Replacement heatsink for CPU board for M5000

I am looking for a replacement heatsink that goes on the cpu module for an M5000. I have had no luck online or calling support. Does anyone have the part # or know where to get them.

This part cannot be ordered as separate part, you must change the complete CPU module.
But why do you need to replace the heatsink ?

Similar Messages

  • Replacement logic board for my 20" cinema display?

    I'm looking for good place online to buy replacement logic board for my 20" cinema display. Any suggestions?

    You could ask the Apple store to let you have (or buy) one of the boxes they use to send the displays in for repair. They should have these on hand.

  • APPLE TECH TEAM SUGGESTED TO REPLACE MY MACBOOK PRO'S LOGIC BOARD FOR 2ND TIME?All the funtionality and applications is working fine but my screen backlight is off.If i expose it to direct sunlight , i can see what is running on my MAC(out of warranty)

    APPLE TECH TEAM SUGGESTED TO REPLACE MY MACBOOK PRO'S LOGIC BOARD FOR 2ND TIME?All the funtionality and applications is working fine but my screen backlight is off.If i expose it to direct sunlight , i can see what is running on my MAC(out of warranty)

    likely display inverter board.
    did you get your inverter board replaced already?
    Did you have a question?
    If the diagnostic in shop indicates same, thats 1000X better than anyone can do online in "diagnosis" (not really genuine diagnosis of course)

  • How much for a board replacement for iphone 4?

    Please Help, how much for a board replacement for iphone 4? thanks.

    Apple does not replace just the board, they offer complete Replacement iPhone 4 exactly like yours for $149.

  • Why in the world does it cost sooo much to replace a logic board for your water damage macbook pro? As if apple hasn't made enough money to allow some people to save some money for their laptop..

    Why in the world does it cost sooo much to replace the logic board for your macbook pro.
    As if apple hasn't made enough money to allow some people to save some money..

    Do you think Apple should reward your clumsiness or lack of caution by giving you a logic board for free, or at cost? Come to think of it, shouldn't they just give you a free new computer, and be grateful to you for taking it off their hands?
    Apple isn't a charity operated for the benefit of the careless.

  • Replacement Chipset/Heatsink Fan (northbridge? for k7n2 delta-ilsr)

       < i need a replacement heatsink and fan for this fan.  that will fit!          Reason: I want a new one that is quiter, and the original fan in it broke.  I also need to be able to buy these part(s) online.

    Me too. You can get them in copper or aluminium. I have the latter, and for more than year now it's been doing a fine job with minimum noise.
    Check it out here:
    http://www.pcabusers.com/reviews/iceberg/p1.html

  • V890 rebooting after replacing CPU board

    Hello,
    We have a V890 that we had Sun replace a system board on it. It was system board a which had 2 1.8 processors on it. The original system board was replaced because the CPU's were running to hot. Well after the swap the server ran for 20 minutes and rebooted itself. Looking in the log files, all we see is the following message: unix: [ID 796976 kern.notice] System booting after fatal error FATAL Sys Hardware
    Sun is coming out with a new board tomorrow, but I thought that I would ask and see if anybody had any ideas. I guess bad luck that a new board is bad?
    Any special steps that need to be done after the installation of the new board like a boot -r?
    Thanks,
    Gary

    Dear Riosjr,
    According to Apple's service source individual fan failure has two causes: the failing fan itself or the logic board. You replaced the board, so in your situation where one of the fans doesn't seem to receive any electric power, look for cable damage or bend pins inside the connectors.
    Lots of success and regards,
    Robbert

  • Check this out : Daystar, Inc. for CPU upgrade! Reliable?

    I recently bumped to a highly tempting news : it is now possible to upgrade my iMac FP 17" 800MHz to a faster 1.35GHz, along with larger internal HDD, RAM and Optical Drive. The only option not available is the Video Card (they say it's on-board by default and cannot be replaced).
    A company named Daystar offers a low-cost CPU upgrade for the following iMacs (the right-hand GHz is the available upgrade specific to each model):
    15" 700MHz to 1.35GHz
    15" 800Mhz to 1.35GHz
    17" 800Mhz to 1.35GHz
    15" 1.0G to 1.92GHz
    17" 1.0G to 1.86GHz
    17" 1.25G to 1.92GHz
    20" 1.25G to 1.92GHz
    They say the upgrade is available for as low as $449.00. For additional options additional cost would apply, but anyway. I wonder if anyone had heard this before?
    Here's the link to Daystar, iMac FP upgrade section.
    http://daystar-store.com/index.asp?PageAction=VIEWCATS&Category=732
    I mean, this really sounds sweet but how reliable is this? I thought iMac was basically a non-upgradable system, except for its external RAM and Airport(Express) network card. Pretty impressive, though. Surely worth a glance for those of us considering serious upgrade (like me).

