Replacement of # sign (not assigned) with blanks

Hi guys,
I know this problem was already questioned many times on the forum, but I still haven't found any proper solution for it, so here I am asking again..
A BEx query shows blanks for fields without values. In Webi reports the cells are displaying "#" sign for measures and dates. I need to get rid of this sign and just to have the cell with blank where no value is.
The best answer i found so far was on the post: http://scn.sap.com/thread/3276897 . I tried using conditional rule based on formula if([object]=("Not Assigned" or "#######");"";[object]) but when i run the report i have a strange error repeng_error_en_71 (WIS 00071) as in attachment.
Can anybody advice on this issue?
Thank you in advance,
Gabriel

A solution for this would be:
     Create a Condition Rule based on formula: = [object] = "#"
     Then in the Format - Display put " " (without quotes).
     That means for each case the object is #, display blank.
     The downside for this way is that a condition must be created for each column.
A second simpler and straightforward solution is to create a simple condition if Cell Content is # to display blank:
This rule can be applied to all columns.

Similar Messages

How to replace # or Not assigned with blank in BEx Query Output.

Hi,
While running the query through BEx Query desginer or Anlayser, I am getting # or Not assigned where there are no values.
The requirement is to "Replace # or Not assigned with a blank" in the output.
I want to know, is there any setting in BEx query desginer where we can do this. How to do this.
Please share your inputs on this. Any inputs on this would be appreciated.
Thanks,
Naveen

Check out SDN-thread: "Re: Remove 'Not assigned'" for more details
Ideas from SDN research:
"a solution i have used is to put each RKF column in a CKF colum then in each CKF use RKF + 0, the outcome is that your # should now be 0s, in the query properties you can set the option to display 0s as blank."
"try to enter a text for the blank entry in the master data maintenance of the relevant objects and set the display option for the objects to 'text'."
Threads:
SDN: How to replace # or Not assigned with blank in BEx Query Output.
SDN: Re: Remove 'Not assigned
SDN: How to replace # or (Not assigned) with blank in BEx Query Output.
SDN: Bex Analyzer : Text element system's table ?
SDN: change message in web application designer ["nonavailable" -> 136 of SAPLRRSV]
SDN: Not Assigned ["Not Assigned -> 027 of SAPLRRSV]
SDN: replacing '#'-sign for 'not assigned' in queries
SDN: # in report when null in the cube
SDN: How to replace '#' with blank when there is no value for a date field
Edited by: Thomas Köpp on Sep 13, 2010 5:20 PM

Table class interface to replace Not assigned with blank

Hi,
I have some of the values for characterstic as Not assigned I wan to replace it with blank in my webreport
when I want to replace #with blank I have written the following code
In method CHARACTERISTIC_CELL I have written th following code
IF I_CHAVL EQ '#'.
 replace '#' with '-' into c_cell_content.
 replace '#</a>' with '-</a>' into c_cell_content.
ENDIF.
but when I wan tot replace Not assigned with blank witht the following code its not working
IF I_CHAVL EQ 'Not assigned'.
 replace 'Not assigned' with '-' into c_cell_content.
 replace 'Not assigned</a>' with '-</a>' into c_cell_content.
ENDIF.

See SDN-thread "Re: Remove 'Not assigned" in which you should modify the text elements in SAPLRRSV
(do not know, if this works; it is a modification which affects the whole system).
Ideas from SDN research:
"a solution i have used is to put each RKF column in a CKF colum then in each CKF use RKF + 0, the outcome is that your # should now be 0s, in the query properties you can set the option to display 0s as blank."
"try to enter a text for the blank entry in the master data maintenance of the relevant objects and set the display option for the objects to 'text'."
Threads:
SDN: How to replace # or Not assigned with blank in BEx Query Output.
SDN: Re: Remove 'Not assigned
SDN: How to replace # or (Not assigned) with blank in BEx Query Output.
SDN: Bex Analyzer : Text element system's table ?
SDN: change message in web application designer ["nonavailable" -> 136 of SAPLRRSV]
SDN: Not Assigned ["Not Assigned -> 027 of SAPLRRSV]
SDN: replacing '#'-sign for 'not assigned' in queries
SDN: # in report when null in the cube
SDN: How to replace '#' with blank when there is no value for a date field
Edited by: Thomas Köpp on Sep 13, 2010 5:18 PM

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?

T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?
Solved!
Go to Solution.

