Report addition via PFCG - erraneous

Hi All,
I have a issue.The reports added to a role thr PFCG is not visible when the role is opened in Bex.
The table AGR_HIER is not updating the unique ID of the query when added via PFCG and hence this issue.
Is there some settings that we need to be taking care of?
Let me know.We are in BI 7.0 version.
Any inputs highly appreciated.
Thanks,
Sowmya

Hi,
For queries/workbooks to be visible in Bex, they have to be 'published' to the roles via Bex analyzer.
Transaction codes/reports added to role menu in PFCG are not visible in Bex.
Thanks
Sandipan

Similar Messages

  • Sending report output via E-mail (excel pivoted format)

    Hi all,
    i have a written a report where i need to send the report output to somebody via
    E-mail.i am sending this report output via E-mail successfully.The receiver receives, my output in excel format.but this excel is not <b>pivoted</b>.
    i want , the receiver should get my output in pivoted excel format.i.e my output data should be exactly fit in the excel sheet.
    now the columns in excel sheet are overlapping.once i double clicked, the columns are getting separated.i do not want to double click.i want all the columns should come properly i.e excel field  length should be adjusted as per the output field length.
    i am giving my coding below.plz suggest how i can do the above thing .it's urgent.
    any idea will be highly appreaciated.
    Regards
    if not p_email1 is initial.
         perform fill_report_csv.
         perform f_send_internet_mail.
      endif.
    FORM fill_report_csv.
       data :   l_text(232) type c,
               v_matnr1(21) type c,
               v_matnr(21) type c,
               v_matkl(14) type c,
               v_maktx(45) type c,
               v_ttlstk(14) type c,
               v_verpr(14) type c,
               v_werks(14) type c,
               v_lgort(14) type c,
               v_char(10) type c,
               v_stks type p ,
               v_po(40) type c,
               v_qty(13) type c,
                v_qty1 type sy-datum,
               v_date(15) type c,
               v_date1(15) TYPE C,
               v_name(35) type c,
               v_eknam(18) type c,
               v_lifnr(15) type c,
            l_po(40) type c,
            v_matnr(20) type c,
             l_rate(11) type  p decimals 5,
             l_flag type c.
      concatenate c_equal c_colon 'PO no.' c_colon
                    into v_po.
      concatenate c_equal c_colon 'Material no.' c_colon
                    into v_matnr.
      concatenate c_equal c_colon 'Description.' c_colon
                    into v_maktx.
      concatenate c_equal c_colon 'Due Qty.' c_colon
                    into v_qty.
      concatenate c_equal c_colon 'Del Date.' c_colon
                    into v_date.
      concatenate c_equal c_colon 'Vendor.' c_colon
                    into v_name.
      concatenate c_equal c_colon 'Buyer.' c_colon
                    into v_eknam.
      concatenate c_equal c_colon 'Vendor Code.' c_colon
                    into v_lifnr.
    concatenate
             v_po v_matnr v_maktx v_qty
             v_date v_name v_eknam v_lifnr
             into i_download
             SEPARATED BY con_tab.
      append i_download .
    clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
    clear wa_output.
    loop at i_output into wa_output.
       on change of wa_output-ebeln.
         clear v_lines.
         loop at i_eket into wa_eket
                 where ebeln = wa_output-ebeln.
           v_lines = v_lines + 1.
           clear wa_eket.
         endloop.
    **-- Checking of page break
         v_lines = sy-linno + v_lines .
         if 55 < v_lines  .
           write:/0(161) sy-uline.
           new-page.
         endif.
      clear v_lines.
          loop at i_eket into wa_eket
                  where ebeln = wa_output-ebeln.
            v_lines = v_lines + 1.
            clear wa_eket.
          endloop.
    *-- Calculating the due qty.
        wa_output-dumng = wa_output-menge - wa_output-wemng.
    *-- Writing the Line items of the PO.
        read table i_ekpo into wa_ekpo
              with key ebeln = wa_output-ebeln
                       ebelp = wa_output-ebelp.
         l_rate = wa_ekpo-netpr / wa_ekpo-peinh.
    *-- Writing of PO detail
         if wa_output-dumng gt 0 .
         v_qty = wa_output-dumng.
        v_date1 = wa_output-eindt.
        v_maktx = wa_output-maktx.
         if wa_output-maktx+0(1) = '"' .
                concatenate  c_equal wa_output-maktx
                   into v_maktx  .
             else .
                concatenate  c_equal c_colon wa_output-maktx c_colon
                   into v_maktx  .
             endif .
       if wa_output-name1+0(1) = '"' .
                concatenate  c_equal wa_output-name1
                   into v_name  .
             else .
                concatenate  c_equal c_colon wa_output-name1 c_colon
                   into v_name  .
             endif .
        v_name = wa_output-name1.
        v_lifnr = wa_output-lifnr.
         write wa_output-eindt to v_date1 DD/MM/YYYY.
         concatenate '="' wa_output-ebeln '/'
                wa_output-ebelp '"' into v_po .
         concatenate '="' wa_output-matnr '"' into v_matnr .
             concatenate  c_equal c_colon wa_output-maktx c_colon
               into v_maktx  .
              concatenate  c_equal c_colon wa_output-dumng c_colon
               into v_qty1  .
               concatenate  c_equal c_colon wa_output-eindt c_colon
               into v_date1  .