    Hi,
    FWIW....
    Modifying some thing that was designed for a very specific purpose usually ( in my experience ) leads to problems further down the line. The excess heat may cause problems. Taking the thing apart and re-assembling may lead to others. Buying a newer, faster machine seems a far safer option - To me at least!
    Regards
    Ian

  • K8N Neo2 Platinum - Best CPU upgrade for under £200 please?

    Hi there,
    I currently have an AMD Athlon 64 3500+ 2.2ghz running on this board. The BIOS is the latest etc. I am now wanting to upgrade the CPU on this. I run everything at normal settings... don't overclock etc.
    Not sure what I can go to with it and was wondering if anyone can advise please?
    Budget for CPU upgrade is £200... any help would be very much appreciated.
    Thanks in advance,
    Gazza.
    PS: Not sure if other specs are required but here goes:
    2 X 512MB PC3200 184 pin DDR400 (was thinking of just buying another 2 x 512MB)
    2 x 80GB Segate SATA HDD 8MB CACHE (was thinking of buying a Seagate Barracuda 320GB SATA HDD 16MB CACHE)
    256MB Radeon X800XT Platimun AGP Graphics Card (keeping this)

    Quote from: WaltC on 27-December-06, 10:36:15
    Check out this very brief thread of mine:
    http://80.190.215.245/index.php?topic=103825.0
    ...If your 3500 is a 90nm San Diego core, there's really nothing new for you there.
    If it's an earlier core, though, you might have difficulty in supporting all four 512mb DIMMs at 200/400MHz.  The San Diego 3700+ core I just bought to replace my 130 nm A64 4000+ has the same 1mb L2 cache as the A4000+ it replaced, but an improved memory controller which will support 4 double-sided 512mb DIMMs in this motherboard at full speed of 400MHz DDR.  The 3700+ is 90nm, and is simply generally a better core in terms of errata, power consumption, and, if you ever feel the need to experiment, overclocking.  I would imagine you should be able to pick one up at < 200 pounds, your cost (my keyboard doesn't have a "pound" key...)
    My last post in the thread mentions what bios version you should run with this cpu.
    Also, unlike the Newcastle or Winchester A3500+ cores, the A3700+ San Diego 90nm core supports SSE3 intructions.  Here's an article you might care to read describing some differences between the A3500+ Newcastle and Winchester cores:
    http://www.hothardware.com/viewarticle.aspx?articleid=613&cid=1
    Here's a current link to the 3700+ cpu for sale:
    http://www.newegg.com/Product/ProductList.asp?DEPA=0&type=&Description=A64+3700%2B+Retail&Submit=ENE&N=0&Ntk=all&Go.x=0&Go.y=0
    Many thanks for your reply, much appreciated. However a lot of that has just gone right over my head I'm afraid :(
    Do I have to strip the PC to find out which processor I have? The invoice I still have for the PC does not state what type it was. This was not a home built PC and was purchased from an online store in the UK.
    I have a list from the MSI site of processors that this MB is supposed to take. Am I right in saying that I could install an AMD Athlon 64 X2 4600+ Skt939 2.4Ghz 512KB Processor?
    Once again many thanks for your help.
    Gazza.

  • CPU cooler for HP Pavilion m9340f

    My CPU fan is kaput. Already replaced fan once. Wanted to replace whole unit. Nothing fits. Old heatsink is screw-in. Can't seem to find replacement unit with screw-in heatsink and 4 prong fan plug. I've searched Fry's, Tiger direct. Now using unit that doesn't fit and is bad for long-term survival of cpu. Any suggestions? Motherboard is ASUS IPIBL-LB, called Benicia by HP. Replacement heatsinks for socket 775 seem to all be punch-in units.
    This question was solved.
    View Solution.

    This is the part:
    Heat Sink [Chassis Parts] 5187-8413   Contact Reseller  
    Heat sink for Intel processors (Class F)
    RoHS: Modified
    Here it is on eBay for about $20 shipped:
    http://www.ebay.com/itm/5187-8413-HP-HEATSINK-INTE​L-PROC-PAVILION-F-CLASS-COMPAQ-USA-SINK-HEAT-COOLI​...
    If this is "the Answer" please click "Accept as Solution" to help others find it.

