Report - Date wise Actual Expenditure, Committment, Available Budget
Hi Experts,
We have SAP PS in place. We are using the same for our Internal Investment Projects. We allocate budget as an " Overall " value & not for a specific " Period ".
Our Management wants a report which should give an information as per details given below.
Requirement - On a given date (Example 31.08.2010) system should able to give data on " Actual Overall Expenditure till the given date ", " Committment till the given date " & " Available Overall Budget till the given date ".
In report S_ALR_87013558, sytem gives the above values only if Budget is allocated as " Year wise/Period wise" & not if allotted as an " Overall Values " to the project.
Does any body has got an idea about any such report available in the system or do we need to develop this report?
Thanks in anticipation.
Warm Regards
Ashok
S_ALR_87013558 also gives Overall budget, all you have to do is scroll the horizontal bar and see each and every column or otherwise see the column display settings whether it has been selected or not.
Also, S_ALR_87013558 report will not give details upto a specific date. It gives details upto current date(the date on which the reprot is executed)
One more thing, Budget can be either overall or fiscal year wise. There is no period wise budget.
To my knowledge, only line items reports can be run for a specific date, but in all other Std. reports you can go to the details of period level not at date level. If at all you want a report at date level, then you will have to develop it,
Edited by: Ahmed Rifaee on Sep 22, 2010 1:10 PM
Similar Messages
-
Dear All
I am devlop new Stock Report Date wise
my output follows
Material Plant Storagelocaton Saleorder OPenning stock Closing Stock Total
Which Table stored that details?
how will calculated?
Thanks and Regards
Sureshhey
i think the following tables
will be helpful for the report:-
1>MARA
2>MBEWH
3>MSEG
4>VBRP
hope this will help
good luck
harry. -
Requirement of General Ledger Trial Balance Detail Report Date wise
Thanks for your reply
We have to requirement of General Ledger Trial Balance Detail Report Date wise.
Please help for that.
Thanks.Take sum(Accounted_dr) - Sum(Accounted_Cr) till the Accounting Date..... from GL_BALANCES
Edited by: 924750 on Sep 16, 2012 3:42 AM -
Can we access report date wise?
hi all
can we access report date wise if yes then plz guide me?
i made two text items,one for start date and second one for end date in form.if i issue date in these two text items like this
start date: 01/08/2009 End date: 08/08/2009 and after pressing the when_button_pressed and it give me the report up to giving date,is it possible?
plz help me and guide me more
thanks in advance
sarahhi sir
sir i got an error in the following code
SET_REPORT_OBJECT_PROPERTY(rep, REPORT_OTHER , 'P_START="' || TO_CHAR(:BLOCK.START_DATE, 'DD.MM.YYYY') || '" P_END="'|| TO_CHAR(:BLOCK.END_DATE, 'DD.MM.YYYY') || '"');
here is the error:" to many declaration of 'To_char' match this call"
my table name is date1
and table structure is
name
address
start_date
end_date
and i used this where query WHERE COLUMN BETWEEN TO_DATE(:P_START, 'DD.MM.YYYY') AND TO_DATE(:P_END, 'DD.MM.YYYY') in the form where caluse
i am using u r codes for displaying report which one you posted yesterday
sarah -
sir,
actually i want daily cost of finish goods within that seperate the completed qty cost & rejected qty cost
& also the raw material cost which i issue for that finish good.date wise.Hi
please check the link :
Re: Date Wise Production Report
Regards -
Dear Friends,
This is with regard to GL account wise balance/trial balance report based on dates (From...To format).
We have tried all standard GL reports especially account balances and trial balance reports and all reports are showing period wise reports eventhough we put posting dates in the dynamic selection screen.
We also checked in SAP Notes and Expert Forum and none of the details are matching with our requirement.
As we are in production client (in ECC 6.0 version) and doing year end procedure, it would be helpful if you could let me know whether there is any transaction code/report/program available in SAP to meet the
above requirement.
Regards,
Dwarak.Hi Dwarak,
All reports balance report are based on posting period. This information is stored in a total table by posting period. These reports are not looking to the posting documents.
When you have BW or special ledger you can create a table with day totals
Paul -
Data for Actual/ Plan Cost and Budget
Hi All,
Can you please adviseme which content i need to activate to get the Actaul, Plan cost and the Budget Data in SAP BW.
Do i need to exploer CCA cubes or Fund managment Cubes.. Please let me know... I need to know the Tables in R/3 Side for budget data to make sure that in R/3 we have budget data..
