Repeater action if Support team is changed

Dear All,
In our current system when a new support message is created a mail is send to the support team.
But when the support team is changes in an existing message mail is not triggered, as the action is already executed.
Is there a way to repeater the action if the business partner is changed?
It may be support team or message processor.
Thanks in advance.
Regards,
Praveen

Hello Praveen,
Please, maybe you can check the options in the "Action Merging" of the action that sends the email. I think that there is a option (I don't remeber what is the option, you should test) that if you choose, always when you change the document, the action will be executed again.
Unfortunately in this case, the email will be sent always when the document is changed and not only when the support team is changed. This is not the exactly requirement that you would like but maybe can help you a little bit.
Best Regards,

Similar Messages

Automatic assignment of Support Team based on processor

We have a help desk team creating Service Desk messages directly into SOLMAN (not from satellite system) using transaction NOTIF_CREATE and assigning processor. After they save the message, they open the message again in transaction CRM_DNO_MONITOR and change the Support Team manually based on the processor's Support Team. They are requesting if
the assignment of Support Team can be done automatically based on the processor assigned during creation of message and
when processor is changed/re-assigned after message has already been created.
I've read some suggestions in the blogs and forums that partner determination can be done by creating your own BADI.
So I've created a new BADI "Z_FIND_TEAM" (copied from BADI CRM_DNO_PARTNER_1) and commented the logic which derives the support team based on the rule in transaction PFAC, and replace this with my own logic of getting the processor's Support Team. Then I assign this to the action. When I tested the action during creation of message (NOTIFCREATE), the action failed to get the support team because the CRM documents (where I'm getting the processor) is not created yet at the time that the BADI is executed.
I also tested the same action (but I didn't schedule it to run automatically) during changing of message (in CRM_DNO_MONITOR). The action successfully assign the correct Support Team when I already saved the new processor before choosing the action.
But if I change the processor and do not save first before choosing the action, the support team of the old processor is assigned.
In both cases, I need to get the value of the processor in the screen and pass this to the BADI.
Can anyone help me how to pass the screen value of processor to the BADI.
Or do you have other suggestions on how I can automatically assign the Suport Team based on processor.
Thanks in Advance.
Regards,
Tess

Hi Ragu.
Thanks for your quick response.
I've already tried assigning some standard access sequence in the support team's partner determination although the assignment of the support team always returns with the BP of the top organization unit in our org chart that's why I tried using the BADI afterwards.
Our org chart is defined something like :
IMS Support Team org unit
      Help Desk org unit
           Person 1
      Functional Team org unit
           Person 2
      Technical Team org unit
           Person 3
I've tried access sequence like "Organizational Data: Employee for an Org. Unit" and "Organizational Data: Organizational Unit for a User", but when I test this the support team is always defaulted with the "IMS Support Team's" BP Number (the top org unit).
I'm not sure which access sequence I can use to assign the support team, for example, processor = "person3", the support team should be "Technical Team".
Or do I need to create my own access sequence?
I'm not familiar with these access sequence and not really sure how it works.
Thanks.
Tess

Send email to Support Team with "New" Status

Dear Expert!
My Service Desk can send email to message creator when support message have created("New" Status), but can not send email to support team. and Service Desk can send mail to Message Creator and Support Team when change Status into "IN Process". So now, I don't know why that's happen ?Please show me about that as soon as possible. Thank you very much
Thanks and Best Regards
Tru Hang

Hi,
Please refer /people/dolores.correa/blog/2007/09/18/sending-e-mail-from-support-message .
Check the last part : Other examples Send mail to Support Team .
Hope this may help you.
Regards,
Nibu Antony

Service Desk: Support team determination - Action Logs error

Hello experts,
I have customized the service desk functionality in Solman 7.0 EHP1 according to SAP help and the various (very helpful blogs from sdn). When I create a message from satelite system the "Support Team" field is already filled with the correct business partner, but when I look into the ACTIONS tab I see the following error message (red light) "Find support team responsible, when message is created". In the processing log I have the following entries:
"Processing CRM_DNO_PARTNER_1 Is Started"
"Action could not be successfully executed".
Additional no Email is sent to the BP SUpport team even I have customized it accourding to the blog from Tammy Powlas "Service Desk Support Team E-mail Notification".
When I open the created message in change mode and save the message (without any changes), then the email is sent correctly.
Can anyone give me a hint, what I did wrong.
Thanks in advance,
Thomas