  • Blank screen after CPU upgrade for CQ60-119 series

    Hi all.
    The model:
    I recently decide to upgrade my Compaq Presario CQ60-119TU purchased in 2008.
    The upgrades:
    My son will use it to play some games on it. Yes I know - it only has an integrated 4500M graphics chip - but this should be fine for Spore.
    Apart from changing from 2 to 4Gb of Ram I will swap out the 250Gb to a 640Gb hard drive.The CPU is also being swapped out.
    Existing CPU: Intel Celeron T1600 (1M Cache, 1.66 GHz, 667 MHz FSB)
    Replacement CPU: Intel Core 2 Duo T9600 (6M Cache, 2.80 GHz, 1066 MHz FSB)
    The laptop manual states this CPU as the best spec'ed replacement CPU I can put in the laptop.
    Prior to this I upgraded to the lated bios which is F.65. All was working well with the T1600 at this time.
    Problem:
    After replacing the CPU and pressing the power button the laptop boots up briefly for a couple of seconds and then powers off for a couple of seconds. It reboots and stays on (CPU fan is running) but there is nothing on the screen at any time.
    If I replace the old CPU and the machine boots up with the screen displaying text  so video  appears not to be the issue (well ...not broken at least)
    Any suggestions on how to get this CPU to work or is the CPU defective? Thanks in advance.

    Have a look here and you'll see that having the wrong mobo northbridge chipset (not compatible with the FSB of the processor) will cause the T9600 not to work. If you have the GL40 chipset forget trying to get this processor to work with your existing motherboard. If you have the GM45 chipset then your issue is probably something else.
    Don't know what your chipset is? Download the free utiliy CPU-Z and run it.
    FYI - The same model motherboard with the GM45 chipset is a 485219-001. 

  • Can I buy a new Logic Board for an iBook G3 700 12"?

    The Logic Board in my iBook G3 700 12" just died. My local reseller says it doesn't qualify for the replacement program.
    Anyone know where can I get a NEW Logic Board for my iBook?
    I don't like the thought of buying a used on on eBay and having the same problem 6 months from now.
    Thanks!
    Awfers

    Hi, and welcome to Apple Discussions.
    Yes, but the best place I know actually installs it for less money than they charge you for buying one outright:
    http://www.dttservice.com/ibookg3.html#ibookrepair
    They offer a six-month warranty, which is better than most places (including Apple's own 90-day warranty on repairs).

  • Where can I purchase a Logic Board for a 24" Apple Cinema Display?

    My 24" Cinema Display started to flicker and black out shortly after I purchased my most recent MacBook Pro.  Apple felt that the issue was the MacBook Pro so they replaced it.  The problem continued so they suggested I take the Cinema Display to the Genius Bar.  The display was out of warranty and the Apple Genius felt the issue was a bad display even after I told him I smelt silicon burning just before it went out completely.  He said that he could "depot" the unit and have it repaired for ~$600.  Due to the high cost of repair, I chose to purchase a new Thunderbolt Display instead.  Recently, I opened the old Cinema Display and found that the Logic Board is fried.  I have ordered a new board from 2 different Web retailers.  Both accepted the purchase as "in stock" but then stated they could not get the board from Apple.  Where can I purchase the Logic Board for a 24" Apple Cinema Display?
    Many thanks!

    I was very interested to read this document.  I think there is a problem with the Cinema Display and that it is frying the computer.
    My husband bought each of us a macbook pro.  His was hooked up to the cinema display.  After about a year, his MBP started to suffer intermittent failures where it would suddenly shut off and have to be hard rebooted.  After 2 years, the power or logic board on his MBP completely failed. He bought a new MBP and a Thunderbolt display, and I inherited his Cinema Display for use with my original MBP. 
    After one month of use with the cinema display, my MBP started to have the same problems.  It has to be hard rebooted almost every time I disconnect or reconnect with the cinema display.  I went to the Genius bar, and they confirmed that my MBP logic board needs to be replaced; I'm just holding out until spring break to take it back in, as they say it may take a week.  Fortunately, I have AppleCare for my MBP.
    Our cinema display is 3-4 years old, but it looks like, even though it appears to be working, I should probably get rid of it.  I can't keep frying computers! 
    I'm posting this because I'm wondering how many others are experiencing this problem.

  • How to define CPU sets for different hardware cores?

