Report empty

Hi,
I'm not receiving the DisplayReport Event and
after receiving the EndExecution Event the Execution.Report is empty. What could be wrong?
I'm using C# .Net 2005 and TestStand 3.5

Hi,
Seeing you have the third parameters as a NULL, this means you are not using the Process Model entry points therefore you will not have a report generated.
If you need a report, then you will need to pass a reference to the process model sequence file in the third parameter and in the second parameter you need to pass a string containing the name of the Entry Point eg "Test UUTs" or "Single Pass".
I hope this helps.
Regards
Ray Farmer
Regards
Ray Farmer

Similar Messages

Report - empty value problem (-)

Hey
When I have me report, I have a few fields who are empty but displayed with a '-'.
Is there any way I could remove this?
I'm asking because in the report is a link that passes back 3 values together, if one is empty i have a '-' that is passed back.
Thanks in advance.
OLI

You can set the null display value In your report attributes. Look in the "Layout and Pagination" section for "Show Null Values As".

Reports empty SCSM 2012 SP1

Hello
i have integrated the component of datawahrehouse SCSM 2012 with my management server.
But when i try to generate a report of list of inccident for example , it display me an empty report , i have tried to change some parameter (date , timezone ....) but no result !!!!
prince

Hello ,
I have tried to process all the jobs manualy but no result !!!!!
i cannot found the the
DWMaintenance job !!!!!!
the some things when i try the powershell script (Windows 2012)
in the event log of my data warehouse server i found this error :
ETL Module Execution failed:
ETL process type: Extract
Batch ID: 255
Module name: Extract_System.ExtensionType_GEISER
Message: L'ID '1033' des paramètres régionaux de la colonne source 'DisplayName' ne correspond pas à l'ID '1036' des paramètres régionaux de la colonne de destination 'System.Entity!DisplayName'.
Stack: à System.Data.SqlClient.SqlBulkCopy.AnalyzeTargetAndCreateUpdateBulkCommand(BulkCopySimpleResultSet internalResults)
à System.Data.SqlClient.SqlBulkCopy.WriteToServerInternalRestContinuedAsync(BulkCopySimpleResultSet internalResults, CancellationToken cts, TaskCompletionSource`1 source)
à System.Data.SqlClient.SqlBulkCopy.WriteToServerInternalRestAsync(CancellationToken cts, TaskCompletionSource`1 source)
à System.Data.SqlClient.SqlBulkCopy.WriteToServerInternalAsync(CancellationToken ctoken)
à System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServerAsync(Int32 columnCount, CancellationToken ctoken)
à System.Data.SqlClient.SqlBulkCopy.WriteToServer(IDataReader reader)
à Microsoft.SystemCenter.Warehouse.Utility.SqlBulkOperation.Insert(String sourceConnStrg, String sourceQuery, String destinationTable, Dictionary`2 mapping, String sqlConnectionStrg, Boolean& readerHasRows, DomainUser sourceSecureUser, DomainUser
destSecureUser)
à Microsoft.SystemCenter.Warehouse.Etl.ADOInterface.Insert(DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
à Microsoft.SystemCenter.Warehouse.Etl.ADOInterface.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
à Microsoft.SystemCenter.Warehouse.Etl.ExtractModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser, Int32 batchSize)
à Microsoft.SystemCenter.Warehouse.Etl.ExtractModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
à Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object completionState)
i think that this error appear when my management server try to sychronize and extract the data with the the data warehouse server .
prince

Seeing part of data in report (empty fields)

Hi All,
I am trying to create a report in BI Publisher. I've set the Data Model and a layout (.rtf file). When creating (Publisher Desktop) the rtf file, I've tested the file with an .xml (data) file and it shows all the data in the preview; it works fine.
However, running this Report in the View mode in the BI Publisher Enterprise, I only get to see part of the data (1 of the 4 columns with data, the rest is empty).
Does anyone have any ideas how this could be possible, or does anyone has any experience with this?
Hope this is enough info, but please let me know if you need more info.
Thanks in advance.