What lead_org is referring to is commonly known as "re-balling" which involves unsoldering the Southbridge chip from the planar, replacing all (6-700) solder balls with new ones and then re-attaching it under heat/pressure.
This is the place that you need:
http://www.theboardroom.info/index.html
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Replacement iPhone will not sync with existing library on external HD

I had an iPhone, and all of my music is on an external hard drive. Everything synced and worked great, no problems. However, the Apple store just replaced my iPhone on a warranty issue, and now my iPhone will not sync with my itunes. Itunes and my external hard drive work great, but the minute i plug in my new replacement iPhone, it instantly crashes my external hard drive and will not sync any of my music. Ideas?

Hi,
The issue might be caused by the USB connection. Try directly connecting both devices to a high-speed USB2 port on the PC.
This article: http://support.apple.com/kb/TS1286 provides additional USB troubleshooting tips.
Also, make sure you have the latest version of iTunes installed on your PC.
http://www.apple.com/itunes/download/
-Jason

Marketing attribute not assignable with language PL

Hi *,
I have detected a strange behaviour when maintaining "some/special" marketing attributes for BP in logon language PL.
The affected attributes are configured as follows.
Format                   No. Chars      Dec.Places      Meas. unit      Sing-val
Numeric Format         3                    0                    %                   X
The usage for EN/DE is fine but when trying to maintain a value like '30' using logon language PL the below mentioned error occurs. But obviously I don't use intervals etc. Just a single figure.
Attributes with the following settings do not lead to an issue:
Format                   No. Chars      Dec.Places      Meas. unit      Sing-val
Numeric Format        10                    0                                          X
DETAILS ON ERROR-MESSAGE
Diagnosis
Possible causes:
Intervals can only be specified if you have set the indicator Intervals
Allowed.
You must specify the interval in the form value 1 - value 2 (there must be a
space both before and after the hyphen). No other character except a hyphen may
be used to separate the values.
A value can contain up to the same number of decimal places as specified in
the Decimal Places field.
The value in the field Number of Chars defines the total number of
characters, including decimal places (for example: If the number of characters =
3, and the number of decimal places = 1, then 20.1 is valid, but 300.1 is not
valid).
You must define the decimal point and the thousand separator according to
your user settings.
Procedure
Use the value help, if available, to select a permitted
value. If there is no value help available, check the data type of the marketing
attribute."
To exclude the possibilty the attribute could be "damaged" I created a new one with same options and got the same language dependend behaviour.
Any ideas?
Kind regards
Thomas

Any ideas/impressions?

Replacement iPhone will not link with MB

I just received a replacement iPhone due to a bad battery. Although the original iPhone linked to the Bluetooth in my MB flawlessly, I cannot get my replacement to do the same.
I can authorize the phone and Mercedes shows it as linked, yet the iPhone does not see the MB bluetooth and will not link.
Any thoughts? Thanks!

Bruce,
Try resetting all network settings, and forgetting all pairing on the car's bluetooth as well.
Then try repairing.
Hope this helps,
Nathan C.

My new (replacement) iPhone will not sync with iTunes on my Macbook.

My old (two weeks old, replacement of an old broken one) iPhone sync'd just fine, but kept going off. The new one will not sync at all, nor will it save my email passwords. Any clues?

Did you try to set it up as new device, without using the latest backup, in case it contains corrupt data?
How to back up your data and set up as a new device

Replacing # with blank space in Bex Analyser

Hi All,
Can any one help me out in replacing # values in Bex analyser with blank space.
I tried with the macro:
Sub SAPBEXonRefresh(queryID As String, resultArea As Range)
' First Query in the workbook
If queryID = "SAPBEXq0001" Then
' Selects the area where the report query is rendered
resultArea.Select
'Replace "" with 0
Selection.Cells.Replace What:="", Replacement:="0", LookAt:=xlWhole, _ SearchOrder:=xlByRows, MatchCase:=False, MatchByte:=True
End If
End Sub
Means I have include the macro to the Excel, but still it is not working.
If this macro is the correct solution, then may be I am not using it properly(in the sense I'm not calling with proper syntax).
Please provide me with the solutiuon to get rid of this problem.

Hi,
We are using BEX 7.0.
I got a macro code which is working. The code is as follows.
Dim resultArea As Range
Set resultArea = varname(1)
Dim c As Range
For Each c In resultArea.Cells
If c.Value = "#" Then c.Value = " "
Next c
This works fine but the problem is that this macro code should be added each and every time when the query is run.
Can any one suggest me where the code can be added in Bex Analyzer itself, so that when the query is run the above macro runs along with it and removes the #.
Thanks and Regards,
Geetha.

Why PO is automatically assigned with release strategy?

I created a PO with PO document type NB and NB is not assigned with any release strategy.
But the PO with NB type is automatically assigned with release stragety when I save it as a completed PO. Why?
And only when the PO is in held status, there is no release strategy assigned to NB PO.
Is the normal ERP behavior?
I only assigned a release strategy to PO document type DB, which means dummy document type.

