Report giving error after 10g upgrade

We have a custom report which is erroring out after 10g upgrade. Following is the log file-->
**Starts**24-APR-2009 04:11:21
ORACLE error 3113 in FDPSTP
Cause: FDPSTP failed due to ORA-03113: end-of-file on communication channel
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P
APP-FND-01564: ORACLE error 1000 in AFPGRG
Cause: AFPGRG failed due to ORA-01000: maximum open cursors exceeded.
The SQL statement being executed at the time of the error was: &SQLSTMT and was executed from the file &ERRFILE.
Start of log messages from FND_FILE
End of log messages from FND_FILE
ORACLE error 3114 in AFPRSR-Resubmit_Time
Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R.Status_Code, P.A
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected to ORACLE
Contact your system administrator or support representative.
Shutting down Concurrent Manager : 24-APR-2009 04:11:51
ORA-01041: internal error. hostdef extension doesn't exist
ORACLE error 3114 in AFPRSR-Resubmit_Time
Cause: AFPRSR-Resubmit_Time failed due to ORA-03114: not connected to ORACLE
The SQL statement being executed at the time of the error was: SELECT R.Conc_Login_Id, R.Request_Id, R.Phase_Code, R
List of errors encountered:
_ 1 _
Routine AFPCMT encountered an ORACLE error. ORA-01041: internal error.
hostdef extension doesn't exist
Review your error messages for the cause of the error. (=<POINTER>)
_ 2 _
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
to ORACLE
Contact your system administrator or support representative.
_ 3 _
Routine AFPPRD has encountered a fatal error. ORA-03114: not connected
to ORACLE
Contact your system administrator or support representative.
However the alert log has following-->
Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []
I already increased the cursors from 700 to 900
How to fix it?

Hi,
However the alert log has following-->
Errors in file /u07/fatstdb/10g/admin/FATST_fatstdb/udump/fatst_ora_10468.trc:
ORA-07445: exception encountered: core dump [qercoStart()+156] [SIGSEGV] [Address not mapped to object] [0x00000087D] [] []Refer to the lookup to get more details about this error.
Note: 153788.1 - Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=153788.1
I already increased the cursors from 700 to 900
How to fix it?Is it possible to increase OPEN_CURSORS to a higher value? Enable trace on this concurrent program, and see if this collects more details about the error.
Regards,
Hussein

Similar Messages

Abldxml giving error after R12 upgrade

Hi,
As a part of R12 upgrade, I'm running adbldxml.pls and it's giving following error.
$ perl adbldxml.pl
Starting context file generation for db tier..
JRE_TOP not found at its desired location /db01/opt/oracle/product/11.1.0_egebc2d/appsutil/jre
Restart adbldxml.pl with value for jtop as an necessary argument$

JRE_TOP not found at its desired location /db01/opt/oracle/product/11.1.0_egebc2d/appsutil/jre
Restart adbldxml.pl with value for jtop as an necessary argumentPass JRE_TOP as a parameter when you run "perl adbldxml.pl" command.
Thanks,
Hussein

Airport Extreme giving errors after upgrading to ML Server

With OS X Server, your machine sees your Airport Extreme and can then configure it by opening ports, etc. once you turn on services. I upgraded from OS X Lion Server to ML Server and everything was fine for a second. Now whenever I click on the Extreme in the panel, I get the following error:
The error occurred while processing a command of type 'getIGDPortmaps' in plug-in 'servermgr_network'.
In Console, this error pops up:
7/26/12 9:01:12.036 PM Server[4546]: Error: The server '10.0.1.250' reported an error while processing a command of type: 'getIGDPortmaps' in plug-in: 'servermgr_network'. Error: Error Domain=com.apple.Keychain Code=-25300 "The operation couldn’t be completed. (com.apple.Keychain error -25300.)"
I've got in and deleted all the keychain passwords having to do with the Basestation and I still get the same error. Right now, I put Ser

I don't know if this will help but here's what happened today.
While I was out of the house, I wanted to see if the VPN connection was still active and working on my phone. It told me that it couldn't log in so no big deal. I figured I'd check it when I got home.
I got home and checked the Server settings for VPN and sure enough, it was off. I turned the VPN setting to ON and let it write its information. I then went to the AEBS tab on the left pane and it asked me for the password. Once I put in the password for the AEBS, it worked just fine.
So far what I've done was erase any Keychain passwords related to the AEBS and turned on VPN service to get it working. Don't know if that'll work for everyone else but hopefully it does. Seems it's a tiny bug that should be stomped out rather quickly as it's a huge piece of OS X Server.

