Replicating ECC 6.0 BP's information into CRM5.0

Hello CRM Gurus,
I want Procedure to how to replicate ECC BP's information into CRM. Is it Possible?If Possible who to do that.
Thanks,
Feroz.

Hi Feroz,
There are two types of Customer Master Date in R/3:
a) the traditional customer date stored in the tables KNA1, KNVV etc. in R/3
b) the new BP customer data in ECC, stored in the tables BUT000 etc. in R/3. This is also used in some industry solutions such as IS-M.
If I understand correctly, you want to load the second type that is stored in tables BUT00 etc.
For the variety a), you need to use the object CUSTOMER_MAIN for the load from R/3 to CRM.
For the variety b), you need to use the object BUPA_MAIN for the load R/3 to CRM.
I have not seen any detailed documentation on the second variety yet, but the Best Practice: mySAP CRM Initial Download Configuration Guide (you can find it in the service Marketplace) at least briefly describes when to use which object.
Best regards,
Lorna

Similar Messages

How to write log information into SM37 batch job log

Hi,
I have a report running in batch mode, and I would like to log the start time and end time for some part of the code (different Function modules). I need to write this log information into the batch job log. Therefore I can check the time frame of my FMs.
After search the SDN, I can only get some information on how to write log into the application log displayed in SLG1, but that's not I want. I want to write batch log information, and check it in SM37.
If you have some solution or code to share, please. Thanks a lot.
Best Regards,
Ben

Hi Nitin
Thanks for the reply. Could you explain it with some code ?
I tried to use the write statement , but it did not wrok. I could not see the result in SM37.
write : "start of the FM1 processing".
FM1 code
write : "end of the FM1 processing".
but those two statement did not show in SM37..
1) how to use a information message ?
2) how to use NEW PAGE PRINT ON and PRINT OFF command. ?
I would appreciate if you can write some code ,that I can use directly.
Thanks a lot.
Best Regards,
Ben

Since switching to Yosemite, I am unable to paste any information into calendar events, instead having to type out all info such as location, notes, etc. This is true both in daily view and weekly/monthly views as well. Help?

Since switching to Yosemite, I am unable to paste any information into calendar events, instead having to type out all info such as location, notes, etc. This is true both in daily view and weekly/monthly views as well. Help?

You welcome

Is there a way to import specific information into a form?

is there a way to import specific information into a form?

No, we currently don't support preopulating a form.

HT1918 I have a new visa debit card, I have tryed several times to put in this new information into my IPad. The program keeps telling me. There's a billing problem with a previous purchase. Please update your payment method. The program will not let me u

I have a new visa debit card, I have tryed several times to put in this new information into my IPad. The program keeps telling me.
There's a billing problem with a previous purchase. Please update your payment method.
The program will not let me update, what am I doing wrong. rose165

I would love to have a phone number to call someone with apple on this issue.

I need to re-insert information into add-ons that need it everytime i restart my computer.

Everytime I restart my computer and open Firefox, I have to re-insert certain information into specific add-ons.
For instance, "Firefox Sync" doesn't sync until I enter my Firefox Sync account information as if I just installed it. This happens everytime I restart.
And "Webmail Notifier" loses my webmail account information. I have to re-enter the credentials for the 3 accounts I want it watching everytime I restart my laptop.
Out of all my add-ons, I think those are the only two having problems. Any suggestions?
All my plug-ins seem up to date, no viruses/spyware...

You may have a problem with the preferences file, for details on fixing that see https://support.mozilla.com/kb/Preferences+are+not+saved

Has anyone managed to get HP Warranty Information into SCCM?

Has anyone managed to get HP Warranty Information into SCCM?
I have tried a few scripts that I found on the net but none of them seem to work as I believe HP updated there site this year..

