Repairfull request

Hi experts,
Daily deltas are running for 0fi_ap_3.
But some how some of the deltas were not picked up. We are unable to find it when. In this case i want to go for Repair full request without disturbng the existing deltas process chain.
Can anyone please explain me how to do this Repairfull request and also what is the difference between Repair full request and Repair Request in simple words.
Regards,
Bhadri M.

Hi Friend,
Repair full request:
You can find the option in the InfoPackage. Open up the InfoPackage and press ShiftCtrlF1. Or from the menu Scheduler > Repair Full request. You need to check in the box and it will be done.
You can go in for a repair full request when you have missed any delta loads or there are data corruption issues. By doing a full repair load, you can ensure that your data is correct and has good integrity.
With this option you can continue to use your existing delta and not worry about resetting the delta.
If you mark a request as a Repair request in the InfoPackage, it can be loaded to a data target even if the data target already contains data from an initialization run or delta for this DataSource/ source system combination, and has overlapping selection criteria.
Hope this helps.
Regards
Hemant Khemani

Similar Messages

  • Question regarding Update from an ODS

    Hi Experts,
    I have an issue of data mismatch between oa ODS 0FIGL_O02 and the InfocubeSFIGL_C02.
    the infocube is getting updated through the ODS(By means of generated Datasource).
    I have some Question:
    1) If i delete the data selectively from Infocube and ODS and then load full request for that selection:
    wather the change log data will be deeted autometically while deleting the data selectively from ODS?.
    2) I am not getting all generated  the generated datasource inspite of selecting "Display generated Objects" from Menu bar.
    Please Help me ASAP.
    Thanks ain advance
    Jitendra Joshi

    Hi experts
    Many thanks for your help.
    if i delete the data selectively from Cube and ODS both  and then load the data in to ODS for that selection (As repairfull request) now if I will try to update my Cube from the ODS, will the data in Change log cause any incostency (Because the data in change log will not be deleted from change log while selective deletion. )
    please Advice me ASAP as its an issue in Production.
    Thanks in Advance
    jiootendra Joshi

  • Need Help in Inventory Exercise -

    Dear All,
    I need your help to resolve the issue in Inventory Cube Exercise. I have searched the entire blog for similar problem but i didn't get any solution.
    Here is the Problem.
    Due to the marker problem the entire data in cube was corrupted, We have removed entire data in Cube. And we have taken the downtime and  performed all necessary steps in R/3. The same was loaded to BW.
    2lis_03_BX -->  Loaded to BW (Initialization Stock, and one time job), But the request was Not Compressed.
    2lis_03_BF--> initialize the delta without data transfer - Here i have only 1 record (initialized record) -- Request not compressed
    2lis_03_UM--> Initialize the delta without data transfer - Here i have only 1 record (initialized record) -- Request not compressed
    After Initialization, daily delta loads are running and those are fine. i am able to see the data in cube.
    =>>  After this i have loaded historical data from  2007 to 2010. (UM & BF) (each year One Request- Total 8 request for both).
    NOW
    1. i have Initialize Stock request in infocube for 2lis_03_BX
    2. i have Initialization request, delta requests and historical data requests in infocube for 2lis_03_BF
    3. i have Initialization request, delta requests and historical data requests in infocube for 2lis_03_UM
    Here is the Big task for Me. Since Two months the delta loads are running. Now i need to do compression on this cube.
    Please do remember, till now there is no compression (not even initial requests or no single requests) happened in this cube. Now i have to perform this task immedly.
    No requests are compression in the ZINV_C03_C (inventory cube) till now. ****
    I need to perform immdly, because i have downtime fror three days from 28 dec to 30th Dec due to plant closing.
    Please guide me to do this exercise.
    Thanks in Advance
    Venkat.

