Report Bursting with more then 1 report (sheet)

Hi All,
I have an query
this is regarding Scheduling the report. I have 1 report it contains 3 report sheets.
for eg: country1, coungry2, country3
when i trying to Burst the report with only 1 report sheet (country1) it is working find. but unable to burst with more than 1 report sheet i am following the report bursting steps correctly .
i am bursting the report at SAP BO INFOVIEW with the help of Publication option.
i am using SAP BO INFOVIEW 3.1
Thanks in advance
Ranjeet

Hi Farzana,
Thanks for your replay and qry.
in Publication i have select report field =Dynamic recipient mapping
and it is working fine when i am bursting the report with 1 tab/1 sheet/ 1 report
and in all three tab data belongs to same provider actually i am bursting the report on providers no which practicing in three states/country that is the reason i have mentioned. the tab name = country1, country2, country3.
please let me know if any concern regarding the requirement.
suggest something
Regards,
Ranjeet

Similar Messages

Process message characteristic with more then ( ) 30 digits in PI-sheet

Dear all,
I am looking for a solution to populate a process message characteristic with more then 30 digits in the PI
sheet and not during control recipe generation.
I have defined a customer characteristic (with O27C) in the `Additional data for Process Instructions
and Messages` with a length of 40 Characters. Next to that in my process message i added a function
to retrieve the material master text (40 digits) and to put it into the customer characteristic as an output.
However in this set-up I get an sytax error that blocks the generation of the control recipe. The syntax
erro is due to the fact that the long text characteristic should have a value. Obviously it does not,
because I want to retrieve it from the material description. Note that the material number I use to retrieve
the text, is selected in the PI sheet itself an is unknown (unplanned Issue) at generation.
Please advise.
Cheers, Leo
Edited by: L. de Pee on Oct 6, 2009 3:08 PM

Hi.
Its BPM Standard cubeCube , 0BPM_C01 and we are populating 0fiscyear based on Instance-Id.
I have reloaded the cube and maintained Index, checked DB Stat, Roll up , compression all are done, but still facing the same issues.
Please provide me your inputs if you faced the similar issue.
Thanks in Advance.
Br
Alok

How to create a workbook in BI 7.0 with more than 15 Sheets?

Hi Experts,
i would like to know how to create a workbook with more than 15 Sheets.
One Workbook should be based on one query and the other on differents queries.
How should be the authorization? If you have any documents please just send it to me.
Cheers
G

HI
Execute one report save it in the workbook, then you can goto the tools and click insert query, like that you can add how many queries you want. then right click on the reports goto properties there in the interface tab click the check button for refrsh all the queries. finally save it with the option save existing wrokbook(beacause you already save the first query in the workbook)
Regards,
chandra.

How can I talk with more then one person at a time?

How can I talk with more then one person at a time? With Faxe time? Is thier software needed to do this or can it be done with the basic package?

You can get the drop down list by either right-clicking on the back/forward buttons, or holding down the left button until the list appears.
If you want the drop-down arrow you can add it with the Back/forward dropmarker add-on - https://addons.mozilla.org/firefox/addon/backforward-dropmarker

Oracle RAC with more then two nodes?

Hello,
knows anybody a reference client project that use Oracle RAC with more then two nodes on a Linux environment?
Many thnaks!
Norman Bock

Hello Norman,
XioTech is a SAN company that has a project called "THE TENS". They configured and ran a 10 node RH Linux Oralce 9i RAC. I understand they want to see if 32 are possible. I am sure if you ask them, they would be happy to give you the details.
http://www.xiotech.com/
Cheers

I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!

I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!!! ASAP

Hi,
Check the iChat Menu > Preferences > Video Section > Bandwidth setting.
iChat needs to see a Minimum of 128kbps to do 1-1 chats in Video
For 3 and 4 way chats it needs 384kbps
Set the Bandwidth to 500kbps if it is set lower.
Also check the speed you are getting from your Internet supplier.
9:28 PM Thursday; February 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

CS6 Playback problems with more then 3 Video Layers

I am having problems playing back a project with more then 3 HD video-layers (PIP and MultiCam).
After one second playback of video stops and I can only hear audio.
The same projecet in CS5.5 can be played with 8 !!!! active HD video layers without problems ...
Must have something to do with disk IO - I can play 9 HD streams with multicam if I use the same video on all 9 layers (each with a few frames offset)
I920,18GB RAM,GTX 680,9TB Raid5
regards
michael

