Replacing Overall Budget values with Assigned budget values.
Hello Experts,
My planned overall budget was 16 crore and assigned budget is 15 crore in project header comprising of some -ve available budget against some child level wbs.
Now, against some project i used CJ30 and replaced the amount but some projects are not allowing me to do the same.
In those projects against few child wbs budget is -ve and at parent wbs its +ve available budget.
When I am doing replacement for this parent wbs system is not allowing.
Please suggest.
Thanks & Regards,
saurabh
Experts,
Once the budget is Distributed, is it possible to decrease the value of distributed budget.?
i am trying but in vain..
please help.
thanks
ankur
Similar Messages
-
How can I replace column value with a particular value in SQL
Hi All,
Can anyone please tell me how can I format my output with replacing a column value with a specific value which actually depends on the present value of the column
I am executing the following SQL statement
select state,count(id) from <table_name> where composite_dn= <composite_dn_name> group by state;
My Present output is:
State No.Of Instance
1 3
3 28
I want to replace the value in the column state as follows
State No.OfInstances
Completed 3
Faulted 28
I want "1" to be reppaced by "Completed" and "3" to be replaced by "Faulted"
Is is possible with SQL or PL/SQL , if it is then how can I achieve this required result. Please help!!
Thanks in Advance!!
Edited by: Roshni Shankar on Oct 27, 2012 12:38 AMHi Roshni,
I guess this CASE clause can be simulated by a DECODE and also it is very easy to use.
Refer -- http://www.techonthenet.com/oracle/functions/decode.php
select decode(t1.state,t2.state_id,t2.state_name), t1.count_id
from <table_2> t2, (select state,count(id) count_id
from <table_name>
where composite_dn= <composite_dn_name>
group by state) t1
where t1.state = t2.state_id;HTH
Ranit B.
Edited by: ranit B on Oct 27, 2012 2:02 PM
-- link added
Edited by: ranit B on Oct 27, 2012 2:19 PM
-- sample code added -
Charge sales order value with a minimum value
Dear All,
I have one requirement where I would like to charge my sales order value with a minimum value. For example, a minimum sales order value requirements are set at $1,400.00 (the minimum values can be different based on the different materials) per order, if the value of the order exceeds $1,400.00, therefore no minimum fee is applied or displayed and the customer is charged the actual value of the order; if the value of the order is less than the minimum thus the customer is charged the minimum. We also can set the minimum as quantity.
Is there any standard functionality through which this can be done.. or any suggestion?
Your help is highly appreciated.
Thanks and best regards,
JoYou can maintain the Condition Record with Condition Type as AMIW wrt to Division & Price Group.You can change the Accesses as per your requirements.
Best Regards,
Ankur -
Set JArray values with invalid key value: "LastUpdatedTime" on new alert rule creation
Hey all!
I'm trying to create a new alert rule using version 0.9.11 of the Monitoring Library and am getting this error on alertsClient.rules.CreateOrUpdate:
"Set JArray values with invalid key value: "LastUpdatedTime". Array position index expected."
That's interesting because LastUpdatedTime is a DateTime object, and whether I set it or I don't, if I set a breakpoint, it does set itself correctly, but the API appears to be expecting a JSON hash?
I've tested alertsClient and I'm able to get existing alerts (also metrics with metrics client), so I don't believe it's an access issue.
Any ideas?
The full code I'm using for the test (borrowed virtually verbatim from the Cloud Cover video
here):
Rule newRule = new Rule
Name = "CPU Over 90%",
Id = Guid.NewGuid().ToString(),
Description = "CPU Has been over 90% for 5 minutes",
IsEnabled = true,
LastUpdatedTime = DateTime.Now,
Condition = new ThresholdRuleCondition
Operator = Microsoft.WindowsAzure.Management.Monitoring.Alerts.Models.ConditionOperator.GreaterThan,
Threshold = 90,
WindowSize = TimeSpan.FromMinutes(5),
DataSource = new RuleMetricDataSource
MetricName = "Percentage CPU",
ResourceId = "",
MetricNamespace = ResourceIdBuilder.BuildCloudServiceResourceId(<cloudservicename>, <deploymentname>)
RuleAction action = new RuleEmailAction
SendToServiceOwners = true,
newRule.Actions.Add(action);
OperationResponse alertResponse = alertsClient.Rules.CreateOrUpdate(new
RuleCreateOrUpdateParameters { Rule = newRule });
Console.WriteLine("Create alert rule response: " + alertResponse.StatusCode);Hi Greg,
Thanks for your post!
Error "JArray" has been fixed in the latest nugget package.
Refer to:
http://www.nuget.org/packages/Microsoft.WindowsAzure.Management.Monitoring/
Hope this helps!