Hi,
Thanks for the answer. I'll answer your questions and clarify a bit more.
Yes, there is data in the database, so, since the report is based on a query, the fields should not be null.
When in Edit mode, I can create an XML file, I get data in all fields. Somehow when in View mode, the XML seems to be empty, but for 1 field.
Example:
My SQL Query:
select     ORDERS.ORDER_ID as ORDER_ID,
     ORDERS.ORDER_DATE as ORDER_DATE,
     ORDERS.ORDER_STATUS as ORDER_STATUS,
     ORDERS.ORDER_TOTAL as ORDER_TOTAL,
     ORDERS.SALES_REP_ID as SALES_REP_ID,
     EMPLOYEES.EMPLOYEE_ID as EMPLOYEE_ID,
     EMPLOYEES.FIRST_NAME as FIRST_NAME,
     EMPLOYEES.LAST_NAME as LAST_NAME,
     EMPLOYEES.SALARY as SALARY
from     OE.EMPLOYEES EMPLOYEES,
     OE.ORDERS ORDERS
where ORDERS.SALES_REP_ID=EMPLOYEES.EMPLOYEE_ID
When executing this against the DB I get:
ORDER_ID ORDER_DATE ORDER_STATUS ORDER_TOTAL SALES_REP_ID EMPLOYEE_ID FIRST_NAME LAST_NAME SALARY
2453 05-10-99 06:53:34,362632000 0 129 153 153 Christopher Olsen 8000
2424 21-11-99 20:22:33,263332000 4 13824 153 153 Christopher Olsen 8000
2422 17-12-99 06:19:55,462332000 2 11188,5 153 153 Christopher Olsen 8000
So, data exists.
Now, (even) when I Auto-Generate a Layout Report, save all and go to View, I only get the ORDER_ID in the report. All other data is not there.
When I select/view: Template = AutoGenerated and Output type = Data, I get the following data:
<?xml version="1.0" encoding="UTF-8" ?>
- <ROWSET>
- <ROW>
<ORDER_ID>2453</ORDER_ID>
</ROW>
- <ROW>
<ORDER_ID>2424</ORDER_ID>
</ROW>
Further, in the template the code looks like:
<?for-each:ROW?>
<?ORDER_ID?>
<?ORDER_DATE?>
<?ORDER_STATUS?>
<?end for-each?>
So, it looks like data is in DB, but not in XML. While the report is set up correct to receive data, it's not 'mapped' by the XML.
Hope this helps you, helping me.
Thanks!
Edited by: user11084662 on Oct 9, 2009 7:00 AM.
Layout of the message.

Photosmart 7520 reports empty USB thumb drive is full

Every time I attempt to perform a scan to USB drive on my Photosmart 7520, it reports a failure because "the USB drive is full." This is despite freshly formatting it to FAT32 and verifying the drive is empty.

Hi erikjwaxx,
Welcome to the HP Forums! I understand that your HP Photosmart 7520 reports the empty USB thumb drive is full. I am happy to help you with this issue! I have a few questions for you:
What size is the USB thumb drive?
Have you tried another USB thumb drive?
Is the printer power cable plugged directly into the wall outlet or surge protector? Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Hope to hear from you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

ACS Reports empty

Hello All,
I've got a SCOM 2012 SP1 setup with 3 servers:
1 SQL, 1 RMS, 1 ACS Collector server.
I've got 14 forwarders setup to forward to the collector.
The issue we are currently facing is that whenever we run the ACS reports, no data is returned..
When I check the SCOM Console under the Audit Collection Server node for the health of the collector and forwarders, then I don't see any errors.
Both the collector and forwarders are healthy.
Using AdtAdmin I ran the query to get the stats, there I can see that the forwarders are definitely sending data to the collector.
I've also checked the database and in the dtEvent tables, I can see that data is in there.
When checking the dtEventData tables, they are empty.. IS this supposed to be, or should data be in there?
Here is the link to the export of the adtadmin /stats command:
http://sdrv.ms/1c0JPJB
The connection to the database is set using SQL authentication using the SA account.
So authentication should be an issue..
Does anybody have an idea what could be causing the reports to be empty?
Many thanks in advance!
Filip

Hi,
please take a look here for some scripts:
http://technet.microsoft.com/en-us/library/cc974475.aspx
To check grooming settings, Specifically towards the bottom
To view the setting, type SELECT * FROM dtConfig. This opens the Results pane
below the Query pane.
Look at the value in the sixth row; it should now equal the value you entered for <number of days to retain data + 1>.
Have you definitely actually got data in the test environment?
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Reports empty

Im having a few issues with my Lync 2010 montoring server.
Basically, none of the Media Quality Diagnostic Reports are working and I desperatly need to find out some information on some call quality issues we are having.
Some of the other reports are fine (such as the peer to peer report and the dashboard seems ok).
Any ideas? Sorry its a bit vague but im by no means a SQL or Reporting services guy.