Problem with EBS 11.5.10 after 10g upgrade

hi,
i have upgraded my oracle databse from 9.2.0.5 to 10.2.0.3 , my EBS version is 11.5.10, platform is HP UX 11.11
after sourcing env file on new 10 g home
i ran
perl adbldxml.pl tier=db appsuser=apps appspasswd=pasword
and then
adconfg .sh contextfile=path appspass=password
but it exited with an error
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /oradvp/ora/proddb/9.2.0/Apache/perl/bin/perl -I /oradvp/ora/proddb/9.2.0/Apache/perl/lib/5.00503 -I /oradvp/ora/proddb/9.2.0/Apache/perl/lib/site_perl/5.005 -I /oradvp/ora/proddb/9.2.0/appsutil/perl -I /oradvp/ora/proddb/10.2.0/appsutil/perl /oradvp/ora/
proddb/10.2.0/appsutil/scripts/DVP_test
adchknls.pl INSTE8_SETUP 1
AutoConfig is exiting with status 1
The log file for this session is located at: /oradvp/ora/proddb/10.2.0/appsutil/log/DVP_test/01201440/adconfig.log
~
~
~
~
~
i checked perl5lib
echo $PERL5LIB
/oradvp/ora/proddb/10.2.0/perl/bin:/oradvp/ora/proddb/10.2.0/perl:/oradvp/ora/proddb/9.2.0/Apache/perl/lib/5.00503:/oradvp/ora/proddb/9.2.0/Apache/perl/lib/site_perl/5.005:/oradvp/ora/proddb/9.2.0/appsutil/perl
echo $PATH
/oradvp/ora/proddb/10.2.0/perl:/oradvp/ora/proddb/10.2.0/bin:/oradvp/ora/proddb/9.2.0/Apache/perl/bin:/oradvp/ora/proddb/9.2.0/bin:/usr/ccs/bin:/usr/sbin:/oradvp/ora/proddb/9.2.0/jre/1.4.2/bin:/usr/bin:/etc:/usr/bin/X11:/usr/local/bin:/opt/bin:/usr/bin:/opt/perl5:/opt/j
ava1.3/bin:/opt/softbench/bin:/usr/bin:/usr/ccs/bin:/usr/contrib/bin:/opt/ansic/bin:/opt/ipf/bin:/opt/hparray/bin:/opt/nettladm/bin:/opt/upgrade/bin:/opt/fcms/bin:/opt/resmon/bin:/opt/pd/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/graphics/common/bin:/opt/gnome/bin:/opt/
mozilla:/opt/mx/bin:/opt/ignite/bin:/var/opt/netscape/servers/shared/bin:/var/opt/netscape/servers/bin/slapd/server:/var/opt/netscape/servers/bin:/usr/sbin/diag/contrib:/opt/java1.4/jre/bin:/opt/spb/bin:/opt/wbem/bin:/opt/wbem/sbin:/opt/aCC/bin:/opt/langtools/bin:/opt/i
make/bin:/opt/hpnpl//bin:/opt/sanmgr/commandview/client/sbin:.
$
and when i run this
$ which perl
/oradvp/ora/proddb/9.2.0/Apache/perl/bin/perl
it gives a path of old 9i home , how do i change it
i am not able to see the error
can any one help me with it
Edited by: Adroit77 on Jan 20, 2009 1:55 AM

