Replace Obsolete FM UPLOAD
Hi,
I am in Upgrade Project,
The Obsolete FM is UPLOAD
The exporting parameteras are
CodePage = IBM
FileType = BIn.
Then How to Replace this Obsolete FM.
Any Code would be highly appriciated.
Thanks in Advance
SriRam
if u r in ecc versions, its always better to avoid function modules.
u will have to go with oops.
go as follows:
call method cl_gui_frontend_services=>gui_upload
exporting
filename = file_name
filetype = 'ASC'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = SPACE
CODEPAGE = SPACE
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
VIRUS_SCAN_PROFILE =
IMPORTING
FILELENGTH =
HEADER =
changing
data_tab = myexcel[]
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
others = 19.
handle the sy-subrc part as u want.
lemme know u need any more.
reward, if helpful
Similar Messages
-
How to replace obsolete download function module in ECC6.0?
Hi Experts,
How to replace obsolete download function module in ECC6.0?
Thanks,
Adi.Hi,
DOWNLOAD is obsolete FM in ECC 6. To get the same functionality , we need to use
CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG method (It provides the File selection feature)
and
GUI_DOWNLOAD function module.(It downloads the internal table from program to presentation server)
Please see the example below:
Example:
*CALL FUNCTION 'DOWNLOAD'
EXPORTING
FILENAME = p_filename
FILETYPE = DAT
TABLES
DATA_TAB = T_DOWNL
EXCEPTIONS
INVALID_FILESIZE = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
OTHERS = 6.
*End of deletion CH01-
Replacement Method for above code:
DATA: l_filename TYPE string,
l_filen TYPE string,
l_path TYPE string,
l_fullpath TYPE string,
l_usr_act TYPE I.
l_filename = P_filename.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG
EXPORTING
DEFAULT_FILE_NAME = l_filename
CHANGING
FILENAME = l_filen
PATH = l_path
FULLPATH = l_fullpath
USER_ACTION = l_usr_act
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4.
IF sy-subrc = 0
AND l_usr_act <>
CL_GUI_FRONTEND_SERVICES=>ACTION_CANCEL.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = l_fullpath
FILETYPE = 'DAT'
TABLES
DATA_TAB = T_DOWNL
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22. -
Hi there,
In my SP 2010 document library - When I try to save an Excel file from File > Save As menu to the document library it always prompts me "File already exists. Do you want to replace it?" even though the file does not exist in that document library.
To the same document library - if I upload a file then it accepts it all fine.
Any clues why I cannot save files using File > Save As menu?
Thanks.Hi,
As I understand, the notification pops up when you save an excel file to SharePoint library, while when directly upload file to library, there is no wrong.
Please confirm if the issue occurs to other machines.
Please open Microsoft Office Upload Center on the issue machine, then click settings, clear cache via checking Delete files from the Office Document Cache when they are closed.
http://office.microsoft.com/en-in/excel-help/office-document-cache-settings-HA010388664.aspx
If the issue occurs to client, I’d recommend you also ask the question in Excel forum:
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=excel
Regards,
Rebecca Tu
TechNet Community Support -
Replacing obsolete Sun hardware, which parts?
I'm looking to upgrade my organization's systems and want to find out what would be current de facto specifications to replace the equipment below. I'm looking for a spec sheet, part number, etc. Thank you!
Sunfire V210 1.34ghz Ultrasparc IIIi (N31-XM41C1512HA)
Sun Sunfire V440 Server 41.593ghz Ultrasparciiii Processor (A42-XH44C2-32ZD)
Sunfire V440 (A42-XHB2C2-04HD)
Sun Racks (SR9-XK14038A-IP)
Sun StorEdge 6130 array (XTA6130 R11A2T1022)
Brocade SW 200E (SG-XSWBR0200E-8P-Z)
Sun 38 slot LTO Library base (SG-XLIBTOS-CR)
Sun CLAIS-30R-9999 SC3.0 HA iWS License
Sun CLUIS-320-Q929 StorageTek server feeFirstly have you given your 2.4GHz and 5GHz networks different names as this is a common cause of problems. Secondly don't use wifi extenders as they cut your wireless bandidth in half. I would recommend getting a couple of wireless routers and connect them to your HH5 with either powerline adapters or CAT5e cable if possible. I have three HH5 routers - one in each corner of the house wih each one on a different frequency and different wifi name so you know which one your device is connected to. With this solution I get excellent coverage throughout my house.
