Report Alerts are not shown on crystal server 2011

Hi,
I have created alerts on From date and To Date. The alert is shown when the difference between From Date and To Date is more than an year. It is shown properly in the crystal report designer. When I am uploading the same report to the server the alerts are not shown on the server.
Can someone help me with the same.
Thanks,
Simran

Hi Jawahar,
I have uploaded the report in CMC using Add--> Local Document.
For Alerts I have checked the Box 'Enable Alert'. Still I am not getting a Pop Up which I get in the crystal report designer. Is the Alert sent on Crystal Server by email? I have currently selected default setting in Configure Alert Notification.
Regards,
Simran

Similar Messages

Permissions are not shown correctly in Get Info on Snow Leopard client, using Tiger server w/ ACL's

Invoking "Get Info" on a file or folder which is on a shared volume hosted by a G5 running Server 10.4 fails to show meaningful permissions when done from a 10.6 iMac. It says only that the user has "custom permissions", which is true since there are ACL's in operation. However, the Owner and Group POSIX settings are not shown, only the Everyone setting shows, making it impossible to determine which user created the file (in order to resolve issues when permissions prevent intended action). The same file or folder will show Owner and Group on 10.5 systems, as well as at the 10.4 Server itself, so we do have a workaround. I have noticed, though, that I have run into permissions restrictions where I should not, such as creating a folder on a shared volume using a 10.6 system, and then not being able to save into that folder from the same system/user.
Is there something about the implementation of ACL's in Tiger that confounds Snow Leopard's Finder?

Hi,
I did two things to get it working, and haven't taken the time to sort out which did it. But it is working so it's good enough for me.
First I followed TeenTitan's suggestion, and also checked "Allow printing from the internet". I'm behind a firewall so not too concerned I'll get someone's odd photo on the printer.
Second I went back to server admin, selected the queue under queues in the Print service, then selected IPP and deselected LPR. Bonjour went grey but stayed checked.
After this I see the printer with "@ server name" appended, and it added the printer drivers like it should.
So all working well.

Special characters are not shown in compare document report in Acrobat X

Hi All,
I have a pdf document which is having some special characters like üὄ. Now I have updated the document with few corrections and while compare document in Acrobat X special characters are not shown in the report.
Can any one please look into this and give suggestion.

Hi Steve,
Thanks for your reply.
Platform - PC
Application - 3B2 and Acrobat 9
So far we have seen this kind of issue in only one document. In the below screenshot you can see 2 pdf files, the right side one is my MS pdf and the left side one is the exported pdf from 3B2 application both the files having the special characters such as . I just did the text comparison however both and is missing in the exported pdf but the reports shown the changes for characters only wherever the charactes is missing the report not shown the changes properly(See highlighted in yellow).
Please let me know if you need more deatails.

Reporting tab is not shown in the console

hi everyone
the reporting tab is not shown in the service manager console, the topology i am using is 2 servers [one for DW and the other for management server] both servers have their SQL server installed on each one, could you please tell me how i can start to get
this working or the steps i have to follow ?? isn't supposed to be working out of the box ? i have checked reporting services and they are running

Probably your report server is not pointing to the DWDATAMART database, try login to:
http://YourDWDatabase/Reports/Pages/Folder.aspx?ItemPath=%2fSystemCenter%2fServiceManager&ViewMode=List
click on DWDATAMART Connection, under connection string, do you see your DWDATAMART DB name and server name?
Antoine AL Ibry

Error adding report to Crystal Server 2011

I have a report that runs against Salesforce.com that I'm trying to add to Crystal Server 2011. The server is running version 14.0.2.364 of BI. When I try to add the report through either the CMC or through the BI Launch Pad I get the same error.
"An error has occurred: Adding Crystal Report "Quarterly Report 2011 with MF v3-2 Les Testing.rpt" failed. The server with kind rptappserver returned an error result. Failed to copy the report file to the report object. Refreshing the report object properties might have failed. Failed to read data from report file C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\Data\CrystalReportsRasServer\temp\{7FD511B8-F5DF-42AC-98D7-D2C43B1C458B}.rpt. Reason: Failed to read parameter object "
If I try to add it by saving from Crystal Reports I get "Item 1 was not found in the collection"
I'm logging on as administrator in both cases to the CR server. I did find a thread where it was suggested that checking the "No Printer" box under page setup may fix it so I tried that but got the same results. I also saw some references to firewalls, but the server is on a local subnet to my machine and all windows firewalls are turned off.
The server is a fresh install of 2008 R2 and a demo download of CR Server 2011 and Client Tools.
Any help on a direction here would be greatly appreciated. I've been banging my head against this for a while now.