Please let me know.
Thank you
SAPHi there,
For those check in here:
[http://help.sap.com/saphelp_bw33/helpdata/en/d3/561be24e8c11d596f30000e835339d/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/60/0f07d3532c864aab7ec5f113146da2/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/26/d0cccc8d98c344925915ec81d5a421/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/43/de43fcf6e2154bbbbcecbc63cdf287/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/23/d5cf85683c3348b2189199e49a35cf/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/ad/be383fd98d1201e10000000a114084/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/1a/8c42588afe11d496d80000e835339d/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/d3/29ae399c1a6651e10000000a114084/frameset.htm]
Hope this helps.
Diogo. -
Hi Experts,
We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
From Mb5b we canot get storage location wise report as we get only plant level qty and value.
Pl. guide us.
Regards,
YusufHi Yusuf,
Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
stock, value. if you double click the article you will get the details of storage location.
Hope it will be help for you
Regards
GK -
Stock movement report date and warehouse wise
I need this report date wise and warehouse wise...
please help ..
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @Whse nvarchar(10)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
select @Whse = Max(s2.Warehouse) from dbo.OINM S2 Where S2.Warehouse = '[%2]'
Select @Whse as 'Warehouse',
a.Itemcode,
max(a.Dscription) as ItemName,
sum(a.OpeningBalance) as OpeningBalance,
sum(a.INq) as 'IN',
sum(a.OUT) as OUT,
((sum(a.OpeningBalance) + sum(a.INq)) - Sum(a.OUT)) as Closing
--(Select i.InvntryUom from OITM i where i.ItemCode=a.Itemcode) as UOM
from( Select N1.Warehouse,
N1.Itemcode,
N1.Dscription,
(sum(N1.inqty)-sum(n1.outqty))as OpeningBalance, 0 as INq, 0 as OUT From dbo.OINM N1
Where N1.DocDate < @FromDate and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,
N1.Dscription Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance,
sum(N1.inqty) , 0 as OUT From dbo.OINM N1 Where N1.DocDate >= @FromDate and N1.DocDate <= @ToDate
and N1.Inqty >0 and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription
Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance, 0 , sum(N1.outqty) as OUT
From dbo.OINM N1 Where N1.DocDate >= @FromDate and N1.DocDate <=@ToDate and N1.OutQty > 0
and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription) a, dbo.OITM I1
where a.ItemCode=I1.ItemCode
Group By a.Itemcode Having sum(a.OpeningBalance) + sum(a.INq) + sum(a.OUT) > 0 Order By a.Itemcodeplease advice.. - wrong out put.
Declare @FromDate Datetime
Declare @ToDate Datetime
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
select
a.Itemcode, a.warehouse,a.price as 'Item Cost',
max(a.Dscription) as ItemName,
sum(a.OpeningBalance) as OpeningBalance,((sum(a.OpeningBalance) *a.Price)) as 'Opening STock Value',
sum(a.INq) as 'IN',
sum(a.INq)*a.Price as 'IN Stock Value',
sum(a.OUT) as OUT,
sum(a.OUT)*a.Price as 'OUT Stock Value',
((sum(a.OpeningBalance) + sum(a.INq)) - Sum(a.OUT)) as Closing,
((sum(a.OpeningBalance) + sum(a.INq)) - Sum(a.OUT))*a.Price as 'Closing Stock Value'
--(Select i.InvntryUom from OITM i where i.ItemCode=a.Itemcode) as UOM
from( Select N1.Warehouse,
N1.Itemcode,
N1.Dscription,n1.Price,
(sum(N1.inqty)-sum(n1.outqty))as OpeningBalance, 0 as INq, 0 as OUT From dbo.OINM N1
Where N1.DocDate < @FromDate Group By N1.Warehouse,N1.ItemCode,n1.Price,
N1.Dscription
Union All
select N1.Warehouse, N1.Itemcode, N1.Dscription,n1.Price, 0 as OpeningBalance,
sum(N1.inqty) , 0 as OUT From dbo.OINM N1 Where N1.DocDate >= @FromDate and N1.DocDate <= @ToDate
and N1.Inqty >0 Group By N1.Warehouse,N1.ItemCode,N1.Dscription,n1.Price
Union All
select N1.Warehouse, N1.Itemcode,N1.Dscription,n1.Price, 0 as OpeningBalance, 0 , sum(N1.outqty) as OUT
From dbo.OINM N1 Where N1.DocDate >= @FromDate and N1.DocDate <=@ToDate and N1.OutQty > 0
Group By N1.Warehouse,N1.ItemCode,N1.Dscription,n1.Price) a, dbo.OITM I1
where a.ItemCode=I1.ItemCode
Group By a.Itemcode,a.warehouse,a.Price
Having sum(a.OpeningBalance) + sum(a.INq) + sum(a.OUT) > 0 Order By a.Itemcode -
MB5B Report for Date Wise Stock and Value
Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated StockHi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick -
Dear Experts,
As per my knowledge we can generate the KE30 Report by Period and Year leve. But my client requires to generate the COPA KE30 Report by date-wise. I had checked the all characteristics, I didn't found the Date Charactereistic.
