Repair installation problem

I want to do a Repair Installation of PS CS5. Both 32 and 64 bit versions of PS are installed on my Win 7 64bit machine, but the names of neither version appear in the 'Programs & Features' section of the Control Panel. What should I do?

I cannot address CS 5 per se, but had to do the full Repair Install to my CS 2 Production Studio Premium (all programs), and had no Activation issues. Now, that was back when the CS 2 Activation Server was up and running, but MY Repair Install did nothing to my Activations. Obviously, that was then, and this is now.
Good luck, and please report any issues. As a precaution, maybe Deactivate, Repair, then Re-Activate?
Hunt

Similar Messages

Windows repair installation Pavilions a6720y Windows Vista 64 bit

Can you provide a Windows Repair Installation Disc?
I recently had a serious PC problem. I knew that I would have to hand my PC over to someone and selected a Local Technical Specialists (Geek Squad) who diagnosed it as a crashed main HD, installed a new Drive and reinstalled the OS from recovery disks provided by HP.
I personally had to reinstall many programs and settings. I needed specialist assistance to reestablish my home network that did work before the crash with the same hardware but not after.
My Main PC is a desktop:
HP Pavillian,
Model a6720y,
Windows Vista Home Premium 64 bit,
6GB Physical Memory,
connected to a DSL Modem via Ethernet connection.
My second PC is a Dell Pavillion B130 Laptop, Windows XP
DSL Modem provided by Verizon, is a WestTell modem.
I have an External 1 TB HD from HP, a HP HD3000, Ser # TH1B32Y047
The System Recovery was performed with discs that I received from HP. System Recovery, Windows Vista Home Premium SP1, HP505283-001, Build ID 91ANv6PrA1.
I am contacting you because I believe that something went wrong with the reinstallation or there was more that should have been done after the initial Reinstall.
Within hours of bringing the PC home, I discovered that Windows Media Player was not working. I contacted the local support organization. They advised that yes there was a problem with Windows Media Player and downloaded an alternate program for playing Videos, VLC.
After installing several 3rd party program that were Video DVD maker Utilities, I started to have problems that did not exist before the reinstall. This is of course with the same hardware except for the new Internal HD.
I contacted the local support because I was having serious problems reestablishing my at home local network. I was informed that there were some serious Vista problems.
Can you comment on the above?
Can you provide a Windows Repair Installation Disc?
My PC is out of warranty but I did purchase and renew that HP Care Pack Support Service. That may also have expired. My last renewal that I can find was Tran # CA03207588-0001.
Your response to the above, especially your advice on a Windows Repair would be appreciated.
Sincerely,
William [Personal Information Removed]

Bill, welcome to the forum.
This is a peer to peer help forum. The only presence that HP has on it are the Admins and the Mods. Otherwise, none of us works for HP.
Windows Media Player is an integral part of Vista. Here is a update for it. I suggest installing it to see if it corrects your problem.
Here is a guide that will help you make a Vista repair disc.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Photoshop Installation problems

I recently downloaded the Security Updates for Leopard last week and Photoshop would crash at launch. So I decided to reinstall Photoshop. Installation goes fine. I go to launch PS and I get an error stating "Licensing for this product has stopped working.
You cannot use this product at this time. You must repair the problem by uninstalling and reinstalling this product or contacting you IT administrator or Adobe Customer Support for help."
After doing this 10 or so times I getting a little irritated. I ran the CS3 Clean several times until it told me it didn't delete anything anymore. So I turn to you guys for guidance and appreciate any help you can give.

That fixed it. Thanks for the help

MacBook Pro Hard Drive Repair/Permissions Problems

My MacBook Pro (2.2GHz) wouldn't start. I was getting the grey screen with the Apple logo and the spinning wheel that never stops. Tried zapping the PRAM. Tried holding down the shift key. No luck.
So I finally booted from the Leopard Install CD. No problem. Figured I'd use the Disk Utility to repair the disk. I get the following two problems every time:
REPAIR DISK PERMISSIONS:
Repairing Permissions for "GROOVY"
Error: The underlying task reported failure on exit
REPAIR DISK:
Checking Catalog File
incorrect block count for file pcscd.pub
(it should be 16 instead of 17)
Every time I re-launch the computer, using the Leopard CD, I get the same two problems. Can't repair permissions at all. And I get the same "incorrect block count for file pcscd.pub" error when trying to Repair Disk. Even though Disk Utility appeared to repair that problem (and then recheck it) the last time.
Anyway I was able to use Firewire Target Disk Mode to copy all my files to my PowerMac G4. While I was connected I also used DiskWarrior. Seemed to repair the disk with no problems.
So at this point I've pretty much resigned myself to doing an Archive and Install. Unfortunately I've tried it twice and I keep getting this:
INSTALL FAILED
Mac OS X could not be installed on your computer
The installer could not install some files in "/Volumes/GROOVY". Contact the software manufacturer for assistance.
Click restart to restart your computer and try again.
Now I'm going to try wiping the disk and doing a fresh install. If that doesn't work I guess I'll have to call Apple. Anybody else having similar problems?
Thanks,
LT

