Report for outgoing service spare parts

Hi,
My client wants to have a report (gate pass or any proof for outgoing) for outgoing service spare parts for repair
Is there any provision to have a returnable gate pass for service orders where goods are taken away for repair and to be delivered back to the plant.
Pls suggest ur comments.

Hi,
You can do the Subcontracting scenraio for this service orders.
So while sending the spare parts to vendor create the Subcontracting PO with item category L
Send the parts in 541 mvt type to vendor.
In MBLB you will get the report with respect to vendor how many parts you have sent to the vendor with value if you maintained for that part in the material master.
rgds
Chidanand

Similar Messages

  • Report for Order and spare parts

    Hello every one, i am looking for a report which can tell me order number wise use of spare parts. It can be either in order or some seprate report. I have not find any such report till yet. Kindly help me in this.
    Regards
    Abhishek

    Baed on the requiremtns given, IW13 can also be auseful report for you.
    SM

  • MRP design for Service Spare Parts

    Hello,
    I am in process of designing the MRP run for service spare parts for construction and mining equipments business. There is a central warehouse and small depots.
    Help me out to design following MRP requirements.
    1.     MRP process is expected to consider stocks at all these locations i.e central ware house and depots. Optimization across locations and stock transfers to be considered.
    2.     MRP process is expected to consider open PO requirements.
    3.     MRP process is expected to consider in-house service orders reservations requirements.
    4.     MRP process is expected to consider open sales spare parts order demand from dealers.
    5.     Certain formula base forecast requirements for specific spare part
    If SAP standard solution is there or any work around is expected.
    Regards
    Sanjeev Dhavan

    1. MRP process is expected to consider stocks at all these locations i.e central ware house and depots. Optimization across locations and stock transfers to be considered.
    - MRP can be run for a whole plant or single material or MRP area(group together some storage location). I hope your warehouse is a plant so you can run the MRP at your plant(ware house) level.
    2. MRP process is expected to consider open PO requirements.
    - You should use consumption based planning but you need to identify what type of MRP you want to use.
        - reorder point planning     - forecast based planning      - time phased planning
        - in general all the above MRP will consider the open PO / PRs
    3. MRP process is expected to consider in-house service orders reservations requirements.
    -  this is possible by selecting proper MRP type, for ex. if you want to use reorder point planning, then you should use V1(Reorder point planning with external requirements) which includes sales order and manual reservation in net req calculation.
    4. MRP process is expected to consider open sales spare parts order demand from dealers.
    - Refer point 3
    5. Certain formula base forecast requirements for specific spare part
    - do you want to use forecast based MRP? what formula you want to use?

  • Report for Open Service Items

    Dear all ,
    I want a report , that shows only the items open for GR in service POs .
    I am using ME2S right now .
    Here I want to filter the items ON THE BASIS OF TRAFFIOC LIGHTS.
    How can this be done ??
    Regards
    Anis

    Check with  T-code  MSRV6

  • Custom report for SLA - service desk

    Hello,
    Untill now we are using solar_eval as our report tool for the SLA functionality in service desk management. But this report does not give all the information we want to have. So do we also like te have the average response times. Does anybody have a custom ABAP-report which we can use ??
    Regards,
    Gert-Jan van Holland

    Thankyou for your reply, but i cannot see any differences in CRM_DNO_MONITOR transaction and that should be shown the product right and i still got my "first respons time and date , completion time and date blank. ? i already activate the action. Please guide me what should i do next, after i activate the action.
    Many thanks
    dinie.

  • Standard SAP reports for detailed Service Entry Sheet data

    Hi All,
    I am searching for standard SAP reports to extract the detailed Service Entry Sheet data out of SAP. For example, I need the deailed information like Service Entry Sheet Number, Purchase Order Number, PO line item number, short text, Posting Date, External Number, Service number, Quantity, Gross Price, Cost Object (Order or Network or WBS), Personal Number (if applicable), workday. I couldn't find any standard report. So if anyone know it, please help me.
    Thanks,
    Ting

    Hi,
    In ME2S also you can get good report by execution and by clicking SO/ PO number.( where cost object can be viewed)
    If you are very much specific, go for development
    Regards,
    Biju K

  • Report for unreleased service entry sheet

    Hi All
    Is there any report where I can get list of service entry sheet numbers which are yet to be completely released.