              concatenate  c_equal c_colon wa_output-name1 c_colon
               into v_name  .
                concatenate  c_equal c_colon wa_output-eknam c_colon
                into v_eknam  .
              concatenate  c_equal c_colon wa_output-lifnr c_colon
               into v_lifnr  .
              concatenate  c_equal c_colon wa_mard-werks '/'
               wa_mard-lgort c_colon
               into v_lgort .
                 concatenate '="' wa_output-lifnr '"' into v_lifnr .
    condense:v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
         concatenate
             v_po v_matnr v_maktx v_qty
             v_date1 v_name v_eknam v_lifnr
             into i_download
             SEPARATED BY con_tab.
        concatenate con_cret i_download INTO i_download .
        append i_download .
      endif.
    clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
    endloop.
    ENDFORM.                    " fill_report_csv
    *&      Form  f_send_internet_mail
          text
    -->  p1        text
    <--  p2        text
    FORM f_send_internet_mail.
    Variables
    data:   it_packing_list like sopcklsti1 occurs 0 with header line,
            it_contents like solisti1 occurs 0 with header line,
            it_receivers like somlreci1 occurs 0 with header line,
            it_attachment like solisti1 occurs 0 with header line,
            gd_cnt type i,
            gd_sent_all(1) type c,
            gd_doc_data like sodocchgi1,
            gd_error type sy-subrc.
    data:   it_message type standard table of SOLISTI1 initial size 0
                    with header line.
    data : found_receiver type c,
           v_title(80) type c,
           l_text(180) type c.
    Fill the document data.
      gd_doc_data-doc_size = 1.
    Adds text to email text table
      append 'Pls see attached open purchase order report.' to it_message.
      append '' to it_message.
      concatenate 'Note: This is system generated report'
                  ', figures may subject to actual physical count.'
                  into l_text separated by space.
      append l_text to it_message.
    Populate the subject/generic message attributes
      CLEAR gd_doc_data.
      READ TABLE i_download INDEX w_cnt.
      gd_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( i_download ).
      gd_doc_data-obj_langu  = sy-langu.
      gd_doc_data-obj_name   = 'SAPRPT'.
    if p_asdate is initial .
         concatenate p_title ' '
                  sy-datum sy-uzeit into v_title separated by space.
    else .
        concatenate p_title ' '
                 p_bldat p_cputm into v_title separated by space.
    endif .
      gd_doc_data-obj_descr  = v_title .
      gd_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = i_download[].
    Describe the body of the message
      clear it_packing_list.
      refresh it_packing_list.
      it_packing_list-transf_bin = space.
      it_packing_list-head_start = 1.
      it_packing_list-head_num = 0.
      it_packing_list-body_start = 1.
      describe table it_message lines it_packing_list-body_num.
      it_packing_list-doc_type = 'RAW'.
      append it_packing_list.
    Create attachment notification
      it_packing_list-transf_bin = 'X'.
      it_packing_list-head_start = 1.
      it_packing_list-head_num   = 1.
      it_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES it_packing_list-body_num.
      it_packing_list-doc_type   =  'XLS'.
      it_packing_list-obj_descr  =  'OPEN PURCHASE ORDER' .
      it_packing_list-obj_name   =  'PO.XLS' .
      it_packing_list-doc_size   =  it_packing_list-body_num * 255.
      APPEND it_packing_list.
    assign SAP user smtp address from successful retrieval.
      loop at p_email.
    Add the recipients email address
         found_receiver = 'X' .
         it_receivers-receiver = p_email-low.
         it_receivers-rec_type = 'U'.
         it_receivers-com_type = 'INT'.
         it_receivers-notif_del = ''.
         it_receivers-notif_ndel = 'X'.
         append it_receivers .
      endloop .
    Add default recipient email when unable to locate purc group email
       if found_receiver is initial .
           it_receivers-receiver = p_email.
           it_receivers-rec_type = 'U'.
           it_receivers-com_type = 'INT'.
           it_receivers-notif_del = ''.
           it_receivers-notif_ndel = 'X'.
          append it_receivers.
       endif .
    Call the FM to post the message to SAPMAIL
      call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           exporting
                document_data              = gd_doc_data
                put_in_outbox              = 'X'
                commit_work                = 'X'
           importing
                sent_to_all                = gd_sent_all
           tables
                packing_list               = it_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = it_receivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    Store function module return code
      gd_error = sy-subrc.
    Get it_receivers return code
      loop at it_receivers.
      endloop.
    Instructs mail send program for SAPCONNECT to send email.
      wait up to 2 seconds.
      if gd_error eq 0.
          submit rsconn01 with mode = 'INT'
                        with output = ' '
                        and return.
      endif.
    ENDFORM.                    " f_send_internet_mail

    Hi,
    go through this link,
    http://www.sapdevelopment.co.uk/reporting/email/emailhome.htm
    you have some sample programs.
    Regards,
    Raghavendra

