Report for manually close GRPO

Hi Experts.
Hope you are all doing well.
Here all I need to know that if we can find out whether GRPO closed automatically or manually.
Regards,
Ravi

Hi Ravi,
If target entry is blank on GRPO and document is closed means it is closed manually.
IF target document is created from GRPO and GRPO status is closed i.e. cliosed automatically.
run below query to get list of GRPO's closes manually:
select T0.DocNum from OPDN T0 Inner JOIn PDN1 T1 on T0.DocEntry=T1.DocEntry
Where ISNULL(T1.TrgetEntry,'')='' and T0.DocStatus='C'
Thanks,
Neetu

Similar Messages

Query Report for manual Reconciliation

Hi Experts
I want to take print layout for manual reconciliation or can any provide me with a query .It will be very much useful for me
system path: modules -
>Banking----
Bank Statements & External Reconciliations --->Manual Reconciliation
here I give inputs and run it then i wil1 get Reconciliation Bank Statement
this report i want to take as PLD Or Provide me with a Query
Please do needful !!
thanks In Advance
Thanks & Regards
Jenny

Hi Jenny,
I'm currently working on a report to identify if there is a stand alone credit memo for an invoice. I am using the OITR and ITR1 tables. Here you can identify whether there was any type of manual reconciliation within the system. The "ReconType" will be "O". I'm sorry I cannot provide the report, but this should enable you to write the query.
Taylor

Opening multiple reports in Crystal Reports for VS causes database connect limit to be reached. Seems to be no way to force Crystal Reports to close database connection (other than exiting application)

I am working on upgrading an application that has been in use for many years. The application is written in VB6 and I have been tasked with upgrading the current application to Crystal Reports for Visual Studio. I am using Crystal Reports for VS Version 13.0.12.1494. The system's database is a Sybase SQL Anywhere 16 database with an ODBC connection using integrated login. Each of the reports has the database connection set up from within the report. There is only once database server, so each of the reports are pointing to the same DB. The database server is currently installed as a "Personal Server" with a limit of 10 connections.
I have implemented the CR viewer as part of a COM-callable wrapper that exposes a COM interface for VB6 to interact with. Inside of my viewer component is a Winform that embeds the Crystal's Report viewer. The COM interface basically maps the basic Crystal apis to methods that the VB6 can call (i.e., Load Report, Set Field Text, Update SQL Query, etc). This architecture is working as designed and the reports are displaying correctly and responding correctly to changes in queries, etc.
The issue is that after I open 9 reports, the tenth one will respond with an error indicating that the database connection limit has been reached. The database connections used by the reports aren't released until after the application is closed. The application is designed for a secure environment that prohibits the non-administrative user from accessing the systems desktop, so asking the user tor restart the application after 10 reports isn't a viable option.
I have checked and database connection pooling is turned off for the SQL Anywhere 16 driver.
I have been digging on this for a few days and have tried adding code in the FormClosed event to close and dispose of the Report Document as follows:
ReportDocument reportDoc= (ReportDocument) crystalReportViewer1.ReportSource;
reportDoc.Close();
reportDoc.Dispose();
GC.Collect();       // Force garbage collection on disposed items
I have also tried the following (as well as maybe 20 or so other permutations) trying to fix the issue with no success.
ReportDocument reportDoc= (ReportDocument) crystalReportViewer1.ReportSource;
foreach (Table table in reportDoc.Database.Tables)
     table.Dispose();
crystalReportViewer1.ReportSource = null;
reportDoc.Database.Dispose();
reportDoc.Close();
reportDoc.Dispose();
reportDoc = (ReportDocument)crystalReportViewer1.ReportSource;
GC.Collect();       // Force garabe collection on disposed items
Any ideas or suggestions would be greatly appreciated. I have been pulling my hair out on this one!

