REP-50125 ERROR

Hi,
I am getting the following error,
"Cannot Kill Job with Job ID 388REP-50125: Caught exception: org.omg.COBRA.UNKNOWN: minor code: 0 Completed: No"
when i want to kill a job that is not responding to my process. In fact this job is stopping all my other activities, and it is causing me a big problem since i am have to close restart my OC4J instance in order to kill such jobs, and this repeats.
Please Let me Know how can i kill the process other than shutting down OC4J Instance

We're having the same problem here... Any suggestions about this? Thanks!
Hi,
I am getting the following error,
"Cannot Kill Job with Job ID 388REP-50125: Caught
exception: org.omg.COBRA.UNKNOWN: minor code: 0
Completed: No"
when i want to kill a job that is not responding to
my process. In fact this job is stopping all my other
activities, and it is causing me a big problem since
i am have to close restart my OC4J instance in order
to kill such jobs, and this repeats.
Please Let me Know how can i kill the process other
than shutting down OC4J Instance

Similar Messages

Error REP-51002; REP-50125 and REP-56048

Hello All,
We are upgrading our Forms/Reports environment to 11.1.2.0.0. For report server setup we have done following:
1) Setup a new VM with 2008 Windows Server R2 64 bit operating system
2) Installed Oracle Reports Server 11.1.2.0.0
3) Pointed our new Forms Server (which is also 11.1.2.0.0) to use this new report server.
Normally reports work fine, but at times it results in error. At times with error it brings the whole report server down as well.
In the Enterprise Manager it shows following log messages:
Dec-13 3:44:01 (Incident Error) REP-51002 : Bind to Reports Server willow_reports_qa1 failed.
Dec-13 3:44:01 (Incident Error) ServerManager:getServer Bind to Reports Server willow_reports_qa1 failed.
Dec-13 3:48:20 (Incident Error) REP-50125 : org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 208 completed: Maybe
Dec-13 3:48:21 (Incident Error) REP-50125 : org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
Dec-13 3:48:21 (Incident Error) REP-56048 : Engine rwEng-0 crashed., job Id: 327
Dec-13 3:48:21 (Incident Error) REP-56048 : Engine rwEng-0 crashed., job Id: 327
Any help will be highly appreciated. Let me know if you need additional information.
Regards,
Saket Maheshwary

question. Did you solve this? If so was it because you firstly needed to create a Report Server and register it with Enterprise Manager?
Pamela

Reports 11g: REP-50125: rwbuilder.conf:java.lang.NullPointerException

Hello all,
Please excuse my being too detailed.
After installing Forms 11g, Reports 11g in a new Windows 7 Professional 64bit machine, I was able to run both the Forms Builder and Reports Builder.
I then moved my forms and reports into a different folder, updated the FORMS_PATH and REPORTS_PATH in the registry, and added a key into keymap file:
C:\Oracle\Forms\user_projects\domains\ClassicDomain\config\fmwconfig\servers\WLS_REPORTS\applications\reports_11.1.1.2.0\configuration\cgicmd.dat
that allows hiding userid and password when calling up reports.
I then made a change to the following file:
C:\Oracle\Forms\user_projects\domains\ClassicDomain\config\fmwconfig\servers\WLS_REPORTS\applications\reports_11.1.1.2.0\configuration\rwservlet.properties
by adding the following line to force reload keymap:
<reloadkeymap>yes</reloadkeymap>
Having done that, I could call up reports from remote clients. Unfortunately, now I cannot run the Reports Builder.
Each time I tried, I would see a splash screen, then the usual process in task bar. But no builder appeared.
Right-clicking the process and selecting running the builder will produce a popup dialog declaring:
"REP-50125: rwbuilder.conf:java.lang.NullPointerException"
I have restarted the computer, restarting the Admin Server, Reports Server, etc., to no avail.
If I were to rename the rwbuilder.conf away, the Reports Builder will hang at the splash screen.
The shortcut I used to run the Reports Builder is:
C:\Oracle\Forms\asinst_1\config\reports\bin\rwbuilder.bat
The path to the rwbuilder.conf file is:
C:\Oracle\Forms\asinst_1\config\ReportsToolsComponent\ReportsTools\rwbuilder.conf
and its contents, which has never been modified since installation, follow:
<?xml version = '1.0' encoding = 'UTF-8'?>
<server xmlns="http://xmlns.oracle.com/reports/server" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/reports/server file:C:\Oracle\Forms\as_1/reports/dtd/rwserverconf.xsd" version="11.1.1.3.0">
<cache class="oracle.reports.cache.RWCache">
<property name="cacheSize" value="50"/>