Hi Jeff,
I allready deleted the cache and db files - even shift&alt startup didn´t change anything.
yes - MPE is enabled for the new CS6 project ;-)
In CS6 I can playback 9 HD streams with 3way-cc in multicam mode - as long as its the same clip 9 times - each with a few frames offset
as soon as I change the offset for each video to 30sec, playback gets choppy after 1 or 2 seconds and after 2-4 seconds it only shows 1 frame every 1 or 2 seconds (or stopps)
... tested with canon-hdv, canon-dslr and gopro2 material - no difference
Right now I cant even play 2 video streams in CS6 while CS5.5 still works with all 8 layers ....
regards michael

A document with more no of sheets seem to work very slow in pages. How to increase speed of processing

A document with more no of sheets in it seems to work slow. Speed of processing is dull. An error message ( error code 43 ) appeared while working in pages.

Also, try holding down the Command and the R keys
during boot to get into the Recovery HD. From there
select Disk Utility and perform a Repair Pemissions
and a Repair Disk on the OSX install partition.
If that doesn't help, you may want to get some additional
test and/or repair software to check the hard disk and
other hardware. Tech Tool Pro comes to mind, as it
can run tests on various hardware aspects of the system.
Disk Warrior is another program that can test file systems
and look for file corruption. You should be able to get
these programs on line depending on where you are.
This sounds suspiciously like file corruption going on
which can be software caused or a hard disk that is
starting to go bad or just a few sectors that went bad
is some key spots.
Going back to Snow Leopard will not help if there are
are problems with the files or, hopefully not, the hard disk.

Report Bursting with RESTful Web Services SDK

Hi,
We are looking to upgrade to BI 4.x from BI 3.1. We are not sure whether RESTful Web Services SDK is the way to go. We have a requirement where we need to be able to refresh a report, save the whole report content to a specified forma for a team lead/manager, and then section/burst each report to separate files that each is corresponding to the individual employee. In other words, for example, we have a team constent of 1 manager and 4 employees. We want to save one report for the manager with all the content from the 4 employees, and then 4 individual reports that each belong to each employee. We current have a macro code that does this in BI 31 refreshing Deski reports. We want to upgrade to BI 4.X, but the Deski and macro are no longer supported. The macro in BI 3.1 we used to control when to refresh, where to save the reports and update our external datasource that the reports finished refreshing and available for view. We want to keep the same functionality so that it is not a whole redesign of the system when the upgrade happens. Thank you so much for your help. Any sample code, tips and guides are helpful. I am looking to prototype first before I can confirm this will work when upgrading. I have a code snippet in macro (VBA) from BI 3.1 in the attached file for reference if you know of the equivalent.

Hi Raghunath,
Looking at your macro, most of the functionality would be available with REST SDK. With BI 4.x REST is now only SDK which provides APIs to work with webi report. With .NET or Java SDK we could not eeven schedule a webi doc with prompts.
With BI 4.1 REST APIs include.
refresh report, schedule report, save report, export which is done by your macro.
For detailed tasks, such as saving and modifying the report for specific users and send to schedule, you would need to play around with REST Urls to understand the workflow.
For starters take a look at the devleopers guide for REST here:
http://help.sap.com/businessobject/product_guides/sbo41/en/sbo41_webi_restful_ws_en.pdf
Here is the doc which compares the availability of SDK APIs with different BI versions.
http://scn.sap.com/docs/DOC-53285
For any Enterprise level tasks, you could always use .NET or Java enterprise SDk and comibe it with your REST app.
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place

Bug report: apex_item.date_popup2 more then 100 on one page

Description:
When you use function
apex_item.date_popup2
without setting parameter
P_ITEM_ID
, only 100 datepickers can be initialized at the same time on the one page.
Reason:
The reason is in using
LPAD
on some global popup2 counter.
Workaround:
Set mentioned parameter with the value.
For example, in select query of the reports region:
apex_item.date_popup2(1, t.some_date, p_item_id => 'popup2-workaround-'||rownum)
Actual version:
Application Express 4.2.2.00.11 and all below.

