Repair time 3-5 BUSINESS DAYS!!!

So my monitor is broken, I have apple care and they are telling me it may take 3-5 BUSINESS DAYS to repair my monitor (RETINA BURN IN). I am a freelance designer, this is my only machine. Should it really take 3-5 BUSINESS days to repair this? I can't lose an entire week of work over this. Does anyone know if apple will supply a replacement or something? I'm thoroughly ticked at myself for opting for the retina display at this point!

shldr2thewheel wrote:
Unfortunately Apple doesn't provide loaner macs.
When did they stop providing this service?

Similar Messages

Fault Reporting and Repair Time

Is it me or is the fault reporting number for BT useless?
I realised our phone line wasn't working at about 20:00hrs in the evening. I live in an area with no mobile signal so drove the few miles needed to get a mobile signal and called 0800800151 to report the fault. After a few minutes following the menus it tells me it is doing a line test and at the end of the line test the automated service tells me there is no fault on the line and hangs up on me. I tried 4 times to find a series of menu options I needed to select to actually speak to someone. At first they told me no fault on the line. After explaining to them (several times) that I had unplugged all extensions, tried several different phones in the main socket only and I still had no dialling tone and that I also tried ringing my landline number but kept getting an error in connection message or number not in service message they agreed there might be a fault on the line and gave me an estimated repair time of 4 working days (not 3 as stated in BT's terms and conditions).
First it took 90 minutes to actually report the fault to a human being.
Secondly when I did talk to a human being they kept asking for an alternative number even though I kept on explaining I have no mobile phone signal at home.
Thirdly they did not tell me they could put a message informing callers there was a fault on my line - when I found this out for myself it took 18hours for the message to appear.
Fourthly 4 working days seems a bit extreme to fix a fault. I was told I would be kept updated online but it continuously says further diagnostic tests are being carried out from the diagnostic test centre (would that be the same diagnostic test centre that told me there was no fault on the line when I was trying to report the fault). Now living in a rural area I would notice if an openreach van was out and about but there is no sign of one so I don't believe anything is actually being done.
Is this the level of service that can be expected in the 21st century?

"BT do not provide or maintain the external network. This is done by Openreach who work for all service providers. BT do not get any special treatment.
Openreach have a backlog of work, so installation and repairs are taking much longer than normal.
Openreach only have to respond to a fault in three days, repairs could take much longer than that, depending on the nature of the fault."
I do realise the above since that seems to be the standard reply here. However, I cannot contact openreach as they are not contactable. BT provide me with a service and BT do not give me this service so therefore I have to deal with them. My point is that the BT call centres are useless - they either provide incorrect information or no information at all and it always takes ages to actually speak to a human being.
The fault has been updated online (although I did not receive an e-mail as it says on the website to tell me there is an update to the fault) and says customer action is required and that I need to book an engineer.
This is all very well but:
1. The next available date for an engineer is 2 weeks in the future.
2. The website says they expect to have the fault fixed by the 4th of september (how is that possible if I need an engineer visit and the next available date is 2 weeks in the future?)
3. If I book a day off work will the engineer actually turn up (I only ask because I speak from experience on the broadband side of things - appointment agreed, I book time off work and then no one turns up). Bet I can't charge openreach (or BT) for a missed appointment and lost earnings for myself but if it is the other way around...........
As for the comment about using a cheap residential grade service - is that not what most people use. Should I be expected to pay for a business total care package or something for a residential home telephone? Would that make a difference (I deal with several total care leased lines at work and one fault took them a year to find)?

Long repair times

I am a new Apple user - my Mac Pro arrived three weeks ago. Unfortunatly the was within 2 weeks a hardware malfunction. The help desk was helpfull and referred me to a apple store. There they took the Mac Pro in for sending to the repair workshop. Now I used to have Dell PC's with a repair time of 3-4 days max, which is important as it is our main business tool.
In the shop they told me that the repair time was 2 weeks! Unbelievable - even with apple protection which I bought - two week in which I cann't do my work. Because even a replacement machine was not possible. Hence my quesion: how can Apple pretend to be a premium brand and get away with 2 weeks repair time. I am utterly disappointed and stop the migration from windows to mac in my company of 10 seats.
Or is this abnormal and hsould I take it higher up? Let me know your experience?