hello sir,
ur solution worked for me but when i tried upgrading again with patch set 10.2.0.4
during adconfig , it gave the following error
AutoConfig Error Report]
he following report lists errors AutoConfig encountered during each
hase of its execution. Errors are grouped by directory and phase.
he report format is:
<filename> <phase> <return code where appropriate>
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /oradvp/ora/proddb/10.2.0/appsutil/install/DVP_test
afdbprf.sh INSTE8_PRF 1
AutoConfig is exiting with status 1
when i ran afdbprf.sh
it gave this error
afdbprf.sh started at Fri Jan 23 18:45:51 IST 2009
The environment settings are as follows ...
ORACLE_HOME : /oradvp/ora/proddb/10.2.0
ORACLE_SID : DVP
PATH : /oradvp/ora/proddb/10.2.0/perl/bin:/oradvp/ora/proddb/10.2.0/perl/bin:/oradvp/ora/proddb/10.2.0/bin:/usr/ccs/bin:/usr/sbin:/oradvp/ora/proddb/10.2.0/jre/1.4.2/bin:/usr/bin:/etc:/usr/bin/X11:/usr/local/bin:/opt/bin:/usr/bin:/opt/perl5:/opt/java1.3/bi
n:/opt/softbench/bin:/usr/bin:/usr/ccs/bin:/usr/contrib/bin:/opt/ansic/bin:/opt/ipf/bin:/opt/hparray/bin:/opt/nettladm/bin:/opt/upgrade/bin:/opt/fcms/bin:/opt/resmon/bin:/opt/pd/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/graphics/common/bin:/opt/gnome/bin:/opt/mozilla:/
opt/mx/bin:/opt/ignite/bin:/var/opt/netscape/servers/shared/bin:/var/opt/netscape/servers/bin/slapd/server:/var/opt/netscape/servers/bin:/usr/sbin/diag/contrib:/opt/java1.4/jre/bin:/opt/spb/bin:/opt/wbem/bin:/opt/wbem/sbin:/opt/aCC/bin:/opt/langtools/bin:/opt/imake/bin:
/opt/hpnpl//bin:/opt/sanmgr/commandview/client/sbin:.
LD_LIBRARY_PATH : /oradvp/ora/proddb/10.2.0/lib32:/oradvp/ora/proddb/10.2.0/lib:/usr/dt/lib:/usr/openwin/lib:/oradvp/ora/proddb/10.2.0/ctx/lib
Executable : /oradvp/ora/proddb/10.2.0/bin/sqlplus
SQL*Plus: Release 10.2.0.4.0 - Production on Fri Jan 23 18:45:52 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-12504: TNS:listener was not given the SID in CONNECT_DATA
ERRORCODE = 1 ERRORCODE_END
but i am able to connect to oracle DB using apps user, how can this be possible??

Pacman giving error after 'packman-key --init'

