Report generation microsoft tools missing in LV 8.5.1

I upgraded LabView from 8.5 to 8.5.1 and installed all of the toolkits. all of the toolkits seem to be working except for the report generation toolkit as the menu doesn't show any of the word or excel options.
Has anyone else had this problem?

Hi there,
I had this problem too. But fortunately others had posted their problems to various message boards and I was able to solve it easily.
I didn't try Andrey's method. (It may be faster)
I went into Windows control panel --> Add/Remove Programs --> National Instruments. When you select that, another menu opens so that you can select which component to remove. I uninstalled the Report Generation Toolkit and then re-installed. Worked just fine.
Patrick Allen

Similar Messages

Excel Graph Legend Formatting - Report Generation Tool

Hi all,
I'm currently using the Report Generation Tool for Labview '11 and cannot seem to figure out how to edit the font properties for a graph's legend. Attached is a screenshot of an example output.
The Excel Graph Font.vi's Help file says that it should be able to modify the legend, yet I can't seem to figure out how to configure it to do so. If anyone can walk me through the steps or tell me what I am missing, I'd greatly appreciate it.
Solved!
Go to Solution.
Attachments:
excelLegend.png ‏33 KB

ChaoyD wrote:
Hello again,
It seems my team has decided to change direction and use Word instead of Excel. As such, I've been attempting to convert the VI ben64 provided, but I'm stuck on the ActiveX references... I've attached what I've done so far, but could someone help me (or instruct me) on making this VI work with Word?
Thanks.
The Word object model is probably the most complicated of the Office suite and you are loosing the calculation ability of Excel.
Attached is a vi to format the chart legend in a Word document.
Ben64
Attachments:
Word Format Graph Legend.vi ‏26 KB

Install of Report Generation Toolkit without Microsoft Office previously installed.

After installing "LabVIEW Report Generation Toolkit for Microsoft Office Version 1.1.3" on a computer without Microsoft Office I noticed that the Report Generation VI palette does not include the "Excel & Word" specific VI's, even though I have "Excel & Word" installed. Is there any way to "activate" those VI's without installing "Microsoft Office?" If the answer is no and I do install "Microsoft Office" will those VI's become available on the Report Generation VI palette? Or will a reinstall of the "LabVIEW Report Generation Toolkit for Microsoft Office Version 1.1.3" be required?
Message Edited by St. Pete SAIC on 06-17-2009 08:01 PM

St. Pete SAIC wrote:
After installing "LabVIEW Report Generation Toolkit for Microsoft Office Version 1.1.3" on a computer without Microsoft Office I noticed that the Report Generation VI palette does not include the "Excel & Word" specific VI's, even though I have "Excel & Word" installed. Is there any way to "activate" those VI's without installing "Microsoft Office?" If the answer is no and I do install "Microsoft Office" will those VI's become available on the Report Generation VI palette? Or will a reinstall of the "LabVIEW Report Generation Toolkit for Microsoft Office Version 1.1.3" be required?
Message Edited by St. Pete SAIC on 06-17-2009 08:01 PM
OK any question? Install the specific Office version and if that doesn't change the registery keys that NI is depending on reinstall the LV Add-on. Of course NI, software tool-kits check registered software! Why install a "for Office" package that is unusable or (worse from a litigation point) includes functionality for unlicensed or pirated "Office" installations. Again- "*xx For (R) Office xx*" means they have gone through some licensing agreement.
Jeff

National Instruments releases LabVIEW Report Generation Toolkit for Microsoft Office.

The new LabVIEW Report Generation Toolkit for Microsoft Office is a library of flexible, easy-to-use tools for programmatically creating and editing Microsoft Word and Excel reports from LabVIEW. Whether you need to generate reports summarizing manufacturing test results or compile process statistics to improve your production yields, this toolkit speeds your development of customized, professional reports.
To see examples of this toolkit or get more information please visit :
http://www.ni.com/labview/report_gen_toolkit.htm

It is a bit limiting though. I built my own set of VI's, a toolkit if you will, that does some of what this tookit does. But, I also wrote some functionality that isn't available in NI's kit, such as creating charts as separate worksheets and linking the charts to data on another worksheet. All in all, the toolkit is great, but you can't get as much out of it as you can using the ActiveX calls yourself.

