Report Data on Infospoke

Hi,
we have infospokes extracting data to files on app server.
Now can i create a bex report to report data on 3 app server files created by infospokes.
if yes, how do i do it?
thanks
kar

Hi
I don't think it will be possible to create a bex report on flat files on application server.
why i think so is-
1.How will the query identifies the infoprovider?
2. How does it know what is a char and and what is a key figure?
3. How does the query know the data type of each field?
But you should be able to access the data and display in your required format by writing unix or perl scripts and get the data in the format you want.( here i am not talking about bex reports, but talking about an option to read data from app server)
Regards,
Raghu
Edited by: Raghu tej harish reddy on May 5, 2009 8:16 PM

Similar Messages

  • Getting report data into crm

    Hello guru's
    I have a requirment like when i execute bw report that report data should be called to crm.
    1.Please tell me which functional module to be used or suggest me any procedure.
    2.Tell me how to populate the report data into a table.And can we pull that bw table data into crm z table 
    Help me..
    Thanks
    Venkat

    Hi Venkat,
    For 2 point:
    if you are in release < 3.5 you can use Tcode RSCRM_BAPI to produce a flat file from a query in CSV format.
    if you are already in => 3.5 you can check for APD.
    You can also use Openhub-InfoSpoke to produce flat file to feed other SAP systems.
    Ciao.
    Riccardo.

  • Stock Report Date Wise

    Dear All
            I am devlop new Stock Report Date wise
    my output follows
    Material    Plant   Storagelocaton   Saleorder OPenning stock     Closing Stock     Total
    Which Table stored that details?
    how will calculated?
    Thanks and Regards
    Suresh

    hey
    i think the following tables
    will be helpful for the report:-
    1>MARA
    2>MBEWH
    3>MSEG
    4>VBRP
    hope this will help
    good luck
    harry.

  • Error while creating a new report data source in Sharepoint Document library

    I installed SSRS(sql server 2012 SP1) in my sharepoint 2013 farm(single server installation).
    I have installed SSRS addin for report also. 
    I created a document library and included the report data source content type, report builder report and report builder model content types. On click of any of these content types i get the below error. 
    "new Document requires a Microsoft SharePoint Foundation-compatible application and web browser. To add document to document library, click on the 'Upload' button."
    I am using windows 7 64-bit operation system with Google chrome and IE 8 64 bit.
    Any help would be appreciated. 

    Rakesh, is this an SSRS question?
    This doesn't look like Power View.
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • Getting 401 error while creating a Report Data Source with MOSS 2010 Foundation

    I have setup SQL Server 2008 R2 Reporting Services with SharePoint 2010 Foundation in SharePoint integrated mode. SharePoint Foundation is in machine 1 whereas SQL Server 2008 R2 and SSRS Report Server are in machine 2. While configuring Reporting
    Services - Sharepoint integration, I have used Authentication Mode as "Windows Authentication" (I need to use Kerberos).
    My objective is to setup a Data Connection Library, a Report Model Library, and a Reports Library so that I can upload a Report Data Source, some SMDLs, and a few Reports onto their respective libraries.
    While creating the top level site, "Business Intelligence Center" was not available for template selection since SharePoint Foundation is being used. I therefore selected "Blank Site" as the template.
    While creating a SharePoint Site under the top level site, for template selection I again had to select "Blank Site".
    I then proceeded to create a library for the data connection. Towards this, I created a new document library and selected "Basic page" as the document template. I then went to Library Settings for this newly created library and clicked on
    Advanced Settings. In the Advanced Settings page, for "Allow management of content types?" I selected "Yes". Then I clicked on "Add from existing content types" and selected "Report Data Source". I deleted the existing
    "Document" content type for this library.
    Now I wanted to created a Data Connection in the above Data Connection library. For this when I clicked on "New Document" under "Documents" of "Library Tools" and selected "Report Data Source", I got the error "The
    request failed with HTTP status
    401: Unauthorized.".
    Can anybody tell me why I am getting this error?
    Note: I have created the site and the library using SharePoint Admin account.

    Hi,
    Thank you for your detailed description. According to the description, I noticed that the report server was not part of the
    SharePoint farm. Add the report server to the
    SharePoint farm and see how it works.
    To join a report server to a SharePoint farm, the report server must be installed on a computer that has an instance of a SharePoint product or technology. You can install the report server before or after installing the SharePoint product
    or technology instance.
    More information, see
    http://msdn.microsoft.com/en-us/library/bb283190.aspx
    Thanks.
    Tracy Cai
    TechNet Community Support

  • UCCX 7.0.1SR5 to 8.0 upgrade while also adding LDAP integration for CUCM - what happens to agents and Historical Reporting data?