Hi MessageUndeliverable,
Please try the followings:
1. Run Get-CsQoEConfiguration
cmdlet to check if the value of parameter EnableQoE is set to True .
2. Try to reinstall the monitoring Database.
(Note: You will lost all the data in the DB.)
Install-CSDatabase -ConfiguredDatabases -DatabaseType monitoring -sqlserverfqdn xxx –clean
And there's an old case for your reference,
https://social.technet.microsoft.com/Forums/lync/en-US/5cbe3f5b-a421-42ae-93c3-22ea4846e0cd/lync-monitoring-media-quality-diagnostics-reports-are-empty?forum=lyncdeploy
Hope it can be helpful.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

NetApp plugin for OEM 12c - DB is not on NFS mounted storage. DB Storage Perf Report empty

Hi, I have installed NetApp Plugin for OEM 12c (12.1.0.3.1) for a Netapp vFiler used for SMO. "Database Storage Utilization" and "Consolidation Database Storage Performance" empty. "Database is not on NFS mounted storage. Hence, no views available." - a. We are using ASM lun created on NFS. Does this means it will not appear in the plugin report ? - b. If point a. is true, is there a way to make the data appear ? I had already verified the BELOW. Only for point 4, I observed MGMT$DB_DATAFILES."OS_STORAGE_ENTITY" is NA (even though the ASM disk is actually on a NFS mount) : 1. Database discovery is done in EM12c . 2. Go to the database “HOST” target in EM 12c and click on the host target on which database resides. From host target drop down, click on “Host-> StorageDetails”. It will launch the “Storage Details” page. Please refer attached screenshot. There is a table displayed on bottom of screen and click on “File Systems” tab and check that your discovered database storage mount point is shown there. (Please note that whenever you define new mount point on host, this list should reflect the change.), otherwise, Database Performance views will not work. This mount point discovery is updated periodically. (It might be possible that DB views are not working because this discovery might not have finished) 3. Please click on NetApp Storage Target type and go to “Target HomePage drop down ->All Metrics”. Please click on “Volume List” metric and confirm if the volume is listed there on which database resides. 4. If all above steps holds good, please execute the below query on EM 12c repository and send the result: SELECT V2.TARGET_NAME, V1.FILESYSTEM, SUBSTR(V1.FILESYSTEM,INSTR(V1.FILESYSTEM,':')+6, (CASE WHEN (INSTR(V1.FILESYSTEM,'/',1,3) > 0) THEN INSTR(V1.FILESYSTEM,'/',1,3) - INSTR(V1.FILESYSTEM,'/',1,2) - 1 ELSE 100 END)) "VOLUMENAME" FROM MGMT$STORAGE_REPORT_NFS V1, MGMT$DB_DATAFILES V2 WHERE V1.MOUNTPOINT = V2.OS_STORAGE_ENTITY and V2.TARGET_NAME=''

Hi Aik, Change in SQLs will not work. There is lot of code for data discovery.We need to have discovery mechanism integrated in our plug-in for ASM LUNS.ASM LUN based database discovery has been planned to support in future release of plug-ins. Can you please share following details about OEM plug-in usage:1. Company Name2. ONTAP OS (cDOT / 7-mode which version)3. Nature of Databases (Only ASM or NFS based)4. Are your currently using this plug-in for NFS databases? If yes, how it helps to simplify your database administration. We will share your feedback to Product Management for support of ASM. Regards,Sachin Maheshwari

