Replication entry
I am on page 282 of the of the ldap admin guide for ldap Directory Server 5.0 sp1. I am numder two, which is discussing creating and entry for the supplier bind DN. I do not understand how I to go about doing this. Some help would be much appreciated. Thanks Tyler Gish
The easiest way is to use ldapmodify
cd serverroot/shared/bin
./ldapmodify -p <port> -h <host> -D "dn=directory manager" -w password
dn: cn=Replication Manager,cn=config
changetype: add
objectclass: top
objectclass: person
cn: Replication Manager
sn: Manager
userPassword: the replication bind password
Similar Messages
-
I have got two Exchange 2007 SP1 servers in Standby Continuous Replication (SCR) mode.
The Target server (EXCH2) failed a few days ago and it has been recreated and Exchange has been reinstalled from scratch.
Entering: Get-StorageGroupCopyStatus -Identity "EXCH1\SG1" -StandbyMachine EXCH2 , as a result I get a ServiceDown replication for SG1.
Entering: Disable-StorageGroupCopy -Identity "EXCH1\SG1" -StandbyMachine EXCH2 , I just get this error message:
An unexpected error has occurred and debug information is being generated: The network path was not found.
How can I force or remove this old replication entry?
Thank you!Issue description: SCR Replication status has problem and unable to disable the storage group copy with SCR source
Error: “An unexpected error has occurred and debug information is being generated: The network path was not found“
Explanation: “ServiceDown” means that SCR target is not reachable, and that’s the reason why NTbackup cannot flush logs after a full backup, server thinks that SCR is enabled on the Storage Group (SG) and it’s trying to contact SCR target to copy the log files before purging the files
Please use ADSI Editor to disable the SCR replication:
a. Launch ADSI Editor
b. Find problematic SCR source SG, right-click it, and select “Properties”
c. In the “Attribute Editor” tab, find “MsExchStandbycopymachine”, the value should be the name of SCR target server, and remove it
d. Wait for info replication among the DCs
e. Now, check if SCR has been disabled again with your “Get-StorageGroupCopyStatus” cmdlet. The correct output should like below:
Name SummaryCopyStatus
SGName Not configured
After SCR replication is disabled, we can use the article above to re-enable it
How to Enable Standby Continuous Replication for an Existing Storage Group
If the method above doesn’t solve the issue, please do the following troubleshooting steps:
1. Please reproduce the issue and check the error/warning events in the application log on the both SCR source and target
2. Please run ExBPA for a health check on the exchange server
Thank you James.
That was the attribute I was looking for ;-) -
Replication error BP from CRM to R/3 - "Fill in all required entry Fields"
Dear Folks
I have maintained all steps mentioned in building block - C03. I have maintained separate account group approach. Made sure that number ranges are in sync in both the systems. Particularly in PIDE, mapping classification Consumer-Org 'A' to 'ZZ01' (Copy of 0001).
I changed all required entry to optional entry in my 'ZZ01' field status using OVT0.
But when i replicate using R3AS, i get an error 'Fill in all required entry Fields" - Error in receiving system (i.e R/3).
I tried manually creating customer in R/3 with the account group ZZ01. Surprisingly it does not allows me to save unless i give the reconcillation account entry, even though it is not a required field.
Please let me know for further details and Please help me to resolve this error. I am in real urgency.
Thanks
Keerthi
Chicago IL
507 401 1030Hi Karunakaran
Your reply answered my question of creating customer with no 'recon' a/c required entry. Thanks awarded 2 points.
My replication error is still hanging around. I found that It has no bearing on the 'Reconcillation A/c' required entry.
Some other field is still restricting my BP Role- Consumer:Organization to replicate. The error still showing as "required fields are not entered in R/3", even after suppressing "Reconcillation Account".
I think my reference customer master i created in R/3 using VD07 is not assigned in case of the account group Consumer:Organization.
But i don't know how to verify my doubts and get rid of this error.
Please help, in great urgency. -
Material Replication Issue_CRMRFCPAR entries
Hi,
We are having some issues for Materials replication. wondering if something to do with our CRMRFCPAR entries.
For initial load, i set up the entry as follows:
User : SRM
Obj name: *
Destination : RFCdestination of SRM
Load type: "I - Initial download"
I haven't maintained any other fields apart from above. Do we have to maintain "inqueue flag" check box and "send xml" entries.
I have gone thru sap note: 510192 and it seems these entries applicable in certain situations only..our's is just replication to one srm system only. we are on SRM 5.5 and ecc 6.0
appreicate if you have any inputs on this 2 entries.
Thanks in Advance
Krishhi,
when the SRM system downloads products from R/3 , number of validations are done.
if the validations fail , the system will not download --> the material.
I am very sure of the following problem , and i was able to resolve this issue also
1) Msg no: C_014 "mat for initial download: table not supported by function"
this message comes up , when the product category of the material being downloaded is not exisiting in the SRM system...
2) so best way to resolve the issues , is to ensure that --> all the master data for the products -->
units ,
product categories --> are in place in SRM system....
3) additionally --> you can see in the transaction -->
SMW01 --> in the errors / recievers -
>
longtext associated with each error message --> this helps you to resolve the issue ...
Edited by: khan voyalpad usman on Jun 17, 2008 6:03 PM -
Modify entries of Value mapping table fromValue mapping replication
Hi,
I have successful uploaded value mapping table from external source(SAP Table) using value mapping replication. The entries are displayed in the cache monitoring.
Now what should i do,if i have to modify the entries in the value mapping table.I tried uploading the new entries using the same GUID, Agency, Schema.... but now both the previously uploaded and the new entries are dispalyed in Cache monitoring.
But i want only the new entries to get reflected in the value mapping table. So kindly request anyone to help.
Regards,
AnupHi Anup,
To know more about the value mapping tools for the SAP Exchange Infrastructure (XI), please go thru the following link:
http://www.applicon.dk/fileadmin/filer/XI_Tools/ValueMappingTool.pdf
To get an idea as to what value mapping is, please go thru the following links:
http://help.sap.com/saphelp_nw04/helpdata/en/13/ba20dd7beb14438bc7b04b5b6ca300/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f2/dfae3d47afd652e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/content.htm
most of the links that I have provided also helps you get the step by step procedure of doing the same. And also involves the procedure to implement certain advanced features.