    Hi Maximiliano
    I got an idea on compression scenarios, but my question is if i do compression on selective requests (one By one) is there any problem to be face? and how to done. Please suggest me if you have any suggestions.
    And i have repairfull requests for Historical Data (2lis_02_bf, 2lis_02_um) 2007 to 2010. so how to do compression on these requests. Please give me your valuable suggestion .
    For your idea i am giving my action plan on this cube:
    Request ID     Data Source      Data Update       Action on Compression     
    820452     2LIS_02_BX      Initialization           Compression with Marker (u2018No Ticku2019 Selection) - One time only
    820453     2LIS_02_BF      Initialization          Compression without Marker (u2018with Ticku2019 Selection)One time only
    820454      2LIS_02_BF      Delta          Compression with Marker (u2018No Ticku2019 Selection) - All following Delta requests for BF
    821951         2LIS_02_BF   Repairful (2009)                What to do ????????????
    825106         2LIS_02_BF   Repairful (2008)                What to do ????????????
    etc..
    820455     2LIS_02_UM      Initialization          Compression without Marker (u2018with Ticku2019 Selection) - One time only
    820456     2LIS_02_UM      Delta          Compression with Marker (u2018No Tick Selection) -All Following Delta requests for UM
    821900         2LIS_02_UM   Repairful (2009)                What to do ????????????
    825107         2LIS_02_UM   Repairful (2008)                What to do ????????????
    etc..
    Till this point i dont have any issues, but  and how to handle compression for historical data (repairfull requests). "This is only biggest question in my mind".
    Please suggest me on this scenario.
    Thanks in Advance
    Venkat

  • EXACT DIFFERENCE BETWEEN  FULL LOAD AND REPAIRFULL LOAD?

    HI Champ,
    Can anyone explain me the exact difference between  full load and Repairfull load?Give e some senario where we can go for this?Please.....
    10zin

    Hi,
    Full repair can be said as a Full with selections. But the main use or advantage of Full repair load is that it wont affect delta loads in the system. If you load a full to a target with deltas running you again will have to initialize them for deltas to continue. But if you do full repair it wont affect deltas.
    This is normally done we when we lose some data or there is data mismatch between source system and BW.
    Check the OSS Note 739863 'Repairing data in BW' for all the details
    Symptom
    Some data is incorrect or missing in the PSA table or in the ODS object (Enterprise Data Warehouse layer).
    There may be a number of reasons for this problem: Errors in the relevant application, errors in the user exit, errors in the DeltaQueue, handling errors in the customers posting procedure (for example, a change in the extract structure during production operation if the DeltaQueue was not yet empty; postings before the Delta Init was completed, and so on), extractor errors, unplanned system terminations in BW and in R/3, and so on.
    Solution
    Read this note in full BEFORE you start actions that may repair your data in BW. Contact SAP Support for help with troubleshooting before you start to repair data.
    BW offers you the option of a full upload in the form of a repair request (as of BW 3.0B). If you want to use this function, we recommend that you use the ODS object layer.
    Note that you should only use this procedure if you have a small number of incorrect or missing records. Otherwise, we always recommend a reinitialization (possibly after a previous selective deletion, followed by a restriction of the Delta-Init selection to exclude areas that were not changed in the meantime).
    1. Repair request: Definition
    If you flag a request as a repair request with full update as the update mode, it can be updated to all data targets, even if these already contain data from delta initialization runs for this DataSource/source system combination. This means that a repair request can be updated into all ODS objects at any time without a check being performed. The system supports loading by repair request into an ODS object without a check being performed for overlapping data or for the sequence of the requests. This action may therefore result in duplicate data and must thus be prepared very carefully.
    The repair request (of the "Full Upload" type) can be loaded into the same ODS object in which the 'normal' delta requests run. You will find this request under the "Repair Request" option in the InfoPackage (Maintenance) menu.
    2. Prerequisites for using the "Repair Request" function
    2.1. Troubleshooting
    Before you start the repair action, you should carry out a thorough analysis of the possible cause of the error to make sure that the error cannot recur when you execute the repair action. For example, if a key figure has already been updated incorrectly in the OLTP system, it will not change after a reload into BW. Use transaction RSA3 (Extractor Checker) in the source system for help with troubleshooting. Another possible source of the problem may be your user exit. To ensure that the user exit is correct, first load a user exit with a Probe-Full request into the PSA table and check whether the data is correct. If it is not correct: Search for the error in the exit user. If you do not find it, we recommend that you deactivate the user exit for testing purposes and request a new Full Upload. It If the data arrives correctly, it is highly probable that the error is indeed in the user exit.