Software metering reports empty

I have a question:
I want to enable Software Metering so i can use our reporting service to create a report how many times an application is started. Only every software metering report is empty. Any ideas?
I did the following in SCCM2012 some days ago:
- enabled Software Metering \Administration\Overview\Client Settings (Scheduled Every day)
- enabled Software Metering \Assets and Compliance\Overview\Software Metering (Some are enabled)
I have also checked on the clients if Software Metering is enabled
The swmproc.log
Using the following configuration properties from the site control file: SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Site Code HZ1 SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Parent Site Code SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Minimum Clean Up Age: 168 hours SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Integration Threads: 2 SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
New Usage Thread File Count Threshold: 50 SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
INBOX Polling Interval: 3600 seconds SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Integration Batch Size: 25 SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Maximum Retries: 3 SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Retry Interval: 1440 minutes SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Maximim Process Queue Size: 2048 SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Minimum Process Queue Size: 1024 SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Auto Create Disabled Rule: 1 SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Auto Create Percentage: 10% SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Auto Create Threshold: 100 rules SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Moving up to 2048 usage data files to the processing queue. SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Moved 0 .MUX files from the inbox to the processing queue. SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Moved 0 .MUV files from the inbox to the processing queue. SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Checking for new metering rules to create. SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)
Main thread waiting for file change notification or timeout after 60 minutes. SMS_SOFTWARE_METERING_PROCESSOR 9-5-2014 12:45:25 7824 (0x1E90)