Well after a long time i m back on arch. and i found out that pacman has changed and using pgp signature (happy now !). and everything is smooth except one thing pacman is still giving error and asks me to import pgp for every single package when i try to install something. here is an output :
[root@Olympians hades]# pacman -S rhythmbox
resolving dependencies...
looking for inter-conflicts...
Targets (32): aspell-0.60.6.1-1 clutter-1.8.2-2 clutter-gst-1.4.6-1
clutter-gtk-1.0.4-1 cogl-1.8.2-1 enchant-1.6.0-4 gmime-2.6.4-1
gobject-introspection-1.30.0-1 grilo-0.1.18-1 gvfs-1.10.1-2
gvfs-afc-1.10.1-2 hspell-1.1-1 hunspell-1.3.2-1 icu-4.8.1.1-1
json-glib-0.14.2-1 libdiscid-0.2.2-1 libdmapsharing-2.9.12-1
libgpod-0.8.2-2 libmtp-1.1.1-1 libmusicbrainz3-3.0.3-1
libpeas-1.2.0-1 libwebkit3-1.6.1-1 media-player-info-15-1
mutagen-1.20-3 mx-1.4.1-1 pygobject-devel-3.0.3-1
python2-beaker-1.6.2-1 python2-gobject-3.0.3-1
python2-mako-0.5.0-2 python2-markupsafe-0.15-1
totem-plparser-2.32.6-3 rhythmbox-2.95-1
Total Installed Size: 129.07 MiB
Proceed with installation? [Y/n] y
(32/32) checking package integrity [----------------------] 100%
error: grilo: key "A5E9288C4FA415FA" is unknown
:: Import PGP key 4FA415FA, "Jan Alexander Steffens (heftig) <[email protected]>", created 2011-08-25? [Y/n] y
error: icu: key "94657AB20F2A092B" is unknown
:: Import PGP key 0F2A092B, "Andreas Radke <[email protected]>", created 2011-05-14? [Y/n] y
error: enchant: key "976AC6FA3B94FA10" is unknown
:: Import PGP key 3B94FA10, "Jan de Groot <[email protected]>", created 2011-06-06? [Y/n] y
(32/32) checking package integrity [----------------------] 100%
(32/32) loading package files [----------------------] 100%
(32/32) checking for file conflicts [----------------------] 100%
(32/32) checking available disk space [----------------------] 100%
( 1/32) installing json-glib [----------------------] 100%
( 2/32) installing cogl [----------------------] 100%
( 3/32) installing clutter [----------------------] 100%
( 4/32) installing clutter-gtk [----------------------] 100%
( 5/32) installing clutter-gst [----------------------] 100%
( 6/32) installing grilo [----------------------] 100%
Optional dependencies for grilo
grilo-plugins: Plugins for grilo
( 7/32) installing gvfs [----------------------] 100%
Optional dependencies for gvfs
gvfs-afc: AFC (mobile devices) support
gvfs-smb: SMB/CIFS (Windows client) support
gvfs-gphoto2: gphoto2 (PTP camera/MTP media player) support
gvfs-obexftp: ObexFTP (bluetooth) support
gvfs-afp: Apple Filing Protocol (AFP) support
( 8/32) installing gvfs-afc [----------------------] 100%
( 9/32) installing libdmapsharing [----------------------] 100%
(10/32) installing mutagen [----------------------] 100%
(11/32) installing libgpod [----------------------] 100%
Optional dependencies for libgpod
gtk-sharp-2: Mono bindings
(12/32) installing libmtp [----------------------] 100%
(13/32) installing libdiscid [----------------------] 100%
(14/32) installing libmusicbrainz3 [----------------------] 100%
(15/32) installing gobject-introspection [----------------------] 100%
(16/32) installing libpeas [----------------------] 100%
Optional dependencies for libpeas
gjs: gobject-based plugin engine - gjs runtime loader
seed: gbject-based plugin engine - seed runtime loader
(17/32) installing icu [----------------------] 100%
(18/32) installing aspell [----------------------] 100%
==> aspell comes with no default dictionary
Optional dependencies for aspell
perl: to import old dictionaries
(19/32) installing hunspell [----------------------] 100%
Optional dependencies for hunspell
perl: for ispellaff2myspell
(20/32) installing hspell [----------------------] 100%
(21/32) installing enchant [----------------------] 100%
(22/32) installing libwebkit3 [----------------------] 100%
(23/32) installing media-player-info [----------------------] 100%
(24/32) installing mx [----------------------] 100%
(25/32) installing pygobject-devel [----------------------] 100%
(26/32) installing python2-gobject [----------------------] 100%
(27/32) installing python2-markupsafe [----------------------] 100%
(28/32) installing python2-beaker [----------------------] 100%
(29/32) installing python2-mako [----------------------] 100%
(30/32) installing gmime [----------------------] 100%
(31/32) installing totem-plparser [----------------------] 100%
(32/32) installing rhythmbox [----------------------] 100%
Optional dependencies for rhythmbox
gstreamer0.10-ugly-plugins: Extra media codecs
gstreamer0.10-bad-plugins: Extra media codecs
gstreamer0.10-ffmpeg: Extra media codecs
brasero: cd burning
and here is my pacman.conf file.
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
TotalDownload
ILoveCandy
CheckSpace
# PGP signature checking
# NOTE: None of this will work without running `pacman-key --init` first.
# The compiled in default is equivalent to the following line. This requires
# you to locally sign and trust packager keys using `pacman-key` for them to be
# considered valid.
#SigLevel = Optional TrustedOnly
# If you wish to check signatures but avoid local sign and trust issues, use
# the following line. This will treat any key imported into pacman's keyring as
# trusted.
SigLevel = Optional TrustAll
# For now, off by default unless you read the above.
#SigLevel = Never
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
#[community-testing]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
#[multilib]
## Add your preferred servers here, they will be used first
#Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
i searched it but i am not sure i understood it quite very well. anyway thanks for help. and its good to be back !!!