    We always recommend that you load the data into the PSA table in the first step and check the result there.
    2.2. Analyze the effects on the downstream targets
    Before you start the Repair request into the ODS object, make sure that the incorrect data records are selectively deleted from the ODS object. However, before you decide on selective deletion, you should read the Info Help for the "Selective Deletion" function, which you can access by pressing the extra button on the relevant dialog box. The activation queue and the ChangeLog remain unchanged during the selective deletion of the data from the ODS object, which means that the incorrect data is still in the change log afterwards. After the selective deletion, you therefore must not reconstruct the ODS object if it is reconstructed from the ChangeLog. (Reconstruction is usually from the PSA table but, if the data source is the ODS object itself, the ODS object is reconstructed from its ChangeLog). You MUST read the recommendations and warnings about this (press the "Info" button).
    You MUST also take into account the fact that the delta for the downstream data targets is created from the changelog. If you perform selective deletion and then reload data into the deleted area, this may result in data inconsistencies in the downstream data targets.
    If you only use MOVE and do not use ADD for updates in the ODS object, selective deletion may not be required in some cases (for example, if incorrect records only have to be changed, rather than deleted). In this case, the DataMart delta also remains intact.
    2.3. Analysis of the selections
    You must be very precise when you perform selective deletion: Some applications do not provide the option of selecting individual documents for the load process. Therefore, you must first ensure that you can load the same range of documents into BW as you would delete from the ODS object. This note provides some application-specific recommendations to help you "repair" the incorrect data records.
    If you updated the data from the ODS object into the InfoCube, you can also delete it there using the "Selective deletion" function. However, if it is compressed at document level there and deletion is no longer possible, you must delete the InfoCube content and fill the data in the ODS object again after repair.
    You can only perform this action after a thorough analysis of all effects of selective data deletion. We naturally recommend that you test this first in the test system.
    The procedure generally applies for all SAP applications/extractors. The application determines the selections. For example, if you cannot use the document number for selection but you can select documents for an entire period, then you are forced to delete and then update documents for the entire period in the data target. Therefore, it is important to look first at the selections in the InfoPackage exactly before you delete data from the data target.
    Some applications have additional special features:
    Logistics cockpit: As preparation for the repair request, delete the SetUp table (if you have not already done so) and fill it selectively with concrete document numbers (or other possible groups of documents determined by the selection). Execute the Repair request.
    Caution: You can currently use the transactions that fill SetUp tables with reconstruction data to select individual documents or entire ranges of documents (at present, it is not possible to select several individual documents if they are not numbered in sequence).
    FI: The Repair request for the Full Upload is not required here. The following efficient alternatives are provided: In the FI area, you can select documents that must be reloaded into BW again, make a small change to them (for example, insert a period into the assignment text) and save them -> as a result, the document is placed in the delta queue again and the previously loaded document under the same number in the BW ODS object is overwritten. FI also has an option for sending the documents selectively from the OLTP system to the BW system using correction programs (see note 616331).
    3. Repair request execution
    How do you proceed if you want to load a repair request into the data target? Go to the maintenance screen of the InfoPackage (Scheduler), set the type of data upload to "Full", and select the "Scheduler" option in the menu -> Full Request Repair -> Flag request as repair request -> Confirm. Update the data into the PSA and then check that it is correct. If the data is correct, continue to update into the data targets."
    Refer.
    Repair full request
    Re: Repair full request
    Steps to perform repair full request
    full repair request
    repair full request
    Re: Repair Full Request
    Thanks,
    JituK