You could check out mtrmgr.log file from the client and see what happens if you open and close programs.
After that try to run "Software Metering Usage Report Cycle" from client interface.
I did that (with the program Adobe Acrobat XI, which is enabled in de software metering in SCCM)
<![LOG[Termination event received for process 6032]LOG]!><time="14:19:50.818-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:292">
<![LOG[Creation event received for process 896]LOG]!><time="14:20:59.983-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:254">
<![LOG[Process ID 896 is for process C:\Windows\system32\taskeng.exe]LOG]!><time="14:21:00.083-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="processdata.cpp:142">
<![LOG[No matching rule found for process 896]LOG]!><time="14:21:00.084-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="3068" file="activeprocesses.cpp:65">
<![LOG[Creation event received for process 5796]LOG]!><time="14:21:00.118-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:254">
<![LOG[Unable to collect process information as process has terminated]LOG]!><time="14:21:00.168-120" date="05-09-2014" component="mtrmgr" context="" type="2" thread="2424" file="processdata.cpp:168">
<![LOG[No usage will be tracked for process 5796, as failed to get owner info or executable file name 80004005]LOG]!><time="14:21:00.168-120" date="05-09-2014" component="mtrmgr" context="" type="2" thread="2424" file="processdata.cpp:288">
<![LOG[Creation event received for process 4460]LOG]!><time="14:21:00.168-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:254">
<![LOG[Unable to collect process information as process has terminated]LOG]!><time="14:21:00.168-120" date="05-09-2014" component="mtrmgr" context="" type="2" thread="2424" file="processdata.cpp:168">
<![LOG[No usage will be tracked for process 4460, as failed to get owner info or executable file name 80004005]LOG]!><time="14:21:00.168-120" date="05-09-2014" component="mtrmgr" context="" type="2" thread="2424" file="processdata.cpp:288">
<![LOG[Creation event received for process 1056]LOG]!><time="14:21:00.168-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:254">
<![LOG[ProcessIdToSessionId failed for process 1056, error 80070057]LOG]!><time="14:21:00.168-120" date="05-09-2014" component="mtrmgr" context="" type="3" thread="2424" file="processdata.cpp:65">
<![LOG[No usage will be tracked for process 1056, as failed to get owner info or executable file name 80070057]LOG]!><time="14:21:00.168-120" date="05-09-2014" component="mtrmgr" context="" type="2" thread="2424" file="processdata.cpp:288">
<![LOG[Termination event received for process 5796]LOG]!><time="14:21:00.168-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:292">
<![LOG[Termination event received for process 1056]LOG]!><time="14:21:00.168-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:292">
<![LOG[Termination event received for process 4460]LOG]!><time="14:21:00.168-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:292">
<![LOG[No active process found with ID 5796]LOG]!><time="14:21:00.168-120" date="05-09-2014" component="mtrmgr" context="" type="3" thread="3068" file="activeprocesses.cpp:119">
<![LOG[No active process found with ID 1056]LOG]!><time="14:21:00.168-120" date="05-09-2014" component="mtrmgr" context="" type="3" thread="3068" file="activeprocesses.cpp:119">
<![LOG[No active process found with ID 4460]LOG]!><time="14:21:00.168-120" date="05-09-2014" component="mtrmgr" context="" type="3" thread="3068" file="activeprocesses.cpp:119">
<![LOG[Creation event received for process 5180]LOG]!><time="14:21:12.958-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:254">
<![LOG[Process ID 5180 is for process C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe]LOG]!><time="14:21:13.058-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="processdata.cpp:142">
<![LOG[No matching rule found for process 5180]LOG]!><time="14:21:13.058-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="3068" file="activeprocesses.cpp:65">
<![LOG[Termination event received for process 5180]LOG]!><time="14:21:14.469-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:292">
<![LOG[Creation event received for process 6000]LOG]!><time="14:21:17.425-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:254">
<![LOG[Process ID 6000 is for process C:\Windows\system32\DllHost.exe]LOG]!><time="14:21:17.525-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="processdata.cpp:142">
<![LOG[No matching rule found for process 6000]LOG]!><time="14:21:17.526-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="3068" file="activeprocesses.cpp:65">
<![LOG[Creation event received for process 3060]LOG]!><time="14:21:17.526-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:254">
<![LOG[Process ID 3060 is for process C:\Windows\system32\NOTEPAD.EXE]LOG]!><time="14:21:17.626-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="processdata.cpp:142">
<![LOG[No matching rule found for process 3060]LOG]!><time="14:21:17.626-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="3068" file="activeprocesses.cpp:65">
<![LOG[Termination event received for process 6000]LOG]!><time="14:21:22.459-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:292">
<![LOG[Termination event received for process 3060]LOG]!><time="14:21:27.948-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:292">
<![LOG[Creation event received for process 4732]LOG]!><time="14:21:29.108-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:254">
<![LOG[Process ID 4732 is for process C:\Windows\system32\NOTEPAD.EXE]LOG]!><time="14:21:29.208-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="processdata.cpp:142">
<![LOG[No matching rule found for process 4732]LOG]!><time="14:21:29.209-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="3068" file="activeprocesses.cpp:65">
<![LOG[Creation event received for process 4712]LOG]!><time="14:22:00.351-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:254">
<![LOG[Process ID 4712 is for process C:\Windows\system32\NOTEPAD.EXE]LOG]!><time="14:22:00.451-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="processdata.cpp:142">
<![LOG[No matching rule found for process 4712]LOG]!><time="14:22:00.452-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="3068" file="activeprocesses.cpp:65">
<![LOG[Creation event received for process 4260]LOG]!><time="14:22:21.022-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:254">
<![LOG[Process ID 4260 is for process C:\Windows\SysWOW64\DllHost.exe]LOG]!><time="14:22:21.122-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="processdata.cpp:142">
<![LOG[No matching rule found for process 4260]LOG]!><time="14:22:21.123-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="3068" file="activeprocesses.cpp:65">
<![LOG[Creation event received for process 3644]LOG]!><time="14:22:25.412-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:254">
<![LOG[Unable to collect process information as process has terminated]LOG]!><time="14:22:25.448-120" date="05-09-2014" component="mtrmgr" context="" type="2" thread="2424" file="processdata.cpp:168">
<![LOG[No usage will be tracked for process 3644, as failed to get owner info or executable file name 80004005]LOG]!><time="14:22:25.448-120" date="05-09-2014" component="mtrmgr" context="" type="2" thread="2424" file="processdata.cpp:288">
<![LOG[Termination event received for process 3644]LOG]!><time="14:22:25.448-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:292">
<![LOG[No active process found with ID 3644]LOG]!><time="14:22:25.448-120" date="05-09-2014" component="mtrmgr" context="" type="3" thread="3068" file="activeprocesses.cpp:119">
<![LOG[Termination event received for process 4260]LOG]!><time="14:22:26.054-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:292">
<![LOG[Termination event received for process 4988]LOG]!><time="14:22:35.001-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:292">
<![LOG[Termination event received for process 4712]LOG]!><time="14:22:36.865-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:292">
<![LOG[Creation event received for process 3560]LOG]!><time="14:22:41.995-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:254">
<![LOG[Process ID 3560 is for process C:\Windows\system32\DllHost.exe]LOG]!><time="14:22:42.095-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="processdata.cpp:142">
<![LOG[No matching rule found for process 3560]LOG]!><time="14:22:42.096-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="3068" file="activeprocesses.cpp:65">
<![LOG[Creation event received for process 6016]LOG]!><time="14:22:42.798-120" date="05-09-2014" component="mtrmgr" context="" type="1" thread="2424" file="swmtrmanager.cpp:254">