As I understand it, you can't fix a failing SMART status. Believe me I tried on my iBook! I was originally under the impression that DiskWarrior and Tech Tool Pro could fix anything, but I now understand that they and Disk Utility can only repair the directory. As it was explained to me, SMART was set up to give warning of hard drive failure so that you could rescue your data before the hard drive dies altogether. You can disable it I think, but that's like putting black tape over the warning light in your car that lights up if you are running out of oil--possible to do, but not a good idea.
So if your SMART status is failing, then the only cure is to replace the hard drive. The hard drive can work for a while, but it's on its way out.
Here's a little background information on SMART status:
http://www.computerhope.com/issues/ch000184.htm
And I hope this was just a rhetorical question!

Wierd Mac Installer problems

Im not sure why but i cant get any .pkg files to install properly. At some point in the installation the UI becomes totally un responsive and i get the spinning beachball of death. This happens for me with various pkg files, namely the iPhone SDK installer and the Onyx installer package?
Does anyone have any ideas?

See my post with this same post date in the topic iLife '09 installation problems; run preflight script error for one possible cause of this behavior.
It also could be that you need to run the "Permissions Repair" option in Disk Utility's First Aid tab to correct some permission on a system file used during the installation procedure; that your drive's file system needs to be repaired with the "Repair Disk" option; or that the drive does not have adequate free space to complete the installation. (As a rule of thumb, try to leave 10 to 15% of the startup volume's capacity free, or at lease 5 GB over & above whatever the installer tells you is needed for the install itself.)
As a general rule, it is a good idea to quit all other applications before doing an installation that uses Apple's Installer.app, & it may be necessary to disconnect non-essential peripherals (everything except the keyboard, mouse, & monitor) & restart before doing so. You should also consider removing any hacks or uninstalling any third party "enhancers" that modify basic system behavior before doing installs, or at least making sure that the latest versions of such things are installed. (Some "enhancers," especially "Application Enhancer" -- a.k.a "APE"-- are installed by other third party products & their developers do not always make that clear, so do not assume one of these things is not on your Mac just because you have not installed it directly.)

CRS Installation problem - node out of sync?

Hi at all
I have some installation problems with 10gR2 Rac and CRS on RHEL 4.0 (kernel 2.6.9) and Vmware Workastion 5.0. . Also I have applied suggestion in the vmware KB available at this link
http://kb.vmware.com/vmtnkb/search.do?cmd=displayKC&docType=kc&externalId=1420&sliceId=SAL_Public
due some synchronization problems .
Also, I have configured ntpd daemon for sync my virtual machine.
The error message from installActions2006-12-18_01-10-58AM.log is:
INFO: Exclude file list /tmp/OraInstall2006-12-18_01-10-58AM/installExcludeFile.lst does not exist or is empty. The file is ignored.
WARNING: Error while copying directory /app/oracle/product/10.2.0/crs with exclude file list 'null' to nodes 'oracle002'. [PRKC-1002 : All the submitted commands did not execute successfully]
oracle002:
/bin/tar: ./bin/ocrcheck: time stamp 2006-12-18 01:15:27 is 34 s in the future
/bin/tar: ./bin/crs_register: time stamp 2006-12-18 01:15:28 is 35 s in the future
/bin/tar: ./bin/cemutls: time stamp 2006-12-18 01:15:28 is 34 s in the future
/bin/tar: ./bin/usrvip: time stamp 2006-12-18 01:15:28 is 34 s in the future
/bin/tar: ./bin/cluvfy: time stamp 2006-12-18 01:15:28 is 32 s in the future
/bin/tar: ./bin/racgons: time stamp 2006-12-18 01:15:28 is 30 s in the future
/bin/tar: ./bin/cluutil: time stamp 2006-12-18 01:15:28 is 29 s in the future
/bin/tar: ./bin/crs_profile: time stamp 2006-12-18 01:15:28 is 29 s in the future
/bin/tar: ./bin/vipca: time stamp 2006-12-18 01:15:47 is 48 s in the future
/bin/tar: ./bin/clscfg: time stamp 2006-12-18 01:15:27 is 25 s in the future
/bin/tar: ./bin/clsid: time stamp 2006-12-18 01:15:27 is 25 s in the future
/bin/tar: ./bin/crs_start: time stamp 2006-12-18 01:15:28 is 26 s in the future
/bin/tar: ./bin/crsctl: time stamp 2006-12-18 01:15:27 is 24 s in the future
/bin/tar: ./bin/evmsort: time stamp 2006-12-18 01:15:28 is 24 s in the future
/bin/tar: ./bin/evmmkbin: time stamp 2006-12-18 01:15:28 is 24 s in the future
but if I check clock sync between two nodes....:
[oracle@oracle001 ~]$ date;ssh oracle002 date;
Mon Dec 18 01:39:33 CET 2006
Mon Dec 18 01:39:33 CET 2006
and from the first node
[root@oracle001 crs]# ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
oracle002-priv 10.0.0.1 3 u 30 64 37 0.264 8.075 2003.55
and from the second node:
[root@oracle002 crs]# ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
10.0.0.1 193.204.114.232 2 u 17 64 377 0.652 -30.302 16212.0
[root@oracle002 crs]#
Please, someone can Help me?
Thanks
Adriano Capruzzi
Message was edited by:
adriano.ba