-
MySAP replacements for Excel upload function modules?
I am doing some development in SRM 4.0 (WAS 640) and I notice that a few of my favorite function modules are no longer available. Specifically, I'm missing these the most:
KCD_EXCEL_OLE_TO_INT_CONVERT
ALSM_EXCEL_TO_INTERNAL_TABLE
Are there new equivalents? I know how to access XLS files by writing my own OLE calls, but sometimes it's just easier to use the standard function modules instead.
Yes, I've done a function module search, but I've found nothing that looks to the the same as my old friends.Hi Chris,
I can't give you an alternative function module per say. Obviously, the downside of using SAP functions, that were probably never released for customer consumption anyway is that they can easily disappear. The suggestion I have is to use the features offered by DOI (desktop office integration). There in lies a set of classes and methods for generically accessing various documents (e.g. ms word, excel etc.) There is some examples in the re-use library (tcode se83). So here you don't need to be worried about the OLE either. Possibly in WAS there might also be some other classes that might access Excel sheets. Downside of finding a new function is that it might disappear in the next version you go to, whereas DOI is unlikey to disappear in a hurry. Best of luck.
p.s. there are a few other postings in the forum, maybe one will give you an answer, if you haven't search already.
Message was edited by: Michael Bennett -
Flickr plugin does not "replace" when uploading after elimination of Flickr Pro accounts
When uploading an image to flickr it has been possible for Pro accounts to re-upload a photo and replace an existing upload. This "replace" functionality keeps intact any comments, ratings, "favorites" etc that the photo has accumulated on the Flickr website since the original image was uploaded. The Lightroom Flickr plugin (authored by Adobe) has always correctly limited this "replace" functionality to Pro accounts (flickr did not allow the API call for non-pro accounts).
With the recent flickr policy change eliminating Pro accounts, flickr has enabled the replacement functionality for all users. However, the Lightroom flickr plugin still performs a check for a Pro account and does not attempt to replace a previously uploaded image if a user has a non-pro account (which is now all accounts that were not grandfathered in as Pro). The plugin currently uses the older behavior of first deleting the image and then uploading a new image, thus losing all comments, history, views, bookmarks etc that the old image has accumulated.
There is another non-adobe flickr plugin, and the author of that plugin stated on his web site that simply using the old Pro "replace" API call now works for normal flickr accounts.
I recognize that this flickr policy change happened recently, but I'd like to be sure that Adobe is aware of this change so that the next point release of Lightroom will include a change to the built-in flicker plugin to remove the check for Pro accounts and allow all users to replace photos. I used this feature a lot when I was a pro subscriber, and I think all flickr users of Lightroom would appreciate this change. It is still possible for all users to replace an image on Flickr by exporting to a jpg from Lightroom and then uploading the replacement through the web site, but enabling the plugin would obviously be better for customers.I worked with Gokul from Adobe support, and we eventually stumbled into the solution.
The system clock was wrong!
Based on something Friedl says on the blog for his Flickr plugin, the Flickr authentication APIs will fail if the system clock is wrong. His plugin helpfully points out that the clock is wrong when you install it. It also reports the error that he gets from the Flickr APIs: HTTP 401 (not authorized). Unfortunately, Lightroom's builtin Flickr publishing plugin doesn't report any error, and it just fails silently.
In my case, Windows appeared to be displaying the correct time, but the time zone was incorrect, and my system time was actually 3 hours ahead. I reset the clock and timezone and restarted Lightroom. Now, the builtin Flickr publish plugin is working again. -
hi,
Kindly tell me what is the replacement for the UPLOAD Func. Module.
If it is GUI_UPLOAD.
Then what is the replacement code for this
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_xtract
filetype = 'DAT'
item = 'Upload SBA Input File'(005)
IMPORTING
act_filename = p_xtract1
TABLES
data_tab = itab_data
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
OTHERS = 8.