Regards,
Sadiqh -
Value field assigned to value category
HI ALL,
WHILE DOING GR I AM GETTING ERROR "Value field assigned to value category".
PLEASE HELP
THANKS IN ADVANCE
SRIDHARHI ALL
Message no. ZK001
THANKS,
SRIDHAR -
Compare the current value with the previous value in the same column
Hi all,
I have to include a statement in a query which allows to compare the current value of column A with the previous value of column A (same column). from there, I need to add a condition in order to have the expected result.
Let's take an example to illustrate what I want to achieve:
I have the following columns in table called 'Charges':
Ship_id batch_nr Order_nr Price
SID1111 9997 MD5551 50
SID1111 9998 MD5552 50
SID1111 9999 MD5553 50
SID2222 8887 MD6661 80
SID2222 8887 MD6662 80
SID2222 8887 MD6662 80
SID3333 6666 MD7771 90
I want to check if the ship_id of row 2,3 (and more if available) is equal to the ship_id of row 1.
If it is the case, then value 'together with the first batch_nr' in row 2 and 3 under Price column. If not, then keep the original value of Price column
PLease see below the expected result:
Ship_id batch_nr Order_nr Price
SID1111 9997 MD5551 50
SID1111 9998 MD5552 together with 9997
SID1111 9999 MD5553 together with 9997
SID2222 8887 MD6661 80
SID2222 8887 MD6662 together with 8887
SID2222 8887 MD6663 together with 8887
SID3333 6666 MD7771 90
Thanks in advance for your help, it is really urgent.
Imco20030Hi,
user11961002 wrote:
Hi,
Here is the query that I use:
[ select
sl.ship_id,
o.ordnum,
o.reffld_5 "BatchNR",
sum(tc1.chrg_amt) "FreightPRC",
sum(tc2.chrg_amt) "FuelPRC",
sum (tc1.chrg_amt + tc2.chrg_amt + tc3.chrg_amt) "Total Price"
from ord_line ol
join ord o on (ol.ordnum = o.ordnum and ol.client_id = o.client_id)
join shipment_line sl on (ol.ordnum = sl.ordnum and ol.client_id = sl.client_id and ol.ordlin = sl.ordlin)
join adrmst a2 on (o.rt_adr_id = a2.adr_id)
left join tm_chrg tc1 on (tc1.chargetype = 'FREIGHT' and tc1.chrg_role = 'PRICE' and tc1.ship_id = sl.ship_id)
left join tm_chrg tc2 on (tc2.chargetype = 'FUELSURCHARGE'and tc2.chrg_role = 'PRICE' and tc2.ship_id = sl.ship_id)
where sl.ship_id = 'SID0132408'
group by o.client_id, o.ordnum, o.reffld_2, sl.ship_id, a2.adrnam, a2.adrln1, a2.adrpsz, a2.adrcty, a2.ctry_name,
o.reffld_5, ol.early_shpdte
order by ship_id
]That looks like the query you were using before you started this thread.
Modify it, using the analytic fucntions FIRST_VALUE and LAG, like I showed you.
I see that you did simplify the problem quite a bit, and it's good that you did that.
It doesn't matter that your real problem involves joins or GROUP BY. Analytic functions are calculated on the results after all joins and GROUPS BYs are done. Just substitute your real expressions for the simplified ones.
For example, in your simplified problem, there was a column called order_nr, but I see now that's it's really called o.ordnum. Where the solution I posted earlier says "ORDER BY order_nr", you should say "ORDER BY o.ordnum".
Here's a less obvious example: in your simplifed problem, there was a column called price, but I see now that it's really SUM (tc1.chrg_amt + tc2.chrg_amt + tc3.chrg_amt). Where the solution I posted earlier says "TO_CHAR (price)", you should say "TO_CHAR (SUM (tc1.chrg_amt + tc2.chrg_amt + tc3.chrg_amt))". (You can't use an alias, like "Total Price", in the same SELECT clasue where it is defined.)
I removed some columns from the select as they are not relevant for the wanted action like 'adress details or other references'.
Now here is the result:
Shipment ID Order Number WMS Batch Freight Fuel Price Order Total Price
SID0132408 MDK-000014-05602649 04641401 110 10 120
SID0132408 MDK-000014-05602651 04641402 110 10 120
SID0132408 MDK-000014-05602652 04641363 110 10 120
as you can see, the 3 orders have the same shipment ID.
The expected result should be shown under column 'Total Price' as follows:
Shipment ID Order Number WMS Batch Freight Fuel Price Order Total Price
SID0132408 MDK-000014-05602649 04641401 110 10 120
SID0132408 MDK-000014-05602651 04641402 110 10 tog with 04641401
SID0132408 MDK-000014-05602652 04641363 110 10 tog with 04641401Okay, so those are the correct results that I asked for, plus the incorrect results you're getting now. Thanks; extra information doesn't hurt.