Report Generation Toolkit missing VI

LabVIEW version 8.6.1
Report Generation Toolkit 1.13
I have just started work on an ongoing project that others have been contributing to for some time. (Hence the project being in older versions of LabVIEW)
On my PC, I am apparently missing the VI "Word Get ActiveX References.vi"
I do have the version 1.13 of the toolkit installed, just as every other machine that runs this code does. But my word.llb does not contain that VI
I have tried simply copying that VI into the .llb The VI is then found by the application. But is not executable due to this error: This VI is connected with a library that does not include the VI. The VI might have been deleted from the library. Add the VI to the library again or select File»Disconnect from Library.
I have also tried replacing my entire C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\addons\_office\ directory with files from a PC that was working. Again, I get the same error as above.
I did attempt to do a repair on my installation of the toolkit. But as far as I can tell, this didn't do anything.
I also tried simply reinstalling the toolkit. But since it was already installed, it did nothing. I am hesitant to uninstall and reinstall the toolkit for fear of breaking all of my 8.6 projects, as well as possibly my 2009 projects. I wouldn't think it mess with my 2009 installation. But I do know that the order in which things are installed can be critical in system with multiple versions. I'm not sure if this applies to toolkits or not.
This PC also has an installation of LV 2009 SP1, and that version also has the Report Generation Toolkit installed. (although it is a different revision of the toolkit than 1.13)
I know that in the past, multiple versions of this toolkit were not compatible, meaning only one installed version of LabVIEW could have a working Report Generation Toolkit installed. But I was of the understanding that this was no longer a problem. Although it may not be a coincidence that neither of the other development boxes running this code do not have LV 2009 installed.
Has anyone else ever run into a similar problem and found a solution?
Thanks.
Patrick Allen
Solved!
Go to Solution.

Darren wrote:
Back before we unified the LabVIEW and toolkit version numbers (in 2009), there were cases where we didn't change the version number in the registry for one reason or another on a minor upgrade.
Ah. This makes sense then.
I just reinstalled said toolkit from said SSP DVD and although it did tell me that I was about to install 1.1.4, MAX still thinks it's 1.1.3
...except that now I do have the missing VI. This is a good thingTM
I still wonder how it ended up missing, because I'm really sure this is where I installed the toolkit from in the first place. I'll probably never know for sure. But that's a lot easier to take when the code is working.
Thanks!
Message Edited by pallen on 04-15-2010 04:52 PM
Patrick Allen

How to obtain the table index in word use LabVIEW Report Generation Toolkit for Microsoft Office

I created a word templete and it had several tables. When I use the "Word Edit Cell" function in LabVIEW Report Generation Toolkit for Microsoft Office, the function need "table index", and I didn't find any function to get or set the table index in word document. How can I achieve my attention to write value to specified table cell using the "Word Edit Cell" function?
Thanks for reply!
YangAfreet

Hi yangafreet
You do not need to get the table index for the word edit cell.vi from anywhere. LabVIEW will automatically index all the tables in the document. See the attatched vi for an example.
Rich
Attachments:
Table Edit.vi ‏23 KB

Report generation tool kit for vista

Where can we get report generation tool kit software(for vista Operating system) link .one of my friend has given me that software.He said he had got it from internet.can anyone give me the link so that I can download report generation toolkit software (for vista)
Thanks
kiranmayi

Hi Kiranmayi,
You can download Report generation toolkit from the following weblink:
https://lumen.ni.com/nicif/us/evaltlktrepgen/content.xhtml
or you can send a mail to [email protected] stating your full address and your requirement and we can send you evaluation DVD for free.
Thanx
Gaurav

Report generation tool kit not printing

I had the report generation tool kit version 1.01 for some time but never used it. I was comfortable with printing front panel vi 's.
But now I installed it on my computer with a windows 2000 and LabView 6.02 .
I created an application (executable) that will print (using the report
genartion tool kit). The application works fine in my development computer
(win 2000).
When I installed it on another computer with a win 2000, it prints as
expected
but when I try to exit I get a message from windows that the application is not responding (I have to go to task manager and terminate the application).
Both computers have word and Excell installed
I installed the application on a third computer (win 2000), but this com
puter does not have word or excell installed. The application does not print the
portion of the software that uses the report generation tool kit, but it can print the front panel of vi's (set to print an end of excution).
In all 3 computers, I have runtime engine 6.02 installed. My vi is simply
the example vi ""Sample test report.vi"", but customized to my application, printing standard report.
What is happening ?

Based on what you sent, the version of Excel and Windows that are being used is a non issue since none of the code makes any calls to either one. They all refer to the older version of the report generation VIs that use NI's proprietary report generator.
I can think of two explainations. First, you aren't using what you think you are. Second, NI retained the same VI names when they went to the Word/Excel version of the generator, and I am linked into the old version.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

LabVIEW Report Generation Toolkit for Microsoft Office

Hi!
One question. I have bought the LabVIEW Report Generation Toolkit for Microsoft Office
Version 1.0a and am trying to install it under Labview 7.1 but the installation stops with the error: "you need a Labview Version 6.0 runtime engine." Is there any possibility to install the toolkit anyway?
Regards
Stefan

Hi
You can try to update your Version 1.0 to Version 1.0.1. Then it should be working.
Here ist the link for the free update:
http://digital.ni.com/softlib.nsf/websearch/19003CF70BB8A57186256E5A00672E2A?opendocument
if it not works you can try to install the runtime engine 6.0 on your system. her is the link:
http://digital.ni.com/softlib.nsf/websearch/D5F11A64A905DB27862569EC005E31E2?opendocument&node=132070_US
Regards
Manuel

Problem with Reporte Generation Toolkit for Microsoft Office 2010

When I use the Report Generation Toolkit (LabVIEW 2010), and Office 2010, the tables generated are bad.
In office 2007 in the tables are correct.
Someone can help me solve this problem?