OK, I played around a bit (scripting from a web page isn't way beyond me) but... a few caveats. My lab isn't available right now; so all I could test was that the script ran on an HP laptop. A single HP laptop. and created the regkeys in
(in my case) HKLM\software\wow6432node\CompanyName\WarrantyInformation. So... one single test on one single workstation, and no testing of the mof edit means... I'll need your help to confirm it works.
Anyway, below is the script. Other caveats: It drops a log, and then continuously adds to the log file in %temp% (of the SYSTEM, which is using %windir%\temp). So depending upon what you want/need--you may want to change the EnableLogging
= True to EnableLogging = False (once you confirm it works on all/most of your boxes). The other caveat, of course, is to change the sCompanyname = to be your Company Name; although I suggest you don't have spaces or special characters in it. Short
'n' sweet. Then, naturally, once you have a box with the regkeys, use Mark Cochrane's RegKeytoMof 3.0 or higher to build the mof edits for you to paste to the bottom of your configuration.mof and sms_def.mof. In that blog above Eric Schloss was
using DCM as the delivery method to deliver the script to populate the regkeys--that worked for him and I see no reason it wouldn't work for everyone--so once you've tested the script interactively from a psexec -s -i cmd.exe shell on an hp box (to see it
create the regkeys) I'd make a DCM like Eric did and target a collection with a few HP laptops or desktops and confirm it works via the DCM.
Anyway, give this a try--again... only tested on 1 single, lonely little HP laptop. Needs a bigger test base!
Edit: and... even using Regkeytomof sometimes regkeys can be tricky. If the mof edit doesn't work right to pull the data back, post what you've added. someone here can usually spot if there's something not right about it and help you fix
the mof edit.
Edit #2: removed bad space, and bad copy/paste job as discovered by sevengs. Thanks!
on error resume next
EnableLogging = True
sCompanyName = "CompanyName"
Set oShell = CreateObject("wscript.Shell")
Set fso = CreateObject("scripting.filesystemobject")
strTemp = oshell.ExpandEnvironmentStrings("%temp%")
If EnableLogging Then
Set oLogFile = fso.OpenTextFile(strTemp & "\WarrantyInfo.log", 8, True)
oLogFile.WriteLine "*********************************************************"
End If
WriteLog "Beginning warranty information lookup."
sWebServiceHost = "http://h20000.www2.hp.com/bizsupport/TechSupport"
sWebServiceURL = "WarrantyResults.jsp"
sWebService = sWebServiceHost & "/" & sWebServiceURL
'Get the system's serial number from WMI
Set oWMIService = GetObject("winmgmts:\\.\root\cimv2")
Set colItems = oWMIService.ExecQuery("Select SerialNumber from Win32_BIOS",,48)
For Each objItem in colItems
sSerialNumber = objItem.SerialNumber
Next
WriteLog "Serial number of system is " & sSerialNumber
'Get the Product ID from WMI
Const wbemFlagReturnImmediately = 16
Const wbemFlagForwardOnly = 32
lFlags = wbemFlagReturnImmediately + wbemFlagForwardOnly
strService = "winmgmts:{impersonationlevel=impersonate}//./root/HP/InstrumentedBIOS"
strQuery = "select * from HP_BIOSSetting"
Set objWMIService = GetObject(strService)
Set colItems = objWMIService.ExecQuery(strQuery,,lFlags)
sProductNumber = ""
For Each objItem In colItems
If objItem.Name = "SKU Number" Then
sProductNumber = objItem.Value
End If
If objItem.Name = "Product Number" Then
sProductNumber = objItem.Value
End If
Next
If Len(sProductNumber) = 0 Then
WriteLog "ERROR: Product Number could not be determined."
oLogFile.WriteLine "*********************************************************"
oLogFile.Close
WScript.Quit(9)
Else
WriteLog "Product number of the system is " & sProductNumber
End If
Set colItems = oWMIService.ExecQuery("Select AddressWidth from Win32_Processor",,48)
For Each objItem in colItems
sAddressWidth = objItem.AddressWidth
Next
WriteLog "Operating system is " & sAddressWidth & " bit."
'Define the parameters string to send to the web site
sParameters = "nickname=&sn=" & sSerialNumber & "&country=US&lang=en&cc=us&pn=" & sProductNumber & "&find=Display+Warranty+Information+%C2%BB&"
WriteLog "Opening the web site URL " & sWebService & "?" & sParameters
'Define and call the web site
Set oHTTP = CreateObject("Microsoft.xmlhttp")
oHTTP.open "GET", sWebService & "?" & sParameters, False
'oHTTP.setRequestHeader "Content-Type", "application/x-www-form-urlencoded"
oHTTP.send
If oHTTP.Status = 200 Then
WriteLog "Successful response from the web site."
'WriteLog oHTTP.ResponseText
Process oHTTP.ResponseText
Else
WriteLog "ERROR: the web site returned status code " & oHTTP.Status
WriteLog "Returning exit code 1."
nExitCode = 1
End If
If EnableLogging Then
oLogFile.WriteLine "*********************************************************"
oLogFile.Close
End If
WScript.Quit (nExitCode)
Function Process (HTML)
WriteLog "Processing the HTML returned from the site."
intSummaryPos = InStr(LCase(html), "serial number")
If intSummaryPos = 0 Then
Process = ""