Hi Thomas,
When the PDF is generated during the creation of the message, some information is not yet available to the smartform program, so most of the fields are not filled. In order to have the complete PDF, you have to send the e-mail after the document is completely created, which means using the processing time "Processing when saved" (and then you have to open the message and save), or via Job using the Processing time "Processing using selection report", and scheduling the job as mentioned by Cristiano. In this case no e-mail will be created immediately as you wish (I did not use "sent immediately" , but "created immediately", because it also depends on your SCOT job which will send the e-mail). In my case I did not need to send in the e-mail details such as System ID, SAP Component and System details to the Support team, only the message number, priority and description.
If you decide to schedule the job, create a variant as explained by Cristiano. Enter the Application CRMD_ORDER, Action profile, Action definition if you want to specify which action or actions you want to execute (if you only want to schedule the job for your email to support team action, put this action definition here), Promotion status "0", keep empty field Processing type (do not put INT for e-mail), and select Processing Time "Processing using selection report". Keep dates in blank. Set "Processing without dialog" on. It's very important that you configure your action to be executed via report, as I said in the beginning, otherwise the job will not work and you will have the "0 actions have been selected" message. Also schedule your job periodically with a very short interval if you have many messages created each hour. It also depends on your SCOT configuration. The CRM action job will only send the e-mails to the queue.
The business partner assigned to the user that holds the position below the org unit should be entered in the message processor field, but this should not cause any error in the action that determines the Support Team business partner, as this field is correctly determined. Did you configure any other action or BADI to fulfill the message processor automatically? The standard SLFN0001_ADVANCED_FIND_PARTNER action as far as I know will not do it. I have Solution Manager 7.0 with SP25 and I don't have any error message in the FIND_PARTNER action, it is all green.
If you did not create yet any action or BADI implementation for the message processor, and if you have only one business partner (person) assigned to your support team, as you described (one Org Unit, with one position and one member), you can do the following:
- Go to the Access Sequences definition and copy access sequence 0009 (organizational data: employee for an org. unit). In the Individual Accesses change the Source from Department to Support Team.
- Go to the partner determination procedure and for the SLFN0004 select the access sequence just created.
This access sequence uses Rule AC10000258 to determine the business partner Employee of an Org Unit.
Try to create a new message and check if it works. This rule does not work if you have many members below one support team.
You may also check SAP note [1041455|https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1041455].
Regards,
Raquel
Edited by: Raquel Cunha on Mar 3, 2011 4:30 PM

Hi Support team, somehow my mozilla settings have been changed and it baceme transprenet, now how to change back to normal ?

Hi Support team, somehow my mozilla settings have been changed and it became transparent, now how to change back to normal because everything is transparent, menus, pages etc.

This could be the same problem other users are reporting as a white screen or black screen, caused by an incompatibility between Firefox 33 and some older graphics card/chipset drivers.
Please disable hardware acceleration as a temporary workaround. Step-by-step directions in this thread: https://support.mozilla.org/questions/1025438
Does that work?

HT1918 Dear Support team, I would like to change my account region into another zone, but my balance of account is Usd 0.22. Please kindly reset it into zero so that I can proceed. Thank you.

Dear Support team, I would like to change my account region into another zone, but my balance of account is Usd 0.22. Please kindly reset it into zero so that I can proceed. Thank you.

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple. You can try contacting iTunes Support via this page and ask them if they can remove the balance so that you can change countries : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

HT201363 Dear support team, my security is not avalable now ! how can i change it similar to my email accout?

Dear support team, my security is not avalable now ! how can i change it similar to my email accout?

If the old ID ("email address") is your ID, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Service Desk - assign support team according to call status

Dear SolMan Service Desk experts,
We have copied the standard Service Desk transaction type to an own transaction type, and have adapted the transaction type and created a customer specific status profile.
Now we want to find out how it is possible to assign a "support team" depending on the status. This means e.g.
when the status is set from "In Process" to "Approved" a different support team "Basis" should be assigned automatically.
when the status is set from "Approved" to "Escalated" a different support team "EscalationMgrs" should be assigned automatically.
This is different to the usual and well know support team determination after call creation.
Q: Is this possible with the PPF and the actions provided in standard?
Q: What needs to be done to implement support team assignment by status?
Q: Is there a description available to achieve the desired result?
Unfortunately I did not find the needful in notes 616946 and 1512895, and also the PFAC rule 13200137 seems not to be helpful as the STATUS is not available in the Container, and as it seems once a support team is assigned the rule does not change the support team anymore. Is that correct?
Best regards,
Peter