so can anyone of you post your pacman.conf file that is already merged ?? and when i press y when it prompts to import the key it doesn't really import it ! and i dont understand this - i m able to install single package but cant upgrade the system ! okay here is the output -
[hades@Olympians ~]$ sudo pacman -Syu
:: Synchronizing package databases...
core 106.4 KiB 23.1K/s 00:05 [----------------------] 100%
extra 1186.2 KiB 93.1K/s 00:13 [----------------------] 100%
community 1048.9 KiB 114K/s 00:09 [----------------------] 100%
:: Starting full system upgrade...
:: Replace module-init-tools with core/kmod? [Y/n] y
resolving dependencies...
looking for inter-conflicts...
Targets (204): alsa-firmware-1.0.25-1 alsa-lib-1.0.25-1 alsa-oss-1.0.25-1
alsa-utils-1.0.25-1 ati-dri-7.11.2-1 autoconf-2.68-2
automake-1.11.2-1 avahi-0.6.30-6 bash-4.2.020-1
binutils-2.22-4 bison-2.5-3 bzip2-1.0.6-3
ca-certificates-20111211-1 cifs-utils-5.2-1 colord-0.1.16-1
conky-1.8.2git20111107-1 consolekit-0.4.5-2 coreutils-8.15-1
cracklib-2.8.18-2 cryptsetup-1.4.1-1 curl-7.24.0-1
db-5.3.15-1 deadbeef-0.5.1-4 desktop-file-utils-0.19-1
dhcpcd-5.2.12-4 dialog-1.1_20111020-1 dnsutils-9.8.1-2
dosfstools-3.0.12-1 e2fsprogs-1.42-1 enca-1.13-2
eventlog-0.2.12-3 expat-2.0.1-7 fakeroot-1.18.2-1 file-5.10-1
filesystem-2011.12-2 findutils-4.4.2-4
flashplugin-11.1.102.55-1 flex-2.5.35-5 freeglut-2.8.0-1
gawk-4.0.0-2 gcc-4.6.2-6 gcc-libs-4.6.2-6 gdbm-1.10-1
gdk-pixbuf2-2.24.1-1 gettext-0.18.1.1-4
glib-networking-2.30.2-1 glib2-2.30.2-1 glibc-2.15-4
glibmm-2.30.1-1 gmtk-1.0.5-2 gnome-icon-theme-symbolic-3.2.2-1
gnome-keyring-3.2.2-3 gnome-mplayer-1.0.5-1 gnutls-3.0.12-1
gpm-1.20.6-7 grep-2.10-1 groff-1.21-2 grub-0.97-21
gstreamer0.10-bad-0.10.22-3 gstreamer0.10-bad-plugins-0.10.22-3
gstreamer0.10-ffmpeg-0.10.13-1 gstreamer0.10-ugly-0.10.18-4
gstreamer0.10-ugly-plugins-0.10.18-4
gtk-update-icon-cache-2.24.9-1 gtk2-2.24.9-1 gtk3-3.2.3-2
gucharmap-3.2.2-1 gzip-1.4-4 heirloom-mailx-12.5-3
idnkit-1.0-2 inetutils-1.9.1-1 initscripts-2012.01.3-1
intel-dri-7.11.2-1 intltool-0.50.0-1 iproute2-3.2.0-2
iputils-20101006-2 jack-0.121.3-5 jfsutils-1.1.15-3
jshon-20111222-1 keyutils-1.5.5-1 kmod-4-1 krb5-1.9.2-2
lame-3.99.3-1 lcms2-2.3-1 less-444-2 libass-0.10.0-3
libbluray-0.2.1-1 libburn-1.1.8-1 libcap-2.22-2
libcroco-0.6.3-1 libdatrie-0.2.5-1 libdrm-2.4.30-1
libdvdnav-4.2.0-2 libdvdread-4.2.0-1 libevent-2.0.16-1
libgl-7.11.2-1 libglapi-7.11.2-1 libgnome-keyring-3.2.2-1
libgphoto2-2.4.11-1 libgusb-0.1.3-1 libiec61883-1.2.0-3