Andy,
Apologies for the late reply - Forums have been out for a while :-(
Thanks for the suggestion. I've had a look at Denes' example and
at least now I know it is possible.
I've asked for access to his workspace but have not been given that
yet so can't look at the details yet but I can make some educated
guesses as to how it was done.
I will give it a try.
I'm still not certain whether having 2 updatable tabular reports is the
right way to go though....
Currently I'm working on a page with 2 navigator reports - one for selecting
the object and another to select the start date of the timestamped attributes.
Next to that I have an updatable detail form that shows the selected object
and attributes as one whole set using the joined view I mentioned earlier.
Inserts, updates & deletes are then done in the form.
Ruud.

Transformations with more then one source data structure?

Hi,
is there a best practice to include more then one data source (e.g. DSO, InfoSource, ...) in a transformation?
My approach was to merge the needed sources by creating an InfoSet. Afterwords I took this InfoSet as source for the transformation.
Is this the recommended approach? Are there alternatives to this approach? Pros and cons?
Regards,
Axel

Hi,
as I unterstood a virtual characteristic is computed when you query the data. In our case we'd also like to export the data via open hub instead of only querying it, so the value would stay empty. Is this correct? Works a virtual characteristic with a third party analysis tool like Cognos?
So implementing a custom extractor in R/3 would be the recommendation?
Currently I've implemented the scenario via left outer joins in the InfoSet with an additional abap routine in the transformation to determine the right material number. The big downside of this approach is probably bad performance with big tables, that delta extraction isn't possible from an InfoSet and more data as needed for reporting has to be loaded (lookup tables). Right? The only upside I can see with this solution is that after joining the tables only a few if statements are needed in the ABAP-Routine to do the job.

XML Publisher with more then one VO

Hi;
I have a requirement to show a custom PDF report on click of a button in a custom OAF page. so with the help of [http://apps2fusion.com/at/ps/260-integrating-xml-publisher-and-oa-framework|http://apps2fusion.com/at/ps/260-integrating-xml-publisher-and-oa-framework] I am able to prepare a xml publisher PDF report with single VO(select query) where as in my requirement I required to write more then one VO(select querys). Can anybody give some ideas how to proceed?
GsrC.

hi;
i have multiple viewObject and i did what you said and i generated the XML file
but the problem i have that
the generated xml file was
<Msat>
<MasterVO>
<MasterVORow>
     <BidValidUntil></BidValidUntil>
     <AdvancePayment>5051</AdvancePayment>
     <Duration>99</Duration>
     <PaymentType>%</PaymentType>
     <GroupName></GroupName>
</MasterVORow>
</MasterVO>
*<SupplierNameVO>*
*<SupplierNameVORow>*
*<Segment1></Segment1>*
*<VendorName></VendorName>*
*<VendorId></VendorId>*
*</SupplierNameVORow>*
*</SupplierNameVO>*
</Msat>
but i want to be in this form
<MSat>
<MasterVO>
<MasterVORow>
     <BidValidUntil></BidValidUntil>
     <AdvancePayment>5051</AdvancePayment>
     <Duration>99</Duration>
     <PaymentType>%</PaymentType>
     <GroupName></GroupName>
*<SupplierNameVO>*
*<SupplierNameVORow>*
*<Segment1></Segment1>*
*<VendorName></VendorName>*
*<VendorId></VendorId>*
*</SupplierNameVORow>*
*</SupplierNameVO>* </MasterVORow>
</MasterVO>
</MSat>
how can i do that if each <suuplier>and <master>are from differnt views and when i tried to use XML>appendChild()
it gave me this error message
oracle.xml.parser.v2.XMLDOMException: cannot add a node belonging to a different document
do any one know the solution for this problem
thx

I am facing problem with more then 300 'characters', charactristic def

Hi friends,
Any one help me for this issue.
We receiving data from source (SAP CRM) systems to SAP BW, Characteristic description is more then 300 Characters we want to report this in BEX.
Description of a characteristic from source system to BW will come more then 600 and may be more then 1000 characters it is not fixed.
Our problem is how to pull data into BW?
How to take Report on this pulled data?
Please suggest or give me idea how to resolve this Issue.
Regards
Mohan

Hello Mohan,
check these
Re: Long Text data to upload into BW
check these blogs
/people/sap.user72/blog/2006/05/27/long-texts-in-sap-bw-modeling
/people/sap.user72/blog/2006/06/03/long-texts-in-sap-bw-modeling-150-follow-up
/people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-i
/people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-ii
Best Regards....
Sankar Kumar
+91 98403 47141

MDT Console with more then 15 machines, How to use the same drivers for more machines.

