Report for Inspection Results

Hi experts,
Is there any standard TCODE which can list out all the inspection results by material?
Any activation required?
Regards,
Daniel

Hi,
QGP1 is too discrete because I need to input the characteristics one by one.
MCXB have no results displayed.
MCXD have no results displayed.
I need SAP provide a list of inspection lots, plus defect informaiton within a time period (like by month).
Regards,
Daniel

Similar Messages

  • COOIS or Most Efficient Report for Inspection Rework/Rejects

    I need to prepare a report to show the total number of rework/rejects and inspection over-runs, for the last three years, against a few cost centers.   I would like to utilize COOIS....how?   If  COOIS isn't the best way, please advise!  Thanks!!

    Dear ,
    If you are dealing with rejection or rework from Qulaity management stand point i would rather say please look ton following :
    1.You check in the following tcodes MCXX,MCXB,MCXD
    2.Pls. Check in Tcode : QE51N ( Inspection Results Recording).
    3.You can get the cost report in KOB1 agaist order
    4.Some of the reports are COOIS, CO28, MMBE, MB51, MB5B.
    Also advice you to execute t code SAP1, you will list of available standard reports in SAP of all modules.
    Evaluate the same. You requirement can be fullfilled by those reports.
    If you do not find suitable reports for some of the requirements then you can think of developed reports.
    Take help from you ABAP consultant.
    Hope this helps you.
    Regards
    JH

  • Report for inspection lots

    Hi All,
    Report for the inspection lots that clear UD but still in inspection stock( no posting is done).?
    Thnaks
    vbraj

    Dear Raj,
    Please try report QVM2.
    Best Regards,
    Anand Rao

  • Report for payroll results

    Hi all,
    I want the report where i have the fields as employee Id, employee name, bank account number and amount transferred to the bank for a particular month.
    If I try from Infoset Query, I can take the first three fields from the respective Infotypes. But I am unable to find the amount transferred to the bank (/559 Wage type value) in any infotype. Nor I am able to fill the 042 or 043 IT from report RPABRI00.
    How to get the report?
    Please revert
    Regards
    Deepti

    Hi,
    Check this thread .
    Payroll reports.
    If you want RT data,you cannot do it through Query.You can do it through customized program.
    Check standard Reports as well
    Eg.S_AHR_61016101 - Remuneration Statements
    S_AHR_61016102 - Payroll Accounts
    S_PH9_46000156 - Bank Details
    S_AHR_61016170 - Payments and Deductions
    You cand this reports in Info system under your country payroll.
    Manoj.

  • Standard report for Payroll Results wth Pay Scale Groups

    Dear Experts
    Is there any standard report to view payroll results, Pay Scale Group wise.
    In CWTR and ANN, i cdnt find Pay Scale Group of an employee.
    Thanks in advance
    ...Sadhu

    Can we enhance CWTR report ? is it possible ?
    any guidance ?
    Thanks in advance
    ...Sadhu

  • CM2012 Single report for deployments (packages, apps & TS)

    With the introduction of the new Application Model deployments in ConfigMgr 2012 is there anyway to report on deployments regardless is its a package, TS or App deployments in terms of status and laststatus time.
    Hi All,
    **Re-posting in correct forum :-) **
    I've been looking through the current reports and I haven't found a way to report on what we need.
    Our requirement is to be able to report on the count and status of the deployments per Client that have executed in a given timeframe (say the previous 30 days\1 month)
    What we are trying to achieve is a single report for the results of all deployments (apps, packages, TS) per client within a certain timeframe.
    When it was simply advertisements in ConfigMgr 2007 this could be achieved using the Last Status times within the ClientAdvertisementStatus view in combination with the views Advertisement, AdvertisementStatusInformation and CurrentAdvertisementAssignments.
    There is some decent reporting on deployments – particularly the DeploymentSummary view, which contains combined information on Apps, Packages and TS but what seems to be missing is the last or latest status time to indicate when
    the status occurred (or when the app deployment executed). I’ve been looking through the other views but haven’t yet found a last status time so we can report within a given timeframe.
    Anyone else looked at creating this or something similar yet?
    Thanks

    Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
    It is unclear to me, do you look at the built-in report and try to modify them? Which built-in report give you the best results?
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • QM inspection result reports