I cannot offer much help, but I see the same issue.
When I create a report in Developer it runs fine in Developer, but it will not load up to Crystal Server. I can save the report with a new name and 50% of the time it will load to the Server. Sometimes when I try to load the report, it seems the Server is thinking for a long time. I hit "OK" button on server screen and then "Cancel" the report SOMETIMES shows in the list of reports. I just witnessed saving a non-loading report as another report and successfully loaded it into Server, then I ran the report in developer, closed it and tried to reload it to the server and it failed.
It appears to be completely random.
My gut tells me it has to do with the Salesforce driver (i.e. when I run it from Developer, the driver pollutes the report and chokes loading it on the server?)
Does anyone have any ideas?

Crystal Reports 2008 connecting to Crystal Server 2011

Hello SAP Experts,
I am new with the Crystal Client/Server platform and the only knowledge I have with the infrastructure is from the Crystal Server 2011 documentation I have pulled from SAP's website. I have looked at a lot of online resources but very few have the answers that I need.
I built an instance of Crystal Server 2011 running on Windows Server 2008 R2. Our clients are currently using Crystal Reports 2008 client where they connect directly to a SQL 2008 Data Warehouse to pull reports.
For security reasons, they want to implement Crystal Server 2011 to connect to the SQL 2008 Data Warehouse as a single point of entry, instead of having several Crystal Reports 2008 clients connecting to the SQL Data Warehouse.
The idea is to have the clients connect to the Crystal Server; the Crystal Server will then connect to the SQL Data Warehouse so clients can pull reports from it.
My questions are:
1. Is it possible to connect a Crystal Reports 2008 client to Crystal Server 2011? If so, how do I accomplish this?
2. Do I need to create a Universe in order for the Crystal clients to pull data/reports from the SQL 2008 Data Warehouse? Or is there a way I can create a connection without a Universe?
Any help offered is greatly appreciated.
Thank you.

Check our site for more info but in general CR fully respects all DB security, if the user does not have permissions on the table used in the report the report will fail to run.

Why Arabic charactes in PDF are not shown ?

I have Microsoft IIS , oracle report server , Acrobat writer 5 and report builder 6
in Windows2000 with Arabic language enabled.
In live previewer and HTML format Arabic characters are shown correctly in my report
also when i print my report by Acrobat distiller printer, but when i generate to file PDF ,
arabic characters are not shown correctly (they are not shown as question marks )
this meanes that my reports in IE5 as PDF do not show arabic characters.
How Can I define my Acrobat distiller printer as default printer used by web CGI (rwcgi60) ?
I have found this statment in developer documents:
"PDF does not support multi-byte character sets."
wether it meanes that i can not have reports with arabic characters as PDF?
thanks for your help.

Jalal,
BiDi was not supported in PDF output in reports 6/6i. It is supported in reports 9i.
Thanks
The Oracle Reports team

Custom Work Manager not shown in WL Server Admin Console

An application scoped custom work manager is to be configured, for which the files weblogic-application.xml, weblogic-ejb-jar.xml, weblogic.xml have been defined. After it is deployed on the server, custom work manager is not being shown in the list on console -> deployments -> application -> monitoring -> workload.
What could be the reason? Is there something which is missed out?

Hi Justin,
According to the error message and the issue can be caused by the edition of your SSRS is not support for the custom data provider. For example the express edition have limitation support on this:
Features Supported by the Editions of SQL Server 2012 .
If your edition is the supportted edition and the issue can be caused by the custom data provider do not necessarily support all the functionality supplied by Reporting Services data processing extensions. In addition, some OLE DB data providers and ODBC
drivers can be used to author and preview reports, but are not designed to support reports published on a report server. For example, the Microsoft OLE DB Provider for Jet is not supported on the report server. For more information, see
Data Processing Extensions and .NET Framework Data Providers (SSRS).
If you are running on a 32-bit platform, the data provider must be compiled for a 32-bit platform. If you are running on a 64-bit platform, the data provider must be compiled for the 64-bit platform. You cannot use a 32-bit data provider wrapped with 64-bit
interfaces on a 64 bit platform.
More details information:Data Sources Supported by Reporting Services (SSRS)
Similar thread for your reference：
ERROR: An attempt has been made to use a data extension 'SQL' that is not registered for
this report server.
Error when viewing SSRS report with SQL Azure as data source
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

[Solved] Some icons are not shown in certain websites.

For example:
trello.com
gist.github.com
is like this:
many icons are not shown correctly. It happens to all browsers(firefox,chromium,opera) I tried in archlinux. So I guess it' s an issue with some graphic library.
It also happens to a gitlab server site I set up:
How can I debug this? Does it happen at your place?
EDIT: Solved by uninstalling change colors extension for chromium, deleting .mozilla solves for firefox, still happens for opera.
Last edited by xgdgsc (2013-06-08 12:38:08)

Sorry. I don't understand. Perhaps creating a phone case will be the better way to go(?). Phone cases can be obtained here;
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Ludek