  • Report output via E-mail

    Hi all,
    i have a written a report where i need to send the report output to somebody via
    E-mail.i am sending this report output via E-mail successfully.The receiver receives, my output in excel format.but this excel is not <b>pivoted</b>.
    i want , the receiver should get my output in pivoted excel format.i.e my output data should be exactly fit in the excel sheet.
    now the columns in excel sheet are overlapping.once i double clicked, the columns are getting separated.i do not want to double click.i want all the columns should come properly i.e excel field  length should be adjusted as per the output field length.
    i am giving my coding below.plz suggest how i can do the above thing .it's urgent.
    any idea will be highly appreaciated.
    Regards
    if not p_email1 is initial.
         perform fill_report_csv.
         perform f_send_internet_mail.
      endif.
    FORM fill_report_csv.
       data :   l_text(232) type c,
               v_matnr1(21) type c,
               v_matnr(21) type c,
               v_matkl(14) type c,
               v_maktx(45) type c,
               v_ttlstk(14) type c,
               v_verpr(14) type c,
               v_werks(14) type c,
               v_lgort(14) type c,
               v_char(10) type c,
               v_stks type p ,
               v_po(40) type c,
               v_qty(13) type c,
                v_qty1 type sy-datum,
               v_date(15) type c,
               v_date1(15) TYPE C,
               v_name(35) type c,
               v_eknam(18) type c,
               v_lifnr(15) type c,
            l_po(40) type c,
            v_matnr(20) type c,
             l_rate(11) type  p decimals 5,
             l_flag type c.
      concatenate c_equal c_colon 'PO no.' c_colon
                    into v_po.
      concatenate c_equal c_colon 'Material no.' c_colon
                    into v_matnr.
      concatenate c_equal c_colon 'Description.' c_colon
                    into v_maktx.
      concatenate c_equal c_colon 'Due Qty.' c_colon
                    into v_qty.
      concatenate c_equal c_colon 'Del Date.' c_colon
                    into v_date.
      concatenate c_equal c_colon 'Vendor.' c_colon
                    into v_name.
      concatenate c_equal c_colon 'Buyer.' c_colon
                    into v_eknam.
      concatenate c_equal c_colon 'Vendor Code.' c_colon
                    into v_lifnr.
    concatenate
             v_po v_matnr v_maktx v_qty
             v_date v_name v_eknam v_lifnr
             into i_download
             SEPARATED BY con_tab.
      append i_download .
    clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
    clear wa_output.
    loop at i_output into wa_output.
       on change of wa_output-ebeln.
         clear v_lines.
         loop at i_eket into wa_eket
                 where ebeln = wa_output-ebeln.
           v_lines = v_lines + 1.
           clear wa_eket.
         endloop.
    **-- Checking of page break
         v_lines = sy-linno + v_lines .
         if 55 < v_lines  .
           write:/0(161) sy-uline.
           new-page.
         endif.
      clear v_lines.
          loop at i_eket into wa_eket
                  where ebeln = wa_output-ebeln.
            v_lines = v_lines + 1.
            clear wa_eket.
          endloop.
    *-- Calculating the due qty.
        wa_output-dumng = wa_output-menge - wa_output-wemng.
    *-- Writing the Line items of the PO.
        read table i_ekpo into wa_ekpo
              with key ebeln = wa_output-ebeln
                       ebelp = wa_output-ebelp.
         l_rate = wa_ekpo-netpr / wa_ekpo-peinh.
    *-- Writing of PO detail
         if wa_output-dumng gt 0 .
         v_qty = wa_output-dumng.
        v_date1 = wa_output-eindt.
        v_maktx = wa_output-maktx.
         if wa_output-maktx+0(1) = '"' .
                concatenate  c_equal wa_output-maktx
                   into v_maktx  .
             else .
                concatenate  c_equal c_colon wa_output-maktx c_colon
                   into v_maktx  .
             endif .
       if wa_output-name1+0(1) = '"' .
                concatenate  c_equal wa_output-name1
                   into v_name  .
             else .
                concatenate  c_equal c_colon wa_output-name1 c_colon
                   into v_name  .
             endif .
        v_name = wa_output-name1.
        v_lifnr = wa_output-lifnr.
         write wa_output-eindt to v_date1 DD/MM/YYYY.
         concatenate '="' wa_output-ebeln '/'
                wa_output-ebelp '"' into v_po .
         concatenate '="' wa_output-matnr '"' into v_matnr .
             concatenate  c_equal c_colon wa_output-maktx c_colon
               into v_maktx  .
              concatenate  c_equal c_colon wa_output-dumng c_colon
               into v_qty1  .
               concatenate  c_equal c_colon wa_output-eindt c_colon
               into v_date1  .
              concatenate  c_equal c_colon wa_output-name1 c_colon
               into v_name  .
                concatenate  c_equal c_colon wa_output-eknam c_colon
                into v_eknam  .
              concatenate  c_equal c_colon wa_output-lifnr c_colon
               into v_lifnr  .
              concatenate  c_equal c_colon wa_mard-werks '/'
               wa_mard-lgort c_colon
               into v_lgort .
                 concatenate '="' wa_output-lifnr '"' into v_lifnr .
    condense:v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
         concatenate
             v_po v_matnr v_maktx v_qty
             v_date1 v_name v_eknam v_lifnr
             into i_download
             SEPARATED BY con_tab.
        concatenate con_cret i_download INTO i_download .
        append i_download .
      endif.
    clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
    endloop.
    ENDFORM.                    " fill_report_csv
    *&      Form  f_send_internet_mail
          text
    -->  p1        text
    <--  p2        text
    FORM f_send_internet_mail.
    Variables
    data:   it_packing_list like sopcklsti1 occurs 0 with header line,
            it_contents like solisti1 occurs 0 with header line,
            it_receivers like somlreci1 occurs 0 with header line,
            it_attachment like solisti1 occurs 0 with header line,
            gd_cnt type i,
            gd_sent_all(1) type c,
            gd_doc_data like sodocchgi1,
            gd_error type sy-subrc.
    data:   it_message type standard table of SOLISTI1 initial size 0
                    with header line.
    data : found_receiver type c,
           v_title(80) type c,
           l_text(180) type c.
    Fill the document data.
      gd_doc_data-doc_size = 1.
    Adds text to email text table
      append 'Pls see attached open purchase order report.' to it_message.
      append '' to it_message.
      concatenate 'Note: This is system generated report'
                  ', figures may subject to actual physical count.'
                  into l_text separated by space.
      append l_text to it_message.
    Populate the subject/generic message attributes
      CLEAR gd_doc_data.
      READ TABLE i_download INDEX w_cnt.
      gd_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( i_download ).
      gd_doc_data-obj_langu  = sy-langu.
      gd_doc_data-obj_name   = 'SAPRPT'.
    if p_asdate is initial .
         concatenate p_title ' '
                  sy-datum sy-uzeit into v_title separated by space.
    else .
        concatenate p_title ' '
                 p_bldat p_cputm into v_title separated by space.
    endif .
      gd_doc_data-obj_descr  = v_title .
      gd_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = i_download[].
    Describe the body of the message
      clear it_packing_list.
      refresh it_packing_list.
      it_packing_list-transf_bin = space.
      it_packing_list-head_start = 1.
      it_packing_list-head_num = 0.
      it_packing_list-body_start = 1.
      describe table it_message lines it_packing_list-body_num.
      it_packing_list-doc_type = 'RAW'.
      append it_packing_list.
    Create attachment notification
      it_packing_list-transf_bin = 'X'.
      it_packing_list-head_start = 1.
      it_packing_list-head_num   = 1.
      it_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES it_packing_list-body_num.
      it_packing_list-doc_type   =  'XLS'.
      it_packing_list-obj_descr  =  'OPEN PURCHASE ORDER' .
      it_packing_list-obj_name   =  'PO.XLS' .
      it_packing_list-doc_size   =  it_packing_list-body_num * 255.
      APPEND it_packing_list.
    assign SAP user smtp address from successful retrieval.
      loop at p_email.
    Add the recipients email address
         found_receiver = 'X' .
         it_receivers-receiver = p_email-low.
         it_receivers-rec_type = 'U'.
         it_receivers-com_type = 'INT'.
         it_receivers-notif_del = ''.
         it_receivers-notif_ndel = 'X'.
         append it_receivers .
      endloop .
    Add default recipient email when unable to locate purc group email
       if found_receiver is initial .
           it_receivers-receiver = p_email.
           it_receivers-rec_type = 'U'.
           it_receivers-com_type = 'INT'.
           it_receivers-notif_del = ''.
           it_receivers-notif_ndel = 'X'.
          append it_receivers.
       endif .
    Call the FM to post the message to SAPMAIL
      call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           exporting
                document_data              = gd_doc_data
                put_in_outbox              = 'X'
                commit_work                = 'X'
           importing
                sent_to_all                = gd_sent_all
           tables
                packing_list               = it_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = it_receivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    Store function module return code
      gd_error = sy-subrc.
    Get it_receivers return code
      loop at it_receivers.
      endloop.
    Instructs mail send program for SAPCONNECT to send email.
      wait up to 2 seconds.
      if gd_error eq 0.
          submit rsconn01 with mode = 'INT'
                        with output = ' '
                        and return.
      endif.
    ENDFORM.                    " f_send_internet_mail

