Replication of HR Bussines event groups/types to SRM
Hello,
in my HR system i have Bussiness events/group hierarchy - there are some training courses....and i need to show these courses in srm cataloge, how should i do it? do i have to write a custom program?
edit: i checked the note nb 312090 - there is written that only objects of type C, S, O, P can be transferred automatically...is it right??
thanks
JJ
Message was edited by:
Jiri Juranek
Hi iri Juranek,
In standard SRM, R/3 world, once O,C,S and P are transfered to SRM. it can be seen in the SRM org. structure. If you want to replicate other than the above ( O,C,S and P), you can still replicate it by adjusting the filter. It will be stored in SRM tables for nothing (unless you write your own code to interpret the values whatever way you wand....like catalog as you mentioned )
-Pranav
Similar Messages
-
Business Event groups and types.
Dear Experts
Following is the case where user is end up with the existing no. range for the Event groups and types.
How can i assign new no. range for the both?
Below is the current situation:
Int Ext
From To Current From To
Business event type 70002100 70009999
Course 71000000 79999999 71001849
Location 70010200 70010399 0
Resource 70010400 70010999 70010424
External person 70011000 70019999 0
Business event group 70000100 70002099
Your help will be really appreciated
Regards
JayeetaHi nalla
thank u so much for your reply
but what i want to know is that all existing number ranges are exhausted
how do i now assign new number ranges to the Business Event groups & types
please help
Regards
jayeeta -
Short Dumps in standard HR Business Event Group/Event creation transactions
Dear All,
I m getting short dumps whlile executing standard HR transactions for Creation of Business Event Groups and Business Event Types. Attaching the Short Dump text herewith. Can anyone plz. help...
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "RH_BASE_READ_INFTY_NNNN" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Eine Open SQL-Klausel wurde dynamisch angegeben. Der darin auftretende
Feldname "SUBTY" kommt in keiner der Datenbanktabellen aus der
FROM-Klausel vor.
Thanks and Regards,
Sudipto.Hi,
Check whether the OSS note 207515 is suitable for the below situation.
Summary
Symptom
A dump occurs in program SAPLRHDB: DBIF_NTAB_TABLE_NOT_FOUND
Additional key words
RH_BASE_READ_INFTY_NNNN, LRHDBU16
Cause and prerequisites
The system wants to access table HRPnnnn particularly by means of an entry in the infotype check table T777D. This access can be processed in various places, including in the profile generator. Here, a termination occurs if the 'ent' table/structure in the dictionary is no longer available. This generally affcts customer-specific infotypes. These have been created and possibly deleted again. However, the entry in table T777D is not available. You can also import the entry into another system with a transport of the table. If the HRP table/structure is then missing, a termination may also occur in this case.
Solution
You must check on an individual basis which infotype the termination refers to. If it is a customer-specific infotype, the customer is responsible for removing the cause of the termination. If the table entry is a 'remnant', the entry can simply be deleted.
If the termination refers to an SAP structure, you should consult SAP before carrying out any further activities.
Source code corrections
Header Data
Release Status: Released for Customer
Released on: 23.03.2000 23:00:00
Priority: Recommendations/additional info
Category: Customizing
Primary Component: PA-BC Basis
Releases
Release Independant
Satya -
Dear all
When i am going in S_AHR_61011889 to create a new business group i am able to create a business event group but it is not showing in PSV2 i.e. business event menu. Instead it is showing in S_AHR_61011887 - Master Data Catalog .
When i am creating a new Business event type and assigning the same to the above created Business event group then it disappears from S_AHR_61011887 - Master Data Catalog .
Ideally when a new business event group is created it should be shown in PSV2 i.e. business event menu but it is not showing.
Please help me out to solve this issue. Its urgent.
Regards
HarshVardhanDear mam
Creating a business event group is not a problem. T Code which you have given, business event group can be created but is is still being shown in Master Data Catalog and not in business event menu.
Creating a relationhip of event type & event group cvan be done but as soon as it is created it disappears from mastr data catalog.
In the past when ever i have created event group & event type it was shown in PSV2 i.e. business event menu.
Please guide me.
Regards
Harsh vardhan -
Event subscriptions and Event Group subscriptions
Hi,
I have a set of events with subscriptions to each one of them.
Assume I create a Event group with all the events as a member in it.
I also create a subscription for the event group while the individual event subscriptions are still existing.
Will the subscription for the group be executed first or the individual subscriptions are executed first ?