For me, backups usually include backup 'systems' as well as for data, system images, parts (RAM, drives, video cards).
Depends on what and why. Hopefully that was a worse case (don't over promise what you can't) or their tests determinded they needed to order parts they don't stock. Mac Pros are not your pro-consumer item.
You probably were told or knew to run an Apple Hardware Test. Now with Lion OS on new machines, the firmware supports a remote network test and OS install - necessary also because you may not have received any OEM DVD with OS and AHT.
And ask here and see if anyone has ideas to help what was happening. And whether it might be software, OS, support for 3rd party software (Adobe etc) or hardware even.
Your Mac Pro by default boots the 64-bit kernel but can boot in 32-bit mode, just needs drivers that support both.
Without knowing more, and normally the Apple (US) Store had lots of the 2.8GHz 4-core models for US$2100 which make a nice affordable system (and very upgradable) - plus those are certified and tested, rebuilt and updated parts as needed, so more affordable and some people prefer Apple refurb'd stock "Specials" even more than new if it is the configuration you need. Or as a 2nd system, not that you should need to.
With a PC, even Dell PSU's and parts often have to be swapped or replaced but maybe the plan and stock for those occasions. (Never owned Dell, but do build a few PCs).

5. We need additional time to process your transaction You should get an email from us by next business day. If you don't hear back from us, you can check your order status on your account page or call us at +1 800-585-0774. If you're not in North America

Step 5.
5. We need additional time to process your transaction You should get an email from us by next business day. If you don't hear back from us, you can check your order status on your account page or call us at +1 800-585-0774. If you're not in North America, you can look up a local number here. For now, check out all the great free features of Creative Cloud! Get started with trials
I keep getting this.
The Bank and Paypal states that Adobe needs to process my transaction twice.
I have no order number/ no status nor contact from Adobe. I called customer service and he transferred me to sales where the phone rang with no answer.

Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Why my computer can not adjust the volume up and down althought i have had repair once time in a near day . i must waitting for 15days now it's continue

why my computer can not adjust the volume up and down althought i have had repair once time in a near day . i must waitting for 15days now it's continue

1. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

How to set execution time of the step with business days in the workflow

As we know, we can set how many days later the step should be execuated after previous step. now, the problem is how to set the business days (days except sunday and sataurday) for it. any one has good solution on it.

Hi Nick,
In order to find the Next working day you need to check for the Factory calendar days for eg, if a workitem has invoked today and if the Approver doesn't release the workitme for which u want to send a mail/reminder to the approver after say next 5or 6 working days, you need to create a function module.
For eg: In case of Purchase order, if the approver doesn't release the PO .
Create a Method saying "Next working day" , in which you will be passing the import parameters : PO, Factory calendar day and the sy-datum
and export parameter : date.
Create Input date and No of days as container elements of the Task and in the method create a Function module
In case of PO, consider the Factory calendar key from the T001W by joining the table EKPO there by passing the PO.
then pass the date, No of days(say 5 days) and the Factory calendar key to the "WDKAL_DATE_ADD_FKDAYS" , you will get the next working day of the employee.
Don't forget to check the Binding properly.
Do implement this logic and check the same.
Regards
Sharief

Time Capsule is busy for days after an erase

Hi everyone,
So my time capsule is "busy" with the blinking amber light after telling it to erase. I did the most basic erase, the "Quick Erase" and it has been "erasing" for about 36 hours now. It was a full TC. I'm concerned something is wrong...?

I have no idea which model other than to tell you it's the flat one that stores 1TB. It will solely be used for Time Machine. Don't worry, I have 2 additional backups of critical data as well. Just being extra extra cautious.
It was one of those TC that crapped out at 12-18months and its warranty is invalid now because I've done some work to it b/c the internal power supply fried it. Now it has an external power supply and a proper fan. That was 2 years ago and it's been great since. However long it lasts at this point is icing.

Not giving paid for next business day service

Hi Has anybody got a number I can phone in the uk for customer complaints? My nine month old thinkpad screen went. Company paid for extra next business day service for repairs. At first they said they didn't have a replacement and it would take an unknown amount of time to find one. When I asked to speak to a supervisor they found one.Next business day then became two days later because they sent out requests to all engineers by 3pm. I had the contract in front of me saying they had to receive the call by 4pm. They said sorry there is nothing they could do about it. Why bother paying for next day - poor service for a premium price.