    Current State:
    •    I have a customer running CUCM 6.1 and UCCX 7.01SR5.  Currently their CUCM is *NOT* LDAP integrated and using local accounts only.  UCCX is AXL integrated to CUCM as usual and is pulling users from CUCM and using CUCM for login validation for CAD.
    •    The local user accounts in CUCM currently match the naming format in active directory (John Smith in CUCM is jsmith and John Smith is jsmith in AD)
    Goal:
    •    Upgrade software versions and migrate to new hardware for UCCX
    •    LDAP integrate the CUCM users
    Desired Future State and Proposed Upgrade Method
    Using the UCCX Pre Upgrade Tool (PUT), backup the current UCCX 7.01 server. 
    Then during a weekend maintenance window……
    •    Upgrade the CUCM cluster from 6.1 to 8.0 in 2 step process
    •    Integrate the CUCM cluster to corporate active directory (LDAP) - sync the same users that were present before, associate with physical phones, select the same ACD/UCCX line under the users settings as before
    •    Then build UCCX 8.0 server on new hardware and stop at the initial setup stage
    •    Restore the data from the UCCX PUT tool
    •    Continue setup per documentation
    At this point does UCCX see these agents as the same as they were before?
    Is the historical reporting data the same with regards to agent John Smith (local CUCM user) from last week and agent John Smith (LDAP imported CUCM user) from this week ?
    I have the feeling that UCCX will see the agents as different almost as if there is a unique identifier that's used in addition to the simple user name.
    We can simplify this question along these lines
    Starting at the beginning with CUCM 6.1 (local users) and UCCX 7.01.  Let's say the customer decided to LDAP integrate the CUCM users and not upgrade any software. 
    If I follow the same steps with re-associating the users to devices and selecting the ACD/UCCX extension, what happens? 
    I would guess that UCCX would see all the users it knew about get deleted (making them inactive agents) and the see a whole group of new agents get created.
    What would historical reporting show in this case?  A set of old agents and a set of new agents treated differently?
    Has anyone run into this before?
    Is my goal possible while keeping the agent configuration and HR data as it was before?

    I was doing some more research looking at the DB schema for UCCX 8.
    Looking at the Resource table in UCCX, it looks like there is primary key that represents each user.
    My question, is this key replicated from CUCM or created locally when the user is imported into UCCX?
    How does UCCX determine if user account jsmith in CUCM, when it’s a local account, is different than user account jsmith in CUCM that is LDAP imported?
    Would it be possible (with TAC's help most likely) to edit this field back to the previous values so that AQM and historical reporting would think the user accounts are the same?
    Database table name: Resource
    The Unified CCX system creates a new record in the Resource table when the Unified CCX system retrieves agent information from the Unified CM.
    A Resource record contains information about the resource (agent). One such record exists for each active and inactive resource. When a resource is deleted, the old record is flagged as inactive; when a resource is updated, a new record is created and the old one is flagged as inactive.

  • Multiple data sets: a common global dataset and per/report data sets

    Is there a way to have a common dataset included in an actual report data set?
    Case:
    For one project I have about 70 different letters, each letter being a report in Bi Publisher, each one of them having its own dataset(s).
    However all of these letters share a common standardized reference block (e.g. the user, his email address, his phone number, etc), this common reference block comes from a common dataset.
    The layout of the reference block is done by including a sub-llayout (rtf-file).
    The SQL query for getting the dataset of the reference block is always the same, and, for now, is included in each of the 70 reports.
    Ths makes maintenance of this reference block very hard, because each of the 70 reports must be adapted when changes to the reference block/dataset are made.
    Is there a better way to handle this? Can I include a shared dataset that I would define and maintain only once, in each single report definition?

    Hi,
    The use of the subtemplate for the centrally managed layout, is ok.
    However I would like to be able to do the same thing for the datasets in the reports:
    one centrally managed data set (definition) for the common dataset, which is dynamic!, and in our case, a rather complex query
    and
    datasets defined on a per report basis
    It would be nice if we could do a kind of 'include dataset from another report' when defining the datasets for a report.
    Of course, this included dataset is executed within each individual report.
    This possibility would make the maintenance of this one central query easier than when we have to maintain this query in each of the 70 reports over and over again.