Regards,
Srini.Hi, a few more additional observations.
My subscription(S1) to the event group launches a process (P1) defined in a workflow item type(BEVLIS).
My subscription(S2) to the individual event launches another process (P2) defined in the same workflow item type BEVLIS.
Now when i raised an event... oracle.apps.per.api.person.update_person with event key 1820 following happens..
1. S1 executed and the P1 got completed successfully. The item key observed in staus monitor is *1820*
2. But on execution of S2 I got the following error notified
Event Error Name: WFENG_EVENT_NOTFOUND
Event Error Message: 3142: Process 'BEVLIS/1820' has no activities waiting to receive event 'oracle.apps.per.api.person.update_person'.
Event Error Stack:
Wf_Engine.Event(BEVLIS, 1820, NOTIFY_QUERY_RESULT2, oracle.apps.per.api.person.update_person)
So prior to execution of S2, a workflow item type BEVLIS with item type 1820 was already available and marked as completed.
And hence the S2 execution looks for a waiting activity in a process which is already competed and hence fails.
An immediate soln will be to create another item type and copy the process P2 to it. and use it for S2.
But is this the behavior expected in subscription processing?
~srini -
I bought a new MacBook Pro with OsX Lion as operating system. I use iPhoto a lot and when I tried copying a photo then pasting it to another event/group, the 'paste' feature doesn't work. This wasn't the case with Leopard and Snow Leopard where the 'paste' feature worked. What I did was to paste the photo first to the desktop before transferring it to the new event/group. I brought my Mac to the Apple store where I bought it and the technicians were themselves surprised that the 'paste' feature didn't work. Chalked it up to glitches in the Lion os. So how do we fix this? I just find it absurd that a feature that used to work in Snow Leopard has been disabled in Lion, and the user still has to undergo an additional step to make it work, when new technology is supposed to make things easier for users.
Also, hasn't anyone noticed that it takes longer for the computer to boot upon opening?Instead of copy and paste drag the photo to the new event. Or flag it and use the add flagged photos to selected event command
LN -
Business event group in an appraisal template catalog
HI all,
Is there any way to include the catalog of training in an appraisal template catalog? ie, a column where you can select a business event group (object L).
thanks, regardsHello Sergio,
I guess your post is in the wrong forum - this forum is about Supply Chain Event Management.
Regards
Berthold -
What is TYPE GROUP /TYPE-POOL? When to use that ?
hello friends
Can any one tell me
What is TYPE GROUP /TYPE-POOL? When to use that ?
Thanks & Best Regards
NileshType group
If you want to define global constants, you have to use a type group. The name of
the type group can only contain a maximum of five characters. In the type group,
you can define constants using the CONSTANTS statement. As types, you are
provided with the integrated ABAP types or the global types of the Dictionary.
In order to be able to use the types of a type group in a program, make the type
group known using the TYPE POOL statement. From these lines on, you can use
all constants of the type group.
The definition of a type group is a piece of ABAP code that is either maintained
via the Dictionary (SE11) or via the ABAP Editor (SE38).
Realization:
The first statement for the type group zmytp is always:
TYPE-POOL zmytp.This is followed by the definition of data types with the statement TYPES, as
described under local program data types. Furthermore, cross-program constants
can be declared using the CONSTANTS statement. All names of this data type
and constants must begin with the name of the type group and an underline:
zmytp_
In an ABAP program, type groups must be made known with the following
statements before they are used:
TYPE-POOLS zmytp.
When using this statement, all data types ansd constants, which are defined in the
zmytp type group can be used in the program. Several type groups can be used
in a program. -
Business event group in transaction PSV2
Hi
I have created a business event group under current plan version using Transaction OOEG.
But I am unable to make it displayed in transaction code PSV2.
If i create some other group under an already existing one, it is getting displayed.
But if I create in the first level, the problem occurs.
Can somebody help to resolve this....
Thanks
Raghu.Hi
Thanks for the response.
current plan version date ranges from 01.10.2010 to 31.12.9999
The date for the created Business group is 01.01.2011.
Since it was well within the plan date, I didn't changed the settings in "change settings".
Later I tried with date range from 01.01.1900 to 31.12.9999.
Now it's getting displayed !.
rgds
Raghu -
"Subject Area" in Info Business Event Group
What is the application "Training Center" in ESS? Why shoul I check/uncheck "Subject Area" check box so that a Business Event Group displays/not displays in the Training Center?
Points assured!
