Metalink.
The RUN_REPORT_OBJECT_PROC also makes a call to the ENCODE function which I have also added.
In addition in my WebReports, I added the 3 user parameters: P_ACTIONS, P_SERVER_NAME and P_USER_CONNECT as well as added code to the BeforePForm trigger as indicated in the white paper.
All very straight forward stuff.
On Oracle 9i iDS running under Windows XP Pro, I can generate the Parameter Form then get the REP-51018 followed by the REP-50004 errors when pressing the "Submit" button. If I come back and press the "Reset" button on my Parameter form, I can generate the corresponding WebReport without errors.
These errors occur only the first time that I try to call a WebReport using a Parameter Form from a WebForm.
On the Forms/Reports 10g running on my LinuxServer under iAS, the right hand side Fields for my Parameter Form Parameters are missing, for parameters of type Character + I cannot call-up my WebReports.
YOur feedback is appreciated......
PT
PS: I tried to make modifications to the rwservlet.conf and the repsrv.conf and the rep_Linux2005.conf files without success.

URGENT!!!: REP-51002 ERROR with local installation without network

Hi,
we have a problem with the Oracle Reports Services (10.1.2). We get an REP-51002-Error (Bindung an Reports Server nb-gta nicht möglich).
We have a development environment where all works fine. For presentation purpose we installed the ReportsServices on a laptop. The strange thing:
When we have inserted a network cable to the laptop, all works fine. when we replace the cable, we get the REP-51002-error.
Seems that the ReportServer has a problem when no network card is present (ipconfig shows no network card or IP-Adress when the cable is replaced).
We also tried to modify the SERVER-Variable in the rwservlet.properties (set to localhost and 127.0.0.1), but with no success.
TraceFile of ReportServer reports a "NoRouteToHost"-Exception.
Thanks for help in advance!
Greetings,
Claus

If the host machine is not in a network, then try this (for Windows platform):
Install the MS loopback adapter, as described on the Miscrosoft Web site (http:\\microsoft.support.com). Then, specify an IP address for your machine (either XP or Windows 2000), as follows:
1. On your desktop, rightclick My Network Places, and select Properties.
2. Rightclick the MS loopback adapter, and select Properties.
3. In the Properties dialog box, select Internet Protocol (TCP/IP), and then click on Properties.
4. Select Use the following IP address, and enter a valid IP address. The subnet mask field will automatically populate. Do not use the local host IP (that is, 127.0.0.1). For example, enter: 198.162.1.1.
5. Click OK, and follow the instructions displayed.
Another option is to use naming services, as mentioned in pdevaal's reply.
Message was edited by:
mdey

Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.

Would someone tell what I missed, I have set up the following:
1) a report using report builder on NT
2) my database is in Unix
3) my report server is started in NT
4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job has terminated with error.
Reports Server Replies:
REP-3002: Error initializing printer. Please make sure a printer is installed.
Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
null

It sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
http://hostname:port/cgi-bin/rwcgi60exe?
If you get a help screen, then you should be able to bring up your report.
Regards,
Xiaoling

REP-770 Error while executing the report.

Hi,
I am trying to run a report in Application Server 10g. I am executing this report from a form.
When I try to run the report using the 'rdf', I get the error
"Terminated with error: <br>REP-770: There exist uncompiled program unit(s). REP-1247: Report contains uncompiled PL/SQL."
But if I run the report as 'rep' then the report works fine. Now after this if I run the report as 'rdf', it works fine again.
Just to summarise - The problem occurs if I first try to run the report as rdf. But the problem disappears if I run the report as rep first before running it as rdf.
Could someone help me solve this issue.
Thanks
Aruna

Hi Aruna,
I can see 2 bugs logged on Reports 9.0.4.1 (that means 10g patch 1) that report a similar problem:
BUG 4050488 - JSP REPORTS CONTAINING REF CURSOR ASKS FOR COMPILATION EVERYTIME WITH WEB LAOUT
and
BUG 4040844 - REF CURSOR QUERY REP-737 ORA-1247 RUNNING ON LINUX
Another bug reported on 10g has been fixed in upcoming Reports version 10.1.2:
BUG 3324576 - SRW.APPLY_DEFINITION IN PGM UNIT FAILS USING .REP FILE WITH REP-1457 ERROR
They are published bugs. See if you are hitting the same issue. Though I don't think that these bugs reported REP-1247 only the FIRST time you run the report.
Secondly, when I said "compile on the same platform on which you are going to run", I meant this - if you are going to run the report on OracleAS installed on Win 2000, you must compile the report in Reports Builder on Win 2000. Similarly, if you are going to run the report on OracleAS installed on Linux, you must compile the report in Reports Builder on Linux, before running it.
Navneet.

Reports Builder Error - REP 1070 Error while opening or saving document

Hi,
I tried opening an rdf file in Reports Builder 10g and 6i. I get the REP 1070 error.
Kindly suggest a solution for this.
Thanks,
Anand

Hi,
Edit the system registry and assign REPORTS_PATH then your problem will be cleared.