Hi Ludek,
Thanks so much for the quick reply. Unfortunately I did not have time to work on the reporting project Friday afternoon, but did a quick test this morning with some interesting results. I'm hoping if I describe what I'm doing, you can show me the error of my ways. This is really my first major undertaking with Crystal Reports.
If I simply load the report, then close and dispose, I don't hit the limit of 10 files. Note that I do not logon manually in my code as the logon parameters are all defined within the reports themselves. The logon happens when you actually view the report. Loading the report doesn't seem to actually log in to the DB.
What I did was create a very simple form with a single button that creates the WinForm class which contains the Crystal Viewer. It then loads the report, sets the ReportSource property on the CrystalReportsViewer object contained in the WInForm and shows the report. The report does show correctly, until the 10 reports limit is reached.
The relevant code is shown below. More than I wanted to post, but i want to be as complete and unambiguous as possible.
This code displays the same behavior as my earlier post (after 10 reports we are unable to create another connection to the DB).
// Initial Form that simply has a button
public partial class SlectReport : form
        public SelectReport()
            InitializeComponent();
        private void button1_Click(object sender, EventArgs e)
            ReportDocument rd = new ReportDocument();
            ReportForm report = new ReportForm();
            try
                rd.Load(@"Test.rpt");
                report.ReportSource = rd;
                report.Show();
         catch (Exception ex)
              MessageBox.Show(ex.Message);
// The WinForm containing the Crystal Reports Viewer
    public partial class ReportForm : Form
        public ReportForm()
            InitializeComponent();
        private void Form1_Load(object sender, EventArgs e)
            this.crystalReportViewer1.RefreshReport();
            this.FormClosed += new FormClosedEventHandler(ReportForm_FormClosed);
        void ReportForm_FormClosed(object sender, FormClosedEventArgs e)
            ReportDocument rd;
            rd = (ReportDocument)crystalReportViewer1.ReportSource;
            rd.Close();
            rd.Dispose();
        public object ReportSource
            set { crystalReportViewer1.ReportSource = value; }
Again, any guidance would be greatly appreciated.

Audit Report Fix (Manual Journal Entries for Inventory)

Hello!
Curious if anyone has been able to fix an inventory audit report using journal entries?
For example: if an item was on inventory account 1500 based on it's item group assignment, then say 20 items are received for $1 each, then 5 are sold at $1 then the item group is switched and now it has an inventory account of 1520 and 5 more items are issued out.
Running the audit report summarizing by accounts will show $15 as the balance in 1500 and -5 in 1520. So when we go to actually check the accounts to reconcile them at the end of a period, our inventory accounts are always off.
I have identified manual journal entries meant to 'fix' a GL account, but these have made the audit report basically unusable for reconciliation.
Is there a way to journalize a change in the inventory accounts while making the change occur in OINM as well??
I have looked through several expert empowerment sessions that acknowledge this as a problem, but do not offer any solutions.
Thanks!
Mike

Hi Mike:
Changing Item groups while inventory is on hand is a problem. I have found a way to correct this, but it is a multi step process. I would try this in DEMO first to make sure you get the proper results.
Try this.
Below is the procedure for correcting the G/L Accounts on your Inventory Audit Report It is complicated and needs to be performed when no other users are in the system. Journal entries will not correct this problem.
Here it is.
1.     Review Inventory Audit Report by Summarize by Accounts for the item.
2.     Do a Misc. Issue to remove the inventory.
3.     Review Inventory Audit Report again.
4.     Change the Acct # on the Item Group for the Inventory Item to match the negative value account number. CAUTION! Make sure that users are not performing transactions on the system when you do this.
5.     Do another Good Receipt for 1 each at price shown in Negative value account number. Enter as a positive number.
6.     Re-run the Inventory Audit to confirm that the negative account has been zeroed out.
7.     Change Item Group Inventory account to remaining positive value account number.
8.     Do an Inventory Issue for quantity of 1 each.
9.     Re-run the Inventory Audit Report for the item. All accounts should now have zero value.
10.     Change Item Group account setting back to correct account for future.
I hope it works for you.
Regards,
Vicki Smith

Work Flow for Manually Disabling Account and Reporting on Disabling Account

Hi All
THis is my First Time To Create Work Flow for Idm Project Please Help me
i want Work Flow for Manually Disabling Account and Reporting on Disabling Accounts
Please Tell me How I will have to start, to create the code, I know how to configure but may be I will use BPEL or Through Netbeans and plugin I will use.
please provide me sample code, so that I can start workflow work