Hi Ram,
here are the points to be done, when setting up the automatic support team determination in your Solution Manager system:
You will have to set up your organizational model by using the transaction PPOMA_CRM. Make sure before, that in table T77S0 the value for HRALX HRAC is set to "X", otherwise no Business Partners will be assigned in your org structure!
Then you will have to set up your finding rules by using the transaction PFAC, using the rule AC13200137. When ready, you can simulate rule checking if it is working. The determination is working by using the SAP component.
To the different message numbers taken, when creating a new message: Depending on the way, how the message is created (through the Help-function or using the ta NOTIF_CREATE, resp. CRMD_ORDER) the sequence of creating the two parts of the message (a message in your SolMan system consists of a Basis/ABA-message and a CRM-message) is different. If you create a message via Help, the Basis-message is created first and the number range of the Basis messages defines the number for your message. On the other hand, if you create your message by using NOTIF_CREATE, the CRM-part is getting set up first, so the number range (to be maintained with the ta CRMC_NR_RA_SERVICE) for the CRM messages defines the number for your message.
I hope this short explanation helps you,
regards
Csaba

How to create email to Support Team when NEW message created in SupportDesk

Hi there,
I have been sitting with this for a while now, and am quite frustrated. I want to know whether it is possible to generate an email notification to the Support Team in the Service Desk whenever a new message is created by the user. So far, the Org Structure is correctly set up in PPOMA_CRM. The rule CRM_DNO_1 (13200137) is configured and works. Application CRM_ORDER with Action Profile SLFN0001_ADVANCED is configured, and by standard config works by correctly determining the responsible Support Team per SAP Component whenever a new message is created. Lastly, I have configured my own Action Definition that sends an email to the user (Reported By) to notify him whenever the Status of the message changes (like to In Process or Confirmed etc), which works.
Now, whenever a new message is created by a user in the satelite system, it gets created in Service Desk and the Reported By, Sold-to-Party and Support Team are determined and the status of the message is NEW. When looking at the message in Service Desk under Actions, the only action assigned so far is the "SLFN0001_ADVANCED_FIND_PARTNER - Find support team responsible, when message is created" action. Now, the issue is this: how do you assign an action to the message straight after the Support Team determination, but before any other processing takes place in the message (meaning, you have to click on Change in Service Desk to start processing the message - when doing this, additional actions are assigned). I have created my own Action Definition (copy of SLFN0001_ADVANCED_FIND_PARTNER) and added another Processing Type after the Method Call (CRM_DNO_PARTNER_1) to email a Smartform (Processing Type = Smart Forms Mail) to the Support Team. But from here things just dont work - either it skips the Support Team determination, or it doesn't process the SmartForm type at all. Even by creating a standalone Action Definition and using Partner Determination / Function SLFN0003 (Support Team - almost same like to notify the Reported By about status changes to the message), this newly-defined action doesn't even list under Actions in the message whenever a new message is created. Only after clicking on Change in the message does this action for the first time list and execute, which is pointless - you don't want someone to open the message first and change it to enable notification of the Support Team of a new message; this should happen as soon as the message gets created.
So, if there is anyone out there who has done this before, please help, it would be much appreciated.

Gavin,
I managed to get this working in our system.
This is what I did:
   - action ZSLFN0001_ADVANCED_FIND_PRTNR (copy of SLFN0001_ADVANCED_FIND_PARTNER): changed in processing type the method to ZCRM_DNO_PARTNER_1 which I created as described in note 1041455. The Sort Order of this action has the same number as the original action of SAP (nr. 10 in my case).
   - I created another action Z_MAIL_TO_SUPPORTTEAM_OPEN with Sort Order one higher than the previous (nr. 11 in my case).
Processing Time: When saving document
Processing Times not permitted: No Restrictions
Sort Order: 11
Schedule Automatically
Partner-Dependent: SLNF0003
Determination Technology: Using Conditions that can be Transported
Rule Type: Workflow Conditions
Action Merging: Max. 1 Action for Each Action Definition
Processing Type
              - Form Name: ZFORM
              - Processing Class: CL_DOC_PROCESSING_CRM_ORDER
              - Processing Method: CRM_SRVORDER_EXEC_SMART_FORM
              - Archive Mode: Mail Only
Then I configured a Schedule Condition for Z_MAIL_TO_SUPPORTTEAM_OPEN: &CRM Service Process.User Status& = E0001ZSMSD001.
For me it's working like a ChaRM now
Hope it also solves your problem!
Best regards,
Roel

Service Desk: Can't find Support Team when creat.message in satellite syste

Hi all,
strange thing:
In service desk I customized the partner determination rule for the support team with the rule AC13200137.
(In the rule pretty much everything is filled with * )
a) when creating a message via transaction NOTIF_CREATE within solman itself, the support team can be determined without any problems.
b) when creating a message in a satellite system via ->Help ->Create Support Message, the message gets created in the solution manager, but the support team could not be determined.
In the action log for "when message is created, find
support team responsible" the protocol is red.
Details of the log:
- green: Date and time stamp
- green: Processing CRM_DNO_PARTNER_1 is started
- red: Rule container does not exist
- red: Actim could not be successfully executed
Any idea why this is acting differently ?
Thanks
Christian

hi,
It might be because of the buffer synchronization problem , you can try executing the program
HRBCI_ATTRIBUTES_BUFFER_UPDATE
in se 38 and see whether the responsiblites that you created are getting updated.Its because of the master data change and some time it take a longer time to get updated in the database .
Goodluck ,hope this is gets resolved
from,
Varghese

Automatic determination support team based on own specs?