Especially for the Export parameter 'ITEM' and the Importing parameter 'act_filename'.
Kindly guide me on this...
Regds,
Rajesh PRajesh,
Where exactly were you using the UPLOAD function?
At the same place, you will have to call two methods now.
1. To get the file selected by the user, call the FILE_OPEN_DIALOG, the user will select a file which will be the output of the method.
2. Use the file selected and pass that to the parameter as the GUI_UPLOAD METHOD.
Here is a sample code
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILENAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* MULTISELECTION =
* WITH_ENCODING =
CHANGING
FILE_TABLE =
RC =
* USER_ACTION =
* FILE_ENCODING =
* EXCEPTIONS
* FILE_OPEN_DIALOG_FAILED = 1
* CNTL_ERROR = 2
* ERROR_NO_GUI = 3
* NOT_SUPPORTED_BY_GUI = 4
* others = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE FILE_TABLE INDEX 1.
W_FILE = FILE_TABLE-FILENAME.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD
EXPORTING
FILENAME = W_FILE
* FILETYPE = 'ASC'
* HAS_FIELD_SEPARATOR = SPACE
* HEADER_LENGTH = 0
* DAT_MODE = SPACE
* CODEPAGE = SPACE
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* READ_BY_LINE = 'X'
* IMPORTING
* FILELENGTH =
* HEADER =
CHANGING
DATA_TAB =
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* NO_AUTHORITY = 6
* UNKNOWN_ERROR = 7
* BAD_DATA_FORMAT = 8
* HEADER_NOT_ALLOWED = 9
* SEPARATOR_NOT_ALLOWED = 10
* HEADER_TOO_LONG = 11
* UNKNOWN_DP_ERROR = 12
* ACCESS_DENIED = 13
* DP_OUT_OF_MEMORY = 14
* DISK_FULL = 15
* DP_TIMEOUT = 16
* NOT_SUPPORTED_BY_GUI = 17
* ERROR_NO_GUI = 18
* others = 19
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Ravi
Message was edited by: Ravikumar Allampallam -
Difference of gui_upload and upload
difference of <b>gui_upload</b> and <b>upload</b> and <b>ws_upload</b>
hi
good
There is no difference from functionality point of view.
But when the new versions of SAP comes into picture certain objects(fun modules,tables,fields etc) will become Obsolete and the new Objects will come into picture in the place of Obsolete Fun modules and other objects
So GUI_Upload and GUI_DOWNLOAD are the newversion of function modules which are the replacement for the UPLOAD and DOWNLOAD fun modules
So we should use the New one.
So it depends on the SAP Version on which you are working
If you are still working in the Older versions of SAP like 4.0 like thing then you can use the DOWNLOAD and UPLOAD.
But if you are working on the latest versions like ECC5.0 and ECC6.0 you have to use GUI_download and GUI_UPLOAD fun modules only
reward point if helpful.
thanks
mrutyun^ -
Obsolete Function Modules in ERP6.0
Hi Experts,
We are upgrading to ERP6.0 Unicode. We have lots of obsolete function modules (other than WS_UPLOAD/UPLOAD/WS_DOWNLOAD/DOWNLOAD). These are marked as obsolete by SAP. Now what will happen if we don't replace them with new function modules and continue with the existing ones? Will it create problems in the new system?
Regards,
RavikanthHi Ravikanth
the below link having replace FM's for Obsolete FM's,
Check this link.
http://www.geocities.com/victorav15/sapr3/abapfun.html
Yes We have to replace obsolete FM's in ECC6.0,otherwise we get errors,some times goes to dump,not properly work.
So We have to replace Obsolete FM's
Above link will useful to you.
Thanks And Regards,
Syf -
Difference between the fms upload & gui_upload
hai ,
can anyone explain me the difference between upload and gui_upload.
thank u in advance,
venkat.Hi
There is no difference from functionality point of view.
But when the new versions of SAP comes into picture certain objects(fun modules,tables,fields etc) will become Obsolete and the new Objects will come into picture in the place of Obsolete Fun modules and other objects
So GUI_Upload and GUI_DOWNLOAD are the newversion of function modules which are the replacement for the UPLOAD and DOWNLOAD fun modules
So we should use the New one.