Thanks,
Nivedita.Hi Niveditha
The way you view the training courses in you portal can be simulated in your R/3 system using
transactions PV7I & PV8I. If you want to refine your searches with one particular course group, then
the subject area is useful. When you check this option for a course group, you will be able to search
courses under this particular course group only from the portal.
Regards
Vivek -
Zone Group Types in RPM 13.2.4
Hi All,
I have a question related to the zone group types that are available in RPM 13.2.4.
Types are:
1) Regular (Used for assigning Primary zone group as merch hier level)
2) Clearance
3) Promotional
I know that a zone group can have all 3 types and if a zone group has promotional as one of its attributes then you cannot attach a warehouse to it.
Now my question is whats the significance of these zone group types. Are they just a logical grouping of zones or there is a system level restriction that is a zone is regular or clearance then you cannot create promotion on the zone group?
Any help is much appreciated.
Thanks,
Kunal.Got the answer. Its a new enhancement in 13.2.4. Only the parent items gets pulled by new item loc batch.
-
Component group type assignment in call components in JIS
Hi All
How Component group type assignment is done in call components ?
Edited by: mayuresh bhurke on Jan 20, 2012 8:25 PMHi Mayuresh bhurke,
How the system will does the job:
The system carries out this function automatically, each time a JIT call is received. In this way it assigns each call component transmitted to a components group type. The components group type then takes on the internal control of the call components.
With sequenced JIT calls for assemblies, the system assigns several call components to the same components group type. With the other call types the call components and the components group type form a logical unit and the system therefore assigns a different components group type to each call component.
In the components group determination the system compares whether the characteristics of the call components match a components group type. As soon as it can assign a call component, it continues with the next one. In the profile for the components group determination you can define with which priority the system should consider the various characteristics. The system determines the relevant characteristics of the call components as follows:
JIT customer
The JIT customer is made up of the sold-to party and the partner description and can therefore be taken from the IDoc.
Unloading point and assembly location
The unloading point and, if necessary the assembly location, are also transmitted with the JIT call. The system can also take these characteristics of the call components from the IDoc.
Components group material
The JIT customer generally transmits the components group material with a call. You have several options for defining the components group material of the call component before the components group determination.
You can realize an individual components group material determination using a customer exit. This is particularly recommended for sequenced JIT calls for assemblies, due to the large number of variants.
If you use the process for discrete materials, you can transfer the material of the call components as a components group material.
If you use the process for discrete materials and exactly one components group material can be assigned to a call component, you can transfer the configurable material of the call component as a components group material. To do this you must have entered the configurable material in the material master of the call component in the tab page Basic data 2 in the field Cross plant conf.mat.
Production version
You can also assign the production version using a customer exit. The production version allows you to assign two otherwise equal call components to different components group types, to produce them on different production lines, for example.
There are also call types:
please follow the below link:
http://help.sap.com/saphelp_di46c2/helpdata/EN/7a/ad7d2b1e4c11d3b69c0000e82d81c3/content.htm
I hope you can find the need full information.
Regards,
Madhu.G -
Can we change the Record Group Type through Custom.pll
Hello All,
I have a small requirement on Changing the Record Group Dynamically.
Can i set the Record group type to 'Query' from 'Static'. i.e Can i change the Record group type dynamically through custom.pll. I know that we can dynamically change the Record group query.
Please help me its a bit urgent.
Thanks inadvance,
Amarnadh Jsyou can control your record group runtime without create any recordgroup at design time..
