Repeatable and storable Warp grids

Here's another thing that you should be able to do but can't…
The Warp Function at the moment is not repeatable, Transform Again does not allow you to repeat Warp transformations. There is only one way to 're-warp', and thats to record an Action step which will perform the same transform. Analyzing this Action step, its possible to see that the co-ordinates "rational points" and displacements from these, seem to still require a relatively small amount of data. So being able to repeat them in Transform again (Command Sift T) should be within the bounds of possibility. As far as I can see. Within my limited knowledge.
Also in the Options bar, while using Warp, or for that matter any Transform, the possibility to save out loadable grids and co-ordinates would be useful.
While we are on a similar subject - it should surely be possible to load in saved Liquify Grids as part of Actions also.

The thing I miss about Liquify is useful applicability as a Smart Filter.

Similar Messages

I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer

I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet. There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer. Any ideas?

Hi Cynthia,
Are you planning to have this table do any of the calculation, or is is to be used as the electronic equivalent of a sheet of paper with a grid printed on it—a place to record the data.
For your seven column table:
Are you using one or more rows at the top of the table to label the data below? If so, you might want this row (or these rows) to be set as Header Rows.
Are you using the leftmost column to label the rows? If so, you may want this column to be a Header column.
The default table supplied on the "Blank" templates contains one header row and one header column. If you need more (or fewer) Header rows or columns, select the table, then go Table (menu) > Header Rows > (choose the number you need). Repeat to set the number of Header Columns.
To make a seven column table from the table supplied by default, click on any cell in column H (The eighth column), and drag right to add more cells to the selection, until you get to the last column of the table. With these cells selected, Go Table > Delete Columns.
To make the remaining seven columns fit across a single page:
Go View > Show Print View to show the table as it would appear when printed to paper.
Select the table by clicking its icon in the Sheets List to the left (easy method), OR by carefully clicking on the outside boundary of the table itself (fiddley method).
With the table selected, you will see square white handles at each corner and at the middle of each side (including the top and bottom).
With the mouse, grab the handle in the middle of the right side of the table and drag right (or left) until the table just fits onto the width of the defined page.
With the table still selected, set the thickness and colour of the cell boundaries using the Gaphics Inspector (as described by Jerry), or using the Stroke, Thickness and Color Well controls in the Format bar above the working portion of the Window.
Regards,
Barry

Warped grid in AI cs3

I'm trying to create a warped grid for a logo background. I made a grid in Photoshop and imported into AI. when I go to use the free transform tool it does not warp the grid at all. I imported the photoshop file to AI as a .psd and I tried importing as a .jpg, same problem. Is there an easier way to do this or is this the only way but I'm doing something wrong?
what I need the fiel to look like is similar to the file in the attached.
any help?
rdere

entlity wrote:
I'm doing something wrong?
rdere
You sure are.
There are several ways.
1 Object>Envelope Distort>Make with Mesh
2 Object>Envelope Distort>Make with Warp
3 Effect>Warp
4. Any number of the distorting effects under the effects menu Effects>Distort and Transform>
I almost for got the warp tool and under it are other distortion tools.

Mesh Warp grid disappears

I am new to AE. While moving intersection points of the Mesh Warp grid overlay on a video, the grid suddenly disappears. It happens when I click somewhere in the image area I think, but I can't seem to reproduce the problem to see what kind of click causes it.
Any ideas?

Highlight the effect name in the layer's effect controls panel, and the grid reappears.

HT2513 iCal string of events repeat and end on a given date?

Is there a way to have any given string of events repeat and end on a given date?
Example, I have a different training regiment for each day leading up to an event/date and then will have the same training regiment again leading up to another event. I want each day's training regiment to show up as an event per day... but don't want to have to post each days repeat string of training prior to each event... and they don't nessecarily repeat monlthy or regularly... I want to set an end date and all the training fill in from that date backwards. Is this possible??

Does this work any better? New-jobtrigger requires a datetime object.
$csv6=Import-Csv D:\Lzero\Coll_Schd\Dependent_List.csv
foreach($cs in $csv6)
{$sys=$cs.CI
[datetime] $schd=$cs.RebootSchedule
$user="Domain\username"
$paswd=ConvertTo-SecureString -String "P@ssWord" -AsPlainText -Force
$Credential=New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $user,$paswd
Register-ScheduledJob -Name System_Restart -ScriptBlock {
Restart-Computer -ComputerName $sys -Force -wait} -Trigger (New-JobTrigger -At $schd -Once) -ScheduledJobOption (New-ScheduledJobOption -RunElevated) -Credential $Credential

Is it possible to use Airport Express as a repeater and as an airplay device at the same time?