So it depends on the SAP Version on which you are working
If you are still working in the Older versions of SAP like 4.0 like thing then you can use the DOWNLOAD and UPLOAD.
But if you are working on the latest versions like ECC5.0 and ECC6.0 you have to use GUI_download and GUI_UPLOAD fun modules only
Regards
Anji -
Please confirm wheather the tables changed or obsoleted from 11i to R12.
All,
Can you please let me know whether the following tables are replaced/obsoleted and such information from 11i to R12 as part of upgrade.Please let me know if you need any further information.
Just want to know ,the following tables are changed from 11i to R12,if yes what has changes & what has replaced with.
General Ledger (GL)
GL_PERIODS
GL_BUDGETS
GL_PERIOD_STATUSES
GL_BALANCES
GL_BUDGET_VERSIONS
GL_CODE_COMBINATIONS
GL_BALANCES
GL_JE_CATEGORIES_TL
GL_JE_SOURCES_TL
GL_JE_BATCHES
GL_JE_HEADERS
GL_JE_LINES
Accounts Payable (AP)
AP_TERMS_TL
AP_CHECKS_ALL
AP_INVOICES_ALL
AP_BATCHES_ALL
AP_HOLDS_ALL
AP_PAYMENT_SCHEDULES_ALL
AP_SYSTEM_PARAMETERS_ALL
AP_LOOKUP_CODES
AP_INVOICE_DISTRIBUTIONS_ALL
AP_INVOICE_PAYMENTS_ALL
Fixed Assets (FA)
FA_BOOKS
FA_ADDITIONS_TL
FA_ADDITIONS_B
FA_ASSET_HISTORY
FA_CATEGORIES_B
FA_CATEGORIES_TL
FA_CATEGORY_BOOKS
FA_CATEGORY_BOOK_DEFAULTS
FA_DISTRIBUTION_HISTORY
FA_DEPRN_DETAIL
FA_DEPRN_PERIODS
FA_RETIREMENTS
FA_LOCATIONS
FA_ASSET_INVOICES
FA_RETIREMENTS
FA_TRANSACTION_HEADERS
FA_CALENDAR_PERIODS
Purchasing (PO)
PO_DISTRIBUTIONS_ALL
PO_LINE_LOCATIONS_ALL
PO_NOTIFICATION_CONTROLS
PO_ACTION_HISTORY
PO_LINE_TYPES_TL
PO_HAZARD_CLASSES_B
Thanks a lot in advance.Please see your other thread -- 11i to R12 Tables/Views Replacement or obsoleted.
-
Uploading big files via http post to XDB table
Hello,
I ve created a web form for to upload files as blobs to the database using XML DB, DBPS_EPG package and preconfigured DAD.
The issue is that small files (~10kb) are being uploaded ok, but file which is 100K during http post returns connection reset from the server side.
To my opinion there might be some max file size parameter for oracle server to accept during oracle listener tcp connection (as apach has maxrequestlimit).
Is there any workaround for to load large files to the XDB table via webform?