Regards,
abhy -
Replication : missing entry not replicated
Hello,
If I modify the value of an attribut, the change is applied on the other LDAP server so the replication is working fine.
For a reason that I do not known an entry is missing on one of my LDAP server.
How can I recreate this missing entry ?
The replication seems to not work is this case.
Or have I to do a initialisation from the LDAP where the entry is present ?Re-initialization (online or offline) will make sure that all entries are identical on both servers and will be kept in sync in the future.
Is the entry really missing or is it just that you do not see it when performing a search ?
One way to check is to export the data (with replication meta-data, and from the server which appears to have the entry missing) to LDIF. And look into the LDIF file if the entry is present or not, if it is a normal entry or a deleted entry.
If the entry is present and normal, it could be an index issue and rebuilding the index should be enough.
If the entry is present but as a deleted entry, this would require more investigation.
If the entry is not present at all, then reinitialization is the only proper way to solve this issue.
regards,
Ludovic -
Journal Entry replication quastion
I have a scenario A, in the scenario A over the inbound channel I choose identifier 30.
When I add a journal entry replicate is ok, but when I add a invoice, the journal entry of the invoice is not replicate.
Anybody can help me?
[]'sI have a scenario A, in the scenario A over the inbound channel I choose identifier 30.
When I add a journal entry replicate is ok, but when I add a invoice, the journal entry of the invoice is not replicate.
Anybody can help me?
[]'s -
Snapshot replication slow during purge of master table
I have basic snapshot/materialized view replication of a big table (around 6 million rows).
The problem that I run into is that when I run a purge of the master table at the master site (delete dml), the snapshot refresh time becomes slower. After the purge the snapshot refresh time goes back to the normal time interval.
I had thought that the snapshot does a simple select so any exclusive lock on the table should not hinder the performance.
Has anyone seen this problem before and if so what has been the workaround?
The master site and the snapshot site both are 8.1.7.4 and are both unix tru64.
I don't know if this has any relevence but the master database is rule based while the snapshot site is cost based.
thanks in advanceHello Alan,
Your problem is, to know inside a table-trigger if the actual DML was caused
by a replication or a normal local DML.
One way (I'm practising) to solve (in Oracle 8.1.7) this is the following:
You can use in the trigger code the functions DBMS_SNAPSHOT.I_AM_A_REFRESH(),
DBMS_REPUTIL.REPLICATION_IS_ON() and DBMS_REPUTIL.FROM_REMOTE()
(For details see oracle documentation library)
For example: a trigger (before insert of each row) at the master side
on a table which is an updatable snapshot:
DECLARE
site_x VARCHAR2(128) := DBMS_REPUTIL.GLOBAL_NAME;
timestamp_x DATE;
value_time_diff NUMBER;
BEGIN
IF (NOT (DBMS_SNAPSHOT.I_AM_A_REFRESH) AND DBMS_REPUTIL.REPLICATION_IS_ON) THEN
IF NOT DBMS_REPUTIL.FROM_REMOTE THEN
IF inserting THEN
:new.info_text := 'Hello table; this entry was caused by local DML';
END IF;
END IF;
END IF;
END;
By the way: I've got here at work nearly the same configuration, now in production since a year.
Kind regards
Steffen Rvckel -
Sun java System Web Server 7.0 up2 session replication setting
hi ....
Following the standard example of reverse proxy and 2 cluster nodes with session replication
I get the following starting message
info ( 3355): CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.5.0_12] from [Sun Microsystems Inc.]
[07/Aug/2008:15:26:45] warning ( 3355): REPL0081: No backup instance configured for replication service. Disabling replication service
[07/Aug/2008:15:26:47] info ( 3355): WEB0100: Loading web module in virtual server [mycluster8087] at [myweb]
[07/Aug/2008:15:26:48] warning ( 3355): WEB9200: sun-web.xml DTD Version with public ID = [-//Sun Microsystems, Inc.//DTD Application Server 8.1 Servlet 2.5//EN] and system ID = [http://www.sun.com/software/appserver/dtds/sun-web-app_2_4-1.dtd] not found in the local respository. Using DTD version with system ID = [http://www.sun.com/software/appserver/dtds/sun-web-app_2_5-0.dtd] instead.
[07/Aug/2008:15:26:48] warning ( 3355): WEB7204: Application [myweb] is configured with persistence-type [replicated] but Session Replication is not enabled on this instance; falling back to persistence-type [memory]
[07/Aug/2008:15:26:49] info ( 3355): PWC3031: Security role name tomcat used in an <auth-constraint> without being defined in a <security-role> in context [myweb]
[07/Aug/2008:15:26:49] info ( 3355): PWC3031: Security role name role1 used in an <auth-constraint> without being defined in a <security-role> in context [myweb]
[07/Aug/2008:15:26:49] info ( 3355): HTTP3072: http-listener-1: http://mycluster8087:8087 ready to accept requests
[07/Aug/2008:15:26:49] info ( 3355): CORE3274: successful server startup
[07/Aug/2008:15:27:37] info ( 3355): CORE5073: Web server shutdown in progress
********** sun-web.xml ***************
<!DOCTYPE sun-web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Application Server
8.1 Servlet 2.5//EN" "http://www.sun.com/software/appserver/dtds/sun-web-app_2_4
-1.dtd">
<sun-web-app>
<session-config>
<session-manager persistence-type="replicated"/>
</session-config>
</sun-web-app>
** path : dir-root/https-[instance-name]/web-app/[instance-name]/myweb/WEB-INF/sun-web.xml setting ...
Why is it a case a session replication doing not become?
Is it a case one a mistake by a setting?Try this blog [http://blogs.sun.com/nsegura/entry/h2_session_replication_and_lightweight|http://blogs.sun.com/nsegura/entry/h2_session_replication_and_lightweight]
4. Enabling Session Replication
Now that we deployed our web application, we need to enable the session replication feature in the configuration. This will start the session replication services in each instance. We can do this using the CLI administration:
wadm> set-session-replication-prop --config=mycluster enabled=true
CLI201 Command 'set-session-replication-prop' ran successfully
wadm> deploy-config mycluster
CLI201 Command 'deploy-config' ran successfully -
Windows Server 2012 R2 Hyper V on a SBS 2011 Domain replication failure
I have a SBS 2011 Domain which I am adding two 2012 R2 Standard servers in order to facilitate virtualization and consolidate physical servers. I have the two 2012 R2 servers up and running and a test server running virtually on Hyper-V. I want
to test replication from one Hyper-V host to the other, however, I am unable to setup Kerberos delegation in the SBS 2011 AD domain. Specifically, the Service Type of Microsoft Virtual System Migration Service is not listed. CIFS is available,
however, there are no Service Types having to do with Hyper-V available.