Hi,
I am using airplay with airport express stations in combination with conventional speakers for my home entertainment. Works great. Only thing is that I have a massive block of concrete in my flat. Is it possible to use one of my express stations as a repeater and at the same time as a streaming device for airplay? Thanks!

Sure it works only with apple routers? Cause than I could stop trying.
Yes, it's proprietary like everything else Apple. You could look at this:
http://www.amazon.co.uk/dp/B006BBYXPA/?tag=hydra0b-21&hvadid=9550946469&ref=asc_ df_B006BBYXPA
I have had great success installing these for BT Home Hubs and VM Superhubs.
@JoeMY - If it is "joined" to the FritzBox then it won't work, it only works with Apple routers connected via Ethernet or as the main router.

My ipod touch 4th gen stops shuffling at song 12 repeat and shuffle bars are blue - what could be wrong

my ipod touch 4th gen stops shuffling at song 12, and the music stops all together, does not go to next song - I am playing my ipod on my Bose system - the repeat and shuffle bars remain blue - it only occurs on this particular playlist -Note: I created this playlist on my ipad - the first ipad out - with icloud it is on my ipod as well - I am totally baffled - and have checked settings, etc - do you think i need to connect to computer to sync? Please help

While playing any song on your iPod, tap the artwork to bring up the scrubber bar and additional controls. On the left hand side is a option for repeat. You want to make sure this icon is white (meaning it is set to Off). If it isn't tap it either one or two times to change its current setting.
Any luck there?
B-rock

HT201364 texmate and git 1.8.4.2 won't work on OS X Mavericks. I've downloaded them repeatedly and the following errors display "Textmate is damaged and can't be opened" and Git states "can't be opened because it's from an unidentified developer". Please

texmate and git 1.8.4.2 won't work on OS X Mavericks. I've downloaded them repeatedly and the following errors display "Textmate is damaged and can't be opened" and Git states "can't be opened because it's from an unidentified developer". Please help!

MedlockDustin,
for TextMate, you’ll need to download TextMate 2.0 alpha, since earlier versions of TextMate aren’t supported on Mavericks. The file will be named “nightly”; save it to your desktop. Once the “nightly” file has finished downloading, rename it to “TextMate.app.tar.bz2” — that will give it the “BZ” icon on your desktop. Once it’s been renamed, you can double-click on it, and TextMate.app will appear on your desktop. Use your administrative login to move TextMate.app to your Applications folder.
Regarding the “unidentified developer” message displayed by trying to open git 1.8.4.2, please refer to this Apple page for the workaround.

Can I repeat and record the same music tracks in Itunes

How can I repeat and record the same music tracks in Itunes

I would advise against this.
You can redownload some itunes purchases from itunes, but there is no guarantee that it will be there in the future.

How can change the font in the script output and the data grid ?

How can change the font in the script output and the data grid in Sql Developer?

You can't easily unless you have the latest version (2.1.1).
If you do have this version then changing the font in the Tools/Preferences menu under the code editor/fonts section will also change the font of the data grid.
For details of changing the fonts in an earlier version then see Sue's post below.
http://sueharper.blogspot.com/2010/03/back-to-basics-changing-font-setting-in.html

My iphone turns off and on repeatedly and wont charge?

My iphone turns off and on repeatedly and wont charge?

My software was up to date, I did a restore and a restart. My iphone kept turning off in the middle of the restore so it took a while. Nothing seemed to work. I left it charging over night and it did finally charge.

Workshop 8.1 - netui-data:repeater and netui:checkBox

Hi everybody.
How can i use netui-data:repeater and netui:checkBox to build a group of checkboxes ? I need something like Struts "indexed and mapped properties" (http://struts.apache.org/struts-doc-1.1/faqs/indexedprops.html)
I've tried something like this
== FORM ==
public List getSearchResult() {
return searchResult;
public void setSearchResult(List searchResult) {
this.searchResult = searchResult;
}== JSP ==
<<netui-data:repeater dataSource="{actionForm.searchResult}">>
<<tr bgcolor="#ffffff" class="text8b">>
<<td>><<netui:checkBox dataSource="{container.item.selected}" />><</td>><</tr>>
<</netui-data:repeater>>
I can see the values inside this page but when i submit this form, my list is empty (null).
What is the right way of do it ?
Thanks in advance.