</cache>


<engine id="rwEng" class="oracle.reports.engine.EngineImpl" maxEngine="1" minEngine="0" engLife="50">



</engine>
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" maxEngine="1" minEngine="0" engLife="50"/>



<destination destype="ftp" class="oracle.reports.plugin.destination.ftp.DesFTP"/>
<destination destype="WebDav" class="oracle.reports.plugin.destination.webdav.DesWebDAV"/>
<job jobType="report" engineId="rwEng" securityId="rwJaznSec"/>
<job jobType="rwurl" engineId="rwURLEng"/>
<notification id="mailNotify" class="oracle.reports.server.MailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>


<connection maxConnect="50" idleTimeOut="15">
</connection>
<queue maxQueueSize="1000"/>

<pluginParam name="mailServer" value="%MAILSERVER_NAME%">

</pluginParam>
<webLayout port="9002" docroot="C:\Oracle\Forms\user_projects\domains\ClassicDomain\servers\WLS_REPORTS\tmp\_WL_user\reports_11.1.1.2.0\uqanoi\war"/>
</server>
Will really appreciate any help!
Thank you.
Jacob

Hi,
This looks like it might be related to bug 6358304.
Go to My Oracle Support site (Metalink) Patchs & Updates tab. Then search for 6358304.
There is a patch downloadable for this which worked for me though I was getting the error when running reports via the server and not through starting reports builder.
However if you search the Knowledge base for 6358304 there is a work around available by editing the cgicmd.dat - specifically by adding a space at the end of the key you added to the file:
1. In the cgicmd.dat file, add a space at the end of the key line.
for example:
my_key: userid=hr/hr@oradb %* %P <--< add a space after the "P".
2. Additional workaround is to change from :
%* %P
to:
%P %*
Hope that works for you, otherwise I would recommend raising a support request with Oracle.
Cheers,
Toby.

Urgent Issue:Err-REP-50125 : java.lang.ClassNotFoundException - 11.1.1.3.0

I'm trying to use custom destination with oracle fusion middleware 11.1.1.3.0 In-Process report server. I have added a custom destination section in the rwserver.conf file. Added the (customdest.jar - my jar file) jar file to the system classpath and reports_classpath. Still receiving class not found error.
Here are the details:
rwserver.conf:/opt/oracle/Middleware/user_projects/domains/ReportsDomain/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/rwserver.conf
<?xml version = '1.0' encoding = 'UTF-8'?>
<server xmlns="http://xmlns.oracle.com/reports/server" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="11.1.1.2.0" xsi:schemaLocation="http://xmlns.oracle.com/reports/server file:/opt/oracle/Middleware/as_1/reports/dtd/rwserverconf.xsd">
<cache class="oracle.reports.cache.RWCache">
<property name="cacheSize" value="50"/>


</cache>


*<engine class="oracle.reports.engine.EngineImpl" engLife="50" id="rwEng" maxEngine="1" minEngine="1" jvmOptions="-Xmx512M" classPath="/opt/oracle/Middleware/as_1/jlib/jsp-api-2.1-6.0.1.jar:/opt/oracle/Middleware/as_1/jlib/jsch-0.1.26.jar:/opt/oracle/Middleware/as_1/reports/jlib/customdest.jar">*
<property name="sourceDir" value="/opt/ogreports/catalog:/opt/ogreports/catalog/img"/>


</engine>
<engine class="oracle.reports.urlengine.URLEngineImpl" engLife="50" id="rwURLEng" maxEngine="1" minEngine="0" classPath="/opt/oracle/Middleware/as_1/jlib/jsp-api-2.1-6.0.1.jar:/opt/oracle/Middleware/as_1/jlib/jsch-0.1.26.jar:/opt/oracle/Middleware/as_1/reports/jlib/customdest.jar"/>
<security class="oracle.reports.server.RWJAZNSecurity" id="rwJaznSec"/>