I have upgraded the AD using adprep from the 2012 R2 installation disc, however, this has not added the service types.
Thank you in advance for the help!Hi Justin,
Thank you for the information. I had originally reviewed the article you mentioned in your reply, however, this did not work for me. It accurately described the problem I am having, however, the solution did not work.
I did a little review of the syntax of the command SETSPN and found that the article referenced above has a "/" instead of a "\" in the command line. When I modified my syntax to reflect using the forward slash, the command seemed to processed
correctly, however, when I go back to the delegation steps, the service name is still not there. I did verify the service was registered properly by listing out all the SPN registrations.
Clarifying Question: Based on the command I ran to add this Service, I am wondering if I used the correct servers. Basically, I have the following:
Server 1 - SBS 2011 domain controller
Server 2 - 2012 R2 Hyper-V Server
Server 3 - 2012 R2 Hyper-V Server
I want to setup this Kerberos delegation for CIFS and Microsoft Virtual System Migration on Server 2 and 3 and am setting this up using ADUC on Server 1. I ran the SETSPN command on Server 1 for Server 1 - was this the correct thing to do or should
I have an SPN entry for Server 2 and/or 3?
Sorry for what is probably a very basic question.
Thank you again for your help. -
Akonadi database error code: 1062 Duplicate entry for key
Since my email provider migrated their webmail platform, I keep getting an error each time kmail attempts to get emails from their imap server: could not create collection INBOX resourceid: 17
I double checked the provided imap settings have not changed and are correct : imap.laposte.net port 993 using SSL/TLS
As you can see in the pasted akonadi self-test report below, I have a few errors related to innodb, the absence of mysql tables in local/share/akonadi/db_data/ and the table performance_schema having the wrong structure. Those have been there for several months but I've been unable to fix them and I didn't care because my email was working. I suppose they are unrelated to my current issues.
Any help I can get is much welcome.
Akonadi Server Self-Test Report
===============================
Test 1: SUCCESS
Database driver found.
Details: The QtSQL driver 'QMYSQL' is required by your current Akonadi server configuration and was found on your system.
File content of '/home/the_user/.config/akonadi/akonadiserverrc':
[%General]
Driver=QMYSQL
[QMYSQL]
Name=akonadi
Host=
Options="UNIX_SOCKET=/tmp/akonadi-the_user.kKTLSR/mysql.socket"
ServerPath=/usr/bin/mysqld
StartServer=true
User=
Password=
[Debug]
Tracer=null
[QPSQL]
StartServer=true
Name=akonadi
Host=
User=
Password=
Port=5432
[SQLITE]
Name=akonadi
Test 2: SUCCESS
Akonadi is not running as root
Details: Akonadi is not running as a root/administrator user, which is the recommended setup for a secure system.
Test 3: SUCCESS
MySQL server found.
Details: You have currently configured Akonadi to use the MySQL server '/usr/bin/mysqld'.
Make sure you have the MySQL server installed, set the correct path and ensure you have the necessary read and execution rights on the server executable. The server executable is typically called 'mysqld'; its location varies depending on the distribution.
Test 4: SUCCESS
MySQL server is executable.
Details: MySQL server found: /usr/bin/mysqld Ver 10.0.14-MariaDB-log for Linux on x86_64 (MariaDB Server)
Test 5: ERROR
MySQL server log contains errors.
Details: The MySQL server error log file '<a href='/home/the_user/.local/share/akonadi/db_data/mysql.err'>/home/the_user/.local/share/akonadi/db_data/mysql.err</a>' contains errors.
File content of '/home/the_user/.local/share/akonadi/db_data/mysql.err':
141129 9:34:33 [Warning] You need to use --log-bin to make --binlog-format work.
2014-11-29 09:34:33 7f5b81d0b780 InnoDB: Warning: Using innodb_additional_mem_pool_size is DEPRECATED. This option may be removed in future releases, together with the option innodb_use_sys_malloc and with the InnoDB's internal memory allocator.
141129 9:34:33 [Note] InnoDB: Using mutexes to ref count buffer pool pages
141129 9:34:33 [Note] InnoDB: The InnoDB memory heap is disabled
141129 9:34:33 [Note] InnoDB: Mutexes and rw_locks use GCC atomic builtins
141129 9:34:33 [Note] InnoDB: Memory barrier is not used
141129 9:34:33 [Note] InnoDB: Compressed tables use zlib 1.2.8
141129 9:34:33 [Note] InnoDB: Using Linux native AIO
141129 9:34:33 [Note] InnoDB: Using CPU crc32 instructions
141129 9:34:33 [Note] InnoDB: Initializing buffer pool, size = 80.0M
141129 9:34:33 [Note] InnoDB: Completed initialization of buffer pool
141129 9:34:33 [Note] InnoDB: Highest supported file format is Barracuda.
141129 9:34:33 [Note] InnoDB: The log sequence numbers 66340678877 and 66340678877 in ibdata files do not match the log sequence number 66344113222 in the ib_logfiles!
141129 9:34:33 [Note] InnoDB: Database was not shutdown normally!
141129 9:34:33 [Note] InnoDB: Starting crash recovery.
141129 9:34:33 [Note] InnoDB: Reading tablespace information from the .ibd files...
141129 9:34:33 [Note] InnoDB: Restoring possible half-written data pages
141129 9:34:33 [Note] InnoDB: from the doublewrite buffer...
141129 9:34:34 [Note] InnoDB: 128 rollback segment(s) are active.
141129 9:34:34 [Note] InnoDB: Waiting for purge to start
141129 9:34:34 [Note] InnoDB: Percona XtraDB (http://www.percona.com) 5.6.20-68.0 started; log sequence number 66344113222
141129 9:34:34 [Note] Plugin 'FEEDBACK' is disabled.