How can I acheive this requirement?
Thanks in advance,
Regards,
Balaji Bhonsle..Hi Balaji,
there are two kinds of reports in KE30: segment-level based reports and line-item based reports.
Posting date is available only in line-item based reports.
Line-item based reports are created in TC KE91, the forms used by them in KE94 (vs. KE31 and KE43 for segment-level reports)
Line-item based reports will run slowly, as they read all individual line-items
regards
Nikolas -
One report to check status of project/wbs(TECO/REL)+ available budget
Dear All,
Please advice. Is there any report (one for all ) which can show Status of project/wbs + available budget of a project. I tried cns43, cn41 and report s_alr. But it shows in different tcode/report. Hopefully there is a standard report that can show these in one report.
Many thanks in advance.
NiesCN41 shows the Current Budget and not Original Budget.
If Available Budget in your terms means difference between Current Budget and Actual, you can include a column 'Difference' from menu.
Select the Column Budget 1st, Menu Edit>Comparison> Choose Actual Cost.
The output shows the difference and percentage. Problem now is you can't view the status.I can't think of anything standard which exactly gives the ouput columns you are expecting.
Regards
Sreenivas -
Incorrect values in available budget in report S_KI4_38000050
Dear Experts,
We are getting incorrect values in available budget column against Fun/Fund center -commitment item in report S_KI4_38000050.
Actually we have posted entries against fund center/commitment item without releasing budget and it allowed post entries due to deactivated availability control.
Before Posting FI entry:
Release Budget=0
Assigned=0
Available=0
Commitment=0
After Posting entry of Rs. 5000
Release=0
Assigned= -5000
Available=5000
Commitment= -5000
Ques-1 Why available is 5000?
Now if I released some amount say 10000 then,
Release=10000
Assigned= -5000
Available=15000
Commitment= -5000
Ques-2 How to correct values mentioned above?
As I think, the correct values should be:
Release=10000
Assigned= 5000
Available=5000
Commitment= 5000
Regards
ShishirExperts...Waiting for your suggestions..
-
MB5B Report table for Open and Closing stock on date wise
Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan MHi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber -
Hi all Experts,
I am at client site and hav to provide a report containing opening, and closing stock (and issue qty if possible) storage location wise and date option wise.pls help
regards
vikas chhabraHi,
Use MB51 for date wise report
OR
Use MCL1, MCL5, MCL9, MCLD (If Warehouse Management you are using)
OR
You have to develop an own ABAP report.
Regards,
Biju K
Maybe you are looking for
-
A better way to syncronize objects in servlets
Hi, I am working on a webapp that has a servlet that invoque a instance of a object that accesses our sybase server. What is the best secure way to syncronize to avoid problems at the database? I have searched all of these but I am still confused: Sy
-
Selection Screen in 3.0F
Hi Guys, I am trying to activate and deactivate some parameters on selection screen by clicking Radiobutton of selection-screen in SAP 3.0F. I tried USER-COMMAND but it is not allowing me to do in 3.0F version. Please let me know there is any other w
-
Hi, I have a HP pavilion dv7-3135eo with a corrupt BIOS. I get the 2 flashing LEDs on the CAPS LOCK. This leaves me unable to do anything with the machine as it won't start at all. The solution to this problem (LED Codes) is to "Restore BIOS from on
-
Reg. Extracting DML/ DDL Stmnts.
hi , I dont have access to Db . So I apologise straight away for not trying out the code myself to interpret and scrutinise. The code is to extract DML / DDL stmnts from all_procedures. and I have tried a sample (select stmnt) of it . Please let me k
-
Web Dynpro question, need direction!
I need to design an application or webpage that will run from a link in an e-mail, and that will pull, display, and send some SAP R3 portal content. I've been playing with Netweaver Developers Studio / Web Dynpro, and have made a basic application/pa