Rep-52005 error when running a report from form with parameter form

I am trying to run a report from a web deployed form and this report has a parameter form. I am getting a Rep-52005: The specified key report does not exist in key map file.
I am using Oracle Forms/Reports 10.1.2.0.2. My code is below. The first part works fine where I run a report with no parameter form, but the second part when I have a parameter form gets the about error.
PROCEDURE call_report (
p_report_name VARCHAR2,
p_reportobj_name VARCHAR2 DEFAULT NULL,
p_parameter_list paramlist DEFAULT NULL,
p_parameter_string VARCHAR2 DEFAULT NULL
IS
repid report_object;
v_rep VARCHAR2 (100);
rep_status VARCHAR2 (100);
v_report_url VARCHAR2 (240);
v_interface VARCHAR2 (50);
v_report_parameter VARCHAR2 (1);
vc_user_name VARCHAR2 (100);
vc_user_password VARCHAR2 (100);
vc_user_connect VARCHAR2 (100);
vc_connect VARCHAR2 (300);
v_reportserv VARCHAR2 (30);
v_job_number number;
BEGIN
/* Get the database to run the report against and
find out if the report has any parameters */
SELECT report_parameter_flag
INTO v_report_parameter
FROM program_list
WHERE program_type = 'REPORTS'
AND UPPER (screen_id) = UPPER (p_report_name);
vc_user_name := get_application_property (username);
vc_user_password := get_application_property (password);
vc_user_connect := get_application_property (connect_string);
v_reportserv := 'rep_xxxx_ias10g_home';
v_report_url := 'http://xxxx.state.il.us';
v_job_number := length(v_reportserv) +2;
vc_connect :=
vc_user_name
|| '/'
|| vc_user_password
|| '@'
|| vc_user_connect;
v_interface := get_application_property (user_interface);
IF ( v_interface = 'WEB'
AND v_report_parameter = 'N'
THEN
repid := find_report_object(p_reportobj_name);
set_report_object_property (repid, report_comm_mode, synchronous);
set_report_object_property (repid, report_destype, cache);
set_report_object_property (repid, report_desformat, 'pdf');
-- v_reportserv := get_report_object_property (repid,report_server);
set_report_object_property (repid, report_server, v_reportserv);
set_report_object_property (repid, report_other, p_parameter_string);
v_rep := run_report_object (repid);
rep_status := report_object_status (v_rep);
IF rep_status = 'FINISHED'
THEN
web.show_document (
v_report_url
|| '/reports/rwservlet/getjobid='
|| substr(v_rep,v_job_number)
|| '?server='
|| v_reportserv
,'_blank'
ELSE
message ( rep_status
|| 'Report output aborted');
END IF;
ELSIF ( v_interface = 'WEB'
AND v_report_parameter = 'Y'
THEN
repid := find_report_object (p_reportobj_name);
set_report_object_property (repid, report_comm_mode, synchronous);
set_report_object_property (repid, report_destype, cache);
set_report_object_property (repid, report_desformat, 'pdf');
set_report_object_property (repid, report_server, v_reportserv);
set_report_object_property (
repid,
report_other,
'paramform=yes P_USER_CONNECT='
|| vc_connect
|| ' P_SERVERNAME='
|| v_reportserv
|| ' P_ACTION='
|| v_report_url
|| '/reports/rwservlet'
v_rep := run_report_object (repid);
rep_status := report_object_status (v_rep);
IF rep_status = 'FINISHED'
THEN
web.show_document (
v_report_url
|| '/reports/rwservlet/getjobid='
|| substr(v_rep,v_job_number)
|| '?server='
|| v_reportserv
,'_blank'
ELSE
message ( rep_status
|| 'Report output aborted');
END IF;
ELSE
run_product (
reports,
p_report_name,
synchronous,
runtime,
filesystem,
p_parameter_list,
NULL
END IF;
EXCEPTION
WHEN OTHERS
THEN
message (SQLERRM);
END;
My parameter form comes up and I enter the necessary information and hit submit query button. Then I get the Rep-52005: The specified key report does not exist in key map file.
Any help will be greatly appreciated!!
Shellie Bricker

Your code seems to be implementing metalink note 139546.1 - Using Reports parameter forms with RUN_REPORT_OBJECT on the web.
For what I can see, the P_ACTION parameter should end in ?...
i.e.
P_ACTION=http://<hostname.domain:port>/reports/rwservlet?'
set_report_object_property (
repid,
report_other,
'paramform=yes P_USER_CONNECT='
|| vc_connect
|| ' P_SERVERNAME='
|| v_reportserv
|| ' P_ACTION='
|| v_report_url
|| '/reports/rwservlet?'
);If this does not fix your problem, then to troubleshoot further you would have to post the code in your Before Parameter Form trigger of your report.
Hope this helps,
UPDATE:
If the above does not fix your problem, my guess is that report name is not being generated in the hidden runtime values build by the code in the Before Parameter Form trigger.
i.e.
http://localhost:8889/reports/rwservlet?report=&destype=cache&desformat=PDF
The above code will throw error REP-52005: The specified key report does not exist in key map file.
Edited by: Rodolfo Ferrari on Jul 8, 2009 9:43 PM

REP-1510 error in matrix report

Similar Messages

Maybe you are looking for