  • Get all values from request.getParameter

    In ASP, I can do something like that...
    For each item in Request.Form
    Response.write "Name is:" & item & " value is:" & Request(item)
    Next
    How about in JSP? How do i get the names and values of the form using a loop?

    You can use request.getParameterNames() which will return an enumeration, then you can iterate through the enumeration and use request.getParameterValue(String paramName) method to get the values.

  • Error while releasing a request.

    Hi All,
    I'm facing an error while releasing a request.
    The request contains an ABAP programs along with two INCLUDDE programs as well as a TCode to run the same.
    It is running successfully in dev. server. But, while releasing ths request it shows me the following error :
    " Object REPT ZBAPI_SD_SERV_SALES_ORDER is inactive " ,
    where ZBAPI_SD_SERV_SALES_ORDER is the program name. When I checked out in ABAP editor it shows the program active.
    But, I'm unable to understand why its showing me an inactivation error.
    Guys, help me out in this.

    Hi,
    Check if the INCLUDE program are also ACTIVE. They must be in inactive state. Try activating them and release the request.
    Regards,
    Vikranth

  • Error:  "Could not complete your request because of a program error" (photoshop CS2 9.0.2 on MAC OSX

    Today I started my program (photoshop CS2 9.0.2) and opened a JPG file. When I went to print the file the program crashed and closed. When I restarted the program and went to open the file I got this error message, "Could not complete your request because of a program error".
    I have tried several different file types/sizes and all result in the same error message since the program crashed. It will not open any file I try to open. As I indicated above I am using Photoshop CS2 9.0.2 it is on a MAC with OSX 10.4.11.
    I called Adobe and the Rep directed me to Tech Note 331307 and told me to Re-create the Photoshop preferences files. Which I did and restarted the program, but when I tried to open a file (any file) I still get the same error message so it doesn't appear to be the preferences.
    Does anyone have any info as to what the problem may be and how to correct it.
    Thanks

    Thanks for the response. OK... This is the first day I have been able to get back to the problem.
    My system I am running Photoshop on is a Power Mac G4, AGP Graphics ATY Rage 128Pro chip set 16MB VRAM LCD 1280x1024 32-bit color, 500MHz, 1.75GB of memory, 1 MB L2 Cache, 100 MHz Bus Speed. I had installed the latest security update and repaired the permissions the day the problem started.
    Now to day I started the system and went in and created a Guest Account. I logged into the guest account and started Photoshop. Low and behold it worked just fine. So I logged out of guest and logged into my main user account And started Photoshop. Wouldn't you know it.... It works just fine. I can open any file I want with now problems.
    I got to thinking after I had done all of this that I wished I had tried to open a file in Photoshop today prior to creating the guest account to see if it still had the problem in my main user account.
    I did not change anything else on the system and all seems to work fine now. So at his point I am really not sure what the problem was.
    Again thanks for taking the time to respond to this issue.

  • Can not view data in a request from psa

    Dear experts,
    I have a problem with data in psa. If a select a mange of PSA, I see some request. I select one of them to see data. But there is no data. How is it possible?
    If you delete a reques from psa, that request desappears from the psa, doesn't it?
    Thanks in advance,
    yeberri

    it dosn't work. The problem is that you can see  different green requests in manage from psa, but it is not possible to see internal data.
    If I try to see data with se16 and the psa table, there are data for one request, but not for request that i need.
    any idea? is very important to rescue this request.
    thanks for your help.

  • Unable to capture the Data Source into a Transport Request

    Hi All,
    We have a product hierarchy and we are using the data source :4R_PRODH_D_LGEN_HIER for the hierarchy.
    Now we need to transport this structure to the quality environment but we were not able to capture the datasource:4R_PRODH_D_LGEN_HIER into a transport request.
    When ever we activate the data source:4R_PRODH_D_LGEN_HIER it is asking for the Package and the Transport Request Number.If we give these details and save it, data source is not getting captured in the request, only the "bject Directory Entry" is getting captured.
    Can someone please guide me on how to capture the datasource under "Data Sources in BW" in a transport request.
    Regards,
    Sachin Dehey.

    Hi Sachin,
    Hierarachy datasource is not captured as Attributes and Text Datasource. So what ever you have done is correct.
    What ever is captured in Object Directory Entry is correct. So go ahead with your transports, once transport is done check the Hierarchy Infopackage with Available OLTP hierarchies and load the data.
    Most important thing first see that the all Master & Transactional Datasources are transported in R/3 Dev to QA to PRD
    In BW, datasources are not transported, only their replica is transported.
    Transportation of Datasource is done in R/3. Only their replica is transported in BW.
    So wht ever you have done till now is correct. So go ahead.
    While attaching Hierarchy Datasource it is captured only in "Object Directory Entry"
    Regards,
    Vishnu.

  • EH&S WWI for GLM print request processing

    Hi all,
    we installed EH&S WWI for GLM print request processing scenario, following the note:"1394553", but when we try to print we receive this error from WWI:
    Start Function 'WWI_PRINTREQUEST_CREATE'
      Initializing parameters
      Receiving data from client
       calling RfcGetData returned 0
        receiving data lasted: 0.0 sec.
        Retrieving print request data from RFC interface
        Using Temp Directory E:\WWI\TEMP\BSV100000000000062
       Delete files in E:\WWI\TEMP\BSV100000000000062
        Creating text file E:\WWI\TEMP\BSV100000000000062\r000000000062.val
        Writing data to text file 39 lines, 1009 characters
        Updating print request status from 0 to 1
        [DB time] Writing print request lasted 9 ms
      Start processing command 'Create print request' in synchronous mode
      Creating print request 000000000062
    WwiSapDms::retrieveDocument: RFC error when calling ABAP function moduleRFC connection is not Unicode
    WwiSapDms::retrieveDocument: RFC error when calling ABAP function module
    key     : RFC_ERROR_SYSTEM_FAILURE
    message : See RFC trace file or SAP system log for more details
    Reading SBV document IB0120510 from Cache failed
        WwiCacheRead resulted with -1
        Updating print request status from 1 to 5
        [DB time] Writing print request lasted 4 ms
      ##### Command 'Create print request' finished with status E #####
        Storing ERR file E:\WWI\TEMP\BSV100000000000062\l000000000062.err into DMS succeeded
        22 lines
      Sending data to client
       calling RfcSendData returned 0
        sending data lasted: 0.0 sec.
    Elapsed time : 0.1 sec.
    We don't understand what kind of RFC or what part of customizing we have to check, could you please help us?
    Thanks,
    Christian