Report Painter - data not shown at first selection

Hello,
we have a Report Painter report for cost centers.
If we start the report with normal selection the values of the cost centers are not shown at the first look.
The window on the right side only shows the sum for the whole cost center group, but if we select one single cost center the report shows
"This report has no pages. Check the following layout settings: Threshold values, Summation levels, Zero line suppression."
But there are values, but they are only shown if we switch to another cost center and then switch back.
All rows that are selected the first time show no values, at the second time the values are there.
Does anybody know the reason for this?
Thank you & regards
Britta

Hello,
starting the report with the selection of a cost center group.
This group is shown on the left side, the values in sum of the right side.
To have a detailled look on the single values of the cost centers I expand the cost center group by clicking on the small triangle, all included cost centers are now showns on the left side.
To see the value of a cost center I click on the respective cost center, on the right side the "no data" information is shown.
Clicking on the next cost center also the "no data" information is shown.
Now switch back to the first cost center on the left side and then the values are shown on the right side.

Workflows are not shown in the OAM aplications front end but exists in LDAP

Hi
In my OAM application, Workflows are not shown in the front end but exists in LDAP. Any idea how the workflows are displayed on the front end.
due to this not there in production, when i tried to create a user, it says i donot have access rights.
When i try to create and add workflows in the LDAP, the server rejects with the following error:
Error adding object 'dn: obname=R20030715T164905882142,obpolicyContainerId=WorkflowDB, obcontainerId=Policies, o=Oblix,ou=oblixconfigentries,. The error sent by the server was 'Already exists':
the entry is : last line shows obwfstatus as deleted ...
dn: obwfinstanceid=7e872056d0ce012f0000BD537dc00000,obcontainerId=workflowInstances,o=Oblix,ou=oblixconfigentries, dc=axa,dc=co,dc=uk
modifyTimestamp;adcsn-5038aa2900000001000f;vucsn-5038aa2900000001000f: 20120825103356Z
modifiersName;adcsn-5038aa2900000001000e;vucsn-5038aa2900000001000e: uid=oblixadmin,ou=admins,dc=uk
obwfstatus;adcsn-5038aa2900000001000d;vucsn-5038aa2900000001000d: 8
obwfstatus;vdcsn-5038aa2900000001000d;deleted:

Edit the targetNamespace to any name less than 60 chars and they try again
Regards,
Prateek

Pictures which were found in shared folder are not shown as thumbnails

Hi,
I'm indexing SharePoint sites and File Shared folder with Pictures.
In the search results page the pictures from SharePoint are shown as thumbnails (there is a preview of the picture) but the pictures from fileshare are not shown that way (it is shown as a preview of a video but empty, without preview image).
What should i set?
I added a refiner of "Content Type" and it seems that the content type is "image/jpeg".
keren tsur

Hi,
First create a custom display template which will read the image using the Path property as a thumbnail. Make it smaller etc using CSS. Next up create a custom Result Type which triggers on:
ContentType Equals any of... image/jpeg
ContentSource Equals and of... <name of file share content source>
and pick your custom display template in the dropdown on the Result Type page.
Depending on policy settings the browser will or will not read the image from the file share and display it inline.
Thanks,
Mikael Svenson
Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
http://techmikael.blogspot.com/
Author of Working with FAST Search Server 2010 for SharePoint

Close, new, back, forward icons are not shown

Close, new, back, forward icons in firefox are not shown, so it makes difficult to use firefox. I am using latest firefox in ubuntu 11.04.
Already asked here but no response :( superuser.com/questions/559381/in-firefox-back-tab-close-new-tab-icon-is-not-shown I have posted screenshot there, It will be helpful so posting the link here.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Measure Values are not shown in the pivot tables

Measures without aggregation (in rpd) are not shown in pivot table.
Im trying to add multiple columns in the fact table as measures,one which is summable had has the SUM function and three which are not summable.
The initial report will be as follows and I have been able to get the data displayed.
Year | Month| Company Name| SUM(C1)| C2|C3
However if I pivot the table as follows data in column C2 and C3 are not Displayed.
Columns
     Year
          Month
          Company
Rows
Measure Lablel
Measures
     SUM(C1)
               C2
               C3
Should we have an aggregation rule applued in C2 and C3 ?

Yes, all the column entries must have agg rule. You can specify one such as 'first' in the pivot table.

Button Images are not shown

Dear All,
In one of our test instance, some button images are not shown, whereas some are.
They are shown as grey button.
I searched metalink, according to them patch 1238573 should be installed, which is already installed.
What could be the reason?
Also, is there any way to find out which images are missing?
Regards,
Ashish Shah

Hi
I've seen this happen a few times. The solution is usually to synchronise something called 'the X-Server' with the middle tier. I'm afraid that the technology is over my head, but it does work!
The X-Server controls how images are rendered in the e-Business Suite. Your DBA should know what this is and it's a simple matter of stopping and restrating the X-server.
That should do the trick!
Regards
Tim

Report Alerts are not shown on crystal server 2011

Similar Messages

Maybe you are looking for