141129 9:34:34 [ERROR] Can't open and lock privilege tables: Table 'mysql.servers' doesn't exist
141129 9:34:34 [Warning] Can't open and lock time zone table: Table 'mysql.time_zone_leap_second' doesn't exist trying to live without them
141129 9:34:34 [ERROR] Native table 'performance_schema'.'cond_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_current' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_history' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_history_long' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_host_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_instance' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_thread_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_user_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_account_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_waits_summary_global_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'file_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'file_summary_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'file_summary_by_instance' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'host_cache' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'mutex_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'objects_summary_global_by_type' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'performance_timers' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'rwlock_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_actors' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_consumers' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_instruments' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_objects' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'setup_timers' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'table_io_waits_summary_by_index_usage' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'table_io_waits_summary_by_table' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'table_lock_waits_summary_by_table' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'threads' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_current' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_history' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_history_long' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_thread_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_account_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_user_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_by_host_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_stages_summary_global_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_current' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_history' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_history_long' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_thread_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_account_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_user_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_host_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_global_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'events_statements_summary_by_digest' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'users' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'accounts' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'hosts' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'socket_instances' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'socket_summary_by_instance' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'socket_summary_by_event_name' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'session_connect_attrs' has the wrong structure
141129 9:34:34 [ERROR] Native table 'performance_schema'.'session_account_connect_attrs' has the wrong structure
141129 9:34:34 [Warning] Failed to load slave replication state from table mysql.gtid_slave_pos: 1146: Table 'mysql.gtid_slave_pos' doesn't exist
141129 9:34:34 [Note] Reading of all Master_info entries succeded
141129 9:34:34 [Note] Added new Master_info '' to hash table
141129 9:34:34 [Note] /usr/bin/mysqld: ready for connections.
Version: '10.0.14-MariaDB' socket: '/tmp/akonadi-the_user.kKTLSR/mysql.socket' port: 0 MariaDB Server
2014-11-29 09:34:34 7f5b81c77700 InnoDB: Error: Table "mysql"."innodb_table_stats" not found.
141129 15:14:56 [Warning] Aborted connection 58 to db: 'akonadi' user: 'the_user' host: '' (Unknown error)
Test 6: SUCCESS
MySQL server default configuration found.
Details: The default configuration for the MySQL server was found and is readable at <a href='/usr/share/config/akonadi/mysql-global.conf'>/usr/share/config/akonadi/mysql-global.conf</a>.
File content of '/usr/share/config/akonadi/mysql-global.conf':
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
# Based on advice by Kris Köhntopp <[email protected]>
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
# We use InnoDB, so don't let MyISAM eat up memory
key_buffer_size=16K
[client]
default-character-set=utf8
Test 7: SUCCESS
MySQL server custom configuration found.
Details: The custom configuration for the MySQL server was found and is readable at <a href='/home/the_user/.config/akonadi/mysql-local.conf'>/home/the_user/.config/akonadi/mysql-local.conf</a>
File content of '/home/the_user/.config/akonadi/mysql-local.conf':
# workaround fix for akonadi db error after server upgrade
# http://forum.kde.org/viewtopic.php?f=215&t=101004
[mysqld]
binlog_format=row
Test 8: SUCCESS
MySQL server configuration is usable.
Details: The MySQL server configuration was found at <a href='/home/the_user/.local/share/akonadi/mysql.conf'>/home/the_user/.local/share/akonadi/mysql.conf</a> and is readable.
File content of '/home/the_user/.local/share/akonadi/mysql.conf':
# Global Akonadi MySQL server settings,
# These settings can be adjusted using $HOME/.config/akonadi/mysql-local.conf
# Based on advice by Kris Köhntopp <[email protected]>
[mysqld]
# strict query parsing/interpretation
# TODO: make Akonadi work with those settings enabled
# sql_mode=strict_trans_tables,strict_all_tables,strict_error_for_division_by_zero,no_auto_create_user,no_auto_value_on_zero,no_engine_substitution,no_zero_date,no_zero_in_date,only_full_group_by,pipes_as_concat
# sql_mode=strict_trans_tables
# DEBUGGING:
# log all queries, useful for debugging but generates an enormous amount of data
# log=mysql.full
# log queries slower than n seconds, log file name relative to datadir (for debugging only)
# log_slow_queries=mysql.slow
# long_query_time=1
# log queries not using indices, debug only, disable for production use
# log_queries_not_using_indexes=1
# mesure database size and adjust innodb_buffer_pool_size
# SELECT sum(data_length) as bla, sum(index_length) as blub FROM information_schema.tables WHERE table_schema not in ("mysql", "information_schema");
# NOTES:
# Keep Innob_log_waits and keep Innodb_buffer_pool_wait_free small (see show global status like "inno%", show global variables)
#expire_logs_days=3
#sync_bin_log=0
# Use UTF-8 encoding for tables
character_set_server=utf8
collation_server=utf8_general_ci
# use InnoDB for transactions and better crash recovery
default_storage_engine=innodb
# memory pool InnoDB uses to store data dictionary information and other internal data structures (default:1M)
# Deprecated in MySQL >= 5.6.3
innodb_additional_mem_pool_size=1M
# memory buffer InnoDB uses to cache data and indexes of its tables (default:128M)
# Larger values means less I/O
innodb_buffer_pool_size=80M
# Create a .ibd file for each table (default:0)
innodb_file_per_table=1
# Write out the log buffer to the log file at each commit (default:1)
innodb_flush_log_at_trx_commit=2
# Buffer size used to write to the log files on disk (default:1M for builtin, 8M for plugin)
# larger values means less I/O
innodb_log_buffer_size=1M
# Size of each log file in a log group (default:5M) larger means less I/O but more time for recovery.
innodb_log_file_size=64M
# # error log file name, relative to datadir (default:hostname.err)
log_error=mysql.err
# print warnings and connection errors (default:1)
log_warnings=2
# Convert table named to lowercase
lower_case_table_names=1
# Maximum size of one packet or any generated/intermediate string. (default:1M)
max_allowed_packet=32M
# Maximum simultaneous connections allowed (default:100)
max_connections=256
# The two options below make no sense with prepared statements and/or transactions
# (make sense when having the same query multiple times)
# Memory allocated for caching query results (default:0 (disabled))
query_cache_size=0
# Do not cache results (default:1)
query_cache_type=0
# Do not use the privileges mechanisms
skip_grant_tables
# Do not listen for TCP/IP connections at all
skip_networking
# The number of open tables for all threads. (default:64)
table_open_cache=200
# How many threads the server should cache for reuse (default:0)
thread_cache_size=3
# wait 365d before dropping the DB connection (default:8h)
wait_timeout=31536000
# We use InnoDB, so don't let MyISAM eat up memory
key_buffer_size=16K
[client]
default-character-set=utf8
# workaround fix for akonadi db error after server upgrade
# http://forum.kde.org/viewtopic.php?f=215&t=101004
[mysqld]
binlog_format=row
Test 9: SUCCESS
akonadictl found and usable
Details: The program '/usr/bin/akonadictl' to control the Akonadi server was found and could be executed successfully.