Here is a piece of code:
CREATE USER web IDENTIFIED BY web_upload;
ALTER USER web DEFAULT TABLESPACE XML_DATA;
ALTER USER web QUOTA UNLIMITED ON XML_DATA;
ALTER USER web TEMPORARY TABLESPACE TEMP;
GRANT CONNECT, ALTER SESSION TO web;
GRANT CREATE TABLE, CREATE PROCEDURE TO web;
ALTER SESSION SET CURRENT_SCHEMA = XDB;
BEGIN DBMS_EPG.CREATE_DAD('WEB', '/upload/*'); END;
BEGIN
DBMS_EPG.SET_DAD_ATTRIBUTE('WEB', 'database-username', 'WEB');
DBMS_EPG.SET_DAD_ATTRIBUTE('WEB', 'document-table-name', 'uploads');
DBMS_EPG.SET_DAD_ATTRIBUTE('WEB', 'nls-language', '.al32utf8');
DBMS_EPG.SET_DAD_ATTRIBUTE('WEB', 'default-page', 'upload');
COMMIT;
END;
ALTER SESSION SET CURRENT_SCHEMA = SYS;
CREATE TABLE web.uploads (
name VARCHAR2(256) NOT NULL
CONSTRAINT pk_uploads PRIMARY KEY,
mime_type VARCHAR2(128),
doc_size NUMBER,
dad_charset VARCHAR2(128),
last_updated DATE,
content_type VARCHAR2(128) DEFAULT 'BLOB',
blob_content BLOB
CREATE OR REPLACE PROCEDURE web.upload
AS
url VARCHAR2(256) := 'http://demo.test.com:9090/upload/uploaded';
BEGIN
HTP.P('<html>');
HTP.P('<head>');
HTP.P(' <title>Upload</title>');
HTP.P('</head>');
HTP.P('<body>');
HTP.P(' <h1>Upload</h1>');
HTP.P(' <form method="post"');
HTP.P(' action="' || url || '"');
HTP.P(' enctype="multipart/form-data">');
HTP.P(' <p><input type="file" name="binaryfile" /></p>');
HTP.P(' <p><input type="file" name="binaryfile" /></p>');
HTP.P(' <p><button type="submit">Upload</button></p>');
HTP.P(' </form>');
HTP.P('</body>');
HTP.P('</html>');
END;
CREATE OR REPLACE PROCEDURE web.uploaded (
binaryfile OWA.VC_ARR
AS
BEGIN
HTP.P('<html>');
HTP.P('<head>');
HTP.P(' <title>Uploaded</title>');
HTP.P('</head>');
HTP.P('<body>');
HTP.P(' <h1>Uploaded</h1>');
FOR i IN 1 .. binaryfile.COUNT LOOP
IF binaryfile(i) IS NOT NULL THEN
HTP.P(' <p>File: ' || binaryfile(i) || '</p>');
END IF;
END LOOP;
HTP.P('</body>');
HTP.P('</html>');
END;
/帖子经 anatoly编辑过Welcome to Apple Discussions!
Much of what is available on Bittorrent is not legal, beta, or improperly labelled versions. If you want public domain software, see my FAQ*:
http://www.macmaps.com/macosxnative.html#NATIVE
for search engines of legitimate public domain sites.
http://www.rbrowser.com/ has a light mode that supports binary without SSH security.
http://rsug.itd.umich.edu/software/fugu/ has ssh secure FTP.
Both I find are quick and a lot more reliable than Fetch. I know Fetch used to be the staple FTP program, but it grew too big for my use.
- * Links to my pages may give me compensation. -
Recommendations on good upload software?
I posted a ? about inserting hyperlinks, got one helpful answer, will try to implement it today. NEXT ? is what is good upload software that works with iWeb. 'Fetch' was mentioned in one post. What should I buy (since Apple Safari apparently only uploads to the .Mac site) to upload my page to my existing site? And I am trying to REPLACE a page uploaded using Claris Homepage (which works a lot better than the evil Bill Gates-inspired iWeb).
Here are some tips for using other servers, including uploading:
http://homepage.mac.com/thgewecke/iwebserver.html
If iWeb doesn't meet your needs there are tons of other programs out there:
http://www.pure-mac.com/webed.html -
I created a page in iWeb and published it on iPage. The upload was messed up and I talked to iPage who told me something about an ampersand and Unix that caused the problem and they were able to do something at their end that corrected the problem in a few minutes (the site is rykline.com) My question is, if I make a change on my iWeb page and upload it again, does the entire page replace the original upload or do only the changes affect it. Obviously, if the whole page is replaced, the same problem will probably reoccur.
ThanksTry this to find out :
Add a page page (with an ampersand?), publish and view the result.
And yes, everytime you make changes the entire file is published. It's not iWeb specific. All files on your computer or elsewhere are usually replaced in their entirety.
And if they fixed the problem on their side, and not on your side, there's no reason to expect a problem when you publish your pages.
BTW, why hasn't your page a proper filename? -
FNDLoder error in uploading the responsibilities
Hi All,
Good day..