Exit Function
End If
intSummaryTable1Start = InStrRev(LCase(html), "<table", intSummaryPos)
intSummaryTable1End = InStr(intSummaryPos, LCase(html), "</table>") + 8
intSummaryTable2Start = InStr(intSummaryTable1End, LCase(html), "<table")
intSummaryTable2End = InStr(intSummaryTable2Start, LCase(html), "</table>")
table1 = getStr(intSummaryTable1Start, intSummaryTable1End, html)
table2 = getStr(intSummaryTable2Start, intSummaryTable2End, html)
const HKLM = &H80000002
Set oReg=GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\default:StdRegProv")
sKeyPath = "SOFTWARE\" & sCompanyName & "\WarrantyInformation"
WriteLog "Registry key path is HKLM\" & sKeyPath
oReg.CreateKey HKLM,sKeyPath
WriteLog "Processing the first table from the web page."
arrGeneral = processTables(table1,1)
'arrGeneal should be in the form Serial Number, Product Number, Product Line, Product Description, Warranty Check Date
WriteLog "Processing the second table from the web page."
arrContracts = processTables(table2,2)
'arrContracts should be in the format Warranty Type, HW Warrenty Start Date, HW Warranty End Date, HW Warranty Status, Setup Warranty Start Date, Setup Warranty End Date, Setup Warranty Status
WriteLog "Setting registry values."
WriteLog "SerialNumber is " & arrGeneral(0)
oReg.SetStringValue HKLM, sKeyPath, "SerialNumber", arrGeneral(0)
WriteLog "ProductNumber is " & arrGeneral(1)
oReg.SetStringValue HKLM, sKeyPath, "ProductNumber", arrGeneral(1)
WriteLog "SerialLine is " & arrGeneral(2)
oReg.SetStringValue HKLM, sKeyPath, "ProductLine", arrGeneral(2)
WriteLog "SerialDescription is " & arrGeneral(3)
oReg.SetStringValue HKLM, sKeyPath, "ProductDescription", arrGeneral(3)
WriteLog "WarrantyCheckDate is " & CStr(CDate(arrGeneral(4)))
oReg.SetStringValue HKLM, sKeyPath, "WarrantyCheckDate", CStr(CDate(arrGeneral(4)))
WriteLog "WarrantyType is " & arrContracts(0)
oReg.SetStringValue HKLM, sKeyPath, "WarrantyType", arrContracts(0)
WriteLog arrContracts(1)
WriteLog "HardwareWarrantyStartDate is " & CStr(CDate(arrContracts(1)))
oReg.SetStringValue HKLM, sKeyPath, "HardwareWarrantyStartDate", CStr(CDate(arrContracts(1)))
WriteLog "HardwareWarrantyEndDate is " & CStr(CDate(arrContracts(2)))
oReg.SetStringValue HKLM, sKeyPath, "HardwareWarrantyEndDate", CStr(CDate(arrContracts(2)))
End Function
Function getStr(startpos, endpos, data)
Dim tmp
'Get the substring
tmp = Mid(data, startpos, endpos - startpos)
' Remove end of line
tmp = Replace(Replace(Replace(tmp, VbCrLf, ""), vbCr, ""), vbLf, "")
getStr = tmp
End Function
Function processTables(table, ttype)
' Remove HTML Tags and replace with "|"
Set re = New RegExp
re.Pattern = "<[^>]+>"
re.IgnoreCase = True
re.Global = True
table = re.Replace(table, "|")
table = Replace(table, " ", "")
table = Replace(table, ":", "")
table = Replace(table, " ", "")
' Remove excess |
re.Pattern = "[|]+"
table = re.Replace(table, "|")
' Clean up a bit more
re.Pattern = "\|\s+\|"
table = re.Replace(table, "|")
' Remove | from start and end of string
re.Pattern = "^\||\|$"
table = re.Replace(table, "")
arrTable = Split(table, "|")
arrTmp = ""
If ttype = 1 Then ' General Info Table
i = 1
For Each cell in arrTable
Select Case LCase(Trim(cell))
Case "serial number"
sSerialNumber = arrTable(i)
Case "product number"
sProductNumber = arrTable(i)
Case "product line"
sProductLine = arrTable(i)
Case "product description"
sProductDescription = arrTable(i)
Case "date of warranty check"
sCheckDate = arrTable(i)
End Select
i = i + 1
Next
arrTmp = sSerialNumber & "|" & sProductNumber & "|" & sProductLine & "|" & sProductDescription & "|" & sCheckDate
ElseIf ttype = 2 Then ' Contract Info
i = 0
For Each cell in arrTable
cell = Replace(cell," ","")
if Instr(lcase(trim(cell)),"wty hp hw maintenance onsite support") > 0 then
cell = "wty hp hw maintenance onsite support"
end if
if Instr(lcase(trim(cell)),"wty hp hw maintenance offsite support") > 0 then
cell = "wty hp hw maintenance offsite support"
end if
if Instr(lcase(trim(cell)),"wty hp support for initial setup") > 0 then
cell = "wty hp support for initial setup"
end if
Select Case LCase(Trim(cell))
Case "warranty type"
sWarrantyType = arrTable(i+8)
Case "wty hp hw maintenance onsite support"
sHWStartDate = arrTable(i+1)
sHWEndDate = arrTable(i+2)
sHWStatus = arrTable(i+3)
Case "wty hp hw maintenance offsite support"
sHWStartDate = arrTable(i+1)
sHWEndDate = arrTable(i+2)
sHWStatus = arrTable(i+3)
Case "wty hp support for initial setup"
sISStartDate = arrTable(i+1)
sISEndDate = arrTable(i+2)
sISStatus = arrTable(i+3)
case else
End Select
i = i + 1
Next
arrTmp = sWarrantyType & "|" & sHWStartDate & "|" & sHWEndDate & "|" & sHWStatus & "|" & sISStartDate & "|" & sISEndDate & "|" & sISStatus
End If
' Remove | from start and end of string
re.Pattern = "^\||\|$"
arrTmp = re.Replace(arrTmp, "")
'wscript.echo arrTmp
arrResult = Split(arrTmp, "|")
Set re = Nothing
processTables = arrResult
End Function
Function WriteLog (sText)
If EnableLogging Then
oLogfile.WriteLine Now() & " " & sText
End If
End Function
Standardize. Simplify. Automate.