Result:
Akonadi 1.13.0
Test 10: SUCCESS
Akonadi control process registered at D-Bus.
Details: The Akonadi control process is registered at D-Bus which typically indicates it is operational.
Test 11: SUCCESS
Akonadi server process registered at D-Bus.
Details: The Akonadi server process is registered at D-Bus which typically indicates it is operational.
Test 12: SKIP
Protocol version check not possible.
Details: Without a connection to the server it is not possible to check if the protocol version meets the requirements.
Test 13: SUCCESS
Resource agents found.
Details: At least one resource agent has been found.
Directory listing of '/usr/share/akonadi/agents':
akonadibalooindexingagent.desktop
akonadinepomukfeederagent.desktop
akonotesresource.desktop
archivemailagent.desktop
birthdaysresource.desktop
contactsresource.desktop
davgroupwareresource.desktop
facebookresource.desktop
followupreminder.desktop
googlecalendarresource.desktop
googlecontactsresource.desktop
icaldirresource.desktop
icalresource.desktop
imapresource.desktop
invitationsagent.desktop
kabcresource.desktop
kalarmdirresource.desktop
kalarmresource.desktop
kcalresource.desktop
kdeaccountsresource.desktop
knutresource.desktop
kolabproxyresource.desktop
kolabresource.desktop
localbookmarksresource.desktop
maildirresource.desktop
maildispatcheragent.desktop
mailfilteragent.desktop
mboxresource.desktop
migrationagent.desktop
mixedmaildirresource.desktop
mtdummyresource.desktop
newmailnotifieragent.desktop
nntpresource.desktop
notesresource.desktop
openxchangeresource.desktop
pop3resource.desktop
sendlateragent.desktop
vcarddirresource.desktop
vcardresource.desktop
Environment variable XDG_DATA_DIRS is set to '/usr/share:/usr/share:/usr/local/share'
Test 14: ERROR
Current Akonadi server error log found.
Details: The Akonadi server reported errors during its current startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadiserver.error'>/home/the_user/.local/share/akonadi/akonadiserver.error</a>.
File content of '/home/the_user/.local/share/akonadi/akonadiserver.error':
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
Test 15: ERROR
Previous Akonadi server error log found.
Details: The Akonadi server reported errors during its previous startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadiserver.error.old'>/home/the_user/.local/share/akonadi/akonadiserver.error.old</a>.
File content of '/home/the_user/.local/share/akonadi/akonadiserver.error.old':
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
DATABASE ERROR:
Error code: 1062
DB error: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex'"
Error text: "Duplicate entry '93-INBOX' for key 'CollectionTable_parentAndNameIndex' QMYSQL3: Unable to execute statement"
Query: "INSERT INTO CollectionTable (remoteId, remoteRevision, name, parentId, resourceId, enabled, syncPref, displayPref, indexPref, cachePolicyInherit, isVirtual) VALUES (:0, :1, :2, :3, :4, :5, :6, :7, :8, :9, :10)"
Control process died, committing suicide!
Test 16: ERROR
Current Akonadi control error log found.
Details: The Akonadi control process reported errors during its current startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadi_control.error'>/home/the_user/.local/share/akonadi/akonadi_control.error</a>.
File content of '/home/the_user/.local/share/akonadi/akonadi_control.error':
Executable "akonadi_nepomuk_feeder" for agent "akonadi_nepomuk_feeder" could not be found!
Test 17: ERROR
Previous Akonadi control error log found.
Details: The Akonadi control process reported errors during its previous startup. The log can be found in <a href='/home/the_user/.local/share/akonadi/akonadi_control.error.old'>/home/the_user/.local/share/akonadi/akonadi_control.error.old</a>.
File content of '/home/the_user/.local/share/akonadi/akonadi_control.error.old':
Executable "akonadi_nepomuk_feeder" for agent "akonadi_nepomuk_feeder" could not be found!After Upload you can delete the Duplicates comparing the employee Id.
It Will be Possible only when you use OLE and read the file records line by Line. I am not sure of the error Handling with OLE control. It may lead to some performance issues.. -
In-memory replication of http session is not working in BEA7 cluster
Hi everyone,
I have 3 managed servers in Bea7.0 SP4 in a cluster. The client requests are sent
through apache web server. I have given cluster address as URL in httpd.conf of
apache server which sends the client requests for dynamic pages such as JSPs and
servlets to the weblogic cluster.
Load balancing is working fine. I ensured this from the log files of all the 3
servers. All the 3 servers are getting different client requests and thus load
balancing is working.
Now, I wanted to achieve Fail-over. I do not think that i should use proxy plug-in
for this. I feel the cluster itself will handle fail-over provided i make the
http session as memory replicated.
I updated the weblogic.xml with the following entry :
<session-descriptor>
<param-name>PersistentStoreType</param-name>
<param-value>replicated</param-value>
</session-param>
</session-descriptor>
I guess this is sufficient to make the http session as cluster aware.
But when I shutdown server1, the user connected to server1 will be kicked out
of the session and come to login page through server2 or server3 which are running
fine.
Could anyone help me to achieve http session as cluster aware. Does it indicate
that I have to go for WLS proxy – HttpClusterServlet to achieve fail over for
http session ?
BTW, for your info, i am using setAttribute() and getAttribute() while manipulating
the session.
thanks in advance.
Hi Ryan,
Thanks for ur valuable input.
I can see failover working.
But, I can not continue with the same session in my application.
I printed session Ids before and after failover, I found both are different.
I guess session replication is a responsibility of weblogic/apache plugin.