    ans

  • Submiting Report Request via DB Proc.

    Hello,
    Is there a way to submit a report request to the report server via a database procedure?
    I have a situation where depending on the report name, userid, email addr, report-parameters, frequency etc. stored in a table, the database procedure SHOULD send the report request to the report server.
    Any help is appreciated.
    Thanks
    Manish

    If you are running 7.3.4 or later of the Database, you can do this.
    First, set up reports for web reporting - i.e. you are able to run a report by submitting a URL (see the Reports Server configuration whitepaper on OTN and the doc. if you don't know how to do this).
    Then, check out the Oracle7/Oracle8 Application Server guide - there is a db package called UTL_HTTP which will allow you to call a URL from a stored procedure - which is all that is needed to run a report from a stored procedure! Simply build the URL up and submit it. If you have Reports 6.0 patch 1 or later, you also have access to the Reports Server queue in the database, so you can programatically check the status of the job just submitted (use the JOB= parameter to uniquely identify your job).
    Regards
    The Oracle Reports Team http://technet.oracle.com

  • Can't connect to Report Server via Management Studio

    Hi,
    I have a local installation of SQL Server 2005 (Developer Edition) on XP Professional SP2, with Reporting Services, Integration Services, and Analysis Server installed.
    I can connect to Integration Services and Analysis Server via the SQL Server Management Studio, but not to the Report Server. I can access and use the Report Server installation via http://localhost/Reports and http://localhost/ReportServer, and everything checks out on the Reporting Services Configuration tool, so the server appears to be working fine.
    I've uninstalled/re-formatted/reinstalled the services (with all default options, and services running as "Local Service"), but always end up with the following error when connecting to Report Server via Management Studio:
    The request failed with HTTP status 503: Service Unavailable. (Microsoft.SqlServer.Management.UI.RSClient) ------------------------------
    Program Location:
       at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
       at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
       at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
       at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
       at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
       at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
    Any hints would be appreciated...
    Thanks,
    /vijayan