    Hi,
    Use t.code ML85 and select the round box of Not Accepted under Acceptance Indicator  TAB and execute and get list of unreleased SES under release code.
    Or Go for a development with help of ABAPer.
    Regards,
    Biju K

  • UCCX printable reports for Contact Service Queues displaying old data

    Hello,
    Does anyone know how to remove old data from the printable reports? I am trying to view all users listed under specific CSQs and it returns old data of users that are no longer in our system.
    -Ben

    Walter,
    Thanks for the suggestions. We are running version 8.5.1.11002-22. I strictly deal with the UCCX side of things and spoke with the CUCM admin. He advised that the extension is still active because we are forwarding all of the calls for now. Once he removes it I am sure that the name will disappear from the printable reports. If it does not disappear, you will see me posting again.
    Thanks Walter.
    -Ben

  • In house repair - Maintaining template for Spare parts & Services

    Hi,
    After creating an item of type "Diagnostics", I want to  choose additional "Repairs+Spare Parts" .
    Where can I maintain this template so the Spare Parts get proposed.
    Thanks,

    Hi,
    If you want the repairs and spare parts to be proposed by the system, then you need to maintian them in the respective relationships of the main product.
    Maintain the relevant services and spares in the relationship (Services / Spare Parts) of the main product and try to create a new order and check.
    Regards,
    PP

  • What is best practice for dealing with Engineering Spare Parts?

    Hello All,
    I am after some advice regarding the process for handling engineering spare parts in PM. (We run ECC 5)
    Our current process is as follows:
    All materials are set up as HIBE's
    Each material is batch managed
    The Batch field is used for the Bin location
    We are now looking to role out PM to a site that has in excess of 50,000 spare parts and want to make sure we use best practice for handling the spare parts. We are now considering using a basic WM setup to handle the movement of parts.
    Please can you provide me with some feedback on what you feel the best practice is for dealing with these parts?
    We are looking to set up a solution that will us to generate pick lists etc and implment a scanning solution to move parts in and out of stores.
    Regards
    Chris

    Hi,
    I hope all the 50000 spare parts are maintained as stock items.
    1. Based on the usage of those spare parts, try to define safety stock & define MRP as "Reorder Point Planning". By this, you can avoid petty cash purchase.
    2. By keeping the spare parts (atleast critical components) in stock, Planned Maintenance as well as unplanned maintenance will not get delayed.
    3. By doing GI based on reservation, qty can be tracked against the order & equipment.
    As this question is MM & WM related, they can give better clarity on this.
    Regards,
    Maheswaran.

  • ME2N report for Services

    Hi,
    How do i get the report for OPEN SERVICE LINE PO in Item Detail wise.
    For example,i have one activity in Item Overview screen,and giving order unit AU and qty 1no.
    But in Item detail, i maintain 2 servcie line items for qty 20nos and 30nos respectively and values.
    In item overview screen,whole value appears and also in report-ME2N,but qty in report appears as 1no.
    In To Be delivered column in report,zero qty appears-even though SES not made
    Please explain.
    Regards

    hi
    use code MSRV6
    or in ME80Fn choose shift+F4
    then in item choose the item cat and acct assignment
    and excecute then see the po histry mode here u will see all the transactions happened with the po
    regrds
    kunal

  • Cost Report for service order

    Hi All,
    How to take out a cost report for a service order? like my requirement is how the cost of a Service Order  is hitting to which cost center and profit center and company code and posting of the concerned GL along with the activity type.for example i have a service order where some activity is there with various hours all togather 25 hrs, how this is costed and posted in whic cost center and GL and Porfit center along with the rate.
    Thanks,
    Prasad

    Please, try transaction KOB1.  You also should be able to drill-down to line items with a partner object view.

  • Forecasting the need of spare parts in Demantra

    Hello everyone,
    I would really appreciate if anyone who's had dealt with the following issue help us,
    The thing is - we want to forecast 3 different kind of items:
    1. Main items we sell - for examples - machines.
    2. Accessories for machines we sell. A certian accessory can be used with several type of machines. (Cables, Batteries etc.)
    3. Spare parts we need to keep in stock in order to provide repair services for our customers.
    Each machine we sell has a different set of spare parts used when repairing.
    The forecast for machines is a typical demantra model forecast.(sales forecast by the book).
    My question is regarding the forecast for the spare parts we need for repairs.
    We know that demand for a certain spare part is influenced by how many machines which use that part were sold to customers.
    Also - it depends how common is the use of that part when fixing those machines that need service.
    (some parts get broken more frequently etc).
    Also since we provide fixed price insurance for customers, they dont "see" spare parts price as a factor.
    (they dont naturally "buy" the parts).
    How can demantra tie the forecast for the spare part to sales history of machines? Can demantra forecast service ?(which behaves alot different than sales). It is obvious that forecasting demand for spare parts with looking only at each part's history will not provide best forecast results.
    Any insights anyone?
    I'm pretty sure most implementations faced that issue - regarding the forecast of parts for service -
    Would appreciate any reply,
    Thanks alot,
    Aaron.
    Edited by: user10894682 on 07:30 05/02/2009