If not please let me know which all settings I should do to make failover working?
Thanks again.
Plad
"ryan upton" <ryanjupton at learningvoyage dot com> wrote:
>Plad,
>
>Are you trying to gracefully shut down the server? If you are then the
>problem that you say you can't identify is simply the server's default
>behavior which is to wait for all non-replicated sessions to be dropped
>or
>timed out before killing the process. Try forcing the shutdown: kill
>-9 the
>PID or CTRL-C if you started the server from the command line. You can
>also
>check the ``Ignore Sessions During Shutdown" checkbox under the server's
>control tab in the admin console, this should allow you to shut down
>gracefully without waiting for session timeout. BTW your sequence is
>off
>in #5 below, the replication doesn't occur upon failure, the replication
>has
>already happened once you created the session object on the first server,
>I
>think maybe you're confusing replication with failover.
>
>~RU
>
>"Plad" <[email protected]> wrote in message
>news:[email protected]...
>>
>> Hi,
>> I have 2 managed servers in a cluster.
>>
>> 1. I have got a DNS name configured which maps to these 2 managed server's
>IP
>> addresses.
>> 2. I can browse my site using this DNS name.
>> In HTTPD.conf I have :
>>
>> ServerName dev.a.b.net
>>
>> <IfModule mod_weblogic.c>
>> WebLogicCluster 10.1.38.232:7023,10.1.34.51:7023
>> MatchExpression *.*
>> </IfModule>
>>
>> LoadModule weblogic_module modules/mod_wl_20.so
>>
>> 3. I have adeded session descriptor in weblogic.xml , also enabled
>proxy
>plugin
>> in weblogic console.
>>
>> 4. I tested accessing my application using DNS url after shutting down
>alternatively
>> each manaed server. I can access application.
>>
>> 5. Now, problem comes when I access a managed server1 , keeping server2
>down.
>> I am able to access my application.
>> Now, I start the server2.
>> (Here I am supposing that replication should occur)
>> Then I am shutting down server1.
>> But, this time the server log shows me following:
>>
>>
>> 9:58:51 AM GMT+05:30 NOTICE Web application(s) chlist still have
>non-replicated
>> sessions after 2 minutes of initiating SUSPEND. Waiting for non-replicated
>sessions
>> to finish.
>> 10:00:51 AM GMT+05:30 NOTICE Web application(s) chlist still have
>non-replicated
>> sessions after 4 minutes of initiating SUSPEND. Waiting for non-replicated
>sessions
>> to finish.
>>
>> I am unable to make out where the problem is?
>> Can it be a problem of Liecense? Is there any specialcluster liecense
>for
>weblogic8?
>>
>> Hoping to get replies.
>> Thanx.
>> Plad
>>
>> "ryan upton" <ryanjupton at learningvoyage dot com> wrote:
>> >See my reply to your first post, but I've also added a few comments
>here.
>> >
>> >"jyothi" <[email protected]> wrote in message
>> >news:[email protected]...
>> >>
>> >> I guess someone from bea support team only can answer both your
>question
>> >and mine.
>> >> As per my knowledge, we do not need to do any setup at Apache
>side
>> >regarding
>> >> cluster other than mentioning cluster address as URL while
>contacting
>> >WLS
>> >> from apache.
>> >>
>> >> I hope someone from Bea, will help us. I do not think that we
>> >go for
>> >WLS
>> >> proxy plug-in using HttpClusterServlet for making session replication.
>> > I
>> >strongly
>> >> feel that the cluster itself be able to manage the fail-over of
>> >http
>> >sessions
>> >> provided we put the entry "PersistentStoreType" in weblogic.xml
>> >regarding
>> >> the session replication.
>> >>
>> >
>> >The cluster does handle the management of Sessions. The clustered
>> >applications still create the Session objects and the cluster manages
>> >them
>> >as per your deployment descriptor settings (replicated, JDBC, File)
>however
>> >the proxy has to be aware of which server the client has an affinity
>> >for
>> >(only with replicated sessions) and it does that by reading a cookie
>> >passed
>> >back from the server that handled the initial request and created
>the
>> >primary session object. The proxy has a list of both the primary
>and
>> >secondary server locations from this cookie that it can use to failover
>> >the
>> >request if the primary server fails. Clusters _DO NOT_ failover nor
>> >do they
>> >load balance, that's the job of your proxy, whether you're using the
>> >HTTPClusterServlet, WLS Plug-in or a more sophisticated hardware load
>> >balancer like Big IPs F5
>> >
>> >> jyothi
>> >>
>> >
>> >~RU
>> >
>> >
>>
>
>
-
Session migration and replication
Hi All,
I am having a hard time in configuring my application for HTTP session migration. Our weblogic server consists of two managed servers running in same cluster. Each server has an Ehcache that stores some information of user with key as session ID and value as info object. In case, if a server needs restart, we would want to take this updated info Object from cache residing on server being restarted to another managed server within the same cluster.
I browsed through many documentations online. Most of them explained about session replication but not migration. so I followed replication (I don't want a real time sync up of HTTP session. I want it to migrate if something goes wrong with one of the managed server).
However, I could not achieve this task after following the steps to configure this feature. I would appreciate a lot if someone can help me figuring out the issue here.
Here is what I did.
1) Weblogic.xml
<session-descriptor>
<persistent-store-type>replicated_if_clustered</persistent-store-type>
</session-descriptor>
2) An implementation class of HttpSessionActivationListener, HttpSessionListener, HttSessionAttributeListener:
public void sessionDidActivate(HttpSessionEvent sessionEvent) {
// NEVER GETS CALLED
over here i would check if session has any attribute with name 'CACHE_ELEMENT'. If yes, then it is a migration case for current managed server
Log.info(UserCacheMigrationListener.class, "inside sessionDidActivate");//
public void sessionWillPassivate(HttpSessionEvent sessionEvent) {
// NEVER GETS CALLED
Over here I would set attribute 'CACHE_ELEMENT' so that it is available for target managed server when it's sessionDidActivate is called
Log.info(UserCacheMigrationListener.class, "inside sessionWillPassivate");
public void sessionCreated(HttpSessionEvent sessionEvent) {
THIS GETS CALLED! and I set the following attribute
sessionEvent.getHttpSession().setAttribute(UserCacheMigrationListener.class.getName(), this);
public void sessionDestroyed(HttpSessionEvent arg0) {
THIS GETS CALLED!
public void valueBound(HttpSessionBindingEvent arg0) {
THIS GETS CALLED! WHICH MEANS THAT I WAS ABLE TO setAttribute this class's instance in sessionCreatedMethod
In the above code, the setAttribute method used inside the sessionCreated(..) method successfully sets the attribute to this session. This is apparent because valueBound(..) method is called when session is created. But why does it not call the sessionWillActivate method???