Thats configurable buddy ! ! And possible in 10G and 11G both versions.
Functional Roles : These are the groups/roles in OIM 10g/11g with access policies attached at the backend.
- Create a dummy resource and name it Request Role or anything as you like. Attach an Object Form to it and have form field for Role Name, this would be a lookup type field linked to all OIM groups (leave system values using lookup query). So a user can select any OIM Group in this request as per configuration. Have approval workflows defined on this dummy resource Request Role and in its Provisioning Process make user/s a part of the requested group.
- Now once the user is made a part of the group, the associated access policy would be invoked automatically and thereby provisioning. The only thing you need to keep in mind is that create the access policy without approval (there is a check box). If you do this the approvals would never be invoked even if you assign a group manually to the user coz it suppresses all the approvals in this access policy.
IT Roles : These would be linked to the resource and you can define individual approvals on the resources as required.These approvals would be required if someone raises a request for these resources individually.
Thanks
Sunny

Aging report for Open Invoice

Hi All,
I need to develop an Aging report for open invoice, there is no indication for open invoice or close invoice since we are using customise DS and DS from third party system. only one key flag we have is clearing date. so kindly let me know how to write the logic for this requirement.. can I use Customer exit for this? I have an Idea to do like
first logic is
*If Clearing date = blank than invoice is = open (by using of this logic we can get all open invoice).
second logic
total number of invoice = current date - document date.
but I do not know how to implement this logic in BEx hnece kinnly advice me whether this logic can be work or suggest with different solution ples..
Regards,

hi,
You can check few default PO reports wid proper paramater in it
or
Can check table EKBE
or
Check PO history in the PO doc
Or
Check the ME80FN
Regards
Priyanka.P

Report for open process orders

Dear SAP experts,
As the period of the process order from open to close is not short, will take 1 or 2 months in our business case, so we want to find a report which can get the information just like the output of KSPP(for planned orders) .
I tried to analysis the logic of program KSPP, and it seems the function modules based on the planned orders only.
Is there any way to get the similar report for open process orders?
Many Thanks,
Lisa Yao

Is there any clues?

Report for Dunning

Hi Experts,
Any one has written report for Dunning.(F150)
Scenario: transcation code F150 can't be schedule; it's runs manually by users.
we need a report same as what F150 is doing so that we can schedule in job.
if any one knows report for dunning ? I know fot he payment F110, there is a sap report progarm but not for Dunning(F150).
Can anybody suggest me ??
Thanks in advnace for the help.
Regards,
Nupur

Hi Hemanth,
Customizing:
You can go the Transaction FBMP and add your Form name as well as the Print Program name.
These would be call when ever you run the dunning Program.
From the Layoutset yuo can use the PERFORM subroutine using and changing parameters which would have the Structure ITCSY.
The Form then needs to be present in the Driover Prpgram.
Please let me know if this is useful.
Regards,
Deepak

Firefox crashed when I restarted it to install plugins and the crash reporter is unable to submit a report for this crash. How can I submit this report?