How to associate hardware information into an Oracle Table?

Hi,
I am new on Windows 2000 .
I am using the following script in order to get the windows 2000
hardware information.
I am using 8.1.7 version of ORACLE.
I am using a table "Server Hardware"(Server list,Network Adapter,RAM).
I would like to ask that how should or where should I use this script
in order to associate its information into my table "Server Hardware".
Could someone give me hints that how to use this script?
Thanks
Lee
Following script returns the name and version number of the operating
system installed on a computer
Script Code
strComputer = "."
Set objWMIService = GetObject("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" & strComputer &
"\root\cimv2")
Set colOperatingSystems = objWMIService.ExecQuery _
("Select * from Win32_OperatingSystem")
For Each objOperatingSystem in colOperatingSystems
Wscript.Echo objOperatingSystem.Caption & " " &
objOperatingSystem.Version
Next

Actually, I am not using Recovery Catalog, so the views like RC_database, Rc_tablespaces etc , which are specific to recovery catalog are not available.
r.- this make sense at 100% because those views belong to the recovery catalog.
So, I wanted that these information, which we can get via using the commands like above, transfer into an Oracle table
r.- If you want to access the views of the Recovery Catalog to store part of that information in tables you have to have the database registered in a Recovery Catalog.
Should we keep the Recovery Catalog in Control file? Instead of using separate Schema.
r.- I recommend you to create a catalog for your database because the space the controlfile to store information regarding RMAN is reused and you can lose important information about your backups.
Can we run Catrman.sql script as a sys in order to keep the recovery catalog in sys schema?
r.- As you know, this is not recommended at all.
Conclusion : Create a Recovery Catalog and you will be able to perform all that you want regardind what you mentioned above.
I have a thread for this:
RMAN ( CATALOG CREATION ) STEP BY STEP by Joel Pérez
Joel Pérez
http://otn.oracle.com/experts

CCMS information into the solution monitoring

Hi, All
In Soulation Manager 4.0 I created RFC connection using SMSY, in R3 System CCMS alerts (auto-reaction method) has been defined and getting alert e mails...
My Question is how to I pull the CCMS information into the solution monitoring component?
is anyone tell me step by step procedure....
Thanks

Thanks...
I tried that but it show me that screen shot...
basically earlywatch report is fine....
you can check this url please
http://www.flickr.com/photos/25222280@N03/2545315527/sizes/o/
thanks