    Dear Pugal
    we are not using GLM + and I am not sure about the technqiue used there to handle load balancing. Regarding general WWI setup I assume you know this Note: EH&S: Availability and performance of WWI and Expert servers
    On the top there is a further SAP Note abvailable which might be of interest. This is referenced here:
    http://de.scribd.com/doc/191576739/011000358700000861002013-e
    May be check OSS note: 1958655; OSS Note 1155294 is more related to normal WWI stuff; but may be check it as well. May be 1934253 might help better
    May be this might help.
    C.B.
    PS: may be check as well: consolut - EHS_MD_140_01 - EH&S-Management-Server einrichten
    The load balancing of synchron WWi servers is donein the "RFC" layer, therefore you have no inffluence here, for asynchron WWI servers you can do a lot to manage the WWI load balancing by using "exits" etc.

  • (Request for reporting available) is not coming in Cube

    Hi All,
    I have Cube & DSO.
    I  added fields in DSO & Cube.
    Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
    thanks in advance,
    Kiran.

    Hi ....
    Have you done the Roll up ?
    Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
    Regards,
    Debjani....

  • My iphone wont let me play songs that I bought from iTunes. It says "The requested URL was not found on this server" How can i play my music also my music videos again?

    I bought a few songs and music videos from iTunes, then all of a sudden it wouldn't play and would just skip to the next song. With the music videos it would do the same. Also, this message would show up " The Requested URL could not be found on this server" What does that exactly mean? And what do I need to do to play my music/videos again?

    This previous discussion has a solution:
    https://discussions.apple.com/message/16527576#16527576

  • Retriving only hidden parameters from request.getParameter

    Hi,
    I want to retrive only the hidden parameters from previous JSP page into current JSP page. The problem here is that my hidden parameters in privious page are dynamically generated (parameter names are decided based on values retrived from the database) and I cannot retrive them using "request.getParameter(<parametername>)"
    Can I find the parameter type (i.e. text box, text area, checkbox, radio or hidden) from the request.getParameter() or request.getParameterNames() methods? or is there any other way to find it.
    Thanks in advance for any help

    You can use the getParameterNames() or getParameterMap() methods from javax.servlet.ServletRequest to get all the parameters in the request. Even if they're dynamically generated, and you don't know the names in advance, these methods will ferret them out.
    getParameterMap() returns name String, values String [] pairs, so you'll have to work with String arrays to get the input out. It's got to be that way to accomodate checkboxes and other HTML form elements that can send more than one value for a given name.
    I prefer getParameterMap, because I don't like using Enumerations as much. - MOD

  • Help with getting values from request. Very Strange!!

    Hello,
    My very strange problem is the following.
    I have created three dynamic list boxes. When the user select
    the first list box, the second becomes populated with stuff
    from a database. The third becomes populated when the second
    is selected. Now, I have used hidden values in order for
    me to get the selected value from the first listbox. The
    following code is my first listbox:
    <SELECT NAME="resources" onChange="document.hiddenform.hiddenObject.value = this.option [this.selectedIndex].value; document.hiddenform.submit();">
    <OPTION VALUE =""> Resource</OPTION>
    <OPTION VALUE ="soil"> Soil </OPTION>
    <OPTION VALUE ="water"> Water </OPTION>
    <OPTION VALUE ="air"> Air </OPTION>
    <OPTION VALUE ="plants"> Plants </OPTION>
    <OPTION VALUE ="animals"> Animals </OPTION>
    </SELECT>
    I use the getRequest method to get the value of hiddenObject.
    At this time I am able to get the value of hiddenObject to populate
    the second list box.
    But, when the user selects an item from the second list box
    and the second form is also submitted,
    I lose the value of hiddenObject. Why is this??
    The code to populate my second listbox is the following:
    <SELECT NAME ="res_categories" onChange="document.hiddenform2.hiddenObject2.value = this.options[this.selectedIndex].value; document.hiddenform2.submit(); ">
    <OPTION VALUE ="" SELECTED> Category</OPTION>
    Here I access a result set to populate the list box.
    Please help!!

