Report filter and column formula filter help

Using OBIEE 11.1.1.6.8
I have a column formula in an OBIEE Analysis that queries data based on a specific File Date:  31-Oct-2013.   the formula looks like this: SUM(CASE WHEN "CLOV - File Date"."File Date" = '31-OCT-2013' AND "Pending Claim - Process Time"."Claim Date" <= TIMESTAMP '2013-01-31 00:00:00' THEN 1 ELSE 0 END)
The issue is I have other columns that need to query data as of the most recent File Date available.  For that, I usually use this in the report filter section:  SELECT MAX("CLOV - File Date"."File Date") FROM "VETSNET OPERATIONS REPORTS".   this will pull the most recent date available.
What formula(s) do I need to use so I can have other columns pull the most recent data while the other column always uses the 31-Oct-2013 date?

If you like to port the same logic in Analysis then that might be easy to do.
Not sure how to handle other column ie Claim without looking data, but try with a new metric max(File Date) and set the content level may be Year or as per requirement and use that column in the same expression
let us know updates

Similar Messages

  • Report Header and Column Header Removal

    Hi,
    we wanted remove report headers and Column header in each downloaded report. we are planning on using the Report header specifiers while reading each line, specifiers like "Report Name:","Report Time:","Time Zone:","Report
    Filter:", etc.,
    Here the question is are these values changes in a given version for each report? OR is it better to go by using line numbers i.e say first 8 lines always represents Report Headers and Next line is always blank and 10th line is always Column Header?
    Report Name: Budget Summary
    Report Time: 1/18/2015
    Time Zone: Various
    Last Completed Available Day: N/A
    Last Completed Available Hour: N/A
    Report Aggregation: Day
    Report Filter:
    Rows: 615
    Date Account number
    Account name Campaign name
    Currency code
    Thanks

    Good question. Yes the reports all generally follow the pattern you described. I have reached out to the feature team, and will follow up with the suggested best practice. 

  • Difference between aggregation rule and column formula in edit formula

    Anybody please help what is the use of aggregation rule and column formula in edit column option.
    What is the difference if I apply sum in aggregation rule with apply sum(column name) in column formula.
    When do I need use which one.
    Thanks in advance

    When you build a column in the rpd, you have the option of determining if the column should be aggregated in some way or not. For dimension columns, you wouldn't put aggregation. For say, an accoun ledger balance column, you might put the aggregation SUM or AVERAGE. Whatever aggregation you put on this column will be the "default" aggregation of the column in Answers.
    So in Answerrs, if you use the Account Ledger Balance column and you only have Region as the dimension, OBIEE will aggregate or SUM the ledger balances so you have a SUM for the region level. If you had district, than the ledger balance column will aggregate to the district level. This is a convenient way to build reports without having to specify what the aggregation should be.
    However, OBIEE gives you the ability to override what the default aggregation is for a particular column. This is the purpose of the drop down in the bottom left of a column when you click the fx button.
    Say the default aggregation of ledger balance is SUM in the rpd, but for the report you are building, you want the average, you can apply the AVERAGE function in the fx window and it will overridge the SUM aggregation rule that was in the rpd.
    Got it?

  • Row and Column Formulas on a Data Form

    I am creating a data form which has both row and column formulas. I would like the row formulas to show for some of the cells but it seems to default to the column formula.
    How can I get my form to show the row formula result and not the column formula result?
    Thank you!

    Brian,
    See this example:
    http://htmldb.oracle.com/pls/otn/f?p=31517:160
    There are also a coupleof others showing the same thing you want to achive.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://htmldb.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • Src Addr filter and Dst Addr filter

    Wht is the format/syntax of specifying IP addresses in the Src Addr filter and Dst Addr filter fileds of any signature?
    Can i put a subnet, multiple subnets etc ? any syntax examples?
    I can't put the $<VARIABLE> is wht i have found out.

    Here are some examples:
    192.168.1.1
    192.168.1.0-192.168.1.255
    192.168.1.0-192.168.1.255,192.168.2.0-192.168.2.255

  • How to use, Case function and Filter in Column Formula?