3.) An entry in web.xml for this listener.
<listener>
<listener-class>com.xyz.UserCacheMigrationListener</listener-class>
</listener>
4) from weblogic config.xml. I am copying all meaning stuffs from config.xml to describe as much as I can.
<server>
<name>AdminServer</name>
<ssl>
<enabled>false</enabled>
</ssl>
<listen-address>localhost</listen-address>
<network-access-point>
<name>AdminChannel</name>
<protocol>t3</protocol>
<listen-address>localhost</listen-address>
<http-enabled-for-this-protocol>true</http-enabled-for-this-protocol>
<tunneling-enabled>false</tunneling-enabled>
<outbound-enabled>false</outbound-enabled>
<enabled>true</enabled>
<two-way-ssl-enabled>false</two-way-ssl-enabled>
<client-certificate-enforced>false</client-certificate-enforced>
</network-access-point>
<data-source>
<rmi-jdbc-security xsi:nil="true"></rmi-jdbc-security>
</data-source>
</server>
<server>
<name>Node1</name>
<ssl>
<enabled>false</enabled>
</ssl>
<machine>DevMachine</machine>
<listen-port>7002</listen-port>
<cluster>DevCluster</cluster>
<replication-group>devGroup1</replication-group>
<preferred-secondary-group>devGroup2</preferred-secondary-group>
<web-server>
<keep-alive-secs>500</keep-alive-secs>
<post-timeout-secs>120</post-timeout-secs>
</web-server>
<listen-address>localhost</listen-address>
<jta-migratable-target>
<user-preferred-server>Node1</user-preferred-server>
<cluster>DevCluster</cluster>
</jta-migratable-target>
<data-source>
<rmi-jdbc-security xsi:nil="true"></rmi-jdbc-security>
</data-source>
</server>
<server>
<name>Node2</name>
<ssl>
<enabled>false</enabled>
</ssl>
<machine>DevMachine</machine>
<listen-port>7003</listen-port>
<cluster>DevCluster</cluster>
<replication-group>devGroup2</replication-group>
<preferred-secondary-group>devGroup1</preferred-secondary-group>
<listen-address>localhost</listen-address>
<network-access-point>
<name>Node2Channel</name>
<protocol>t3</protocol>
<listen-address>localhost</listen-address>
<http-enabled-for-this-protocol>true</http-enabled-for-this-protocol>
<tunneling-enabled>true</tunneling-enabled>
<outbound-enabled>false</outbound-enabled>
<enabled>true</enabled>
<two-way-ssl-enabled>false</two-way-ssl-enabled>
<client-certificate-enforced>false</client-certificate-enforced>
</network-access-point>
<jta-migratable-target>
<user-preferred-server>Node2</user-preferred-server>
<cluster>DevCluster</cluster>
</jta-migratable-target>
<data-source>
<rmi-jdbc-security xsi:nil="true"></rmi-jdbc-security>
</data-source>
</server>
<cluster>
<name>DevCluster</name>
<cluster-messaging-mode>unicast</cluster-messaging-mode>
</cluster>
<machine>
<name>DevMachine</name>
<node-manager>
<nm-type>Plain</nm-type>
</node-manager>
</machine>
<migratable-target>
<name>Node1 (migratable)</name>
<notes>This is a system generated default migratable target for a server. Do not delete manually.</notes>
<user-preferred-server>Node1</user-preferred-server>
<cluster>DevCluster</cluster>
</migratable-target>
<migratable-target>
<name>Node2 (migratable)</name>
<notes>This is a system generated default migratable target for a server. Do not delete manually.</notes>
<user-preferred-server>Node2</user-preferred-server>
<cluster>DevCluster</cluster>
</migratable-target>
------------------------------------------------------------------------------------------------------------------Hi,
So you want to migrate your server to server.
Here are the following links which help you.
http://docs.oracle.com/cd/E15051_01/wls/docs103/cluster/migration.html
http://www.oracle.com/technetwork/middleware/weblogic/messaging/wlasm-1853193.pdf
let me know the status if you need any further help on this issue.
Regards,
Kal -
Timesten replication with multiple interfaces sharing the same hostname
Hi,
we have in our environment two Sun T2000 nodes, running SunOS 5.10 and hosting a TT server currently in Release 7.0.5.9.0, replicated between each other.
I would like to have some more information on the behavior of the replication w.r.t. network reliability when using two interfaces associated to the same hostname, the one used to define the replication element.
To make an example we have our nodes sharing this common /etc/hosts elements:
151.98.227.5 TBMAS10df2 TBMAS10df2-10 TBMAS10df2-ttrep
151.98.226.5 TBMAS10df2 TBMAS10df2-01 TBMAS10df2-ttrep
151.98.227.4 TBMAS9df1 TBMAS9df1-10 TBMAS9df1-ttrep
151.98.226.4 TBMAS9df1 TBMAS9df1-01 TBMAS9df1-ttrep
with the following element defined for replication:
ALTER REPLICATION REPLSCHEME
ADD ELEMENT HDF_GNP_CDPN_1 TABLE HDF_GNP_CDPN
CHECK CONFLICTS BY ROW TIMESTAMP
COLUMN ConflictResTimeStamp
REPORT TO '/sn/sps/HDF620/datamodel/tt41dataConflict.rpt'
MASTER tt41data ON "TBMAS9df1-ttrep"
SUBSCRIBER tt41data ON "TBMAS10df2-ttrep"
RETURN RECEIPT BY REQUEST
ADD ELEMENT HDF_GNP_CDPN_2 TABLE HDF_GNP_CDPN
CHECK CONFLICTS BY ROW TIMESTAMP
COLUMN ConflictResTimeStamp
REPORT TO '/sn/sps/HDF620/datamodel/tt41dataConflict.rpt'
MASTER tt41data ON "TBMAS10df2-ttrep"
SUBSCRIBER tt41data ON "TBMAS9df1-ttrep"
RETURN RECEIPT BY REQUEST;
On this subject moving from 6.0.x to 7.0.x there has been some changes I would like to better understand.