    Hi Aaron,
    Per my understanding,you sell machines as well as their accessories.So forecasting for them is by the book where you would be using the demand for machine as well as for accessories..
    As far as the service parts' forecasting is concerned, Oracle has a seperate module for Service & Spare parts planning based on Demantra's forecasting engine.
    Spare Parts Planning(SPP) has the following features:
    1. Forecast accurately with built in Demantra's Forecasting engine
    2. Replenish spares based on Single plan model
    3. Distribute spares using SPP's plan
    4. One single UI to carry out all 3 above processes for improved productivity
    5. Forecasting based on Shipments, Spares Usage, and Returns
    6. Plan based on Service parts failure rates calculations
    7. Integrated with various APS modules like Demantra DM, CP, IO, and ASCP.
    From demantra's perspective you may try out the following:
    Since you provide fixed price insurance for customers,you would definitely be keeping track of the service provided like what spare was replaced and probably how many of the same spare have been replaced for a particular customer over a period of time. Also as per the insurance you must have specified that a particular spare would be replaced only x number of times within a span of say 6 months or 12 months.
    You may utilize these information to classify the spares based on the frequency of use viz. very frequent, medium frequent and less frequent and associate some factor to it.You can club this information as well as the spare parts demand coming out of the BOM (bill of material) of the machine along with each part's history and come up with a forecast that can be more relied upon.
    I hope this helps.
    Regards,
    Shekhar

  • Query For OutGoing Excise Invoice

    Hi Experts,
    I need to run areport for  OutGoingExcise Invoice.
    So pls give me a query to capture all the taxes related to that invoices like BED,EDCess,HECess. and VAT.
    Thanx in Advance,
    Regards,
    Vamsi.

    Hi Guys...
    Below is the query i used to run the report for OutGoing Excise Invoice.
    I need some modifications in this query.
    We are having two branches Branch1 and Branch2.
    While running the query we need to pay Excise duty for both the branches seperately,So i need to run a report for branchwise.
    So pls give me some solution.
    SELECT M.DocNum AS 'INV No. #', M.DocDate as 'Date', M.CardName as 'Customer Name',
    (Select Sum(LineTotal) FROM OEI1 L Where L.DocEntry=M.DocEntry) as 'Base Amt.(Rs.)',
    (SELECT Avg(TaxRate) FROM OEI4 where statype=-90 and DocEntry=M.DocEntry) as 'ED %',
           (SELECT Sum(TaxSum) FROM OEI4 where statype=-90 and DocEntry=M.DocEntry) as 'ED (Rs.)',
    (SELECT Avg(TaxRate) FROM OEI4 where statype=-60 and DocEntry=M.DocEntry) as 'EDCS %',
           (SELECT Sum(TaxSum) FROM OEI4 where statype=-60 and DocEntry=M.DocEntry) as 'EDCS (Rs.)',
    (SELECT Avg(TaxRate) FROM OEI4 where statype=-55 and DocEntry=M.DocEntry) as 'HECS %',
           (SELECT Sum(TaxSum) FROM OEI4 where statype=-55 and DocEntry=M.DocEntry) as 'HECS (Rs.)',
    M.WTSum AS 'TDS (Rs.)',
    M.DocTotal as 'Total (Rs.)'
    FROM OOEI M LEFT OUTER JOIN OEI1 L on L.DocEntry=M.DocEntry
    LEFT OUTER JOIN OEI4 T on T.DocEntry=L.DocEntry and L.LineNum=T.LineNum
    LEFT OUTER JOIN OEI5 J ON M.DocEntry = J.AbsEntry
    LEFT OUTER JOIN OEI3 Q ON M.DocEntry = Q.DocEntry
    WHERE (M.DocDate >= '[%0]' AND M.DocDate <= '[%1]')  AND
    GROUP BY
    M.DocNum,M.DocDate,M.CardName,M.NumAtCard,M.DocEntry,M.DiscSum,M.WTSum,M.DocTotal
    ORDER BY
    M.DocNum,M.DocDate,M.CardName,M.NumAtCard,M.DocEntry,M.DiscSum,M.WTSum,M.DocTotal
    Regards,
    Vamsi.

  • On Plus support for Voice services

    Hi Friends,
    I am trying to explore use of onplus for Config, Monotoring and reporting for voice services (example UC50,ISR with CME/CUE cards as well as use of SRST).
    Could you please sugget any documentation I can refere for this req.
    Suresh

    Hi Suresh,
    The UC500 is a supported device. Please see this link for a feature summary of supported Cisco devices with OnPlus:
    https://supportforums.cisco.com/docs/DOC-17501
    Currently, we do not have any monitoring or reporting specific to voice services. The standard monitoring and reporting available for any device may be applied. In a future release, we may have additional voice features.
    Thanks,
    The OnPlus Team

Maybe you are looking for