    Form parameters are request-scoped, hence the request.getParameter("hiddenObject"); call after the submission of the second form returns a null value because the hiddenObject parameter does not exist within the second request.
    A solution would be to add a hiddenObject field to your second form and alter the onChange event for res_categories to read
    document.hiddenform2.hiddenObject.value=document.1stvisibleformname.resources.option[document.1stvisibleformname.resources.selectedIndex].value;
    document.hiddenform2.hiddenObject2.value = this.options[this.selectedIndex].value;
    document.hiddenform2.submit();You will then come across a similar problem with your third drop-down if indeed you need to resubmit the form...
    A far better approach would be to create a session scoped bean, and a servlet to handle these requests. Then when the servlet is called, it would set the value of the bean property, thus making it available for this request, and all subsequent requests within the current session. This approach would eliminate the need for the clunky javascript, making your application far more stable.

  • Problem getting arraylist values from request

    Hi All,
    I am trying to display the results of a search request.
    In the jsp page when I add a scriplet and display the code I get the values else it returns empty as true.Any help is appreciated.
    <%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
    <%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions" %>
    <%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %>
    <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
    <html>
    <head>
         <%@ include file="/includes/header.jsp"%>
         <title>Research Results</title>
    </head>
    <body>
    <div class="ui-widget  ui-widget-content">
        <%  
        ArrayList<Research> research = (ArrayList<Research>) request.getAttribute("ResearchResults");
         Iterator iterator = research.iterator();
              while(iterator.hasNext()){
              Research r = (Research) iterator.next();
              out.println("Result Here"+r.getRequesterID());
              out.println("Result Here"+r.getStatus());
        %> 
         <form>
         <c:choose>
         <c:when test='${not empty param.ResearchResults}'>
         <table cellspacing="0" cellpadding="0" id="research" class="sortable">
         <h2>RESEARCH REQUESTS</h2>
                   <tr>
                   <th><a href="#">RESEARCH ID</a></th>
                   <th><a href="#">REQUESTOR NAME</a></th>
                   <th><a href="#">DUE DATE</a></th>
                   <th><a href="#">REQUEST DATE</a></th>
                   <th><a href="#">CLIENT</a></th>
                   <th><a href="#">STATUS</a></th>
                   <th><a href="#">PRIORITY</a></th>
                   </tr>
              <c:forEach var="row" items="${param.ResearchResults}">
                        <tr title="">
                             <td id="researchID">${row.RESEARCH_ID}</td>
                             <td>${row.REQUESTER_FNAME}  ${row.REQUESTER_LNAME}</td>
                             <td><fmt:formatDate pattern="MM/dd/yyyy" value="${row.DUE_DATE}"/></td>
                             <td><fmt:formatDate pattern="MM/dd/yyyy" value="${row.CREATED_DATE}"/></td>
                             <td>${row.CLIENT}</td>
                             <td>
                             <c:choose>
                               <c:when test="${row.STATUS=='10'}">New Request</c:when>
                               <c:when test="${row.STATUS=='20'}">In Progress</c:when>
                               <c:when test="${row.STATUS=='30'}">Completed</c:when>
                              </c:choose>
                             </td>
                             <td>
                             <c:choose>
                               <c:when test="${row.PRIORITY=='3'}">Medium</c:when>
                               <c:when test="${row.PRIORITY=='2'}">High</c:when>
                               <c:when test="${row.PRIORITY=='1'}">Urgent</c:when>
                              </c:choose>
                             </td>
                             </tr>
              </c:forEach>
         </table>
         </c:when>
         <c:otherwise>
         <div class="ui-state-highlight ui-corner-all">
                   <p><b>No results Found. Please try again with a different search criteria!</b> </p>
              </div>
         </c:otherwise>
         </c:choose>
         </form>
              <%@ include file="/includes/footer.jsp"%>
         </div>
         </body>
    </html>

    What is ResearchResults?
    Is it a request parameter or is it a request attribute?
    Parameters and attributes are two different things.
    Request parameters: the values submitted from the form. Always String.
    Request attributes: objects stored into scope by your code.
    They are also accessed slightly differently in EL
    java syntax == EL syntax
    request.getParameter("myparameter") == ${param.myparameter}
    request.getAttribute("myAttribute") == ${requestScope.myAttribute}
    You are referencing the attribute in your scriptlet code, but the parameter in your JSTL/EL code.
    Which should it be?
    cheers,
    evnafets

Maybe you are looking for