libjpeg-turbo-1.1.1-4 libldap-2.4.28-2 libpcap-1.2.1-1
libpipeline-1.2.0-2 libpulse-1.1-2 librsvg-2.34.2-1
libsasl-2.1.23-9 libthai-0.1.16-1 libusb-1.0.8-2
libusb-compat-0.1.3-2 libvdpau-0.4.1-2 libxfce4ui-4.8.1-1
libxi-1.4.5-1 libxrandr-1.3.2-2 linux-3.2.2-1
linux-firmware-20111101-1 lirc-utils-1:0.9.0-10
lxappearance-0.5.1-3 m4-1.4.16-2 mach64-dri-7.11.2-1
man-db-2.6.0.2-3 mdadm-3.2.3-1 mesa-7.11.2-1 mga-dri-7.11.2-1
mjpegtools-2.0.0-1 mkinitcpio-0.8.2-1
module-init-tools-3.16-1 [removal] mpfr-3.1.0.p3-1
mpg123-1.13.4-2 mplayer-34426-1 nano-2.2.6-2 ncurses-5.9-2
network-manager-applet-0.9.2.0-1 networkmanager-0.9.2.0-1
nss-3.13.1-2 obmenu-1.0-9 openbox-themes-1.0.2-2
openssl-1.0.0.g-1 p11-kit-0.9-1 pam-1.1.5-2 parted-3.0-4
patch-2.6.1-3 pciutils-3.1.8-1 pcre-8.21-1 perl-5.14.2-7
pixman-0.24.2-1 pkg-config-0.26-2 pm-quirks-0.20100619-2
polkit-0.103-1 poppler-0.18.3-1 poppler-glib-0.18.3-1
popt-1.16-4 ppp-2.4.5-3 python-distutils-extra-2.29-1
python-imaging-1.1.7-4 python2-2.7.2-4 r128-dri-7.11.2-1
raptor-2.0.6-1 readline-6.2.002-1 reiserfsprogs-3.6.21-4
run-parts-4.0.4-1 savage-dri-7.11.2-1 scrot-0.8-5
sdl-1.2.15-1 sed-4.2.1-4 sg3_utils-1.33-1 shadow-4.1.4.3-5
shared-color-profiles-0.1.5-1 sis-dri-7.11.2-1
smbclient-3.6.2-1 sqlite3-3.7.10-1 startup-notification-0.12-2
sysfsutils-2.1.0-7 syslinux-4.05-1 syslog-ng-3.3.4-1
talloc-2.0.7-1 tar-1.26-2 tdfx-dri-7.11.2-1 texinfo-4.13a-7
transmission-gtk-2.42-2 tzdata-2011n-1 udev-179-1
unrar-4.1.4-1 upower-0.9.15-1 util-linux-2.20.1-2
vi-1:050325-2 wavpack-4.60.1-2 which-2.20-5
wireless_tools-29-6 wpa_supplicant-0.7.3-4 x264-20111030-1
xcb-util-0.3.8-1 xf86-input-joystick-1.6.0-3
xf86-video-ati-6.14.3-1 xf86-video-intel-2.17.0-2
xf86-video-vmware-11.1.0-1 xfconf-4.8.1-1 xfsprogs-3.1.7-1
xkeyboard-config-2.5-1 xorg-server-1.11.3-1
xorg-server-common-1.11.3-1 xorg-xinit-1.3.1-2
zathura-0.0.8.5-4
Total Download Size: 7.87 MiB
Total Installed Size: 898.19 MiB
Net Upgrade Size: 20.59 MiB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
glibc-2.15-4-i686 7.1 MiB 118K/s 01:02 [----------------------] 90%
e2fsprogs-1.42-1-i686 7.9 MiB 118K/s 01:08 [----------------------] 100%
(203/203) checking package integrity [----------------------] 100%
(203/203) loading package files [----------------------] 100%
(203/203) checking for file conflicts [----------------------] 100%
error: failed to commit transaction (conflicting files)
filesystem: /etc/mtab exists in filesystem
Errors occurred, no packages were upgraded.
[hades@Olympians ~]$