The solution referenced in your post does not actually workas far as I can tell... at least for LV2011 and Office2010 on Win7
Am I missing something here?
Attachments:
Testbench_ReportGen Table_BUG.vi ‏10 KB

Add Report Generation toolkit for Microsoft Office in exe

Hi
I am having a problem. I am using LabVIEW 8.20, Report Generation Toolkit for Microsoft Office 1.1.2 and Microsoft Excel 2003. My OS is Windows XP (SP )
I want to build the vi attached below into an exe. The vis that I used are from addons>>_office>>excel.llb. I follow the suggestion found in the link below and add in all the files in excel.llb into my project so that it can be added into the executable as dynamic vis. However, some vis in excel.llb cannot be added into my project. After I have add all vis that can be added into the project, I build an application (exe) with the vi below as the Main vi and all other added vis (from excel.llb) as dynamic vis. After that, I build and run this exe on the same PC. I am unable to run it.
This vi will save datas when I click on the stop button. After I click on the stop button, a window will pop-up and prompt me to select which directory to save the vi. When I run the exe, I type in test.xls (for example) but the file saved is a picture and not an excel file. If I just run the vi instead of the exe, Excel will open and datas and graph will be displayed in Excel.
May I know where did I done wrong??
How do I use the Report Generation Toolkit in an executable with Microsoft Excel?
http://digital.ni.com/public.nsf/websearch/C38CE3F30542D65B86256F0E00740DD8?OpenDocument
Thank you & Regards
Lee
Attachments:
Self-Regulating.vi ‏132 KB
Untitled Project 1.zip ‏3841 KB

Hi centerbolt,
Thank you for your reply. I have tried adding in just that dynamic vi found in Excel Library and my main vi but it still cannot work. Is there anything that I need to look out as well?? [View attached picture.]
Thank you & Regards
Lee
Attachments:
added.JPG ‏92 KB

LV Report Generation Toolkit for Microsoft Office says "This VI or item belongs to a library that is expired or invalidly licensed"

I have downloaded the LV Report Generation Toolkit for Microsoft Office for evaluation with LabVIEW 2010. The examples for the Help get many errors, including "The subVI is not executable. You must fix all errors in the subVI before this VI can run." and "This VI or item belongs to a library that is expired or invalidly licensed".
I selected that I wanted to evaluate the toolkit instead of putting an activation code during installation. Installation went OK.
How can I get the examples in this LV Toolkit to Run so that I can evaluate it?
Solved!
Go to Solution.

Also when I place the MS Office Report function in my block diagram, I get: "Unable to View Properties" popup message and no Contextual Help on the function.
How can I get these RGT function to work properly so that I can evaluate the toolkit?

請問在NI網站上有NI LabVIEW Report Generation for microsoft office V 1.1.2

NI 網站上提供Report Generation for microsoft office 版本為1.1.3
可是我用的Lab View是8.0版，不適用。
找了許久都沒看到有1.1.2。

舊的正版軟體不會放在網站上，請洽業務部

Pareto Chart using Report Generation Tool kit

Hi,
Please help me to get clarification for the following:
I need to log data into MS Excel Report and generate Pareto Chart using LabVIEW for the Logged data.
I have Report Generation Tool kit. but i couldnt find the an option to generate Pareto chart with it.
Thanks,
Thirumala.

One way is to Create a Excel template in the predefined format with the rows/colums linked for the Chart.
Use this template with report generation toolkit to populate data in the predefined cells.Based on that the chart will be automatically updated.

I have problem with running excel macro in report generation tool kit

I am trying to use Excel Run Macro.vi but run into a problem: Exception occured in Microsoft Excel, The macro 'personal.xls!Macro1' cannot be found.. Help Path is C:\Program Files\Microsoft Office\Office\1033\xlmain9.chm and context 0 in Excel Run Macro.vi->example.vi
Also I tried to save the macro under the file that is active and I get the same results.
I saved the macro as *.bas file and ran it using Excel Import Module and did not see any erreos and it did not do anything.
Where a re some god examples that use the excel marco feature using the new report generation vis?

masoud,
Try this example out and let me know if you have any more questions. Also, this is in LabVIEW 6.1 format. If you need it in a different format, please let me know.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask
Attachments:
Module1.bas ‏1 KB
TestAddMacro.vi ‏34 KB

Report generation microsoft tools missing in LV 8.5.1

Similar Messages

Maybe you are looking for