But where is the raw data that you're starting with?
It looks like you tried to format the code (but not the results) by typing this 1 character:
before the formatted section and this different character
after the formatted section. To post formatted text on this site, type these 6 characters
before the formatted section, and the exact same 6 characters again after the formatted section. -
How to replace a "notfound" output with a null value?
hi,
I'm just getting a output of "Rows Notfound" for a script..
instead of this , i just need to show the output with a record as null value or some value..
do we have any option to use this in oracle..Apart from capturing with an exception in PL/SQL code, if you're wanting something in a script as pure SQL, you'd have to generate an additional row and only select that where no data is found e.g...
SQL> ed
Wrote file afiedt.buf
1 select ename from emp where ename = 'FRED'
2 union all
3* select 'No Data' from dual where not exists (select * from emp where ename = 'FRED')
SQL> /
ENAME
No Data
SQL>Of course this does effectively double-up on the queries being executed, so if you're dealing with a heavily complex query, it may be best just just have the regular exception come out, but then this will also depend on your actual requirements and why you want to do this in the first place. -
How to replace the string of column value with other column value in same table
I have a temp table which contains
Id Name CTC Address Content
1 Ross $200 6th block Dear #Name your CTC is #CTC and your address is #address
2 Jhon $300 1oth cross Dear #Name your CTC is #CTC and your address is #address
Now i want to select content so that it should get replace with the respective columns and final output should come like this
Dear Ross your CTC is 200 and your address is 6th block
Dear Jhon your CTC is 300 and your address is 10th cross
Kindly suggestI think RSingh suggestion is ok ... what do you mean by another way? ...maybe something more generic?
maybe build a table whith the list of col you need to "replace" and dinamically build the replace query ...
declare @colList table(colName varchar(100))
insert into @colList
select 'name'
union all select 'ctc'
union all select 'address'
declare @cmd varchar(2000)
select @cmd='select '+ (select 'replace(' from @colList for xml path('') +' content '+
(select ',''#'+ colName +''', '+ colName +')' from @colList for xml path(''))
+' from YOURTABLENAME '
exec (@cmd)
or your request was different ? -
How to replace a table name with an item value in report region SQL query?
I've got a SQL query in a report region that goes like this:
SELECT :P30_HIDDEN FROM v_dms_dataset
GROUP BY :P30_HIDDEN
P30_HIDDEN is populated from a textfield input. Why doesn't this work, and is there a way to achieve what I'm trying to do here? I really need the ability to dynamically generate SQL queries in this way.Ben - you could either:
1. case when :P30_HIDDEN = 'COL1' then col1 else ... end
in order to determine which column to select (only really useful if you have a small number of predetermined columns to select from), or
2. generate the SQL dynamically.
Set the report region to SQL Query (PL/SQL function body returning SQL query), then have something like:
declare
l_sql VARCHAR2(4000);
begin
l_sql := 'SELECT ' || :P30_HIDDEN || ' FROM v_dms_dataset
GROUP BY ' || :P30_HIDDEN;
return l_sql;
exception
etc.
end;
John. -
Assigning Javascript value to ABAP variables
Hi Experts,
I have written the HTML code mixed with Javascripts to create a table in the 'View' of a BSP Component.
I was able to set the value of assign the value of ABAP parameters into HTML fields.
This table has some input fields. I need to fetch the value of input parameters which has been entered by screen on an event which is present in Overview Page.
I can calulate the value mentioned in input field but i am not able to assign the same value to ABAP parameter for further processing.
I have already referred the following link but it did not work.
Assign Javascript variable to Abap variable
Please help me how i should i acheive it.
Thanks In Advance,
Rajeev SinghHi,
I am not understanding your problem and what you want due to description, but it seems to be very similar to a post which I answered very recently [here|How to return values from a BSP page to Javascript;. -
Overwrite the system calculated VAT - Condition Value with Inbound VAT Amou
Hello experts:
We have a following requirement in my customer for Inbound VAT Processing.
We want to overwrite the system calculated VAT - Condition Value with Inbound VAT Amount
Details :
Aggregated sales Idoc ( WPUUMS01) is used here for posting the daily sale.
Inbound pricing procedure is ZPOS00 ( copy of POS000)
VAT is maintained with condition Type ZMWS. Using Tax Codes
When idoc get posted system calculates the ZMWS and working fine.
However we would like to overwrite this condition value with inbound condition value (from segment 5 of WPUUMS)
Example :
For Article A : inbound aggregated sales Amount= 100 INR and ZMWS is 10%( VAT code B1)
Then system will calculate 90 INR revenue and 10 INR as VAT
However due to rounding in POS system we may get from POS the VAT Amount =9.99 for example.