Error after V6R1M0 upgrade

Hi
After OS upgrade V5R3 -> V6R1 we encounter problems with starting SAP. All the WORK process's dies.
ECC 7.0
Kernel patch 186
This is the log from one of the work process.
Loading DB library '/usr/sap/BND/SYS/exe/run/dbdb4slib.o' ...
ERROR => DlLoadLib: dlopen()= Could not load module /usr/sap/BND/SYS/exe/run/dbdb4slib.o.
itional errors occurred but are not reported. -> DLENOACCESS (2,No such file or directory) ¬dlux.c       314|
ERROR => Couldn't load library '/usr/sap/BND/SYS/exe/run/dbdb4slib.o'
I don't think PTF MF46062 is the issue here!
Can anyone help?
Best regards
Mads Hammer

Hi Rene
Yes, I run APYR3FIX as <SID>OFR. Here is a screen dump of the user.
User profile . . . . . . . . . . . . . . . :   BNDOFR
Special authority . . . . . . . . . . . . :   *SAVSYS
                                               *SECADM
Group profile . . . . . . . . . . . . . . :   BNDOWNER
Owner . . . . . . . . . . . . . . . . . . :   *GRPPRF
Group authority . . . . . . . . . . . . . :   *NONE
Group authority type . . . . . . . . . . . :   *PRIVATE
Supplemental groups . . . . . . . . . . . :   BNDGROUP
                                               R3OWNER
                                               R3GROUP
R3OWNER is a supplemental group.
Is there something wrong with user profile?
Best regards
Mads Hammer

Reporting Services Error after Interactive sorting and drill down in pps

Hi
i have a report that has a drill down option that shows all workgroups within a specific parent group and an interactive sorting ass well on both columns parent group & workgroup
This is displayed in pps combined with a SharePoint
---the problem is that after sorting the parent group column by name i then press the drill through icon (+) next to it hopping to see all workgroups related to each parent group
- but instead
i receive this Reporting Services Error :
The value for parameter 'SortItem' is not specified. It is either missing from the function call, or it is set to null. (rsMissingParameter) Get
Online Help
If I don't press the sorting and just drill through it works fine. the sorting itself also works fine.
any suggestions ?

Hi Hyaron,
I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
from the Grouping Pane in the Report Designer.
How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

Finding: Incorrect SQL throws a random error (after 2005 upgrade)

Hi I thought that I would share an experience that we found after upgrading a system to 2005:
Due to the upgrade of SBO, one of our addons didn't work properly after upgrading it to 2005. Basically the code would break in random places (while stepping through it in the Development Environment).
After some time we identified the error was being thrown because a sql query we were using was incorrect due to the changing of the DB structure in the upgrade. The weird thing was that it didn't throw an error at rs.DoQuery(query) but actually would step into the recordset and then the addon would suddenly stop working - hence the reason it took a while to identify it was the sql causing the problem.
Anyway updating the sql fixed the problem, but if anyone else is finding strange behavior whilst trying to identify why an addon might stop working after an upgrade, you should check any sql being used is still correct....
Daniel

The first versions of SBO2005A SDK (PL00 to PL04) was the say the least VERY buggy... PL05,06 and now 07 seem to get things under control... Any rampup version of 2005 should at least get up PL05 ASAP... I didnt have many problem with the SQL, but "Server produced an error was a very common error".. my problem was primarily in matrixes (add/remove of lines), itemevent (pval internal COM error) and the dangerouse UserTable error due to currupted object in it....

Jco call rfc throws error after WAS upgrade sp15

Hi all.
When 2 days ago, our WAS engine version is sp14.
And we have one application using jco library to connect to SAP R/3. It works well.
After we upgrade WAS to sp15.
This function throws out the error.
Umrechnungsfaktor konnte nicht bestimmt werden
Is there anybody can help me ? Its very urgent !

Hi
A)Go to adming page http://<localhost>:<port> >>click Web Dynpro >>Content admin >> create, maintain, test Jco and also you can Test the SLD connection too
B)If you are using any JDBC driver,Check your JDBC driver is registered. or else you have register it
1. Start the Visual Admin tool
2. In the tab Cluster, open the node of the server you want to check.
3. Open the node Services under the server you want to check.
4. Click on the entry ClassLoader Viewer under Services. 5. The components are displayed in the right window. Open the node Applications in the right window.
6. Look for the entry sap.com/com.sapportals.connectors.database and click on it.
Under sap.com/com.sapportals.connectors.database, your JDBC driver should be available
Cheers
Jawahar Govindaraj
PS: Reward points

Statistics gather after 10g upgrade

I am on apps 11.5.10.2, database has been recently upgraded from 9.2.0.6 to 10.2.0.4. I used to periodically use GATHER SCHEMA STATISTICS (ALL SCHEMA), in the previous release of db.
What should be practiced after the upgrade? There are some custom schemas for third party tool. Does gather schema statistics concurrent program gather statistics for all the schema?
Thanks
SA

user593719 wrote:
Hussein,
To register a custom schema, I have to go thru the series of steps like registering application, creating a TOP etc., right? What if my custom application is in some other windows server and only schema is in the apps database? Do we need still follow the same steps?
Regards,
SAI am not sure why you have this custom schema in this Apps database. If your custom schema has nothing to do with Apps, you would be better off creating a separate instance for this custom app. You could then use the automatic stats gathering mechanism in 10g to gather stats for this custom schema app.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/stats.htm#i41282
HTH
Srini