    Here is the report server log:
    <Header>
      <Product>Microsoft SQL Server Reporting Services Version 9.00.2047.00</Product>
      <Locale>en-US</Locale>
      <TimeZone>AUS Eastern Standard Time</TimeZone>
      <Path>C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\LogFiles\ReportServerService__06_22_2006_09_34_56.log</Path>
      <SystemName>COUNTD2</SystemName>
      <OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
      <OSVersion>5.2.3790.65536</OSVersion>
    </Header>
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing ConnectionType to '0'  as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing IsSchedulingService to 'True'  as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing IsNotificationService to 'True'  as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing IsEventService to 'True'  as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False'  as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing IsWebServiceEnabled to 'True'  as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing ProcessRecycleOptions to '0'  as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing WatsonFlags to '1064'  as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException'  as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException'  as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing SecureConnectionLevel to '0'  as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing DisplayErrorLink to 'True'  as specified in Configuration file.
    ReportingServicesService!library!4!22/06/06-09:34:57:: i INFO: Initializing WebServiceUseFileShareStorage to 'False'  as specified in Configuration file.
    ReportingServicesService!resourceutilities!4!22/06/06-09:34:57:: i INFO: Reporting Services starting SKU: Enterprise
    ReportingServicesService!resourceutilities!4!22/06/06-09:34:57:: i INFO: Evaluation copy: 0 days left
    ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: Database Cleanup (NT Service) timer enabled: Next Event: 600 seconds.  Cycle: 600 seconds
    ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds.  Cycle: 60 seconds
    ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds.  Cycle: 60 seconds
    ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: Execution Log Entry Expiration timer enabled: Next Event: 59102 seconds.  Cycle: 86400 seconds
    ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds.  Cycle: 60 seconds
    ReportingServicesService!runningjobs!4!22/06/06-09:34:57:: i INFO: SQM timer timer enabled: Next Event: 62702 seconds.  Cycle: 86400 seconds
    ReportingServicesService!library!8!22/06/06-09:34:58:: i INFO: Catalog SQL Server Edition = Enterprise
    ReportingServicesService!crypto!8!22/06/06-09:34:58:: i INFO: Initializing crypto as user: OBJECTIVEWARE\s.count
    ReportingServicesService!crypto!8!22/06/06-09:34:58:: i INFO: Exporting public key
    ReportingServicesService!crypto!8!22/06/06-09:34:58:: i INFO: Performing sku validation
    ReportingServicesService!crypto!8!22/06/06-09:34:58:: i INFO: Importing existing encryption key
    ReportingServicesService!dbpolling!8!06/22/2006-09:34:58:: EventPolling polling service started
    ReportingServicesService!dbpolling!8!06/22/2006-09:34:58:: NotificationPolling polling service started
    ReportingServicesService!dbpolling!8!06/22/2006-09:34:58:: SchedulePolling polling service started
    ReportingServicesService!dbpolling!8!06/22/2006-09:34:58:: UpgradePolling polling service started
    ReportingServicesService!dbpolling!b!22/06/06-09:34:58:: NotificationPolling heartbeat thread started.
    ReportingServicesService!dbpolling!a!22/06/06-09:34:58:: EventPolling heartbeat thread started.
    ReportingServicesService!dbpolling!c!22/06/06-09:34:58:: Polling started
    Here is the IIS log:
    #Software: Microsoft Internet Information Services 6.0
    #Version: 1.0
    #Date: 2006-06-21 00:00:21
    #Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
    2006-06-21 00:00:21 W3SVC1 203.166.122.177 GET /iisstart.htm - 80 - 203.166.122.223 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727;+InfoPath.1) 200 0 64
    #Software: Microsoft Internet Information Services 6.0
    #Version: 1.0
    #Date: 2006-06-21 03:50:53
    #Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
    2006-06-21 03:50:53 W3SVC1 203.166.122.177 POST /ReportServer/ReportService2005.asmx - 80 - 203.166.122.218 - 200 0 0
    2006-06-21 03:51:15 W3SVC1 203.166.122.177 POST /ReportServer/ReportService2005.asmx - 80 - 203.166.122.218 - 500 0 0
    2006-06-21 03:51:15 W3SVC1 203.166.122.177 POST /ReportServer/ReportService2005.asmx - 80 - 203.166.122.218 - 200 0 0
    2006-06-21 03:51:31 W3SVC1 203.166.122.177 POST /ReportServer/ReportService2005.asmx - 80 - 203.166.122.218 - 500 0 0
    2006-06-21 03:51:31 W3SVC1 203.166.122.177 POST /ReportServer/ReportService2005.asmx - 80 - 203.166.122.218 - 500 0 0
    #Software: Microsoft Internet Information Services 6.0
    #Version: 1.0
    #Date: 2006-06-21 07:51:41
    #Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
    2006-06-21 07:51:41 W3SVC1 203.166.122.177 GET /iisstart.htm - 80 - 203.166.122.223 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727;+InfoPath.1) 200 0 64
    #Software: Microsoft Internet Information Services 6.0
    #Version: 1.0
    #Date: 2006-06-21 23:38:59
    #Fields: date time s-sitename s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status
    2006-06-21 23:38:59 W3SVC1 203.166.122.177 GET /Reports - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 301 0 0
    2006-06-21 23:39:16 W3SVC1 203.166.122.177 GET /Reports/Home.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 302 0 0
    2006-06-21 23:39:25 W3SVC1 203.166.122.177 GET /Reports/Pages/Folder.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 500 0 0
    2006-06-21 23:39:25 W3SVC1 203.166.122.177 GET /Reports/js/ReportingServices.js - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 64
    2006-06-21 23:39:25 W3SVC1 203.166.122.177 GET /Reports/styles/ReportingServices.css - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 64
    2006-06-21 23:39:25 W3SVC1 203.166.122.177 GET /Reports/images/blank.gif - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 64
    2006-06-21 23:39:25 W3SVC1 203.166.122.177 GET /Reports/images/48error.jpg - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 64
    2006-06-21 23:40:11 W3SVC1 203.166.122.177 GET /Reports - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 301 0 0
    2006-06-21 23:40:11 W3SVC1 203.166.122.177 GET /Reports/Home.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 302 0 0
    2006-06-21 23:40:13 W3SVC1 203.166.122.177 GET /Reports/Pages/Folder.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 500 0 0
    2006-06-21 23:41:26 W3SVC1 203.166.122.177 GET /Reports/home.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 302 0 0
    2006-06-21 23:41:28 W3SVC1 203.166.122.177 GET /Reports/Pages/Folder.aspx - 80 - 203.166.122.177 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.2;+SV1;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 500 0 0
    2006-06-21 23:43:52 W3SVC1 203.166.122.177 GET /reports - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 301 0 0
    2006-06-21 23:43:52 W3SVC1 203.166.122.177 GET /reports/Home.aspx - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 302 0 0
    2006-06-21 23:43:53 W3SVC1 203.166.122.177 GET /reports/Pages/Folder.aspx - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 500 0 0
    2006-06-21 23:43:54 W3SVC1 203.166.122.177 GET /Reports/js/ReportingServices.js - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 200 0 64
    2006-06-21 23:43:54 W3SVC1 203.166.122.177 GET /Reports/styles/ReportingServices.css - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 200 0 64
    2006-06-21 23:43:54 W3SVC1 203.166.122.177 GET /Reports/images/blank.gif - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 200 0 64
    2006-06-21 23:43:54 W3SVC1 203.166.122.177 GET /Reports/images/48error.jpg - 80 - 203.166.122.218 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.1;+SV1;+.NET+CLR+1.1.4322;+InfoPath.1;+.NET+CLR+2.0.50727) 200 0 64
    Thanks,
    Roshan.