# This file is in the UTF-8 encoding
[Strings]
# LOCALIZATION NOTE (isRTL):
# Leave this entry empty unless your language requires right-to-left layout,
# for example like Arabic, Hebrew, Persian. If your language needs RTL, please
# use the untranslated English word "yes" as value
isRTL=
CrashReporterTitle=Crash Reporter
# LOCALIZATION NOTE (CrashReporterVendorTitle): %s is replaced with the vendor name. (i.e. "Mozilla")
CrashReporterVendorTitle=%s Crash Reporter
# LOCALIZATION NOTE (CrashReporterErrorText): %s is replaced with another string containing detailed information.
CrashReporterErrorText=The application had a problem and crashed.\n\nUnfortunately the crash reporter is unable to submit a report for this crash.\n\nDetails: %s
# LOCALIZATION NOTE (CrashReporterProductErrorText2): The first %s is replaced with the product name (i.e. "Firefox"), the second is replaced with another string containing detailed information. These two substitutions can not be reordered!
CrashReporterProductErrorText2=%s had a problem and crashed.\n\nUnfortunately the crash reporter is unable to submit a crash report.\n\nDetails: %s
CrashReporterSorry=We're Sorry
# LOCALIZATION NOTE (CrashReporterDescriptionText2): The %s is replaced with the product name.
CrashReporterDescriptionText2=%s had a problem and crashed.\n\nTo help us diagnose and fix the problem, you can send us a crash report.
CrashReporterDefault=This application is run after a crash to report the problem to the application vendor. It should not be run directly.
Details=Details…
ViewReportTitle=Report Contents
CommentGrayText=Add a comment (comments are publicly visible)
ExtraReportInfo=This report also contains technical information about the state of the application when it crashed.
# LOCALIZATION NOTE (CheckSendReport): The %s is replaced with the vendor name.
CheckSendReport=Tell %s about this crash so they can fix it
CheckIncludeURL=Include the address of the page I was on
CheckSendEmail=Email me when more information is available
EmailGrayText=Enter your email address here
ReportPreSubmit2=Your crash report will be submitted before you quit or restart.
ReportDuringSubmit2=Submitting your report…
ReportSubmitSuccess=Report submitted successfully!
ReportSubmitFailed=There was a problem submitting your report.
ReportResubmit=Resending reports that previously failed to send…
# LOCALIZATION NOTE (Quit2): The %s is replaced with the product name.
Quit2=Quit %s
# LOCALIZATION NOTE (Restart): The %s is replaced with the product name.
Restart=Restart %s
Ok=OK
Close=Close
# LOCALIZATION NOTE (CrashID): The %s is replaced with the Crash ID from the server, which is a string like abc12345-6789-0abc-def1-23456abcdef1
CrashID=Crash ID: %s
# LOCALIZATION NOTE (CrashDetailsURL): The %s is replaced with a URL that the user can visit to view the crash details.
CrashDetailsURL=You can view details of this crash at %s
ErrorBadArguments=The application passed an invalid argument.
ErrorExtraFileExists=The application didn't leave an application data file.
ErrorExtraFileRead=Couldn't read the application data file.
ErrorExtraFileMove=Couldn't move application data file.
ErrorDumpFileExists=The application did not leave a crash dump file.
ErrorDumpFileMove=Couldn't move crash dump.
ErrorNoProductName=The application did not identify itself.
ErrorNoServerURL=The application did not specify a crash reporting server.
ErrorNoSettingsPath=Couldn't find the crash reporter's settings.
ErrorCreateDumpDir=Couldn't create pending dump directory.
# LOCALIZATION NOTE (ErrorEndOfLife): The %s is replaced with the product name.
ErrorEndOfLife=The version of %s you are using is no longer supported. Crash reports are no longer being accepted for this version. Please consider upgrading to a supported version.

I think you may have pasted the wrong thing into the Description.
To try and resubmit a pending report (for example if you lost your internet connection):
#Go to about:crashes in the location bar
#Click the latest report link to resubmit it
If there isn't a pending crash report listed, I'm afraid you may be out of luck for that crash report.

Vendor ageing report for down payment bucketwise

Hi
I have paid many downpayment to various vendors. Now i want the ageing report for the same (i.e. bucket wise i.e. 0-30 days, 31-60 days and so on).
This i am getting for vendor invoices in TCode: S_ALR_87012085 (Vendor payment history with OI sorted list).
Please let me know if the bucketwise report is possible for the downpayment too.

Hi,
Vendor ageing for down payments as well as invoice i use to see from T.code FBL1N by creating layouts.
Choose Arreas after net due date from layout and for that column you can apply a rule that from 0 to Lessthan or equal to 30.
Like that you can create the layouts. In FBL1N you can give this layout (down) so information come in that format.
The one disadvantage is that you have to select manually the layouts and you can see only one ageing information at a time.
Regards,
Sankar

Report for MRP PO

1. I want a report which diplays POs & PRs created through MRP & created manually. How?
2. Through Document type we can easily distinguish between the Purchase Requisitions that have been generated through MRP and those created manually. How?
Regards
VS

YOu can get the report for req created by MRP/Manually or any other criteria by using transaction ME5A
Use ME5A then from dynamic selection (On Maib screen color button) select the creation indicator by double clicking on it and entr the value B for MRP same way for any other REqs
This will give you the exact reports which you are looking for it so you don;t need to create the new document type for this purpose
rewards the points

Report for mass interruption of partially confirmed orders in PPDS?