Hello MacLux,
I was disappointed to read that your order wasn't processing in line with the communications you'd received. I apologize for any inconvenience to you.
Using the information you provided when you signed up for Best Buy Unboxed, I was able to locate your order. I note that your order was cancelled shortly after you posted your message. It also seems that a new order was placed early this morning. For the new order, the shipment is currently awaiting pickup from our warehouse by the carrier.
If you have questions or concerns, please let me know. I'm very grateful that you wrote to us.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

"Onsite Next Business Day Warranty" - Current Warranty Request/Warranty Issues/Poor Service

TL;DR at the bottom of the post, detailed information in between. I have had a T430s for a little less than three years. I have called the warranty/customer service ~5+ times and every time gotten extremely poor service, whether it be because parts were "backordered" for weeks at a time, or because "Next Business Day" service has been anything but. I have decided to take a different route for my most recent warranty request, I will keep an up to date account of my request via this forum, with the intent of informing as many as possible with the current state of "Onsite Next Business Day Warranty". I called the warranty ~1hr ago and filed a service request. The outcome of the request was that "I should receive a call in the next day or so, no later than 5:30PM tomorrow" when the employee I spoke with arrives in the office. I pressed as to who would call, the employee would not answer definitively, but hinted that it would be his manager, because my warranty request apparently contained "so many parts that it required approval". The parts have not been shipped, and it was abundantly clear that the subject of the call would be whether this warranty request would get approved. Hopefully, readers can already tell where this is going, next business day onsite repair apparently means in the next 24 hours, you will receive a phone call letting you know if Lenovo will honor their warranty obligations that have already been paid for. To detail my issues:1. The fingerprint scanner has stopped working for the second time. 2. I have had an issue where when I pick up the laptop on the lefthand side, the screen turns to 'snow' and will not return to its regular condition until next boot. The laptop is unusable in this condition. I have been attempting to get this fixed essentially since I purchased the laptop, however, after 3 technicians came to 'fix' the issue, it has not been solved. I have asked/suggested every time I have called the warranty line that the issue is the system board, and it needs to be replaced. Every time, they have refused to replace the system board, instead opting for other parts, some of which were on 'backorder' for over a month (remember, "Next Business Day Onsite Repair"). The difficulty in obtaining warranty service from Lenovo has caused me to only attempt to get this fixed when other issues pop up, as they have in this case. Frankly, this issue alone should have caused Lenovo to call this laptop what it is after warranty request #2, a lemon, and they should have/should send a replacement model. 3. The laptop will not 'awake' from sleep mode - when the lid is closed, the keyboard/power button will not respond, and all power sources (battery, charger cable) must be removed and the laptop restarted. 4. When the laptop is booted up, there is a 'CMOS' error message - I have never had a BIOS battery 'go' in this short a time frame. Issues 1,3, and 4 have cropped up in the last week. The warranty employee suggested that I might need to send my laptop in for 'Depot' repair instead of onsite, which in this instance will not work because of the significant delay that may entail. I have a professional licensing/certification exam this month, and would greatly prefer that my laptop be in tip-top shape for the exam. The need to have the greatest level of uptime is what caused me to pay for the NBD Onsite Warranty in the first place. My previous (horrible) warranty experiences and requirement for expedient repair have led me to seek a better method for resolving issues, namely airing them in a public forum, which hopefully will elicit a response from someone who can actually get things done in the warranty department. I have 0 hope of receiving next business day repair (or even repair by Friday, as the warranty explictly says calls received after 4:00 PM might take 2 business days). I am skeptical that the issue will be resolved in the next week or two. Likewise, I have little hope that [some of] the problem(s) will actually get resolved after "repair" has been made, as historically that has not been the case for me with this laptop. I will be voting with my dollars after this, as I have been uniformly unimpressed with Lenovo customer service/warranty/etc. The laptop has been very nice when it doesn't have issues (and when I don't forget to grab it in a certain way), however, everything else about Lenovo has been exceedingly frustrating. The TL;DR of this is:1. If you work for Lenovo and can help, or if you don't and can help, please do!!! I will be extremely grateful for any assistance. 2. DO NOT under any circumstances purchase the Onsite NBD warranty thinking that the warranty will live up to the title. I have never received NBD Onsite warranty service, despite repeatedly 'giving' the option to Lenovo to provide such service. 3. If you are considering purchasing a Lenovo product, please read some of the stories people have on their dealings with the support side of the business. I will speak for myself and say that I will almost certainly never buy another Lenovo product again, and will strongly encourage everyone I know to do the same - after recounting my issues with them.