6.0.x reported in the documentation for Unix systems:
If a host contains multiple network interfaces (with different IP addresses),
TimesTen replication tries to connect to the IP addresses in the same order as
returned by the gethostbyname call. It will try to connect using the first address;
if a connection cannot be established, it tries the remaining addresses in order
until a connection is established.
Now On Solaris I don't know how to let gethostbyname return more than one interface (the documention notes at this point:
If you have multiple network interface cards (NICs), be sure that “multi
on” is specified in the /etc/host.conf file. Otherwise, gethostbyname will not
return multiple addresses).
But I understand this could be valid for Linux based systems not for Solaris.
Now if I properly understand the above, how was the 6.0.x able to realize the first interface in the list (using the same -ttrep hostname) was down and use the other, if gethostbyname was reporting only a single entry ?
Once upgraded to 7.0.x we realized the ADD ROUTE option was added to teach TT how to use different interfaces associated to the same hostname. In our environment we did not include this clause, but still the replication was working fine regardless of which interface we were bringing down.
My both questions in the end lead to the same doubt on which is the algorithm used by TT to reach the replicated node w.r.t. entries in the /etc/hosts.
Looking at the nodes I can see that by default both routes are being used:
TBMAS10df2:/-# netstat -an|grep "151.98.227."
151.98.225.104.45312 151.98.227.4.14000 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.14005 151.98.227.4.47307 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.14005 151.98.227.4.48230 1049792 0 1049800 0 ESTABLISHED
151.98.227.5.46050 151.98.227.4.14005 1049792 0 1049800 0 ESTABLISHED
TBMAS10df2:/-# netstat -an|grep "151.98.226."
151.98.226.5.14000 151.98.226.4.47699 1049792 0 1049800 0 ESTABLISHED
151.98.226.5.14005 151.98.226.4.47308 1049792 0 1049800 0 ESTABLISHED
151.98.226.5.44949 151.98.226.4.14005 1049792 0 1049800 0 ESTABLISHED
Tried to trace with ttTraceMon but once I brought down one of the interfaces did not see any reaction on either node, if you have some info it would be really appreciated !
Cheers,
MikeHi Chris,
Thanks for the reply, I have few more queries on this.
1.Using the ROUTE CLAUSE we can use multiple IPs using priority level set, so that if highest priority level set in thr ROUTE clause for the IP is not active it will fall back to the next level priority 2 set IP. But cant we use ROUTE clause to use the multiple route IPs for replication simultaneously?
2. can we execute multiple schema for the same DSN and replication scheme but with different replication route IPs?
for example:
At present on my system, I have a replication scheme running for a specific DSN with stand alone Master-Subscriber mechanism, with a specific route IP through VLAN-xxx for replication.
Now I want to create and start another replication scheme for the same DSN and replication mechanism with a different VLAN-yyy route IP to be used for replication in parallel to the existing replication scheme. without making any changes to the pre-existing replication scheme.
for the above scenarios, will there be any specific changes respective to the different replication schema mechanism ie., Active Standby and Standalone Master Subscriber mechanism etc.,
If so what are the steps. like how we need to change the existing schema?
Thanks In advance.
Naveen -
Error while creating Configuration for SLT replication
Hi All,
I have got Hana trial version system and I am trying to do data replication using SLT.
While doing the configuration using transaction LTR, I am getting error as attached.
Though I am getting an error, entry is getting into the DBCON table but when I trying to check the connection via the report ADBC_TEST_CONNECTION, I am getting error as :-
Could not open connection TMPI07762120130424061216 .
sql error 10.709- occured:
Connection failed (RTE:[89001] Cannot resolve host name 'hanacloud' rc=8: node name or service name not known)
Note:- I am using hanacloud as hostname in hana studio and its working fine there
Can anyone can suggest, what can be the solution for it.
Thanks in advance,
GopalHi Gopal,
Could you please clarify what type of trial system youhave received? Even though you will get the same HANA software but based on the delivery and deployment (On Premise or Cloud (which is again Develop Edition or HANA One for productive cases)), some of the deployment parameters are different. SAP HANA One is SAP HANA in public cloud (currently only at AWS) with hourly pricing and community support for productive and commercial use cases.
By the way, for new SAP HANA One customers:
PROMOTION- February 18- May 30, 2013 - AWS customers who are new to SAP Hana One on the AWS Marketplace will receive $120 of AWS Promotion Credit if they use at least 10 hours of SAP Hana One between February 18 and May 30, 2013. For AWS Marketplace customers who qualify, the Promotional credit will be sent to the email address registered to their AWS Marketplace account. Restrictions apply; see offer terms at https://aws.amazon.com/marketplace/help/201119060 for more details.
Thanks,
Swapan
Maybe you are looking for
-
So here is the scenario. I just purchased a new 2T Time Capsule about a month ago. At some point, about a week ago it stopped working correctly. A few things that I've noticed: 1. The wireless router works just fine. 2. Every once in a while (mo
-
OVD - special/national characters in LDAP context
Hi all, I created integration between Active Directory and Oracle 10g via Oracle Virtual Directory 10g. All works correctly but some users have national characters in his/her AD context. For example Thomas Bjørne (cn=Thomas Bjørne,cn=Users,dc=media,d
-
Can't copy project to external HD
Hi-- I am trying to free up space on my daughter's iBook (G3). I read on support, that ideally you should be able to drag the starred movie project onto the external HD and copy it that way. I keep getting a warning that says, cannot copy "icon, beca
-
I have a number of questions on an h.323 gateway configuration. 1. I have a 3660 connected to a PBX via T1 CAS. I have the necessary pots peers to send digits to the PBX. If I configured CM to send a string of digits to the Gateway for an outbound ca
-
CRTL + S in Excel 2010 causes the icon in the Taskbar to move to the end.
CRTL + S in Excel 2010 causes the icon in the Taskbar to move to the end. If I just use File > Save or the Save icon in the Quick Access toolbar it doesn't cause the icon to move in the Taskbar. This is a recently change in behavior. Has anyone else