Outgoing destinations and outgoing servers reports empty

Hi,
We are using C150 series cluster.
We have defined only one listener for both outgoing and incoming mails.
When accessing reports under Monitor/Outgoing destinations or outgoing servers, the reports show no data found.
The counter under reportingconfig is unlimited.
The incoming mail reports work fine. The problem is with outgoing mail.
Is some configuration wrong with log subscription, or with the cluster?
Which type of logs are being read for outgoing reports?

There is an update on this (see release notes 6.7.6 for SMA)
Peter
Enhanced: Domain-Based Executive Summary Report
When you schedule a Domain-Based Executive Summary report, you now have the
configuration option to pull outgoing mail data from the domain of either the email server or
the email address. The system stores data for both, so you can configure this option differently
each time you schedule a report.Note —
This feature requires AsyncOS 7.0.0 or higher on the Email Security appliance topopulate the outgoing mail graph.

SCCM 2012 report empty, but Query Designer yields results!

Hello,
      I'm trying to produce a report to find out which computers have Office 64 bit running. I'm using this query
SELECT
      CS.Name0,
      ARP64.DisplayName0,
      ARP64.Version0
FROM
      dbo.v_GS_COMPUTER_SYSTEM CS
      join dbo.v_GS_ADD_REMOVE_PROGRAMS_64 ARP64 on CS.ResourceID = ARP64.ResourceID
Where
      ARP64.DisplayName0 like '%Microsoft Office Professional Plus 2010%'
running this in Query Designer produces the desired results except for the missing username. However, when I run it in Configuration Manager, I get absolutely nothing. Can anyone tell me what I'm doing wrong?
Jeff

Well until you know that it working in the web interface there is no point in looking at the CM12 console.
BTW I don't recommend viewing reports within the Console.
http://be.enhansoft.com/post/2013/09/10/Should-Configuration-Manager-SSRS-or-ASP-Reports-be-Accessed-from-the-Browser-or-the-Console.aspx
http://www.enhansoft.com/

Downloaded reports empty

Hi,
I'm just starting with the API, and have managed to get the script at http://msdn.microsoft.com/en-US/library/bing-ads-reporting-request-and-download-a-keyword-performance-report-in-php.aspx running finally.
When the zip file downloads it has
"Report Name: My Keyword Performance Report"
"Report Time: 1/5/2015"
"Time Zone: (GMT-08:00) Pacific Time (US & Canada); Tijuana"
"Last Completed Available Day: 1/6/2015 10:00:00 AM (GMT)"
"Last Completed Available Hour: 1/6/2015 10:00:00 AM (GMT)"
"Report Aggregation: Daily"
"Report Filter: "
"Potential Incomplete Data: true"
"Rows: 0"
but I can see keywords etc when logged in. I've checked the accountId and campaignId (same as URL at the top, but also checked settings).
Any thoughts where I can go from here ?

When you are logged into the Bing Ads web application, do you see performance data e.g. Impressions and Clicks when requesting the same time period i.e. January 5, 2015? If there is a discrepancy between performance data from the UI vs API, please escalate
to support with the details:
http://msdn.microsoft.com/en-US/library/aa983155.aspx#engagesupport
Best regards,
Eric

Why is my Subscriber Message activity report empty?

Hi,
I trying to see who called and left messages for ceratin individuals before they were deleted. This report would be just what i am looking for except the columnes are all blank. Could it be becasue the user deleted the messages from their inbox or is there a parameter that has to be set. I am runnng CUCXN 7.1(5)ES7.
Thanks in advance.