    We're doing a small benchmarking research on parallel benefits of Niagaras, and as one part of
    the research, we want to find out whether there are performance differences between hardware
    CPU cores and strands within a core. From theory, only one strand of a core is executing at any
    given moment, others are "parked" while waiting for IO, RAM, etc. So it may be possible to see
    some difference between a program running with 4-processor "pset"s, i.e. 4 strands of one core
    and 4 separate cores.
    While I can use psrset or poolcfg/pooladm to create and bind actual processor sets consisting
    of a number of processors, I have some trouble determining which of the 32 CPU "id numbers"
    belong to which hardware core.
    On a side note, an X4600 server with two boards lists 4 "Dual-Core AMD Opteron(tm) Processor
    8218 CPU #" entries in prtdiag, but 8 "cpu (driver not attached)" entries in prtconf, and
    Solaris recognizes 8 processors in pooladm. Again, there's no clue which of these 8 processor
    cores belongs to which socket, and this information could be important (or at least interesting)
    for SMP vs. NUMA comparison within otherwise the same platform.
    So far the nearest ideas I got were from some blog posts about pooladm which suggested to
    make a CPU set for a worker zone with CPU IDs 0-28, and moving hardware interrupts to CPU
    IDs 29-31. I could not determine whether these are single strands of separate cores, or 3 of 4
    strands on a single core, or some random 3 strands how-ever Solaris pleases to affine them?
    Is this a list defined somewhere (i.e. IDs 0-3 belong to core 0, IDs 4-7 belong to core 1 and so
    on, according to Document X) or can this be determined at runtime (prtdiag/prtconf)?
    Is this a fixed list or can the "strand number-CPU core" relations change over time/reboots?
    Perhaps, does Solaris or underlying hardware deliberately hide this knowledge from the OS
    administrators/users (if so, what is the rationale)?
    Finally, am I correct to believe I can place specific CPU IDs into specific psets via pooladm?
    Looking at /etc/pooladm.conf I think this is true (the default pool lists all CPU IDs of the
    system), but wanted some solid confirmation :)
    Thanks for any ideas,
    //Jim

    A Sun Fire E2900 with 4 dual-core UltraSPARC-IV chips:
    # prtdiag
    System Configuration: Sun Microsystems  sun4u Sun Fire E2900
    System clock frequency: 150 MHZ
    Memory size: 16GB      
    ====================================== CPUs ======================================
                   E$          CPU                  CPU
    CPU      Freq      Size        Implementation       Mask    Status      Location
      0,512  1350 MHz  16MB        SUNW,UltraSPARC-IV    3.1    on-line     SB0/P0
      1,513  1350 MHz  16MB        SUNW,UltraSPARC-IV    3.1    on-line     SB0/P1
      2,514  1350 MHz  16MB        SUNW,UltraSPARC-IV    3.1    on-line     SB0/P2
      3,515  1350 MHz  16MB        SUNW,UltraSPARC-IV    3.1    on-line     SB0/P3
    # psrinfo -p -v
    The physical processor has 2 virtual processors (0 512)
      UltraSPARC-IV (portid 0 impl 0x18 ver 0x31 clock 1350 MHz)
    The physical processor has 2 virtual processors (1 513)
      UltraSPARC-IV (portid 1 impl 0x18 ver 0x31 clock 1350 MHz)
    The physical processor has 2 virtual processors (2 514)
      UltraSPARC-IV (portid 2 impl 0x18 ver 0x31 clock 1350 MHz)
    The physical processor has 2 virtual processors (3 515)
      UltraSPARC-IV (portid 3 impl 0x18 ver 0x31 clock 1350 MHz)
    # prtconf | grep cpu
                cpu (driver not attached)
                cpu (driver not attached)
                cpu (driver not attached)
                cpu (driver not attached)
                cpu (driver not attached)
                cpu (driver not attached)
                cpu (driver not attached)
                cpu (driver not attached)A 6-core single-T1 Sun Fire T2000:
    # prtdiag
    System Configuration:  Sun Microsystems  sun4v Sun Fire T200
    System clock frequency: 200 MHz
    Memory size: 8184 Megabytes
    ========================= CPUs ===============================================
                                CPU                 CPU 
    Location     CPU   Freq     Implementation      Mask
    MB/CMP0/P0   0     1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P1   1     1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P2   2     1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P3   3     1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P4   4     1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P5   5     1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P6   6     1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P7   7     1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P8   8     1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P9   9     1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P10  10    1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P11  11    1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P12  12    1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P13  13    1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P14  14    1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P15  15    1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P16  16    1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P17  17    1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P18  18    1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P19  19    1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P20  20    1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P21  21    1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P22  22    1000 MHz SUNW,UltraSPARC-T1          
    MB/CMP0/P23  23    1000 MHz SUNW,UltraSPARC-T1    
    # psrinfo -p -v
    The physical processor has 24 virtual processors (0-23)
      UltraSPARC-T1 (cpuid 0 clock 1000 MHz)
    # prtconf | grep cpu
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)
        cpu (driver not attached)//Jim

  • 100 degrees + Normal for CPU temp?

    Apple recently replaced my logic board for the 2nd time in my SR MBP- now under a load (generating previews in Aperture, Rendering in Compressor or FCP) it runs at 101-104 celcius- with the occasional crash. I havent seen it go 105 as the machine shuts down (with fans at 6k). As I recall, my first run logic board never went over 99.......
    Apple genius wasn't able to replicate the issue, and they are telling me up to 107 degrees is considered normal and acceptable. Can anyone shed some light on their temps? Should I press back on this? I routinely do 8-13 hour renders, and it kills me when I have to start over.

    I should probably also note that since the most recent LB replacement (and the higher temps) the battery swelled up.
    So far they have told me the battery is the only thing they have found wrong.

Maybe you are looking for