<destination class="oracle.reports.plugin.destination.ftp.DesFTP" destype="ftp"/>
<destination class="oracle.reports.plugin.destination.webdav.DesWebDAV" destype="WebDav"/>
*<destination destype="rcpfile" class="com.ubizen.og.offline.reporting.oracle.RcpDestination">*
*<property name="user" value="tomcat"/>*
*<property name="destype" value="rcpfile"/>*
*</destination>*
<job engineId="rwEng" jobType="report"/>
<job engineId="rwURLEng" jobType="rwurl"/>
<notification class="oracle.reports.server.MailNotify" id="mailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>
Error:/opt/oracle/Middleware/user_projects/domains/ReportsDomain/servers/WLS_REPORTS/logs/reports/rwserver_diagnostic.log
[2011-09-29T10:52:26.871-04:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [tid: 46] [userId: <anonymous>] [ecid: 0000JApf0iF9XbpSoQjc4m1EOGV800001d,1:18769] [APP: reports#11.1.1.2.0] [dcid: fa0c1bc817f5aeb4:-3e9d1a3b:1322b067681:-7fff-000000000000876f] REP-50125 : java.lang.ClassNotFoundException: com.ubizen.og.offline.reporting.oracle.RcpDestination [[
java.lang.ClassNotFoundException: com.ubizen.og.offline.reporting.oracle.RcpDestination
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:169)
at oracle.reports.server.Destination.invokeShutdown(Destination.java:492)
at oracle.reports.server.Destination.shutdownDest(Destination.java:125)
at oracle.reports.server.RWServer.shutdown(RWServer.java:463)
at oracle.reports.server.RWServer.run(RWServer.java:364)
at java.lang.Thread.run(Thread.java:662)
ClassPath:.:/opt/oracle/Middleware/as_1/jlib:/opt/oracle/Middleware/as_1/reports/jlib
File in classpath: /opt/oracle/Middleware/as_1/reports/jlib
aolj.jar customdest.jar rwadmin.jar rwenv.jar rwxdo.jar
confmbean.jar runtimembean.jar rwbuilder.jar rwrun.jar
Relates to Oracle Bug:
https://support.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(viewingMode=1143&from=BOOKMARK&bmDocTitle=Can%20Not%20Find%20Class%20From%20Custom%20Destinations%20Jar%20File%20-%20REP-50125%20:%20java.lang.ClassNotFoundException&bmDocID=1263455.1&bmDocType=PROBLEM&bmDocDsrc=KB))
Note:
I'm not sure where the In-Process report server is looking for the classpath. I added them in all possible classpaths ans none of them worked.
This is an urgent issue in our team. We are migrating from 10g oracle application server to fusion middleware 11g report server. This functionality is working in 10g report server but not in 11g due to classpath issues.
Please let me know if additional info needed. Please respond.

Hi,
Thanks very much for responding. I added my jar file(customdest.jar) as you have suggested to setDomainEnv.sh. Now the In-Process report server just hangs when I try to bring it up through em and I don't see any errors in the log files. Any ideas where to look for errors? The jar files were created for 10g , we are just migrating them to 11g. I have setup the trace at highest level still don't see any error in rwserver_diagnostic.log.
Here is the details:
/opt/oracle/Middleware/user_projects/domains/ReportsDomain/bin/setDomainEnv.sh :
if [ "${SERVER_NAME}" = "WLS_REPORTS" ] ; then
POST_CLASSPATH="/opt/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/opt/oracle/Middleware/as_1/opmn/lib/nonj2eembeans.jar:/opt/oracle/Middleware/as_1/jdbc/lib/ojdbc6.jar:/opt/oracle/Middleware/as_1/opmn/lib/optic.jar:/opt/oracle/Middleware/as_1/opmn/lib/iasprovision.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.adf.share_11.1.1/commons-el.jar:/opt/oracle/Middleware/as_1/jlib/dfc.jar:/opt/oracle/Middleware/as_1/dvt/lib/dvt-jclient.jar:/opt/oracle/Middleware/as_1/dvt/lib/dvt-utils.jar:/opt/oracle/Middleware/oracle_common/jlib/ewt3.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.iau_11.1.1/fmw_audit.jar:/opt/oracle/Middleware/as_1/oui/jlib/http_client.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.idm_11.1.1/identitystore.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.idm_11.1.1/identityutils.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1/jaccprovider.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.jps_11.1.1/jacc-spi.jar:/opt/oracle/Middleware/as_1/ord/jlib/jai_codec.jar:/opt/oracle/Middleware/as_1/ord/jlib/jai_core.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.oc4j-obsolete_11.1.1/jazn.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.oc4j-obsolete_11.1.1/jazncore.jar:/opt/oracle/Middleware/oracle_common/jlib/jewt4.jar:/opt/oracle/Middleware/as_1/jlib/jta.jar:/opt/oracle/Middleware/oracle_common/modules/oracle.ldap_11.1.1/ldapjclnt11.jar:/opt/oracle/Middleware/as_1/lib/mail.jar:/opt/oracle/Middleware/as_1/jlib/netcfg.jar:/opt/oracle/Middleware/as_1/jlib/oracle_ice.jar:/opt/oracle/Middleware/oracle_common/jlib/share.jar:/opt/oracle/Middleware/as_1/jlib/zrclient.jar:/opt/oracle/Middleware/as_1/reports/jlib/aolj.jar:/opt/oracle/Middleware/as_1/reports/jlib/confmbean.jar:/opt/oracle/Middleware/as_1/reports/jlib/runtimembean.jar:/opt/oracle/Middleware/as_1/reports/jlib/rwadmin.jar:/opt/oracle/Middleware/as_1/reports/jlib/rwbuilder.jar:/opt/oracle/Middleware/as_1/reports/jlib/rwenv.jar:/opt/oracle/Middleware/as_1/reports/jlib/rwrun.jar:/opt/oracle/Middleware/as_1/reports/jlib/rwxdo.jar:/opt/oracle/Middleware/as_1/jlib/rts2.jar:*/opt/oracle/Middleware/as_1/reports/jlib/customdest.jar*:${CLASSPATHSEP}${POST_CLASSPATH}"
export POST_CLASSPATH
Log file: rwserver_diagnostic.log
/opt/oracle/Middleware/user_projects/domains/ReportsDomain/servers/WLS_REPORTS/logs/reports
<destination class="oracle.reports.plugin.destination.ftp.DesFTP" destype="ftp"/>
<destination class="oracle.reports.plugin.destination.webdav.DesWebDAV" destype="WebDav"/>
<destination destype="rcpfile" class="com.ubizen.og.offline.reporting.oracle.RcpDestination">
<property name="user" value="tomcat"/>
<property name="destype" value="rcpfile"/>
</destination>
<job engineId="rwEng" jobType="report"/>
<job engineId="rwURLEng" jobType="rwurl"/>
<notification class="oracle.reports.server.MailNotify" id="mailNotify">
<property name="succnotefile" value="succnote.txt"/>
<property name="failnotefile" value="failnote.txt"/>
</notification>