Importing NT User information into Portal

We are using Portal in an NT environment, and we have been able to get through the necessary single sign on issues.
Now, we need to pull our NT user information into Portal's user database, including all the groupings we already have set up so that we can take advantage of Portal's exceptional security features. This is key to our ability to use the product, and to our demo in a week.
The fact is we have 5,000 users to enter, and it is prohibitive for us to do that through the standard Portal APIs. We already have the users' input once in NT, we can get a flat file with all the information we need, we just need a way to get this information
into the appropriate tables within Portal's database.
Is there a script or some more "automated" way you can suggest for us to do this?

Maybe you could try to use an intermediate LDAP export file (ldif), since Active Directory is LDAP-based and you can plug a LDAP to your Portal SSO Login Server.
I only have tried exporting and importing using .ldif files up to now.
I also have heard about techniques to use NT user account info to log on to Portal ; 'could be easier.

Whenever I try to enter my credit card information into iTunes via either my mac book or my iphone it says there is an error and says "for assistance, please contact itunes support, etc...". Can anyone help with this?

Whenever I try to enter my credit card information into iTunes via either my mac book or my iphone it says there is an error and says "for assistance, please contact itunes support, etc...". Can anyone help with this?
I haven't had any luck at all getting it resolved using iTunes support so I'm hoping someone who's encountered the problem can help me.

What did itunes suport tell you?
They will need to solve this.

Hello! I use photoshop CS3. recently, after logging information into FILE INFO, I am unable to close out that window. I am able to save & close the image I am working on, but the window remains. I then must close out of Photoshop completely and reopen to

Hello! I use Photoshop CS3 and Yosemite. Recently, after logging info information into the FILE INFO panel, I am unable to close out the window. I am able to save & close out the image, but then I have to completely close Photoshop and re-open the program to work on a new image. Frustrating! Any help to remedy this problem? Many thanks!

Try resetting the Photoshop preference file: Press and hold Cmd+Opt+Shift and start Photoshop. Select "yes" when asked if you would like to continue with reset.
Benjamin

Can I add extra information into logon ticket

hi everyone:
When I logon sap portal, the CreateTicketLogon Module will generate logon tickets.there are serveral information in the logon ticket MYSAPSSO2 cookie including SID,UserId,Login timestamp.
My question is how can I add extra information into logon tickets. for example, I want to add more user's information like email address into logon ticket and pass to the SSO system.
Thanks
Elliott

Hi,
As far as I know there is no way of adding extra attributes to the SAP logon ticket. The logon ticket allows you to have two user names in it , so maybe if you setup a reference system and store the emailaddress as the username you can use this as a workaround.
If you need to get the logon ticket form EP you can either
1. Read the cookie MYSAPSSO2 from the IPortalComponentRequest
2. Get the user from IPortalComponentRequest and call getTransientAttribute("MYSAPSSO2_STRING") (not 100% certain of the last one , will have to look it up. Of course not a public api)
Dagfinn

When I input song information into "get info" for each of my songs, some do not save when I close my Itunes. When I click on the song the correct info pops back up.Why?

When I input song information into "get info" for each of my songs, some do not save when I close my Itunes. When I click on the song the correct info pops back up.Why?

I ran into the same problem, I think that, If you tab on a song that is on your IPOD, and the song data is grayed-out, I think it means that the song is probably twice on your IPOD and that the iTunes directory can not edit THAT song data for two (or more) files @once. Check if this is the case, sinceI have the same problem,am looking for a way to have One and the same song in more playlists but only keep the song once on the IPOD.

Adding Asset Tag information into the Bios from Windows 7

Hi
I am wondering whether there is a utility that will enable me to add Asset tag information into the bios from within windows 7 . We have various models mainly T410 / T420 ' but alos some X201 / X220's
Firstly is there such a utility ?
secondly is there one for all ?
If not is anyone able to suggest how this maybe done . Manual entry at the bios level on thousands of Laptops is just not possible. The end result is for the asset information to be picked up in SCCM and tracked
Thanks
Andy
Solved!
Go to Solution.

Hi AndyG, and welcome to the Lenovo User Community!
Windows 7/Vista/XP:
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-75237
DOS:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013515
Enjoy!
I don't work for Lenovo. I'm a crazy volunteer!

Replicating ECC 6.0 BP's information into CRM5.0

Similar Messages

Maybe you are looking for