Hey burgerbone,
Sorry to hear about your troubles getting your machine issues resolved. I am not sure of the onsite policy related to your symptoms but I will be happy to look into it for you.
Do you mind sending me a PM (Private Message) with your machine/case info?
Thanks!
Ty

Service Requests-Business days when year changes

Hi All,
I am trying to calculate for how long a SR has been open in business days only.
I have successfully used Mike Lairson's formula for the last 9 months but it seems it cannot cope with year changes. If the begin data is in 2009 and the end date in 2010, the results are not correct anymore.
E.G. For an SR that was opened on 12/30/2009 and closed on 01/05/2010 should return 5 business days but it is actually returning 110.
The syntax that I used so far is:
(CASE
/* Convert Sunday to the Business Day Of the Year */
WHEN DAYOFWEEK("Service Request"."Closed Date and Time") = 1
THEN (DAYOFYEAR("Service Request"."Closed Date and Time") - WEEK("Service Request"."Closed Date and Time")) -
(WEEK("Service Request"."Closed Date and Time") - 2)
/* Convert Saturday to the Business Day Of the Year */
WHEN DAYOFWEEK("Service Request"."Closed Date and Time") = 7
THEN (DAYOFYEAR("Service Request"."Closed Date and Time") - WEEK("Service Request"."Closed Date and Time")) -
(WEEK("Service Request"."Closed Date and Time") - 1)
/* Convert Mon-Fri to the Business Day Of the Year */
ELSE (DAYOFYEAR("Service Request"."Closed Date and Time") -
WEEK("Service Request"."Closed Date and Time")) +
(2 - WEEK("Service Request"."Closed Date and Time")) END)
(CASE
/* Convert Sunday to the Business Day Of the Year */
WHEN DAYOFWEEK("Service Request"."Opened Date") = 1
THEN (DAYOFYEAR("Service Request"."Opened Date") -
WEEK("Service Request"."Opened Date")) -
(WEEK("Service Request"."Opened Date") - 2)
/* Convert Saturday to the Business Day Of the Year */
WHEN DAYOFWEEK("Service Request"."Opened Date") = 7
THEN (DAYOFYEAR("Service Request"."Opened Date") -
WEEK("Service Request"."Opened Date")) -
(WEEK("Service Request"."Opened Date") - 1)
/* Convert Mon-Fri to the Business Day Of the Year */
ELSE (DAYOFYEAR("Service Request"."Opened Date") -
WEEK("Service Request"."Opened Date")) +
(2 - WEEK("Service Request"."Opened Date"))
END)
+
/* Adjust for Year Change */
(365 * (YEAR("Service Request"."Closed Date and Time") -
YEAR("Service Request"."Opened Date")))
Any ideea or hint would be highly appreciated.
Thank you.
Regards,
Dorin
Edited by: user805960 on 06.01.2010 07:07

Hi,
i used this formula to find out the days it calculates between 31/12/2009 and 01/01/2010, the result it gave was 106 days.
So i subtracted 106 from 365 days (365-106=259)in the formula, the formula is now giving the correct values.
I think we have to add the total working days and not the no.of days in a year.
Please can you all reconfirm the results.
Thanks
Neena
Edited by: NNK on Jan 11, 2010 3:16 PM