Hi there,
You are hitting this 7.x bug;
CSCsr45007 - Subscriber Message Activity report problems
Description
Symptom:
Subscriber Message Activity Report doesn't have data that is expected. Many fields come up as N/A or blank.
Conditions:
This happens any time the report is run.
Workaround:
None.
Further Problem Description:
This underlying problems were diagnosed after 7.0 shipped and will be addressed in 8.0. It entails a rewrite of this report.
First Found in: (4)
1.2(1),2.0,7.0(0.313),7.0(1)
Status:
Fixed
Last Modified:
May 26,2012
Fixed in: (8)
8.0(0.215),8.0(0.207),8.0(0.205),8.0(0.189)
8.0(0.178),8.0(0.168),8.0(0.164),8.0(0.160)
Product:
Cisco Unity Connection
Platform:
Dependent
Severity:
4 - minor
You may want to have a look at the ideas from Jeff in this thread
https://supportforums.cisco.com/message/1209592#1209592
Cheers!
Rob
"Every fool's got a reason to feelin' sorry for himself" - Springsteen

CiscoPrime LMS 4.1 Syslog Report Empty

I have a new install of LMS 4.1 on a Windows server I'm trying out. I have switches and firewalls syslogging to the system, but when I run any kind of Syslog report (Reports > Fault and Event > Syslog) it's always blank. I ran a Wireshark capture on the server and it's definitely receiving a ton of syslog data from the systems. What am I missing here? :-)

perhaps this is of some help for anybody....
I just troublshoot a LMS 4.2.1 installation on windows where the syslog report did not show any syslog message ("no data available") nor did any syslog report had any data.
SyslogCollector and SyslogAnalyzer where running fine and the server itself was successfully subscribed to the SyslogCollector (Admin > Collection Settings > Syslog > Syslog Collector Status). What was really suprising was the fact, that the counter for "Forwarded" messages was rising when syslogs arrived in the syslog.log file.
In the end it turns out, that this was a fresh installation of LMS 4.2 (updated to LMS 4.2.1) and the effort to restore the database from the old LMS 3.2.1 system failed. To get the minimum data form the old LMS system, only the devices were exported form the old system and imported into the new system - a discovery was never done.
In the AnalyzerDebug.log I found that while the system was trying to insert the messages into the syslog db the process fails because it could not associate a DcrId to the IP which was sending the syslog message.
Also DNS was running in round-robin mode in the network. I finially added the devices to the hosts file, did run a discovery and the syslog messages started to show up in the report.
to see the relevant messages in the AnalyzerDebug.log, debugging for SyslogAnalyzer must be turned on.
these are the troubleshooting steps and this is what I saw in the AnalyzerDebug.log:
=======================================
enable debugging
Admin > System > Debug Settings > Config and Image Management Debugging Settings
Set Application Logging Levels >> SyslogAnalyzer (scroll down)
set Syslog Analyzer and Syslog Analyzer User Interface from INFO to DEBUG
(do not foret to reset debugging when finished!)
NMSROOT\log\AnalyzerDebug.log
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],com.cisco.nm.rmeng.util.DCRWrapperAPIs,getResultFromQuery,4008,Counter : 17
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],com.cisco.nm.rmeng.inventory.InvAPIs,getDeviceIdsFromIPAddresses,3038,For IP Address: 192.168.x.x Device id is:null
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],Device id not found even in the inventory
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],Found the device id as null
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],Attempting to insert the syslog into database
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],Preparing to hand of syslog to the database handler
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],Syslog length=1
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3], Time stamp of the syslog received is : Fri Aug 10 14:34:02 CEST 2012 GMT 10 Aug 2012 12:34:02 GMT
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],Inside execute mothod
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],Insert into SYSLOG_20120710(Syslog_Device_Id,Syslog_Device_Name,Syslog_TimeStamp,Syslog_Facility,Syslog_SubFacility,Syslog_Severity, Syslog_Mnemonic,Syslog_Description )values(?,?,?,?,?,?,?,?)
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],Inside Retry count
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],Connection is now false
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],Recreated the statement object
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],Row count 1
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],Added syslog to the database handler
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],Insertion of syslog into database is done
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],Attempting to find interested actions, bypassing
[ Fri Aug 10 14:34:54 CEST 2012 ],DEBUG,[ActionThread3],Syslog is found to be unexpected. No actions will be taken, returing
[ Fri Aug 10 14:36:33 CEST 2012 ],DEBUG,[Thread-15],Preparing to get collector status
[ Fri Aug 10 14:36:33 CEST 2012 ],DEBUG,[Thread-15],Current no. of collectors is 1
[ Fri Aug 10 14:36:33 CEST 2012 ],DEBUG,[Thread-15],Processing for the subscription LMSServerNmeLMSServerName
[ Fri Aug 10 14:36:33 CEST 2012 ],DEBUG,[Thread-15],getCollector =192.168.y.y
[ Fri Aug 10 14:36:33 CEST 2012 ],DEBUG,[Thread-15],Port4444
[ Fri Aug 10 14:36:33 CEST 2012 ],DEBUG,[Thread-15],Connected to the collector 192.168.y.y@4444
[ Fri Aug 10 14:36:33 CEST 2012 ],DEBUG,[Thread-15],Gathered status from collector
[ Fri Aug 10 14:36:33 CEST 2012 ],DEBUG,[Thread-15],Captured the status from the collector
[ Fri Aug 10 14:36:33 CEST 2012 ],DEBUG,[Thread-15],Done with the status collection
==================================================