    Experts,
    How come there is never any data for QM reports such as MCXA, MCXB, MCXD, MCXI although inspection lots are available in the system?
    Is there another report that I can use to see inspection results in a table layout, e.g. list of batches on one axis, list of characteristics on another and the results?
    Thanks!
    Rgds

    Sure you can.  Simply add some of the standard characteristics to the batch class that SAP provides.
    LOBM_APO_SL_MAX     Max shelf life/maturity in sec
    LOBM_APO_SL_MIN     Min shelf life/maturity in sec
    LOBM_APO_SL_UTC     Reference time stamp of batch
    LOBM_BPRIO     Stock determination: priority
    LOBM_BWTAR     Valuation type
    LOBM_HERKL     Country of Origin
    LOBM_HSDAT     Date when batch was produced
    LOBM_KRT     waiting period of a batch
    LOBM_LFDAT     Batch determin. delivery date
    LOBM_LGORT     Storage location
    LOBM_LVORM     Deletion ind. for batches
    LOBM_MBDAT     Material availability date
    LOBM_MENGE     Batch determination sort qty
    LOBM_QNDAT     Next insp. date for batch
    LOBM_QSCORE     Qualityscore Usage Decision
    LOBM_RLZ     Remaining shelf life for batch
    LOBM_RLZ_PROZ     Req. remaining rntme in proc.
    LOBM_UDCODE     Usage Decision
    LOBM_VERAB     Availability date
    LOBM_VFDAT     Expiration date, shelf life
    LOBM_ZUSTD     Status of batch
    Not all of these are suitable to add to the batch class.  Some are designed strictly for batch search strategy classes.  There are several OSS notes out there on the use of these.  As you can see, several of these are date related.  I usually always add LOBM_HSDAT, LOBM_UDCODE,and LOBM_VFDAT.
    As you can see, the Batch number is not in the list of standard characteristics.  This can be created however.  Create a general characteristic with reference to table MCH1, field nanme CHARG and add this characteristic to your classes.  You can then use it to search and sort for specific batches just like any other characeristic in CL30n.  When displayed, the field is greyed out from user entry since it is a referenced field.
    Craig

  • Inspection results for more than one lot

    How do i see inspection results for different lots of the same material together in a single screen. Is there any standard report or query available in SAP?
    Prahlad

    Dear Prahlad
    You can see it in ways
    1) Go to QS28. Input the plant and the mic and execute. You will get MIC details. Choose the MIC and click on Result history. A pop will appear Result history Limit Selection. In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots
    3) Go to QA33 > result> Select the Mic> go Result historyhistory >In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots with all values and charts
    4) standard reports such MCXD,QGP1 can be used
    Hope this helps
    Regards
    gajesh

  • Inspection result report

    Hi All,
    My client needs inspection report Work centre (date wise).
    In MCXB it is coming work centre wise but moth wise I am gating.
    In QGA2 its coming work centre and date wise but problem is after expanding the column all information is not there like accepted & rejected quantity, lot seize, percentage rejection, inspection origin.etc.
    Please help me out, how to get such report.
    Regards,
    sid

    SAP does a lousy job of providing inspection result reports.  There are not many ways to get the actual recorded value(s) for a test, or inspection lot.
    For what you want, I woud suggest you develop a custom report.
    FF

  • OBIEE 11g - Customized Message for No result On all Reports

    Hi,
    The default messages displayed is getting displayed when a report returns no data in OBIEE 11g. I am aware of that, we can overide the default message with our Custom message at "Analysis" level. but it is very painful to do.
    I am looking for a file where we can override the default messages with our custom message at one place.
    Also, I have gone through the below link for this but it has change at the language level. I tried to change it at language "l_en" level but it did not work.
    can anyone suggest for 11g?
    http://obiee10grevisited.blogspot.com/2012/02/customized-message-for-no-result-on-all.html
    Edited by: Nagen on May 6, 2013 4:36 PM

    Hi Nagen,
    Using a custom message should also work in 11g. Refer to this link for setting up custom messages in 11g.
    http://www.rittmanmead.com/2010/12/oracle-bi-ee-11g-styles-skins-custom-xml-messages/
    Thanks,
    Gaurav