Add number of business days to date field

Hello, I noticed that there is not much discussion in the forum surrounding u201Cbusiness daysu201D so I hope this post/discussion/solution contributes to the content of this forum.
I am using the following 3 formulas to try to Add number of business days (based upon a table field) to a specified date:
1. Variable name = SetVar
//Set Variable for Add Business Days:
DateVar Array Holidays;
DateVar Target:= CDate({TMS_MOVEMENT_EVT.EVT_DATE}); // Put your field name in here
NumberVar Add:= {DTCI_DOD_TRANS.TRANS}; // put the number of days here to add (a positive number)
NumberVar Added := (0);
2. Variable name = AddBizDays
//Adding Business Days:
EvaluateAfter({@SetVar});
WHILE Added < Add
Do (target := target +1;
    if dayofweek (target) in 2 to 6 and not (target in holidays)
        then Added:=Added+1
        else Added:=Added);
Target
3. Variable name = HOLIDAYS
//Holiday Array Formula for the report Header:
BeforeReadingRecords;
DateVar Array Holidays := [
Date (2003,12,25),   // you can put in as many lines for holidays as you want.
Date (2003,12,31)
0
I am successfully getting my data needed to make the necessary calculations and variable assignmentsu2026 I believe that my ISSUE is that I am not sure where to place these formulas into my report so they assign the variables and execute properly when previewing my report. I am curious if that is my issue, and if so, can someone provide me direction on where to put each of these formulas in my report.
Currently, when I try to preview the report, I get the following Crystal Reports Error: -u201CA number, currency amount, Boolean, date, time, date-time, or string is expected here.u201D
Then Crystal automatically opens the AddBizDays formula and highlights the word added, see below RE: u201CWHILE Addedu201D
For reference, my report has 3 groups, and I am displaying all of my output information (and locating my formulas) in the group footer #3 report section. I have moved them around to other report sections/groups/placements, but to no success.
Thanks so much.
Best, Matt

I worked this out... FYI - for the benefit of all forum users:
ADDING BUSINESS DAYS TO A CERTAIN DATE (excluding weekends and holidays)
1. Variable name = AddBizDays
//Adding Business Days:
WhileReadingRecords;
DateVar Array Holidays;
DateVar Target:= CDate(); // Put your field name in here
NumberVar Add:= ; // put the number of days here to add (a positive number)
NumberVar Added := (0);
WHILE Added < Add
Do (target := target +1;
    if dayofweek (target) in 2 to 6 and not (target in holidays)
        then Added:=Added+1
        else Added:=Added);
Target
2. Variable name = HOLIDAYS
//Holiday Array Formula for the report Header:
BeforeReadingRecords;
DateVar Array Holidays := [
Date (2003,12,25), // you can put in as many lines for holidays as you want.
Date (2003,12,31)
0
...too bad i don't get forum points for sharing this solution.
Special thanks to KenHamady.com -- for sharing this solution.
Sincerely,
Matt

How to: Schedule a job to run on the first business day of the month

In Oracle 10.2.0.3, is there a way to schedule a repeating job to run on the first business day of the month? For example, if the first of the month falls on a weekend (such as Saturday, 11/01/2008), I would like the job to run automatically on Monday (for example, 11/03/2008) instead.

set serveroutput on
begin
print_dates('FREQ=MONTHLY;BYDAY=MON,TUE,WED,THU,FRI;BYSETPOS=1;',
      to_timestamp_tz('01-JAN-2008 12:00:00','DD-MON-YYYY HH24:MI:SS'), 12);
end;
Gives:
TUE 01-JAN-2008 (001-01) 12:00:00 -07:00 -07:00
FRI 01-FEB-2008 (032-05) 12:00:00 -07:00 -07:00
MON 03-MAR-2008 (063-10) 12:00:00 -07:00 -07:00
TUE 01-APR-2008 (092-14) 12:00:00 -07:00 -07:00
THU 01-MAY-2008 (122-18) 12:00:00 -07:00 -07:00
MON 02-JUN-2008 (154-23) 12:00:00 -07:00 -07:00
TUE 01-JUL-2008 (183-27) 12:00:00 -07:00 -07:00
FRI 01-AUG-2008 (214-31) 12:00:00 -07:00 -07:00
MON 01-SEP-2008 (245-36) 12:00:00 -07:00 -07:00
WED 01-OCT-2008 (275-40) 12:00:00 -07:00 -07:00
MON 03-NOV-2008 (308-45) 12:00:00 -07:00 -07:00
MON 01-DEC-2008 (336-49) 12:00:00 -07:00 -07:00
and the print_dates function is (10.2):
create or replace procedure print_dates
cal_string in varchar2,
start_date in timestamp with time zone,
nr_of_dates in pls_integer
is
date_after timestamp with time zone := start_date - interval '1' second;
next_execution_date timestamp with time zone;
begin
dbms_output.put_line(' -->');
for i in 1 .. nr_of_dates
loop
    dbms_scheduler.evaluate_calendar_string
     (cal_string, start_date, date_after, next_execution_date);
    dbms_output.put_line(to_char(next_execution_date,
                    'DY DD-MON-YYYY (DDD-IW) HH24:MI:SS TZD TZH TZR'));
    date_after := next_execution_date;
end loop;
end;
[\pre]