  • Loading complex report data into a direct update DSO using APD

    Dear All,
    Recently, I had a requirement to download the report data into a direct update DSO using an APD. I was able to perform this easily when the report was simple i.e it has few rows and columns. But I faced problems If the report is a complex one. Summing up, I would like to know how to handle the scenarios in each of the following cases:
    1.   How should I decide the key fields and data fields of the direct update DSO ? Is it that the elements in ROWS will go to the
          key fields of DSO and the remaining to the data fields? Correct me.
    2.   What if the report contains the Restricted KFs and Calculated KFs? Do I have to create separate infoobjects in the BI
          system and then include these in the DSO data fields to accommodate the extracted data ?
    3.   How do I handle the Free Characteristics and Filters ?
    4.  Moreover, I observed that if the report contains selection screen variables, then I need to create variants in the report and
         use that variant in the APD. So, if I have 10 sets of users executing the same report with different selection conditions, then
         shall I need to create 10 different variants and pass those into 10 different APDs, all created for the same report ?
    I would appreciate if someone can answer my questions clearly.
    Regards,
    D. Srinivas Rao

    Hi ,
    PFB the answers.
    1. How should I decide the key fields and data fields of the direct update DSO ? Is it that the elements in ROWS will go to the
    key fields of DSO and the remaining to the data fields? Correct me.
    --- Yes , you can use the elements in the ROWS in the Key fields,  but in case you get two records with same value in the ROWS element the data load will fail. So you basically need to have one value that would be different for each record.
    2. What if the report contains the Restricted KFs and Calculated KFs? Do I have to create separate infoobjects in the BI
    system and then include these in the DSO data fields to accommodate the extracted data ?
    Yes you would need to create new Infoobjects for the CKF's and RKF's in the Report and include them in your DSO.
    3. How do I handle the Free Characteristics and Filters ?
    The default filters work in the same way as when you yourself execute the reoprt. But you cannot use the Free characterisitics in the APD. only the ROWS and cloumns element which are in default layout can be used.
    4. Moreover, I observed that if the report contains selection screen variables, then I need to create variants in the report and
    use that variant in the APD. So, if I have 10 sets of users executing the same report with different selection conditions, then
    shall I need to create 10 different variants and pass those into 10 different APDs, all created for the same report ?
    --- Yes you would need to create 10 different APD's. Its very simple to create, you can copy an APD. but it would be for sure a maintance issue. you would have to maintain 10 APD's.
    Please revert in case of any further queries.

  • PowerPivot report data refresh error Data source as SharePoint list Data Feed

    Hi All,
    I am facing a problem on auto refresh, the report data source is SharePoint list Data Feed, I saved it my PC desktop when I set up auto fresh it fails then I moved the SharePoint list data feed "atomsvc" file to A SharePoint Data feed library then connected
    to report started a manual refresh it was success, after next schedules it failed.
    Error massage:
    Errors in the high-level relational engine. The following exception occurred while the managed IDbConnection interface was being used: 
    The network path was not found. ;The network path was not found. The network path was not found. . 
    A connection could not be made to the data source with the DataSourceID of '82f49f39-45aa-4d61-a15c-90ebbc5656d', 
    Name of 'DataFeed testingreport'. An error occurred while processing the 'Testing Report' table. The operation has been cancelled.  
    Thank you very much !
    erkindunya

    If you are using Claims Auth then this is a known limitation.  Auto refresh only works under Classic Auth.
    I trust that answers your question...
    Thanks
    C
    http://www.cjvandyk.com/blog |
    LinkedIn | Facebook |
    Twitter | Quix Utilities for SharePoint |
    Codeplex

  • Report data binding error

    I have created a banded report split into departments. Each
    recore has a value associated with it. The report runs fine if I
    dont try to sub-total each departments vale, but if I add a
    calculated field to the banding, I get the following error:
    Report data binding error Error evaluating expression :
    textField_2 Source text : calc.Department_Total.
    Variable calc.Department_Total is undefined.
    The calculated field is simply the sum of the values, with an
    initial value of 0 and set to reset when the group changes on the
    department. I am using the same data type for the calc field as it
    automatically gave for the original Value field (Big Decimal)
    Any ideas?
    Dave H

    Does anyone have any ideas about this, Its getting a bit
    critical now. Has anyone else been able to do sums that calculate
    on group changes?? The sum total works for the report, jusyt not
    the bands. I desparate here, pulling my hair out.
    Regards
    Dave H