    Hello All,
    I am using case function and also would like to filter value to populate.
    Below is showing error :
    case
    when '@{Time}' = 'Year' then "Time"."Fiscal Year"
    when '@{Time}' = 'Quarter' then "Time"."Fiscal Quarter"
    when '@{Time}' = 'Month' then FILTER ("Time"."Fiscal Period" USING "Time"."Fiscal Period" NOT LIKE 'A%')
    else ifnull('@{Time}','Selection Failed') end
    Thanks, AK

    when '@{Time}' = 'Month' then FILTER ("Time"."Fiscal Period" USING "Time"."Fiscal Period" NOT LIKE 'A%')I dont think Filter this works here or any other data types except number.
    Try to use option Column's->Filter->Advanced->Convert this filter to SQL
    If helps mark

  • Hyperion Reports - Row and Column templates

    <p>Sorry if this may be a bit basic but we are new to Hyperionreports. Currently we are going through a redesign process and washoping to get some viewpoints on the benefits of using row andcolumn templates within reports. I am looking at this option butgetting frustrated by the limitations around formatting, etc</p><p> </p><p>Are there any views out there on the preferred options. We havea particular style in design we need to include which is becomingdifficult when we use row and column templates</p>

    it may also worth cross checking below form doc:
    a.If your row and column template contains formulas with external references (for
    example, to cells outside of the selected row and column template), you are prompted
    to modify those formulas before saving the row or column template.
    Note: You can save a row and column template that contains cell formulas, as these can
    be discarded. For more information, see step 9.c on page 115.
    b. If a secondary database connection was specified within the row and column template,
    a dialog box displays prompting you to continue saving the template. If you save the
    template, the secondary database connection you specified in the row and column
    template is discarded. The primary database connection is then used for the row and
    column template.
    c. If unsupported properties are found, an Information dialog box presents a list of
    properties to discard before saving the template. For example, if the row and column
    template contains a cell formula, you can choose to save the template without the
    formula or not save the template.

  • Print report parameter and column headers PDF format from Discoverer Viewer

    Hi,
    From Discoverer Viewer 4i I'm presently using the printer friendly version to print my workbooks. I would like to know if their is a way to include report parameters and print column headers on every page.
    I would appreciate any pointers or workarounds to this issue at the earliest.
    Thanks
    T

    Hi T
    I don't think this is possible with 4i.
    Have you considered upgrading to 10g R2?
    Best wishes
    Michael

  • I have Camera Raw 8.7.1 and I don't have camera raw filter and the radial filter tool

    I have Camera Raw 8.7.1 and I don't have camera raw filter or the radial filter tool.  Reading on line says it should be available?  I am confused... why do I not have these tools?

    Because you’re using CS6 not CC.

  • Passing filter values from column formula in OBIEE 10g

    Hi,
    I am trying to pass filter value from the column LY Spend YTD columns where we have a filter option and passing the year filter 2013 as below.
    FILTER("Fact - Purchasing - Invoice"."LY Spend YTD" USING (Time."Year" = '2013'))
    My goal behind doing this is, we have a filter already present for the whole criteria on the year which is 2012.
    But specifically for this column i dont want to pass the year 2012 to it, Instead I want to pass 2013 to it. But I am not succeding the result is blank.
    Please suggest and let me know if further understanding is needed.

    Hi Srini
    Thanks for you reply.
    I cannot do that way because some measures are satisfying with year 2012 and displaying the data and other measure are satisfying with 2013.
    I am working on LY Spend YTD, LY spend YTD - 1, Spend YTD and Year ago spend.
    So thats the reason I have thought that way of passing the filter in column formula irrespective of criteria filter.
    Please suggest.

  • I have Camera Raw 8.7.1 installed.  Sometimes it will allow me access to the Radial Filter and sometimes not.  Why?

    I have Camera Raw 8.7.1 installed.  Sometimes it will show me icons for the Graduated Filter and the Radial Filter and I can use both.  At other times it will not show the Radial Filter and of course when that happens I can't use it.  Why?

    I have CS 6 installed as well as a subscription to Photoshop CC, but I don't use CS 6.  I'm just keeping it around in case Adobe jumps the CC subscription price out of sight.  I was using Photoshop CC and Bridge.  I always pass my .nef and .jpg files through ACR first.  Sometimes the Radial Filter button is there and sometimes it is not.