  • Assign queries to authorization role via PFCG maintenace

    Hi,
    I would like to assign several queries to existing authorization roles.
    Therefore I am using the transaction PFCG > maintain the menu > add "other" SAP BW Query URL and fill in the name as well as object description.
    However, the new query will not be shown in the BEx Analyzer in the role folder.
    What do I have to administrate that the query will be shown in the role menu (BEx Analyzer)?
    Thanks!

    Dear Arvind,
    thanks for your reply.
    As an authorization administrator for SAP BI I do have the authorization for S_USER_AGR already.
    I am just testing in our development system.
    However, the query will not appear in the BEx Analyzer while selecting "Open Query" and search in "Roles".
    As far as I know queries could provided to authorization roles via BEx Analyzer.
    But does no possibility exists to maintain the authorization role via PFCG?
    Regards, Christian

  • Refresh Interactive Report Definition via PLSQL

    Hello!
    I am currently working on set of generic database-apex applications.
    That means I have two applications. The first is the admin apex application used to define columns and tables.
    The second application is the one for the end users, where they can view and edit the values.
    My problem now is: Every time the admin adds or removes a column I need to edit the user-apex application, open the region definition of all interactive reports and switch to the report attributes to add/remove the columns of the report.
    I would like to automate this step via plsql. How can I achieve this?
    I guess the first step would be to load a list of all IRs...
    select * from apex_application_page_ir where application_id = 133;
    But I don't know how to reload the columns...
    Can anyone help?
    Thanks in advance!
    BR Mike