Hi,
Rule 13200137 to automatically determines a support team using some standard specs such as:
SAP Component
Catalog Subject
Category
Code Subject
Subject Code Group
Sold-ToParty Country
Transaction Number
Priority
etc...
how can I add other specs? We need to determine the support team based on data specified in the business partner, ie postal code. In other words, our support team depends more on geographical specs, than SAP componenents.
How can I add other specs in this rule? The function CRM_DNO_READ_PARTNER_WFRULE seems quire hard coded, so I was wondering how to do this?
thanks a million,
regards,
maggie

Hi dolores
I have configured service desk and determination of support message team,
Users can change status of service desk message trough B_USERSTAT Authorization object if the Actions are available regarding the ticket status
I like to set conditions, sou2026 if service message are assigned to BASIS TEAM only this group must change service message status or edit service message data
Thereu2019s any way to do this trough authorization objects?? B_USERST_T maybe ? combination of B_USERSTAT & B_USERST_T (activation) ?? Status profiles & Authorization key & transactions types, actions profiles??
Best Regards

Send e-mail to support team.

Hello,
I created a action for sending e-mail to support team in SolMan, the action is display in actions of message, but your status is warning, and don't send e-mail. When I try execute action, view the message of error:
--> The Action Cannot Be Executed in the Dialog
Procedure:
If you want to execute the action in the document, you must change the Customizing settings of the action definition correspondingly.
I can't find this procedure.
Anybody can help me please.
Thanks a lot.
Att.
Rogério

Hi
have you configured the pfac rule which is called by ur action...(assuming u r using standard action for sending mail to support team)
Pls check this blog will solve ur problem
/people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination
Regards
Prakhar

Support team determination based on message creators - how to

Hello, dear experts,
I try to implement the following scenario:
We have several user groups with numerous users (they create messages).
Support team needs to be determined based on the user group. How can we implement this?
Standart decision with rule AC13200137 seems not applicable in that case. I try to do it with org. structure: create org. unit corresponding to user groups, assign business partners/users to them but I don't know what access sequence can I use for this (in Partner Determination). Could you give a piece of advice about this scenario?
Any help is really appreciated.

Hi Remy
I have configured service desk message and determination of message support procesors
Users can change status of service desk message trough B_USERSTAT Authorization object if the Actions are available regarding the ticket status
I like to set conditions, sou2026 if service message are assigned to BASIS TEAM only this group must change service message status or edit service message data
Thereu2019s any way to do this trough authorization objects?? B_USERST_T maybe ? combination of B_USERSTAT & B_USERST_T (activation) ?? Status profiles & Authorization key & transactions types, actions profiles??
Best regards

Email to Support Team fails !!!!

Dear friends,
i am having problems in sending an email to support team as soon as the support team is created..
I am using std rule 13200137 and i have configured responsibilites, and this rule works fine and automatic support team is found out as soon as the support team is created ..
But i have also created an action for sending an Email to support team as soon as the support team is created.. which unfortunately is not triggered as soon as the msg is created but is triggered when the support msg is opened for changes...
i have properly configured the action and its start condition and still the problem persists..
I have also used email to msg creator(Sap Standard ) action which is getting triggered properly..
Is it that i am having too many actions triggering at the creation of the support msg that is creating the problem.??
plz help as ASAP...

Suzzane,
I have a quick question regards Email to Suppor Team. I understand that you have to maintain the email address in the ORG level for support Team email address. That looks like a group email address I have to assign to it. Can I make to send to employee(Solver) email addresses instead of creating a group email address and adding those employee email address to group. Please adivce on this.
Thanks
Kumar

Support Team Email (again)

We implemented note 1041455 and changed the method of the action SLFN0001_ADVANCED_FIND_PARTNER to ZCRM_DNO_PARTNER_1.
However, my Support Team Email Action still does not fire when a Support Message is created. It does fire when we open the Support Message and click save, just like it use to.
Can someone who has implemeted this note please let us know if the did any addtional steps?

any ideas?

Repeater action if Support team is changed

Similar Messages

Maybe you are looking for