Hi gurus,
our client has a lot of partially confirmed orders in the past, and this is giving us problems with the optimizer.
Is there a report for mass interruption of this orders?
We can do it one by one in the DS planning board, but there are too many!
would appreciate any help,
Pablo

Hi Pablo,
I would suggest you can close the partially confirmed orders at R/3 itself
so that it will update in APO via CIF.
There is delivery complete indicator in R/3 production/process order which
upon checking will close the order.
Regards
R. Senthil Mareeswaran.

Report for update of Material with deletion Flag from R/3 to SRM

Hi All,
           Is any report for Updating material in SRM with deletion indicator for those deletion flag set in R/3...

Check material status
IF mat_mmsta EQ '--'.
    lv_msgv1 = iv_ordered_prod.
    CALL FUNCTION 'BBP_PD_MSG_ADD'
      EXPORTING
        i_msgty       = c_msgty_e
        i_msgid       = 'BBP_PD'
        i_msgno       = 426
        i_msgv1       = lv_msgv1
      EXCEPTIONS
        log_not_found = 1
        OTHERS        = 2.
    IF sy-subrc <> 0.
      PERFORM abort.
    ENDIF.
    IF c_on = c_off.
      MESSAGE e426(bbp_pd) WITH lv_msgv1.
    ENDIF.
ENDIF.
if not mat_lvorm is initial.
    lv_msgv1 = iv_ordered_prod.
    call function 'BBP_PD_MSG_ADD'
program name LBBP_PDIGPF2R
Check material in backend
CALL FUNCTION 'META_MATERIAL_READ'
    EXPORTING
      i_mtcom        = ls_mtcom_eci
      logical_system = iv_log_system
    IMPORTING
      e_mmsta        = mat_mmsta
      e_lvorm        = mat_lvorm
    EXCEPTIONS
      mat_not_found = 1
      OTHERS         = 2.
IF sy-subrc <> 0.
    lv_msgv1 = iv_ordered_prod.
    lv_msgv2 = iv_plant.
    CALL FUNCTION 'BBP_PD_MSG_ADD'
      EXPORTING
        i_msgty       = c_msgty_e
        i_msgid       = 'BBP_PD'
        i_msgno       = 275
        i_msgv1       = lv_msgv1
        i_msgv2       = lv_msgv2
      EXCEPTIONS
        log_not_found = 1
        OTHERS        = 2.
    IF sy-subrc <> 0.
      PERFORM abort.
    ENDIF.
    IF c_on = c_off.
      MESSAGE e275(bbp_pd) WITH lv_msgv1 lv_msgv2.
    ENDIF.
ENDIF.
      EXPORTING
        i_msgty       = c_msgty_e
        i_msgid       = 'BBP_PD'
        i_msgno       = 345
      EXCEPTIONS
        log_not_found = 1
        others        = 2.
    if sy-subrc <> 0.
      perform abort.
    endif.
    if c_on = c_off.
IN SRM PROGRAM LBBP_PDIGPF2R BBP_PD 345 throws message "product x is designed for deletion"
but it is validationg from fm 'META_MATERIAL_READ'
please close this thread
br
muthu

Report for inactive vendors from past 2 years

Hi,
We have a request to create a report for the vendors who are not active for last 2 years. Can anyone please advise me the points I should keep in mind to consider a particular vendor inactive. eg. if a vendor has 0 balance in table LFC1 for last 2 years, will be considered as inactive but, that vendor could have some PO's activity on it in these 2 years, which are not appearing on FI side.
Please also tell me if there is a table to find open and close POs for vendors for last 2 years.
If anyone please advise, the points to keep in mind and important tables to refer for create this report.
Quick response will be appreciated.
Thanks & Regards

Hi,
Thanks for your prompt reply, Can you please tell me where is the parameter SALDO0 in report RFKSLD00.
Quick response will be appreciated.
Thanks & Regards

Actual line items report for multiple products

Hi All,
We have 4 manufacturing plants and 100 fg /sfg materials are being amnufactured for each of the plants.
Now we want to see the total actual cost incurred report for each of the fg/sfg materials for each plant in a single report.
Kindly share the report t. code in product costing.
Regards
Subbu

Hi,
Without ML/Actual costing, Actual cost per Product is not easy/possible! Otherwise, you could only attempt to get a cost close to Actual cost, as far as possible.
Hope this helps.

Report for manually close GRPO

Similar Messages

Maybe you are looking for