Tisak wants to overwrite the condition value 10 INR with 9.99 INR.
I will appreciate if anybody can suggest some approach or share experience if came across the same scenario (Tax condition type).
Thanks and regards,Hi,
Either you can use rounding in POS such that it round up for 9.99 to 10.
And then in SAP pricing procedure you can use alternate calculation type as 16 or 17 (17 should be used with decimal point assigned to currency for rounding like 2 decimal for INR).
doing this will also round the figure from 9.99 to 10 is SAP.
Hope this solves your query.
Regards,
Ashutosh -
Compare current value with previous value
Hello,
I would like to compare the current value with the previous value of the current value.
How can I solve this problem?
MauritsHi,
after going through the basics course you surely can understand that example:
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
Comparing the current value with the previous one in Powershell
Hi,
New to scripting and i was wondering how can I compare the current value with the previous value?
I am having trouble with the loop structure, and I am not sure I am on the right track...
I am trying to compare the record to next record in the same csv file after import-csv... My code runs fine, but is not giving the right result.
$FilePath = Get-FileName -initialDirectory "C:\"
#Testing for null
If($FilePath)
$Data = Import-csv -Path $FilePath | Sort-Object BUYER, {[int] $_.PO_NBR}, {[int] $_.LINE_NBR}
Foreach($fData in $Data)
$i = $fData
Foreach($i in $fData)
if($fData.Buyer -eq $i.Buyer)
#save all the same buyer name to a new variable
Write-Host "Same as previous"
Else
Write-Host "Variable is null"
Remove-Item function:\Get-FileNameThank you. The Foreach loop is now working properly.
Can I ask what is the purpose of "-ea 0" in the import-csv? I can't seem to find "-ea" as a parameter for import-csv in help.
-ea is short for -ErrorAction.
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing) -
Assign budget is three time of overall Budget in T-code CJ30
Dear Sir,
I am facing a problem in my one WBS of project that when i am seeing the assign amount in cj30 it is looking three times of my current budget but another reports like cje0 & ALR. reports it is seeing perfect value i can't understand how it's can happened.
Pls. advice.
Regards,
Vishal Kr. SharmaHi,
According to the SAP Performance assitant:
"Assigned consists of commitment and actual postings. In PS, it also includes plan values of assigned networks and orders."
so when you are in Tcode CJ30 goto EXtras>Availability control->Analysis.
this will help you understand the Assigned budget.
I will sugrest to Run Tcode:CJEN in case you have changed the AVAC settings after allocating the budget.
hope its useful.
Reward points if useful..
thanks.. -
Incorrect values in available budget in report S_KI4_38000050
Dear Experts,
We are getting incorrect values in available budget column against Fun/Fund center -commitment item in report S_KI4_38000050.
Actually we have posted entries against fund center/commitment item without releasing budget and it allowed post entries due to deactivated availability control.
Before Posting FI entry:
Release Budget=0
Assigned=0
Available=0
Commitment=0
After Posting entry of Rs. 5000
Release=0
Assigned= -5000
Available=5000
Commitment= -5000
Ques-1 Why available is 5000?
Now if I released some amount say 10000 then,
Release=10000
Assigned= -5000
Available=15000
Commitment= -5000
Ques-2 How to correct values mentioned above?
As I think, the correct values should be:
Release=10000
Assigned= 5000
Available=5000
Commitment= 5000
Regards
ShishirExperts...Waiting for your suggestions..
Maybe you are looking for
-
I have uninstalled the flash player and installed it numerous times with no recognition by the Firefox plug-ins. I also have uninstalled Firefox and reinstalled it as well. I have also restarted my computer several times as well. The flash player is
-
How to import the organization to BPM standalone 10g
I create the contents of the organiztion in BPM studio 10g. When I deploy the ###.exp file to BPM standalone 10g, the new roles can be mapped to BPM standalone. However, the participants' information cannot be imported. How to import the participants
-
Is there an "any" boolean function in LabVIEW?
I want to execute the statement, if any of the buttons on the front panel are false, do something else, do nothing. Is there a way to do this? Also, is there a way to go from the last frame in a sequence structure to the first frame, sort of like a "
-
Hi, This is the first time i need to work with voyager.please provide answers for the following questions.. 1)What exactly Voyager does? Is it doing Reporting or Analysis or both? 2)If it is a analysis tool,we can use BO itself.Then why we are g
-
Can iphone be tracked when it is used to surf the internet in wifi?
Can iphone be tracked using the wifi by capturing the MAC address when it is used to browse the internet ?If so then it can be used to track the lost phone..