  • Key instead of Text in Results Object in Crystal Reports For Enterprise

    Hi All
    I recently developed a report in Crystal Reports for Enterprise and at some point afterwards the text description of the hierarchy used in the report was changed.  The Key remained the same, however this caused the report to crash.  The solution was to click Edit Query Option in the Results Objects and simply come out without changing anything.  This refreshed the results object pane and the report ran as normal.   I work in an environment where the text of hierarchies is liable to change frequently and without notice and it will be unfeasible for me to constantly refresh the results object every time a change to a hierarchy is made.  Therefore is there a way to define in CRE to use the Hierarchy key instead of the text as this is less likely to altered?
    Many Thanks in advance
    Neil

    Excuse me I have my terminologies mixed up, what I mean is the name of the characteristic used in the report.  An example would be a characteristic called with the text of "Material" and a key of "0MATERIAL", if I were to change the text description to "MAT" and the key where to remain the same.  This would cause crystal report to error because it expecting the Characteristic name to be "Material".  Is there a setting or something in CRE to have it default to the key only so if the text of a characteristic or even a key figure for that matter where changed there would be no impact to the Crystal report.
    I hope this makes more sense this time round
    Thanks
    Neil

  • Customized Message for No result On all Reports

    Hi all,
    I need to change the custom message that we get for No Result.Instead "the specified criteria dint result in any data"..i have put in my different message for all the reports.Any Idea how I get it done.???Any setting ???
    Regards

    Got it guys
    can be done by the below steps:
    The default messages displayed when a report returns no data are in:
    BI_HOME\web\msgdb\<language>\messages\viewme ssages.xml
    You can override these messages in by creating a custommessages.xml file in BI_HOME\web\mesdb\customMessages
    For example, the following changes the default 'No Results' message:
    <?xml version="1.0" encoding="utf-8"?>
    <WebMessageTables>
    <WebMessageTable system="Custom Messages">
    <!-- Change No Results message -->
    <WebMessage name="kmsgEVCNoRowsTitle"><HTML> ;No Data Found!</HTML></WebMessage>
    </WebMessageTable>
    </WebMessageTables>
    You will need to restart your Presentation services to make the changes effective.

  • MC+E Report not giving results for One Plant

    Dear All,
    I am executing MC+E standard report for four plants but I am not getting the output for one plant. This report fetches data from the table S001 while executing VA01. I checked that there are no entries for that plant in this table hence obviously I cann't get the output.
    Can anyone suggest me where lies the problem. My SD consultant is able to generate invoices, but the result of VA01 are not getting reflected in S001.
    Regards,
    Alok.

    Dear Alok,
                   Same was the problem with me, one of my seniors helped me with it. The report does not reflect data for the other one, as somebody may have made changes to the standard Info Structure.Probably a 'Z' or 'Y' update group is mainatined and proper update rules are not attached to the info structure. Ask you SD consultant to check out the update rules. It is a big risk to make changes to the info structure as it may lead to loss of Master and may stop functioning of SAP across modules. Ask a expert from SD to work onto it.
    Reagards,
    Ashutosh
    [email protected]

  • How to genrate Report for Result of SNP & PP/DS ?

    Hi All,
         Currently i am working on SCM 5.0 Version.
       I need to prepare a Report for Product Wise Planned Order or Production Order & Resource Wise Planned Orders or production Orders.
      Can anyone tell me How can achive the above requirement?
    Thanks in Advance!
    Regards
    Sujay

    you should be able to find standard reports to do this (in the main menu)
    you can also use rrp7 to get the list

  • How to take report for Employee past pay results!!!

    Hi Experts,
    I would like to know how to generate report for employee's past pay roll, which gives information pertaining to employee's pay hike if any and other details.
    Please advice...subbu14blueatgmail.com
    Thank you in advance for your help.
    Regards,
    Subbu

    Hi,
    Pc00_M40_calc though you can do the live run then
    go PC00_m99_CWTR here you can select the payroll period button
    There you can give the payroll area and selection periods.
    Then you can give the  company code, and what ever you can personnel area wise and all.
    Below that screen you need to select the Lay out variant.
    Then you can execute that report.
    Then you will get the wage types and the amount.
    Any query's let me know.
    Thanks and Regards,
    Revathi.

Maybe you are looking for