Hi Daniel
There are 2 ways you can acheive this.
1) Using something called Pageflowscoped form for this. This will let you use arrays for checkbox group.
The main part will be that you need to define a member varaible of the form at the pageflow level there by the data will not be lost
2) Using Request scoped form like you have now but need to modify the getter method to populate the "searchResult" object.
public List getSearchResult() {
if( null == searchResult){
System.out.println(" Pouplate the searchResult here. ");
searchResult= new ArrayList();
//populate the default values.
return this.searchResult;
More info at:
http://e-docs.bea.com/workshop/docs81/doc/en/workshop/guide/netui/guide/conReqScopedVsPageScopedBean.html
I have a sample with pageflowscoped bean and requestscoped bean that I can send you if you provide your email address.
Unfortunately we cannot attach files in the newsgroup.
Thanks
Vimala

How to play video repeatedly and with no audio

Hello all,
I use the following code to play video in Flex:
public function startPlayback(event:CairngormEvent) : void
     if (model.nsDemoRemotePlay != null )
                               * Stop and close previous NetStream.
                              var demoStopStreamEvent :VCDemoStopStreamEvent = new VCDemoStopStreamEvent();
                              CairngormEventDispatcher.getInstance().dispatchEvent(demoStopStreamEvent);
                    nc.connect(null);
                     * Setup NetStream for playback.
                    model.nsDemoRemotePlay = new NetStream(nc);
                    model. nsDemoRemotePlay.receiveAudio( false );
                    model.nsDemoRemotePlay.client = this._responder;
                         model.videoRemote = new Video(model.videoRemoteWidth, model.videoRemoteHeight);
                         model.videoRemote.attachNetStream( model.nsDemoRemotePlay );
     model.nsDemoRemotePlay.play("assets/videos/Demo.flv");
I have two questions:Could anybody please help me in answering these.
1. Is it possible to play a video without audio? I used receiveAudio( false ) with NetStream object. But audio is still there.
2. How can I play a video play repeatedly? I want to play video repeatedly and stop it only when a Stop event is fired.
Thanks.
roshni.

NSObj.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
public function netStatusHandler(event:NetStatusEvent):void
     switch(event.info.code)
          case "NetStream.Play.Start" :// your code
                                                     break;
          case "NetStream.Play.Stop" :// your code
                                                     break;
}//end of netstatus handler function
I hope my post will answer your question or helps

How to mention the occurences for repeated and/or optional segments in cc?

Hi,
How to mention the Record Structure occurences for repeated and/or optional segments in communication channel?
Sample Structure of the Input Message Type:
Invoic01 (Message Type)
IDoc
-E1EDK01 (1 occurence) (sub segment of IDoc)
-E1EDP01 (0..unbounded occurences) (sub segment of IDoc)
     -E1EDP02 (0..1 occurence) (sub segment of E1EDP01)
     -E1EDP26 (0..2 occurence) (sub segment of E1EDP01)
     -E1EDPT1 (0..1 occurence) (sub segment of E1EDP01)
        -E1EDPT2 (0..1 occurence) (sub segment of E1EDPT1)
-E1EDS01 (0..3 occurence) (sub segment of IDoc)
Can anybody please give any idea?
Yogi.

Hi Yogi,
Why you need adapter module?
Actually this is called as module processor program which will be used to enhance the adapter functionality.
Please see the following PDF documents to develop the Module processor programs.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81
http://help.sap.com/saphelp_nw04/helpdata/en/0d/00453c91f37151e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e21106cc-0c01-0010-db95-dbfc0ffd83b3
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9913a954-0d01-0010-8391-8a3076440b6e
help : http://ifr.sap.com
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6f83d790-0201-0010-629d-ab5bf10c94e4
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7bf6e190-0201-0010-83b7-cc557eb76abe
Some weblogs for JAVA mapping for IDoc mapping
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
Difference in using java,xslt,message mapping
Please clearly ask your question.
What is your input file, and file structure you are receiving, and what is your scenario.
Then only you will get correct solution.
Regards
Chilla..

Xforms:repeat and cascading style sheet 3 ?!

I've try to create some kind of tables (a view) with this expression
<xforms:repeat xforms:bind="bind_1" xforms:id="tableau">
<xforms:output ref="nom"/>
<xforms:output ref="prenom"/>
<xforms:output ref="adresse"/>
<xforms:output ref="code"/>
</xforms:repeat>
And then i try to style it with an css.
@namespace xforms url(http://www.w3.org/2002/xforms);
xforms|*::repeat-item { border:dashed; }
But this doesn't work.
Am i wrong in my syntax?
Or is it because ie6 does not implement all the functionnality of css3?
Have you got any way to solve this problem?
Regard's
Pierre-Alexandre

Unis,
Please let us know if this post has been resolved or if you still need a resolution...
Thanks.

Repeatable and storable Warp grids

Similar Messages

Maybe you are looking for