  • Check the table and column name in R12 web screen

    Hello Friends
    Please any body can tell me how can I find out the table name and column name in web based forms like supplier, customer in R12. In 11i I can find out the table name and column name from help menu by record history and diagnostic -> examine menu.
    Thansk
    Makshud

    Hi,
    Please see (Note: 741366.1 - How to get Supplier table information? How to get About this Page link in OA page in R12).
    Thanks,
    Hussein

  • Filter Function in Column Formula is not working properly

    Hi,
    I am using Filter Function in Column formula tab in Answers to calculate the Total sum from the start of the Fiscal month to the Month selected from the Prompt.
    My requirement is I have total sales column. Now I need to calculate TYYTD kind of thing for which I cant use the Time sereis due to my report constraint.
    Instead of that I am using this Filter function on TYYTD column where i am giving the filter as start of the Fiscal month to the month selected from the Prompt.
    For example if I select May month from the Prompt then this TYYTD column should give me SUM(Total Sales) between Feb and May for which I am using the Filter Function. But it giving me only May sales whcih is same as Total Sales column.
    Can anyone throw some light on this as this is very important for us or any alternate solution other than Time sereis measures.
    Did anyone got this kind of issue with Filter Function?
    Regards,
    Azad

    Ok...here's the steps to fix this as efficiently as possible.  I have a whole bunch of mailboxes under "On My Mac" and they have a bunch of mailboxes nested in them.  I get my messages into Apple Mail via IMAP.  (I don't know if this matters.)  The steps below assume you have a similar setup.
    1.  Hold the Option key down and click the dropdown arrow next to each mailbox that has one.  This will cause all nested mailboxes below it to appear.
    2.  Go to the top of the list of mailboxes under "On My Mac" and highlight the first mailbox.  Then hold the Shift key down and highlight the last mailbox in the list.  This will cause all of the mailboxes and nested mailboxes to be highlighted.
    3.  From the menu, select "Mailbox --> Rebuild" and the rebuild process will start.
    4.  Watch the top of the mail screen to see the message count change as the mailboxes are being rebuilt.  Wait until the activity stops before doing the next step.
    5.  As the mailboxes were rebuilt, many messages were reset as "Unread" even though every message was previously "Read."  Make sure the mailboxes you want to affect are still highlighted.  Right-click and select "Mark All Messages Read."
    That fixed the problem for me.

  • QSUF (Query string url filter) and SQL Server reporting services report viewer parameters

    Hi,
    this is my issue:
    I have a SQL Server reporting services web part on a page with a report with 1 parameter, lets say it's a client list
    Then i have a QSUF that will be used to filter the clients list through the URL
    However, once i connect the filter and the report viewer web part, the parameter goes away and is no longer accessible
    I'd like to somehow keep the parameter visible, in case there is no parameter sent through the URL, i would like the user to be able to choose a client from the parameter drop down list
    I saw that there is a "send empty if no values are passed" option, but i can't seem to get this working properly and i don't know if this option will make the parameter visible again
    Any help would be appreciated
    Thanks.

    Hi,
    According to your post, my understanding is that the query string url filter web part not worked well with SQL server reproting services web part.
    Did you use the Wiki page layout in your environment?
    You can change the page to a web part page, then check whether it work.
    There is a similar thread for your reference.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/4d7584e3-8e1a-48bf-9346-32f8cb480dd1/query-string-url-filter-web-part?forum=sharepointgeneralprevious
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Display and filter custom columns in a presentation

    I haven't found anything in the documentation, so I post this question and hope to get an answer:
    In ALBPM 6 is it possible
    A) to display custom columns in a presentation, and
    B) to filter using these custom columns in a view?
    I am thinking of having several views enabling to display process instances by certain filter criteria: builtin but also custom criteria.
    Thanks a lot!
    Bernd

    Oh oh. I have just found documentation:
    What are Project Variables?
    Project variables are a special kind of instance variable which has more visibility than a normal instance variable. Project variable values can be searched for, and can be displayed in AquaLogic BPM WorkSpace views.
    So I will go and test this.

Maybe you are looking for