<connection idleTimeOut="15" maxConnect="50"/>
<queue maxQueueSize="1000"/>

<pluginParam name="mailServer" value="%MAILSERVER_NAME%">




</pluginParam>
</server>
[2011-10-02T23:31:51.431-04:00] [WLS_REPORTS] [TRACE:32] [REP-56025] [oracle.reports.server] [tid: 22] [userId: weblogic] [ecid: 0000JB7par79XbpSoQjc4m1EYIaI00000F,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [APP: reports#11.1.1.2.0] [dcid: fa0c1bc817f5aeb4:7b3253ab:132c7c7f2e9:-8000-00000000000000fa] [SRC_METHOD: writeln] RWServer:startServer Reports Server is starting up.
[2011-10-02T23:31:51.435-04:00] [WLS_REPORTS] [TRACE:16] [] [oracle.reports.server] [tid: 22] [userId: weblogic] [ecid: 0000JB7par79XbpSoQjc4m1EYIaI00000F,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [APP: reports#11.1.1.2.0] [dcid: fa0c1bc817f5aeb4:7b3253ab:132c7c7f2e9:-8000-00000000000000fa] [SRC_METHOD: writeln] Multicast:registerReceiver Packet handler registered
[2011-10-02T23:31:51.435-04:00] [WLS_REPORTS] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 22] [userId: weblogic] [ecid: 0000JB7par79XbpSoQjc4m1EYIaI00000F,0] [APP: reports#11.1.1.2.0] [dcid: fa0c1bc817f5aeb4:7b3253ab:132c7c7f2e9:-8000-00000000000000fa] ServerPacketHandler:start ServerPacketHandler started successfully
[2011-10-02T23:31:51.441-04:00] [WLS_REPORTS] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 22] [userId: weblogic] [ecid: 0000JB7par79XbpSoQjc4m1EYIaI00000F,0] [APP: reports#11.1.1.2.0] [dcid: fa0c1bc817f5aeb4:7b3253ab:132c7c7f2e9:-8000-00000000000000fa] SecurityHelper:start Security system rwJaznSec successfully started.
No more error logged after this line. but in-process server just hung up indefinitely when I tried stating via the em and also via getserverinfo URL.
In rwserver.conf: I have defined the following for custom destination
/opt/oracle/Middleware/user_projects/domains/Repdomain/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/rwserver.conf
<destination destype="rcpfile" class="com.ubizen.og.offline.reporting.oracle.RcpDestination">
<property name="user" value="tomcat"/>
<property name="destype" value="rcpfile"/>
</destination>