    Hello Andre, Hello Mimi!
    Thank you for your messages.
    First to your idea Mimi, i think you brought me on the right track. Using your update statement doesn't works for me.
    There are some missing permissions I couldn't grant and in addition I think this would hardly work because apex_application_page_ir is a complex view.
    But I am currently working on a solution using the wwv_flow_worksheet_standard.synch_report_columns function. Code like this:
    DECLARE
    l_flow_id NUMBER (20);
    l_region_id NUMBER (20);
    l_query VARCHAR2 (4000);
    l_result VARCHAR2 (4000);
    BEGIN
    SELECT application_id, region_id, sql_query
    INTO l_flow_id, l_region_id, l_query
    FROM apex_application_page_ir
    WHERE page_id = 9 AND application_id = 133;
    APEX_040100.wwv_flow_worksheet_standard.synch_report_columns (p_flow_id => l_flow_id,
    p_region_id => l_region_id,
    p_query => l_query,
    p_add_new_cols_to_default_rpt => 'Y');
    COMMIT;
    END;
    Unfortunately it doesn't work. When executing the synch_report_columns procedure the following error raises.
    ORA-01003: no statement parsed
    ORA-06512: at "SYS.DBMS_SYS_SQL", line 1685
    ORA-06512: at "SYS.DBMS_SQL", line 629
    ORA-06512: at "APEX_040100.WWV_FLOW_WIZARD_API", line 840
    ORA-06512: at "APEX_040100.WWV_FLOW_WORKSHEET_STANDARD", line 2735
    ORA-06512: at line 23
    Maybe you or someone else can reproduce the error?
    Therefor you simply need an interactive report on a page, based on a view. Remove some column of the view definition-the IR will display an error like this:
    ORA-20001: get_dbms_sql_cursor error ORA-00904: "DUV_FOCUS_OFFSET": invalid identifier
    Then execute the code above (use your page and app_id).
    After the execution the IR should work again. In my opinion...
    @Andre: The application I am working on is a critical pice of software used in a highly sophisticated semiconducter fab.
    It is simply impossible to train some of the shift leaders or operators on apex, in fact it is a great thread if someone else can change the application and produces a downtime.
    So for me it is necessary to script everything as far as possible. I finished nearly everything, simply the synch of the report columns is missing...
    BR Mike

  • BIP Report access via URL in OBIEE

    Experts, I want to access a BIP report via URL in OBIEE. Here are the details. I already have Answers request with 'Is Prompted' filters. I have a dashboard prompt. The request works according to the values given in the prompt. Say, the user gives some filter conditions in the prompt and the result returns 10 records.Now, due to some business requirements, I want the same result set(10 records) to be opened in a new window. For that we thought of using BIP and invoking this BIP report from OBIEE. Any ideas how can we accomplish this.
    thx,
    parag

    I mean to say that....assume your first view might be pivot report,then you create a BIP report from answers and place the view just below the pivot view in the dashboard.
    Globally you give those prompts ,so that when you give values....it applies to both the views in the dashboard.
    Suggest the end user instead of pop up....you can view both views at a single instance :) .......Give a meaning full name for that BIP report according to what you want to achieve
    =====================================================================
    EDITED:
    you can use go url for your pop-up .....but you need to pass the variable values of the prompt to the go-url so you can achieve your requirement.
    let the end user pass dynamically any values multiple times but the same should be passed to the go-url to get what you want.
    ========================================================================
    EDITED
    I suppose YES we need to pass all the 5 prompt values to BIP report......if user gives 3 values then it filters on those 3 values and only 3 will be passed to BIP i suppose.
    Never tried this passing 3 values and next session passing 2 values.....Play around with your requirement you will achieve it.
    hope all questions are answered.Mark Points.
    By,
    KK
    Edited by: Kranthi on Jan 7, 2011 9:06 PM

  • Calling a ALV Report program via a Remote Function module.

    H All,
         The thing which I am looking out for is ,to know a technique to acheive this,
      To start with,
    For the transaction MB51-(Material Document List),which is a Report Program "RM07DOCS",I also observed that this uses a ALV to display the output.
    Now what I actually require is another extra field (from MARA table )  along with the standard output that is displayed from this report.
    Also this needs to be passed to a different UI system(build using VC ).
    So I have a RFC eg DisplayList(),where in I need to exeucte this report program ,get the output what it gives ,add my additional information what I want to and pass it as a export parameter,
    So this is the structure which I can visualise,
    FUNCTION ZFUN_MB51TXN.
    I would get all the import parameters here ,from who ever is calling my fun module,
    *Call the report program,pass the input  parameters required
    *get the output from this report program
    *send the output to the caller through export parameters
    ENDFUNCTION.
    So Here I need to know ,Can this be achieved something using Submit report or anything,Any guidelines to move further would be really of great help!

    Hi All,
    It would really be great if you can explain with the reference to the same report program,the same selection screen elemetns or something.
    Thanks,
    Archies!

  • Print BW report embedded via URL Iview

    Hi,
    We have a VC application which contains a BI report. In the VC we created a "Print" button which should print the entire contents of the VC Application. Unfortunately it seems this print is not compatible with the URL Iview since it ignores the content of the BI report.
    Is this normal ? Is there a workaround available in VC to print a BI Web application via the VC ?
    thanks

    Please let us know if there are any updates on this. I am also facing the same issue where I have a WAD report ( html link) in the VC model along with other reports in VC. The Print screen just prints the VC part and the WAD part comes as blank.
    Regards,
    Nidhi

  • Sales Analysis Report Additional Field for viewing

    Good Day Experts!
    Is it possible for us to display an additional field  to be viewed in Sales Analysis Report?
    I'm talking about a vacant field from BP Master data, and somehow append it into form settings and put it into the report?
    Is there any store procedures that we can look for prior to this matter? Our client need something more on that particular issue.
    Thank you very much

    Hi Elmar,
    It is not possible to add field on SAP sales analysis report , but you can create report based on query with required fields.
    Check http://wiki.sdn.sap.com/wiki/display/B1/D-SLSalesARModuleSQLPostedto+Wiki link for some sales queries , it might help you.
    Thanks,
    Neetu