  • Xcelsius - Crystal Report Data Consumer connection Issues

    Sorry for the long post but i hope with the full explaination, i can get a quick answer & solution.
    Using Crystal Reports 2008 and Xcelsius 2008 Engage, SQL 2008 stored procedure.
    I have tested the Crystal Reports Data Consumer connection within the Xcelsius program, using the following steps :
    1. Create a stored procedure that returns the Continent Name and the Count of Projects within each Continent.
    2. Create a Crystal Report using the stored procedure, 2 columns in the Details section, column names in the Page Header section.
    3. Save and export this as an Excel spreadsheet.
    4. Open the Xcelsius program, new file and import spreadsheet. Column A is the Continent Name, Column B is the Count.
    5. Without altering the spreadsheet, I created a graph using the data imbedded. i.Bar Graph, series and row selections. Ii. Pie chart with row data selection. Iii.Column data as series and row selections.
    6. Created a Crystal Report Data Consumer connection using the data imbedded within then spreadsheet. The column A as the u201CRow Headersu201D & column B as the u201CDatau201D. Took quite a while to get the right combination of selected components so that the preview actually showed the data and the corresponding data labels. The Legend still hasnu2019t shown up.
    7. Save and Export as Flash (swf) file.
    8. Close Xcelsius and open Crystal Reports.
    9. Open the same report used to create the spreadsheet and Insert -> Flash, choosing the newly created swf file.
    10. Link the data displayed On the Crystal Report to the Flash file now embedded, using the Flash Expert. Have tried both with the data listed on the Report, and the data listed as the result of the stored procedure.
    11. Previewed and the Data shown on the Graph does match the data listed within the Details section of the Report.
    12. I then altered the stored procedure to add u201C1u201D to all counts, and refreshed the Crystal Report. (I cannot add new data to the underlying database/tables, due to various other folks & projects using that same database.)
    13. The listed data does change to match the changes within the procedure.
    14. The Data labels on the Graph do change to match the changes within the procedure.
    15. The Actual Displayed Data within the Graph Does Not change to match the changes within the procedure.
    I have attempted this with a pie chart, a bar and column charts with the same affect.
    I have searched the web, printed out 4 different examples on how to make this work and still it is hit or miss. I still can not get the legend to show up, either in the preview or the within the Crystal Reports. When I preview the graph before adding the Crystal Report Data Consumer connections, it does work.
    Please someone tell me, What am I missing here ? 
    Thanks in advance for your help.

    http://www.****************/Tutorials/BI/Xcelsius/Index.htm
    http://www.resultdata.com/Company/News/Newsletter/2008/aug/Articles/Xcelsius/Using%20the%20Xcelsius%20Crystal%20Report%20Data%20Consumer.htm
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10161e25-c158-2c10-3086-ad502098b36b?QuickLink=index&overridelayout=true
    http://codesforprogrammers.blogspot.com/search/label/How%20to%20suppress%20blank%20row(s)%20in%20detail%20section%20of%20the%20report%3F
    http://www.businessobjects.com/pdf/product/catalog/crystalreports/cr_xc_integration.pdf

  • SAP Crystal Reports data source connection problem using sap business one

    Hi,
    I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
    I am trying to create a Crystal report but when I try to configure a new connection it does not work.
    I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
    Our Current SAP related software details are as follows:
    OS: Windows Server 2008
    SAP B1 Version: SAP B1 9 (902001) Patch 9
    SAP Crystal Report Version: 14.0.4.738 RTM
    Database: MS SQL Server 2008 R2
    I have also added some screenshots of the issues.
    Please have a look and let me know if you have any questions or any further clarifications.
    I m eagerly waiting for a quick and positive reply.

    Hi,
    There is problem with SAP Business One date source.
    I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
    So, try to use OLEDB.
    Regards,
    Amrut Sabnis.

  • Tax Reporting Date for Cz Republic in report S_ALR_87012357/RFUMSV00

    Hi All,
    We activated Tax reporting date as per SAP Note 1023317. However we are not able to see in the report "S_ALR_87012357 / RFUMSV00" tax reporting date column which should show which document has which date assigned to it. I executed the report with tax reporting date.
    Please help me to find out how to get the column in this report.
    Regards,
    Abishek

    hi Giovanni Baumann  .,
             will u please tell me how u added NAME1 field to on the output list Layout on the report . please guide me on this.
    Regards.,
    S.Sivakumar

  • Report date 2007.10.31 is invalid for this report(S_ALR_87011963)

    Hi,
       We checked 2007/10 Asset balance via report(S_ALR_87011963). We get the following error. Could you pls let me know why we can't run 2007/10 Asset balance?Thanks.
    =======================
    Report date 2007.10.31 is invalid for this report
    Message no. AU 116
    Diagnosis
    You can only run reports for closed or future fiscal years using a report date on the last day of a fiscal year.
    Procedure
    Correct the report date as necessary.
    The last day of the fiscal year in company code 0360, in which the report date lies, is 2007.12.31.
    ========================
    best regards
    Park Han

    Hi Park
    Assets reports can be run as at month-end date (not any date). Therefore check whether 31.10.07 is the month-end date for Oct.
    Regards
    NW

  • How to embedded oracle report data in email body from forms?

    Hi,
    I am working on oracle forms and report 10g and i am new to this. I want to knw How to embedded oracle report data in email body ?
    Regards
    Shruti

    I have uploaded a sample . This might help
    http://www.alexyscorp.com/send_report_email.zip

Maybe you are looking for