1.static group
declare
rg_name VARCHAR2 (40) := 'Global_Rgp_Menu'; --global record group name for menu use
rg_id recordgroup; --global record group id
gc_id groupcolumn; --global record group coulmn id
errcode NUMBER; --error code
grp_row PLS_INTEGER := 0; --global record group row count
begin
rg_id := FIND_GROUP (rg_name);
IF NOT ID_NULL (rg_id)
THEN
DELETE_GROUP_ROW (rg_id, all_rows);
ELSE
rg_id := CREATE_GROUP (rg_name, global_scope);
gc_id := ADD_GROUP_COLUMN (rg_id, 'menu_item', char_column, 100);
gc_id := ADD_GROUP_COLUMN (rg_id, 'p_type', char_column, 100);
gc_id := ADD_GROUP_COLUMN (rg_id, 'p_no', char_column, 100);
END IF;
grp_row := 0;
for 1 in 1..10 loop
grp_row := grp_row + 1;
ADD_GROUP_ROW (rg_id, grp_row);
SET_GROUP_CHAR_CELL (rg_name || '.menu_item', grp_row, 'menu' || to_char(i) );
/*type*/
SET_GROUP_CHAR_CELL (rg_name || '.p_type', grp_row, 'type' || to_char(i) );
/*program_no */
SET_GROUP_CHAR_CELL (rg_name || '.p_no', grp_row, 'programno' || to_char(i) );
end loop;
end;
2. query group
declare
FACT_SQL VARCHAR2(500) :=NULL;
rg_name1 VARCHAR2(40) := 'Global_Rgp_fact';
rg_id1 RecordGroup;
Error_Flag number:=0;
group_error exception;
begin
rg_id1 := Find_Group( rg_name1 ); IF NOT Id_Null(rg_id1) THEN Delete_Group( rg_id1 ); END IF;
FACT_SQL := ' SELECT * FROM MYFACTORY ' ;
rg_id1 := Create_Group_From_Query( rg_name1,FACT_SQL ,global_scope);
Error_Flag := POPULATE_GROUP(rg_id1);
IF Error_Flag <>0 THEN
error_msg:='Error while populating factory group';
raise group_error;
END IF;
exception
when group_error then
message(error_msg);
raise;
end;Edited by: nolemlin on 2010/3/23 上午 7:50 -
Hunt group type Set up with outside ext numbers ie Cell phones
Using CUCM 9.1
Is there a quick and easy way to create a hunt group type set up using outside (cell phone numbers)?
The scenario will be one (person who will be ON Call) using an internal DID that is forwarded to to a cell phone of the oncall person that particular week. If no answer it would forward to the next line group of 4 members and also try their cell phones. After this it would simply repeat the entire process. So far it looks like a solution may be possible with single line reach perhaps?
Any insight would be grealy appreciated.
DaveHello,
I set up something like this on CUCM 8.0 a couple of years ago.
I used the Mobile Connect feature as you suggest and it worked ok after some playing about with the timers.
The main problem was that there was no way for the remote users to log out of the hunt group. They could disable Mobile Connect using the IVR but the calls would still ring on their deskphones - if you log out of the phones (i.e. Extension Mobility) before leaving the office this problem should not occur.
The other issue was how long calls took to connect especially if a couple of people in the group did not answer. We actually recorded a message asking callers to be patient that was played when the call was first received (we were using UCCX to do the IVR and call transfer).
Hope this is of use. -
Please provide info on "Group type Filter" Automatic Adjustments HEADER
Hi all
i want to utilize or understand the concept of GROUP TYPE FILTER on Automatic Adjustments HEADER level . Please provide if you have any information on this field.
your help is highly appreciated
Thanks
RamanaHi,
In your Group dimension you should add a property called CONSO_TYPE. Anything entered in here will be available in the business rule header to select single/multiple Groups.
For example, in your dimension sheet;
Group ID CONSO_TYPE
1 A
2 A
3 B
and in your b rule header;
Group Filter
A
This will select Groups 1 & 2 for the business rule you are about to define.
Hope this helps,
Tom.
Maybe you are looking for
-
SENDING AN EMAIL USING BCC AND RECIPIENT NAME APPEAR IN TO FIELD
I'm sending and email to several people using the BCC field. However, when the recipients receives the email, I want the recipient's name to appear in the TO field and the recipient not know the email was sent using the BCC. Right now, the recipien
-
Compile new version on net-snmp.
Hello i would like to know if it possible to compile; install a new version to net-snmp in solaris 10. there is already one version running with svc:/application/management/sma:default how can i compile a new version and replace this one, (smf manife
-
Resulset performance!!!
I use this code to get data from database, but I want to know if the best way to do it!!!, 'cause I have tables with more of 500 records each, and my jsp is generated dinamically, and have pagging to, (I said e.g.: 1 2 3 4 last, etc) when I clik on a
-
InfoSource 80FIAR_O03 is not defined in the source system
Hello, I am facing one issue while running process chain in Test client. Isssue: 0FI_AR_4 process chain loading to ODS successfull. the next step in process chain is further update. data is goint to cube. error getting u201CInfoSource 80FIAR_O03 is n
-
Siebel 8 module enhancement for sales
Hi We are planning for upgrading to Siebel 8 crm system. We have already some reports in cognos based upon different modules in Siebel. I want to know the new features/enhancements in Siebel 8 in existing modules so that the corresponding reports can