REP-50125: Caught exception: org.omg.CORBA.OBJECT_NOT_EXIST: minor code:

i have a problem with the users who request a report, the following error appears
REP-50125: Caught exception: org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
i don have any idea, what it's mean. and sometimes only appears in some users, and others can execute the reports ok.
please really i need some help

Juan, we are having the same problem, and my cluster of 2 servers 9.0.2.2.
I was explained by support, and they were explained by developers that this error is caused by the NULL instead of 0 returned parameter, when no engine available.
This means if you hit refresh long enough it will work.
I personally found this error happens when server's content in cluster is not in synch and just could not explain some other situations, our TAR is still open.
Let me know where are you on this issue

REP-50125 java.lang.RuntimeException

Hi Oracle people,
I have a problem. I have all my services up, except for the in-process reports server. I can't start it for nothing. I was now trying to install a new rep server with the command rwserver.sh -install server=RepSrv02 and i got this error "REP-50125 java.lang.RuntimeException: Error reading reports server logging configuration".
I can't find anything about this error. Any ideas? I could really aprecciate some help as i'm getting desperate.
Thank you

yes.
export DISPLAY=ip adrees:0.0
xhost +
and make sure you are able to invoke xclock .
Rajesh Alex

"REP-50125: rwbuilder.conf:java.lang.NullPointerException

when i try to to launch Reports Builder 11g in Windows 7 (32-bit or 64-bit), the Reports Builder is not launching. However, the icon for it appears in the Windows taskbar. Opening it presents the error:
“REP-50125: rwbuilder.conf:java.lang.NullPointerException am in oracle report 11gR2

Hello:
I always do this:
Edit file C:\Oracle\Middleware\Oracle_FRHome1\bin\rwbuilder.bat
Replace: "$$Instance.directory$$" by: "C:\Oracle\Middleware\asinst_1"
Replace: "$$Instance.oracle_home$$" by: "C:\Oracle\Middleware\Oracle_FRHome1"
Now, you can run reports builder executing rwbuilder.bat perfecty.
Optionally: I edit C:\Oracle\Middleware\asinst_1\config\reports\bin\reports.bat file, and remove TNS_ADMIN file. I prefer generate a cmd file to start rwbuilder.bat with a previous set TNS_ADMIN variable:
my startRwbuilderf11g.cmd:
SET CLASSPATH=C:\Oracle\Middleware\Oracle_FRHome1\forms\j2ee\frmsrv.jar;C:\Oracle\Middleware\Oracle_FRHome1\jlib\ldapjclnt11.jar;C:\Oracle\Middleware\Oracle_FRHome1\jlib\debugger.jar;C:\Oracle\Middleware\Oracle_FRHome1\jlib\ewt3.jar;C:\Oracle\Middleware\Oracle_FRHome1\jlib\share.jar;C:\Oracle\Middleware\Oracle_FRHome1\jlib\utj.jar;C:\Oracle\Middleware\Oracle_FRHome1\jlib\zrclient.jar;C:\Oracle\Middleware\Oracle_FRHome1\reports\jlib\rwrun.jar;C:\Oracle\Middleware\Oracle_FRHome1\forms\java\frmwebutil.jar;C:\Oracle\Middleware\Oracle_FRHome1/jlib/start_dejvm.jar;C:\Oracle\Middleware\Oracle_FRHome1\opmn\lib\optic.jar
SET PATH=C:\Oracle\Middleware\Oracle_FRHome1\bin;C:\Oracle\Middleware\Oracle_FRHome1\jdk\jre\bin\client;C:\Oracle\Middleware\Oracle_FRHome1\jdk\bin
SET REPORTS_PATH=Z:\plls
SET NLS_DATE_FORMAT=DD/MM/YYYY
SET NLS_NUMERIC_CHARACTERS=,.
SET UI_ICON=Z:\iconos
SET NLS_SORT=BINARY
SET TNS_ADMIN=C:\Oracle
SET NLS_LANG=SPANISH_SPAIN.UTF8
start rwbuilder.bat USERID=USUARIO/PASSWORD@CADENA_CONEXION
Regards,

Report Server Failed To Start : REP-50125: org.omg.CORBA.INTERNAL:

Hi all,
I try to start my in process report server as below and it shows REP-50102 error as below :
[oracle@icbadev ~]$ rwserver.sh server=rep_icbadev
REP-50125: org.omg.CORBA.INTERNAL: vmcid: SUN minor code: 208 completed: No
[oracle@icbadev ~]$
[oracle@icbadev ~]$ rwdiag.sh -findAll; rwclient.sh server=rep_icbadev report=test destype=cache
Naming service used to locate servers
Naming Server host = icbadev.smebank.net
Naming Server port = 14021
Exception in thread "main" org.omg.CORBA.INTERNAL: vmcid: SUN minor code: 208 completed: No
at com.sun.corba.se.internal.corba.ORB.getLocalHostName(ORB.java:924)
at com.sun.corba.se.internal.corba.ORB.checkApplicationPropertyDefaults(ORB.java:888)
at com.sun.corba.se.internal.corba.ORB.set_parameters(ORB.java:457)
at com.sun.corba.se.internal.POA.POAORB.set_parameters(POAORB.java:153)
at com.sun.corba.se.internal.Interceptors.PIORB.set_parameters(PIORB.java:333)
at org.omg.CORBA.ORB.init(ORB.java:337)
at oracle.reports.utility.DiagServerLocator.readConfigFile(DiagServerLocator.java:138)
at oracle.reports.utility.DiagServerLocator.init(DiagServerLocator.java:90)
at oracle.reports.utility.DiagServerLocator.locateServer(DiagServerLocator.java:154)
at oracle.reports.utility.DiagServerLocator.handleRequest(DiagServerLocator.java:546)
at oracle.reports.utility.DiagServerLocator.main(DiagServerLocator.java:566)
REP-0178: Cannot connect to Reports Server 'rep_icbadev'.
[oracle@icbadev ~]$
Anyone ever encounter the same problem with mine. Appreciate if someone could help me with this.
The Forms and Reports Services 10.1.2.2.0 was installed on RHEL 4 Update 6 on HP Proliant box.
Any kind of help are highly appreciated.
Thank you.

Found something during my search as follow eventhough it was refering to AIX platform:
<variable id="IBM_JAVA_OPTIONS" value="-Djava.net.preferIPv4Stack=true"/>
I try to put above line into opmn.xml as below and try to start report server via opmnctl command line, still not a good news.
<ias-component id="rep_dev" status="enabled" id-matching="false">
<process-type id="ReportsServer" module-id="ReportsServices">
<process-set id="rep_dev" restart-on-death="true" numprocs="1">
<environment>
<variable id="PATH"
value="/usr/oracle/10gAS/apps1/bin:/usr/bin:/usr/ccs/bin:/bin:/usr/oracle/10gAS/apps1/bin:/usr/orac
e/10gAS/apps1/dcm/bin:/usr/oracle/10gAS/apps1/opmn/bin:/usr/ccs/bin:/usr/bin/X11:/usr/bin:/etc:/usr
sbin:/usr/ucb:/home/oracle/bin:/sbin:.:/oraclbackup/GFRS/Disk1/install"/>
<variable id="IBM_JAVA_OPTIONS" value="-Djava.net.preferIPv4Stack=true"/>
</environment>
<module-data>
some info on java installed:
[root@icbadev ~]# whereis java
java: /usr/bin/java /etc/java /usr/lib/java /usr/share/java
[root@icbadev ~]# java -version
java version "1.4.2"
gcj (GCC) 3.4.6 20060404 (Red Hat 3.4.6-9)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
[root@icbadev ~]#
Any kind of help are highly appreciated.

Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.

Would someone tell what I missed, I have set up the following:
1) a report using report builder on NT
2) my database is in Unix
3) my report server is started in NT
4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job has terminated with error.
Reports Server Replies:
REP-3002: Error initializing printer. Please make sure a printer is installed.
Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
null

It sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
http://hostname:port/cgi-bin/rwcgi60exe?
If you get a help screen, then you should be able to bring up your report.
Regards,
Xiaoling

REP-770 Error while executing the report.

Hi,
I am trying to run a report in Application Server 10g. I am executing this report from a form.
When I try to run the report using the 'rdf', I get the error
"Terminated with error: <br>REP-770: There exist uncompiled program unit(s). REP-1247: Report contains uncompiled PL/SQL."
But if I run the report as 'rep' then the report works fine. Now after this if I run the report as 'rdf', it works fine again.
Just to summarise - The problem occurs if I first try to run the report as rdf. But the problem disappears if I run the report as rep first before running it as rdf.
Could someone help me solve this issue.
Thanks
Aruna

Hi Aruna,
I can see 2 bugs logged on Reports 9.0.4.1 (that means 10g patch 1) that report a similar problem:
BUG 4050488 - JSP REPORTS CONTAINING REF CURSOR ASKS FOR COMPILATION EVERYTIME WITH WEB LAOUT
and
BUG 4040844 - REF CURSOR QUERY REP-737 ORA-1247 RUNNING ON LINUX
Another bug reported on 10g has been fixed in upcoming Reports version 10.1.2:
BUG 3324576 - SRW.APPLY_DEFINITION IN PGM UNIT FAILS USING .REP FILE WITH REP-1457 ERROR
They are published bugs. See if you are hitting the same issue. Though I don't think that these bugs reported REP-1247 only the FIRST time you run the report.
Secondly, when I said "compile on the same platform on which you are going to run", I meant this - if you are going to run the report on OracleAS installed on Win 2000, you must compile the report in Reports Builder on Win 2000. Similarly, if you are going to run the report on OracleAS installed on Linux, you must compile the report in Reports Builder on Linux, before running it.
Navneet.