Hello,
I'm am looking for a solution to make our MDT design as effective as possible(as small as posible).
The Situation:
The company has more then 15 different computers added to the MDT console for the automated installation of Windows 7. The installations are done in 2 different ways, 1 with a local USB key installation (with the deployment folder on the USB key) and the other
installation is a network USB key installation (with the deployment folder on the server).
The local USB key exists for offices in parts of the world where the internet connection is poor.
The problem:
We have machines which can use the same driver for different kinds of hardware functions (LAN, WLAN, etc..)
If we add a new machine to the MDT and we don't check the box for "Import drivers even if they are duplicates of an existing driver" we will automatic use the driver which already exists in the deployment folder. If say half a year
later we stop using an older machine which "may" have drivers that are being used for other machines and we delete the machine from MDT we should
NOT check the box "Completely delete these items, even if there are copies in other folders". The problem is that this can also lead to a lot of unused drivers in the deployment folder also because we do not know exactly how many
computers are using a certain driver.
At the moment we have another deployment share with for each machine its own drivers installed (so some drivers will be multiple times in the deployment folder) as you can guess this becomes really big.(deployment folder of more then 24 GB). The advantage
of this is that we can delete a machine from the MDT list without having to worry if the drivers for that machine might be used by other machines. It is now just becoming to big in size(GB).
The Question:
Is there not an option within MDT that checks automatically if the drivers connected to a certain machine in MDT are being used by other machines? In this case we would check the box "Completely delete these items, even if there are copies in other folders"
and MDT would not delete the drivers which are still used for the installations of other computers.
Thanks in advance.
Greets,
Arie

Arie,
I think you are over-complicating this. Basically using drivers that already exist is the way to go. Otherwise drivers will be imported a second, third or fourth time. Which also takes up allot of disk space. If you're concerned about driver management,
then I would suggest to drop your concerns, since there is nothing to less you can do about this particular issue. As long as you don't delete the driver that's been imported earlier by another machine there is nothing to worry.
Ask yourself:
- how long am I going to support model x
- how many times do I want to update drivers
With selection profiles you can easily target which content needs to go where (on your USB drive of-course)
I can imagine that managing 25 shares for 25 different models, just because you 'refuse' to have old drivers in your share, or have removed support for some hardware models, isn't really time and energy efficient too.
If you take a look in your deploymentshare\control folders you will see some XML files. These XML files hold all the entries in your deploymentshare. So your drivers.xml and drivergroups.xml (depending on the number of groups you have) are going to be very
big XML files. These XML files are read by MDT to identify the objects in MDT and under which folder the objects are located.
It's not possible to create or have an dependency between driver files and hardware models, other then creating groups under "Out-of-box Drivers" and using selection profiles.
Another suggestion would be to decrease your number of hardware models drastically. On the other hand, having 25 Gb of offline media isn't really a big deal either. Portable and removable media of those sizes (32 and 64 Gb) isn't that expensive as it used
to be 5 years ago.
Don't get me wrong, I perfectly understand your desire to manage this, but MDT doesn't provide any other way, then the things I have pointed out to you here.
Good luck! :)
If this post is helpful please click "Mark for answer", thanks! Kind regards

Download OBIEE report followed with date of report generation

Hi All,
We have the requirement that whenever the user generates the report and tries downloading, the report should be downloaded into the desired format with name as report name+date of report generation automatically.
May I know if this is feasible rather than user user entering the name?
Thanks Shravan

I know this post is very old, but my answer might hlep in the future.
Check the following link:
http://123obi.com/2011/10/obiee-11g-printable-pdf-in-landscape-format/
Regards,
Kalyan Chukkapalli
http://123obi.com

Report Bursting with more then 1 report (sheet)

Similar Messages

Maybe you are looking for