W520 i7-2860QM with 2 memory modules and CPU-Z Reporting them as Slots 1 and 3?

Is this normal for CPU-Z (1.59, 1.60, 1.61) to report a matched kit pair of properly populated memory modules as Slots 1 and 3 in "dual" mode? One is under the keypad in the upper slot #0 while the other is in slot #1 under the chasis on the left closest to the DVD (with the black plastic frame).
Slots 2 and 4 in CPU-Z are reported empty.
I think this is okay and just the way CPU-Z is setup to report the SPD info but would like to double check out here with others using only 2 of their 4 memory slots.
I'm running a fresh clean bloatware-free Win7 Pro SP1 installed to my Samsung 840 Pro 512GB SATA-III SSD and holding at BIOS 1.36. I'm using 1600 speed 2x8GB Corsair Vengeance modules (a 2x8 kit with adjacent module serial numbers). Optimus and the integrated graphics are both disabled in BIOS and the unit never leaves its 170W Series 3 Plus docking station w/ external monitor, keyboard and mouse ..... it runs with the lid closed nice and cool, plus quiet also.
CPU-Z also reports I'm actually running at 1600 on the memory and I have thrown every torture test I know of at this configuration and have not had any issues yet over the last 6 weeks. Benchmark programs are also all on the very high end of the ranges published for W520 units ..... probably with a lot of help from that 512GB SSD SATA-III Samsung 840 Pro.
I never plan to ever use the on-board graphics, so I'm getting ready to install my other identical Corsair 2x8 kit next week and see if stability issues arise at 32GB using 4 modules ...... will hold at BIOS 1.36 unless things start happening at 32GB.
Thanks in advance for any input about the way CPU-Z reports pairs of memory modules.
Two (I used to have Five) - T61p 15.4" WS T9300 2.5Ghz units, August 08/08 Builds with FX570M Nvidia Graphics; ... One W520 i7-2860QM w/2000M Nvidia Graphics (most recent acquisition and stupidly fast); .... One - T42 4:3 15" Flexview 1.8GHz with ATI Graphics (still perfect for traveling); ... Two - T500 15.4" units both with ATI HD3650 Graphics.

Quote
Originally posted by Wonkanoby
if it drops that low rms the psu
Sorry for asking, but what's rms? I found nothing on google that seemed to fit in, but I guess you mean to get rid of the PSU and get a new (better) one.
I also ran memtest86 for 3+ hours and it seemed that one of my memorysticks was heavily corrupted.
So I removed that one and ran memtest86 again for an hour without any problems, but the volt keep dropping anyway... and the freezing-problem persists.
Hopefully I can purchase a PSU on approval and run some test.
Thanks for the quick answers guys!
edit: By the way, which brand do you recommend for the PSU? Right now I have Topower, cheapest one I could find when I bought my computer about a year ago (only bought the two extra memorysticks last week).

Report empty

Similar Messages

Maybe you are looking for