Reports Builder Error - REP 1070 Error while opening or saving document

Hi,
I tried opening an rdf file in Reports Builder 10g and 6i. I get the REP 1070 error.
Kindly suggest a solution for this.
Thanks,
Anand

Hi,
Edit the system registry and assign REPORTS_PATH then your problem will be cleared.

REP-3002: Error initializing printer

Hello,
This is my configuraton:
Computer 1 : nt4, sp3, installed: Oracledatabase 7.3.4
Computer 2 : nt4, sp3, installed: Oracle WebDb, forms 6i, formserver 6i and reports 6i.
Services WebDb and Listener are running.
I've connected an HP LaserJet III to the parallel port of computer 2. In the printer
control panel of NT4, this printer is set as the 'default' printer.
'myform.fmx' is a simple form.
The code consists only of a 'when-button-pressed' trigger as follows:
declare
pl paramlist;Ln varchar(15) :='Elsa';
BEGIN
pl :=get_parameter_list(Ln);
if not id_null(pl) then destroy_parameter_list(pl);end if;
pl :=create_parameter_list('Elsa');
add_parameter(pl,'DESTYPE', text_parameter,'PRINTER');
run_product(REPORTS,'C:\ORANT\REPORT60\myrep.rep',1,BATCH,FILESYSTEM,pl);
destroy_parameter_list(pl);
END;
'myrep.rep' is a simple report, consisting of:
select user from dual;
generated by the wizard.
When I run the form in preview for the web in formbuilder 6i, then it works very well,
it prints my report.
But when I run it from the cgi 'ifcgi60.exe' by the command
start -> programs -> oracle forms 6i -> run a form on the web
it returns
http://pent2.easyware.be/dev60cgi/ifcgi60.exe?
form=myform.fmx&userid=&otherparams=useSDI=yes&
lookAndFeel=generic&colorScheme=teal
then the error returned in the webbrowser is
'REP-3002: Error initializing printer. Please make sure a printer is installed.'
if parameter 'DESTYPE' is set to 'SCREEN' then it works very well, I can print by clicking the print icon.
Please can someone help me.
Best Regards,
Carl Willems.
[email protected]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by aapmens ():
Hello,
This is my configuraton:
Computer 1 : nt4, sp3, installed: Oracledatabase 7.3.4
Computer 2 : nt4, sp3, installed: Oracle WebDb, forms 6i 6.0.8.8.0, formserver 6i and reports 6i 6.0.8.8.3.
Services WebDb and Listener are running.
I've connected an HP LaserJet III to the parallel port of computer 2. In the printer
control panel of NT4, this printer is set as the 'default' printer.
'myform.fmx' is a simple form.
The code consists only of a 'when-button-pressed' trigger as follows:
declare
pl paramlist;Ln varchar(15) :='Elsa';
BEGIN
pl :=get_parameter_list(Ln);
if not id_null(pl) then destroy_parameter_list(pl);end if;
pl :=create_parameter_list('Elsa');
add_parameter(pl,'DESTYPE', text_parameter,'PRINTER');
run_product(REPORTS,'C:\ORANT\REPORT60\myrep.rep',1,BATCH,FILESYSTEM,pl);
destroy_parameter_list(pl);
END;
'myrep.rep' is a simple report, consisting of:
select user from dual;
generated by the wizard.
When I run the form in preview for the web in formbuilder 6i, then it works very well,
it prints my report.
But when I run it from the cgi 'ifcgi60.exe' by the command
start -> programs -> oracle forms 6i -> run a form on the web
it returns
http://pent2.easyware.be/dev60cgi/ifcgi60.exe?
form=myform.fmx&userid=&otherparams=useSDI=yes&
lookAndFeel=generic&colorScheme=teal
then the error returned in the webbrowser is
'REP-3002: Error initializing printer. Please make sure a printer is installed.'
if parameter 'DESTYPE' is set to 'SCREEN' then it works very well, I can print by clicking the print icon.
Please can someone help me.
Best Regards,
Carl Willems.
[email protected]<HR></BLOCKQUOTE>
null