Please check the release strategy of PO, whether document type NB is assigned to it. May be you are checking the wrong release strategy. Look up the release strategy under CLASSIFICATION button, may be if multiple release strategies are used, your document type is assigned to some other strategy.
Easier way to check which strategy is getting applied, is in PO release strategy look up rel. strat No. which will come under release group, look up in spro with this release strategy no. in spro which will shorten your search.
Edited by: Afshad Irani on Jun 3, 2010 1:58 PM

Do not show the # values should be replaced with blank at report

Dear All,
There is a requirement do not show the null (#) values at report level for characterstics fro example for onedocument there is no notification type in report for that document it is coming with null value but i do not want that null value in report it should be blank
any suggestions please,mostly provide the information at report level,but at cube level any options at the time loading( through start routine)
Thanks & Regards
sathish

Hi Satish,
There is one tcode where u can keep ur symbol defined say blank to show in report when null values occur... i didnt rememeber tcode i will tell you as soon i get it....
but it will effect not only this query but all the queries so it is upto u....
and at cube level u can write a routine to check ...
if this field value is initial .
change it with blank
else
leave it.
hope it helps...
regards
vamsi
Edited by: vamsi talluri on Mar 15, 2009 10:33 PM

How to replace a character in a string with blank space.

Hi,
How to replace a character in a string with blank space.
Note:
I have to change string CL_DS_1===========CM01 to CL_DS_1 CM01.
i.e) I have to replace '=' with ' '.
I have already tried with REPLACE ALL OCCURRENCES OF '=' IN temp_fill_string WITH ' '
Its not working.

Hi,
Try with this..
call method textedit- >replace_all
exporting
 case_sensitive_mode = case_sensitive_mode
 replace_string = replace_string
 search_string = search_string
 whole_word_mode = whole_word_mode
changing
 counter = counter
exceptions
 error_cntl_call_method = 1
 invalid_parameter = 2.
Parameters Description Possible values
case_sensitive_mode Upper-/lowercase false Do not observe (default value)
 true Observe
replace_string Text to replace the
 occurrences of
 SEARCH_STRING
search_string Text to be replaced
whole_word_mode Only replace whole words false Find whole words and
parts of words (default
value)
 true Only find whole words
counter Return value specifying how
 many times the search string
 was replaced
Regards,
Jayaram...

Conversion of value 'blank' to # (Not assigned)

Hi,
We have extended the DataSource 0CA_TS_IS_1 with the field ZZAWART att/abs type. The component type is AWART and domain is AWART. This domain has no Conversion routine.
We have created a filter on this field in the dtp from one DSO to another DSO. In this filter we would like to add the value # (not assigned). Our problem is that when this field has no value in the source system, it is not converted to #.
I changed the conversion routine in the DataSource in BW to ALPHA and also changed the format from internal to external but this did not solve the problem.
How can we get the blank value converted to #?
Thanks.
Best regards,
Linda

Hi Linda,
It is a bit strange that you dont have the posibility to filter by equal to blank.
Don't choose the value from the match code in DTP, try the following:
1.- Press on the arrow (Multiple selection).
2.- In the "Select Single Value" tab you will have 2 fields (a) Options pushbutton (b) Single Value.
3.- Click on the PushButton for the first row, ther you will have some option: (a) = Single Value; (b) >= Grather than or equal to; (c) <= Less than or Equal to; (d) > Greater than; (e) < Less than; (f) <> Not Equal to.
4.- Choose (a) = Single Value, and leave the Select Value column in blank.
Regards, Federico

Show blank texts instead of key or 'not assigned' in query-result

Hi,
is there a way / workaround to
1. suppress # / 'not assigned' in query results?
or
2. show blank texts (if maintained) instead of the key
(when showing texts for a characteristic in a query all characteristics with blank texts - none or ' ' -
will show the key instead of the blan text) ?
Thanks,
Christoph

Hi Christoph,
there have been several posts concerning this topic. As Saad told there is no direct way within SAP standard to reach this aim.
Depending on the Front-End Tools you are using these posts may help:
Not assigned and # in BEX 7.0 WAD
how to set field to blank if the data is # or unassigned
Brgds,
Marcel

After installing windows xp accidentlly i erased macintosh hard disc. Now my macbook shows blank white screen with sign of folder with '?' blinking. Now what to do please help

After installing windows xp accidentlly i erased macintosh hard disc. Now my macbook shows blank white screen with sign of folder with '?' blinking. Now what to do please help

Avoid using hand-tools or power equipment .
"My mac book did not come with dvd. Now what should i do?"
Bring it to the Apple store. They can help.

Replacement of # sign (not assigned) with blanks

Similar Messages

Maybe you are looking for