This is the new responsibility which i downloaded in test instance using fnd loader and uploading the same to production. But am receiving the below error
---------------------------------------------------------------------------+
Application Object Library: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
module:
+---------------------------------------------------------------------------+
Current system time is 07-APR-2010 11:52:35
+---------------------------------------------------------------------------+
Uploading from the data file JSWEL_SBU1_INVENTORY_USER.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dump from LCT/LDT files (/energy_prodappl/oracle/product/ENERGYP/appltop/fnd/11.5.0/patch/115/import/afscursp.lct(115.44), JSWEL_SBU1_INVENTORY_USER.ldt) to stage tables
Dump LCT file /energy_prodappl/oracle/product/ENERGYP/appltop/fnd/11.5.0/patch/115/import/afscursp.lct(115.44) into FND_SEED_STAGE_CONFIG
Dump LDT file JSWEL_SBU1_INVENTORY_USER.ldt into FND_SEED_STAGE_ENTITY
Dumped the batch (FND_APPLICATION INV , FND_RESPONSIBILITY INV JSWEL_SBU1_INVENTORY_USER ) into FND_SEED_STAGE_ENTITY
Upload from stage tables
Error loading seed data for FND_RESPONSIBILITY: APPLICATION_SHORT_NAME = INV, RESP_KEY = JSWEL_SBU1_INVENTORY_USER, ORA-20001: APP-FND-01572: Invalid foreign key data was found for this record.
Value JSWEL INVENTORY MENU VIEW for column MENU_NAME does not exist in table FND_MENUS_VL.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 07-APR-2010 11:52:36
+---------------------------------------------------------------------------+
~The application short name INV exists in the target destination. Please suggest on the same.
thansk,
baskar.lhi,
I tried the document
FNDLOAD apps/apps 0 Y UPLOAD $FND_TOP/patch/115/import/afsload.lct JSWEL_SBU1_INVENTORY_USER.ldt UPLOAD_MODE=REPLACE CUSTOM_MODE=FORCE
Uploading from the data file JSWEL_SBU1_INVENTORY_USER.ldt
Altering database NLS_LANGUAGE environment to AMERICAN
Dump from LCT/LDT files (/energyd_db/oracle/product/Energyd/appltop/fnd/11.5.0/patch/115/import/afsload.lct(115.60), JSWEL_SBU1_INVENTORY_USER.ldt) to stage tables
Dump LCT file /energyd_db/oracle/product/Energyd/appltop/fnd/11.5.0/patch/115/import/afsload.lct(115.60) into FND_SEED_STAGE_CONFIG
Dump LDT file JSWEL_SBU1_INVENTORY_USER.ldt into FND_SEED_STAGE_ENTITY
An error occurred at line 52 in file JSWEL_SBU1_INVENTORY_USER.ldt
An entity definition is required to define values of type FND_APPLICATIONthanks,
baskar.l
Maybe you are looking for
-
I changed my Apple ID (new email address, same account), via the Apple website on my laptop, but when I try log into ITunes on my iPad, it still has the old ID. It is greyed out, so I can't change it. On researching further, it seems I have to sig
-
Lightroom 4.4 Tethering does not work with Nikon D7100
A week ago i bought my new Nikon D7100. Yesterday i wanted to try the thetering of Lightroom 4.4. It worked with my Nikon D5100 but it does not work with the new camera. Is it a problem with my camera or with Lightroom? Another question does tetherin
-
I have Elements 8 Until recently it worked fine but within the past month, whenever I edit a photo like enhancing or cropping and save it as a .jpeg it is saved as .file I am not doing anything any different then in the past. Your suggestions to try
-
LR 4 and swiss french keyboard issues
Hello, I was looking for the french forum but I was redirected on this one ? I am just starting with this product and I have identified some issues. - The shorcut contextual menu is not working - The shorcuts rotations are not working. - The french t
-
Hi, i have a problem to compile a servlet, i will try to explain my problem easily... i have a JavaBena class int he directory.....C:\Programmi\Apache Software Foundation\Tomcat 6.0\webapps\ROOT\WEB-INF\classes......and i have compiled it by DOS comm