External command Cpic error - after V5R4M5 upgrade

Hi,
We are getting an error when we try to run external commands - Exception raised: PROGRAM_START_ERROR - The problem started after we upgraded the OS to V5R4M5. We are running R/3 45B. kernel patch 994.
SAPXPG JOBLOG: I see the following error MCH1210
QCPFMSG
MESSAGE-
Receiver value too small to hold result.
I could not find a new version of sapxpg for 4.5b_ext. I
Regards,
Brian

Never mind I found note 976837 that resolved the problem
Regards,
Brian

Report giving error when the alias in the sql statment is long

Hi,
When I am writing a select statement with long alias name, report in portal is giving error, and is working fine with sqlplus
Any idea,
Thanks,
Mansoor

Hi
when i run in foreground it is working perfectly. The Spool is not getting created.
regards
madhuri
Edited by: madhuri_2000 kumari on Nov 26, 2008 2:00 PM

I'm getting errors after I upgraded to Mavericks

After I upgraded my Mac Pro to Mavericks, I've been having problems exporting files out of Final Cut Pro to any use.
The error message displays the following:
The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
Has anyone seen similar error and found a way to fix it?

10.0.1 //
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.4 GHz
Number of Processors:          2
Total Number of Cores:          8
L2 Cache (per Core):          256 KB
L3 Cache (per Processor):          12 MB
Memory:          20 GB

SIM card registration error after SW upgrade

Hi
After I upgraded my Nokia 6110 Navigator to SW 4.22 I get insert SIM or SIM card registration error. It happends approx. once a week. Before I upgraded my mobile it never happend. Why?
BR / haav

This is often a problem with the SIM itself. That it started showing just when you did the firmware upgrade could be coincidence.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

"Load Report Failed" Error after upgrading to CR XI R2 and VS 2005

Previously I had visual studio 2003 and crystal report XI and on my website project and I have this function where users can download their monthly statement. and it was working fine. here is my code of the function...
Private Sub cmdStatement_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdStatement.Click
        Dim pReport As New ReportDocument
        pReport = New ReportDocument()
        Try
            'Dim pTable As Table
            pReport.Load(Server.MapPath(".") & "\reports\MonthlyStatement.rpt")
            pReport.SetDatabaseLogon(dbUser, dbPassword, dbServer, dbDatabase)
            pReport.RecordSelectionFormula = "{CCMSC.CID}='" & mCID & "'"
            Dim pArray() As String =
            DataAccess.SqlPublic.ExecuteDataset(cnString, "webDownloadEStatement", pArray)
            Response.ClearContent()
            Response.ClearHeaders()
            Response.ContentType = "application/pdf"
            pReport.ExportToHttpResponse(CrystalDecisions.[Shared].ExportFormatType.PortableDocFormat, Response, True, "DebtHelper_" & mCID & "_MonthlyStatement")
            pReport.Dispose()
        Catch ex As Exception
            divMessage.Visible = True
            lblMessage.Text = ex.Message
        Finally
            pReport.Dispose()
        End Try
    End Sub
Now, recently I upgraded my crystal to CR XI Release 2 SP6 and also upgraded my web project to Visual Studio 2005 with .NET 2.0. and now it gives me "report load failed" error on the very first line pReport.Load(......)
The project has updated the references related to crystal reports to the 11.5 version from 11.0. Not sure what am I missing here.
I have also opened the report file in the new crystal and saved it. I also opened it in Visual Studio itself and saved it.
I would appreciate any help possible.
Thanks
Raj

Hi! Ludek,
I have tried to hard code the path. I checked the win/temp folder and the aspnet account already has the read/write permissions.
Below is the detailed error message:
Error Message: Load report failed.
Page Error Occurred: /MyDebthelper/reports.aspx
ExceptionType: System.Exception
Inner Exception: System.Runtime.InteropServices.COMException (0x800001F5): The Report Application Server failed at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
Stack Trace: at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) at MyDebthelper.reports.cmdStatement_Click(Object sender, EventArgs e) in C:\Documents and Settings\RBhavsar\My Documents\Visual Studio 2005\Projects\MyDebtHelper\MyDebthelper\reports.aspx.vb:line 83 at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Thanks
Raj
Edited by: debthelper on Apr 30, 2010 5:21 PM

Report giving error after 10g upgrade

Similar Messages

Maybe you are looking for