Your 4MEM error code is indeed reporting to you that some of your RAM is not working properly (MEM = memory, i.e. RAM).
The fix for this (replacing the RAM) is normally covered under warranty for a computer as new as yours is. To get the free warranty repair I believe that you do need to bring your computer to an Apple-certified repair center, however. If you order the RAM and do it yourself, you will need to pay for the RAM and also go through the trouble of opening your computer to access the RAM, which is not that hard to do for some people, others prefer to have a technician do that.
I'd suggest that you have Apple do the RAM fix, if only so that the replacement RAM is covered as well going forward ...

You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling the product or contacting your IT administrator or adobe customer support for help....here I am

You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling the product or contacting your IT administrator or adobe customer support for help

This forum is none of those things. That being said, we may be able to help.
Have you tried uninstalling and reinstalling the product? If not, please consider following these instructions:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-Noel

OS X 10.5 Installation Problems

Hi All,
I have just tried to upgrade from Tiger 10.4.11 on my G5 mac but after putting the disc in and getting the installer started, I got to the installation destination screen and when I saw a Yellow warning triangle by the disc I wanted to install on, I clicked option and all I was given was the option to Format and install. I wanted to upgrade and so asked the installer to restart the computer and restart with my usual start up disc. Now, all the computer will do is get to the apple screen, get the spinning cog, and then turn off.
Does anyone know how I can get this working?
Thanks in advance,
Luca

Hi Luca Magnocavallo;
You have a very serious problem with your disk which Disk Utility is unable to repair. At this point you have two way to repair it. You can either buy DiskWarrior which is capable of repairing that problem or reformat the disk. If you decide to reformat remember that will wipe out everything on the disk, so back up first.
Allan

Installation problem on Intel

I have tried to install Solaris 8 on my Dell machine.
I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
The first screen says this....
SunOS Secondary Boot version 3.00
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
Entering boot debugger:
[130ee5]:
and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
I don't know what the ACPI tables are .. and how i can fix this...
Anyone who knows this... please help..
Thanx a lot..

I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

Help!
I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
HpSdpAppCoreApp
"The feature you are trying to use in on a network resource that is unavailable.
Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
The last time I dug through some files on my own, bad things happened.
Thanks,
C

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

Installation problem on SUSE 12.1

Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.

Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments

Installation Problem on Win8

Hello all
I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
Thank you guys for your support.
Installation Logs:
java_install.log - Pastebin.com
java_install_reg.log - Pastebin.com
JavaDeployReg.log - Pastebin.com

Hi people!
I have two problems with nokia suite...
first of all I can't install it at my windows 8.1, I receive the message attached...
Second,
in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
can somebody help me?
Attachments:
mokiasuit.png ‏13 KB

Installation problem on RHEL4 ..

Installation problem on RHEL4 (Red Hat Enterprise 4) i have
install start at unzip tar.gz and tar -xf .... now i have run
./installFMS it show
./fmsini: error while loading shared libraries: libstdc++.so.5:
cannot open shar
ed object file: No such file or directory
ERROR: Your are running the Macromedia Flash Media Server
installer
on the wrong platform.
it not support for fedora or anything else?
plz help....

would be nice if someone responded to this.... Macromedia
wouldn't have been this lax in giving a reply :) AND they keep up
with OS updates too :)

Xp_logininfo Installation problem

Hello gurus,
I'm facing the same problem as described in this link:
Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
the error I get is similiar:
<i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
but I just don't get how to solve it.
-I've tried to use the profiler but didn't find any information that will help me to solve.
-One of the guys wrote to add "logon rights" to the user ... what does it mean ?
Please advice,
Dimitry Haritonov

Hi sven,
Thank you very much for the quick and direct answer.
The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
Best regards,
Dimitry Haritonov

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Repair installation problem

Similar Messages

Maybe you are looking for