Parameter Form not calling the Main report - Gives REP-0110, REP-1070, REP-0110 error

I am using run_report_object to call a report in which the user has to input some paramters. I have followed the instructions as in the Oracle White paper document on Forms/Reports integration.
The paramter report does come up but when I hit the submit button, I get an error
REP-0110: Unable to open file 'rclug005'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'rclug005
I've checked the privileges and everything's fine on that front. Also, I can get to open the report with the web.show document built-in with paramform setting = No.
I am guessing something's wrong with the html constructed in the parameter form which is,
<form method=post action="http://myserver/dev60cgi/RWCGI60.EXE?">
<input name="hidden_run_parameters" type=hidden value="server=myserver &report=rclug005&destype=Cache&desformat=html&userid=uid/pwd@test">
In the Report Before Form trigger, I've copied the foll. html code from the Oracle White paper,
vc_parameter_form :=
'<html><body bgclor="ffffff"><form method=post action="'||:p_action||'">'||
'<input name="hidden_run_parameters" type=hidden
value= "'||vc_hidden_runtime_values||'">'||'<center><p>
<table border=0 cellspacing=0 cellpadding=0><tr><td>
<input type=submit></td><td> width=15
<td><input type=reset></td></tr></table><p><hr></p>';
I've set the :p_action parameter to a value of http://myserver/dev60cgi/RWCGI60.EXE?
Also, In the end of the report before form trigger I added this
srw.set_before_form_html(srw.text_escape, vc_parameter_form);
Any help/tips is appreciated & Thanks.

Thanks Danny,
I am building the variable exactly as in the White paper in the "before form" trigger using exactly the same values give there.
vc_hidden_runtime_values := 'server='||:p_servername||'&report='||vc_report_name||'.rep&destype='||:destype||'&desformat='||:desformat||'&userid='||:p_userinfo;
My report has some extra parameters too it expects. So do I have to include the names of those parameters too in the string above?
For example, in my report a user parameter is named 'print_date', which I do see and populate with value in the parameter form, then do I have to build that in the vc_hidden_runtime_values string above.
I am using Report 6.0.8.11.3 on 9iAS.

Reports: REP-0177 & REP-3000 errors :-( (RH 6.2.2 HA 1.0)

Hi Folks, hi Oracle,
we have some serious problems here with Oracle Reports 6i Patch 6 which is running under Red Hat HA (Red Hat 6.2.2 High Aviability Server 1.0, based on Zoot)
Because HA installs without X i have installed all needed X-packes to get a X11 system, and it runs fine.
Then i set up request for a reports from the console i get the following message:
[oracle@webserver1-do bin]$ ./rwcli60 REPORT=xxxx.rdf USERID=xxxxx/xxxxx@xxxx SERVER=xxxxx DESTYPE=SYSOUT DESFORMAT=PDF benu_id=x masszeile=xxx
REP-0177: Error while running in remote server
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
If i change the DISPLAY to a faked adress, i become the 111-errors (cant connect to X11-Socket), so i think the repserver connects to X but have some other problems with X.
If i change DISPLAY to an another Linux-Server with fully installed X11 & KDE, the report runs fine.
And all the same if the call the report over apache.
I have read the Bug-Info about Bug 1108326, but i have the same, if i change the format to HTML.
Any suggestions?
H.-C.G|rsoy
null

hello,
be aware, that you have to set the display in the environtment of the server (meaning the startup-script of the server).
regards,
the oracle reports team

REP-0081 error when emailing report output

I am using RUN_REPORT_OBJECT to execute a report from a form. I have the report set up as a Report object in the form. The report runs fine to screen or to file, but I am getting an error when attempting to email report in batch mode:
REP-0081: Error during file I/O operation.
REP-0110: Unable to open file 'mpa02448.pdf'.
scaba 14
Execution Mode = Batch
Report Destination = Mail
Report Destination Name = [email protected]
Report Destination Format = PDF
I am able to send email to the same address via UTL_SMTP directly from the form, so it is not an email handler problem.
Any ideas?

I have verified the latest patches.
Addresses are indeed in Windows address book.
As far as verifying permissions on the file, the file does not exist. It would appear that the error is generated when creating the PDF file, before emailing occurs. Again, however, I do not have problems writing to file directly.
Is there a default directory used when emailing report for file creation? Perhaps the permissions on that directory need to be changed. Please advise.

REP-50125 ERROR

Similar Messages

Maybe you are looking for