Oracle 8i: Business Days Calculation in a Subquery

To Whom It May Concern:
I apologize if this has been posted already, but I didn't find any threads that address my issue:
I need to find the number of business days between 2 dates (excludes weekends) provided by dates from an outer query such as the following:
SELECT
     C.CUSTOMER_ID
     , C.ENTRY_DATE
     , C.COMPLETION_DATE
     , <SOME SUBQUERY HERE THAT CALCULATES THE NUMBER OF BUSINESS DAYS BETWEEN C.COMPLETION_DATE AND C.ENTRY_DATE> AS BUSINESS_DAYS
FROM CUST_TABLE C
Thanks for your time and advice.
Max

you don't need a subquery. it's a very simple formula
Re: query regarding dates
(you may need to change the case to a decode for v8 - I don't remember when it was introduced)

Creating a report subscription to run on the 5th BUSINESS day.

I have a report that needs to send out on the 5th Business day, right now i have it running on the 5th of the month but it needs to change so that it does not send out on the weekends. How do i schedule it to send out on the 5th business day?
Thanks!

We have created subscription with One-time Schedule and then created another agent job to execute on 1st working day.
Step 2: execute below to get code that will actually be executed by SQL agent for subscription.
SELECT
'EXEC ReportServer.dbo.AddEvent @EventType=''TimedSubscription'', @EventData='''
+ CAST(RS.SubscriptionID AS VARCHAR(40)) + '''' AS ReportCommand
FROM ReportServer.dbo.ReportSchedule RS JOIN msdb.dbo.sysjobs SJ
ON Convert(varchar(500),RS.ScheduleID) = SJ.name
JOIN ReportServer.dbo.ReportSchedule RSC
ON SJ.name = Convert(varchar(500),RSC.ScheduleID)
JOIN ReportServer.dbo.Subscriptions SU
ON RSC.SubscriptionID = SU.SubscriptionID
JOIN ReportServer.dbo.Catalog CA
ON SU.report_oid = CA.itemid
Join ReportServer.dbo.Users U
on U.UserID = CA.CreatedByID
where CA.Name like 'Test' --Add your report name here
Step 3 : Create another SQL job to execute daily and add below to job step
DECLARE @Today DATE = GETDATE(), @Workingday Date
SELECT @Workingday = CASE DATEDIFF(DAY, '19000101', theDate) % 7
WHEN 0 THEN DATEADD(DAY, 4, theDate)
WHEN 6 THEN DATEADD(DAY, 5, theDate)
ELSE DATEADD(DAY, 6, theDate)
END
FROM (
SELECT DATEADD(MONTH, DATEDIFF(MONTH, '19000101', @Today), '19000101')
) AS d(theDate)
IF @Today = @Workingday
BEGIN
EXEC ReportServer.dbo.AddEvent @EventType='TimedSubscription', @EventData='A30C87A9-4AF1-43FA-978A-2AFD05215' --Add output from previous query
END;
Make sure you test above solution as you might have to tweak a bit to work in your environment.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

Transaction should run at a particular time once in a day.

I have a transaction and an Xacute query. I am fetching data from local database, and posting a measuring document in SAP R/3. Right now i have to run the transaction manuallly to post the document.
I want that my transaction should run automatically at a particular time once in a day (at the end of the day), and document should get posted in R/3 at the end of the day.
Can you help me out, how to go ahead for the same.

Ashish,
In SAP MII Menu, In Left side Navigation,Go to
Business Logic Services---> Schedule Editor. In that window,select the transction you want to run and select the time pattern how fequently you want to run the transaction.
For more details : http://help.sap.com/saphelp_xmii120/helpdata/en/index.htm (for MII 12.0)
In above link select the System Mangement--> Shedule Editor.
http://help.sap.com/saphelp_xmii115/helpdata/en/index.htm (for MII 11.5)
in above link Business Logic Services---> Schedule Editor.
Hope this helps you.
-Suresh

Repair time 3-5 BUSINESS DAYS!!!

Similar Messages

Maybe you are looking for