  • Service Entry Sheet SES Reporting - Additional Planned & Unplanned Services

    Hey Experts,
    We have activated the ability for users to add additional planned and unplanned services during service entry sheet processing.  I am looking for a way to run a report which displays the amount or quantity of additional planned services (services which exceed the amount planned in the purchase order) and unplanned services which have been entered against the purchase order.
    Your thoughts would be helpful!!
    Leo.

    you can get the PackNo details of entry sheet from ESSR and of PO from EKPO. from the packno find the subpack no in ESLL. put the subpack no again in ESLL as pack number and you get the services for entry sheet and PO. you may try a logic to link both

  • Excel form of SAP-BW reports sending via mail as an attachment

    Hi Friends,
    I want to take your opinion about a scenario....
    We access SAP-BW reports in Enterprise portal, there the user can export the report to excel.
    I wish to know if it is possible that the excel form of this report could automatically be sent as an attachment via mail to the outlook accounts of users on a daily basis. Please let me know how.
    Regards,
    Amit Srivastava

    Hi,
    1st you need to congigure the Precalculation server.Inform BASIS people to do that. After that you can check in RSPRECADMIN T-code. There you can see how many servers are there in active(green light). Save your query as workbook and then distribute that workbook from tools menu. -->it will open it in new window. there you can create new setting and then provide Email-ids in 1st tab, and provide subject line and message in 2nd tab, And finally provide variables in 3rd tab. Finnaly save it and Schedule in background by providing date & time. you can use periodic also.
    Regards
    Pcrao.

  • Automatically produce Reports output via Portal

    Hi.
    I'm new to Oracle Portal, so please excuse if I ask a stupid question.
    We have some Oracle Report Builder reports, which we'd like to automate (automatically produce the output for the users). Is there some way of defining it in Portal so that it automatically via URL's or something runs these reports to produce the output automatically ?
    If not, then I suppose we'll probably be using CRON to automate them....
    Thank you.
    Marcel

    Hi,
    All the components have something have called the batch mode which submits this job
    to the job queue. This option also stores the results in the database for a period
    of time which you can change. You can see if this helps.
    thanks,
    Sharmila

  • Clearing expense reports reimbursed via payroll

    We are using i-Expnse and get many of our expense reports submitted through i-Expense that are payroll reimbursed so there is no need to pay them via AP, however, we do not have a good way to clear these expense reports in AP. They remain on hold in our AP system, we understand that we could clear them via the clear payments payment method, but this is one by one and we need to do a batch as we get hundreds of these types of expense reports. Is there another way to clear a batch of expense reports without running a "dummy" check payment batch?

    We are running 11.5.10. Invoices are imported into AP via a 3rd party Expense Reporting system. As we know, once the invoices are validated and approved in AP, accounting transactions are created, pushed to GL. Those invoices are now aging, a liablity until paid.
    We push the invoices to payroll, Batch Element Entry, pay out of payroll. And now as you stated, you have these invoices hanging in AP (aging). The original approach was to mimic a payment by touching all the tables (good luck), it created a mess. AP_AE_HEADERS, AP_AE_LINES, etc. Not worth it.
    Then we went this route, works okay, but the problem is it's hard to control what payroll does, i.e., keeping transactions in sync between AP and Payroll.
    If payroll manually creates expense reimbursements or if Payroll not reverses a reimbursemement, good luck keeping keeping in balance, what AP posts to GL and what Payroll posts to GL - we are now basically running 2 tranactional systems. Sorry, I digressed. Here is what we do now. In bank setup, created a bank where we won't run positive pay out of, the cash, and liability for this bank account are the same on so the payment journal that pushes to GL once the payment is made is a wash. We have a special pay group, the interface from Payroll back to AP updates the paygroup for the invoices to this pay group, the user runs a payment batch, confirms, etc,. Pushes to GL and now the invoices are cleared, removed from the Trial Balance. We have form personalizations so the user can never set an invoice to this special paygroup, the paygroup is set behind the scenes via our custom .pkb when interfacing from Payroll back to AP after Payroll has costed the expense reimbursements.
    Sure would be much easier if there was an API to call, clear the invoice. I've searched, don't believe one was/is available in 11.5.10. Hope this helps. Good luck.

Maybe you are looking for

  • Epson printer error after recent sw update

    I just installed the latest Snow Leopard software update, including one called Epson Driver updates. When I try to print on my Epson Workforce 500, I now get the error: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS/

  • Report Builder 6i crashes while compiling

    I have report builder 6.0.8.11.3, running on Windows XP SP2. I am connecting to a 10g database and compiling a custom report. This report was running fine in the database, i just copied to my folder and compiling from local system (connecting to the

  • Can't print PDF or word file

    my 6500 all in one printer cant print pdf , excel or word file format doc via e-print, what can i do ?

  • Sun One on Win2k "Suitable JVM could not be found"

    Installing SunOneStudio 4 CE, I get the error message: A suitable JVM could not be found. Please run the installer again using the option -is:javahome <Java Home Dir> Question: what directory do they want? the j2SDK? the JVM? where is the JVM? I trie

  • A set of fields that equal 100%

    I have a situation where I need to take four text fields and make them equal 100%. The fields them selves can vary in percent but the total of all four must equal 100 percent. Could anyone reccomend the best way to script this or if an example exist