Report in Transaction CJE0 - LOAD_PROGRAM_NOT_FOUND
Hi ABAP Gurus,
After double clicking a project report in Transaction CJE0, Dump LOAD_PROGRAM_NOT_FOUND occurs. Can you kindly provide advise on how to check this? Thank you.
Best regards.
Brando
This is the error: program "GP3U00IL5OJAWE41MAMXUFGYEXR" does not exist in the library.
I debugged this and the above program is being submitted in FM RKD_REPORT_START_ONLINE. However, the program does not exist. Hence, the dump occured.
Do you happen to know how to verify if it is the correct program to be called? and how to add/generate the program if it;s the correct one?
Thank you
Similar Messages
-
Standard Report or Transaction for Outstanding Purchased Materials?
Hello,
Is there a report or transaction that could be used to see a list of all pending purchased material requirements with requirement date?
So, pending Purchase Requisitions and Purchase Orders with a required delivery date? We want to create shortage lists for manufacturing.
(think like COOIS where you can see planned and production orders, but for purchased parts)
Thanks very much,
TimothyHi Ramagiri,
Thanks so much for your help. These are the two transactions I was trying to use... unfortunately I ran into a couple of problems...
I tried selecting only specific WBS elements in ME2L using the dynamic selection, and it didn't return any documents (I know this is incorrect)... so I ran it without the dynamic selection and just applied a filter, which is ok.
However, I can't find the MRP requirement date anywhere in this report, which is the main point - we are trying to find PO's that are later than MRP requirements. I can see the delivery date only if I open each PO from the results of ME2L search. Did I explain that problem ok?
Thanks again,
Timothy -
Problem with submit report for transaction LT23
Hi,
I want to submit report for transaction LT23 based on the double click on a field in the output of my report. I am using selection table to pass values. The problem is I have something called dynamic selections. I am using some selection fields from the dynamic selection option. Can anyone tell me how do I pass the values in such a case?In your [submit|http://help.sap.com/abapdocu/en/ABAPSUBMIT.htm] statement in the [selection screen parameters|http://help.sap.com/abapdocu/en/ABAPSUBMIT_SELSCREEN_PARAMETERS.htm] use the [WITH FREE SELECTIONS|http://help.sap.com/abapdocu/en/ABAPSUBMIT_SELSCREEN_PARAMETERS.htm#!ABAP_ADDITION_5@5@] option to pass dynamic selections
NB: Use FREE_SELECTIONS_RANGE_2_EX to build the correct parameter texpr.
Regards
Raymond -
XL Reporter Sample AR Aging Report by Transaction come up blank
Hi,
I am running B1 2007 with PL38. I downloaded the sample AR Aging Report by transaction from SAP but when I generated the report, I get the worksheet with blank Data. Can anyone make any suggestions.
Regards,
Peter ToPeter,
We're at PL41, but I had the same problem and contacted SAP Support. After reporting the problem, SAP logged onto my database via a WebEx session, got into SQL Server Console, and modified a ixView in the database views. They had to increase the size of two Ref fields in the view. Once they did that, everything worked fine.
You probably just need to open a message and get it scheduled. -
How to Report on transactions performed in SRM_MDM catalog (SRM5 MDM2)
What is the recommended way to do reporting for transactions performed INSIDE SRM_MDM catalog ( SRM5, MDM2.0)
Users inside SRM_MDM catalog can search for and select Product ABC and u201Ccompareu201D between 2 or more suppliers.
Where do I get reporting (Data Manager , syndicator?)
Is it possible to get reporting of the shopping cart (MDM catalog). I choose Supplier X at price $12 vs Supplier Y at price $11 for product ABC. Were trying to find out how many times users choose a higher price for a product instead of a lower price for the same product.
By the time i transfer the Cart to SRM the selection has already been made and i cannot report on it...
Option use BI to run report in MDM catalog..?
cheers
alex
Edited by: Alex Waiyaki on Aug 11, 2010 5:24 PMHi Alex.
This was a really a good initiative of bringing this topic into this forum.Integrating SRM-MDM Catalog to BI for reporting purposes.
But this functionality is not offered as a standard. Also SAP has to come up with such innovations in the future.
I can think of some workaround to achieve your functionality(but not 100%)
You can achieve this by using Shopping List* functionality provided in the SRM-MDM Catalog.
You can create your own shopping list and before you transfer items to SRM, you can push those data to Shopping List, so that
you can have an entry of items which you are transferring to SRM. So now you can integrate MDM and BI to bring up an analytical report based on the item which is transferred using Catalog.
One usecase which is missing here is "How many times a person is shopping the same item" which couldn't be achieved from SRM-MDM Catalog and MDM side. But could achieve it from SRM end. You can write this logic in the BADI when the data is transferred back to SRM.
Hope it give you a some idea.
*Shopping List = Favourites
Thanks
Bala -
Price comparision report through transaction ME49
Hi Exports,
I am new in abap report enhancement. I am working as a implementation project, here i have add some more fields and generate report.
Report details:
Transaction ME49-- Price Comparision report
Here i have add one Remarks fields related to Vendor and report will be generated and remarks values will display .
Please helps me and guide me how to do this tasks.
If you have code for this , please send me this mail id: [email protected]
Advance thanks you.
Regards,
JnanaIf you are goint with user exit check
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Transaction Code - ME49 Price Comparison List
Exit Name Description
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
AMPL0001 User subscreen for additional data on AMPL
No of Exits: 35
Rewards if useful...............
Minal -
Why cant we Report on transactional ODS directly?
Hi Pioneers
could any one let me know the reason why we cant report on Transactional ODS directly?Why should we create an infoset for that purpose.Whats the reason?
BR
RaviHI Ravi
You cannot set the indicator for BEx Reporting when creating a transactional ODS object. In order to report this, you can create an InfoSet and then execute a BEx query for it.
hope it helps
regards
AK
thnaks=points
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c0/99663b3e916a78e10000000a11402f/content.htm
regards
AK
Message was edited by:
A K -
Report or Transaction of customer data
Hi all,
I would like to know if the SAP has the report or transaction data to list of customers, such as: code, name, e-mail, address, country,....
thanks,
Gullo
Edited by: Ana Claudia Gomes Machado Fernandes on May 25, 2009 1:43 AMHi,
In standard there are two reports for address and company code details.They are :
S_ALR_87012179 and S_ALR_87009958 .
In VCUST Report,you can find address,country and name.
Or you can also check the same in tables.
Goto SE11/SE16.
Enter the table names as KNA1,KNB1 and KNVV.
Fetch ADRNR from KNA1 and enter the same in ADRC table,you will get the full address.
Regards,
Krishna. -
Report with Transaction currencies
Hi All.
i am in the process of developing a report in project systems with my developer.
The scanerio is investment projects (all internal projects) . Exchange rate type P is defined and is uploaded one in an year.
We have been using budgets in different currencies. So, a project is budgeted in 3-4 curriencies at differenct WBS levels and is posted with many currencies. As of now its working fine ...........................now the requirement of the client is , he need a report in transaction currencies.
So, a WBS many be budgeted in one currency, but might be posted in different currencies. So for one WBS, we might have 4-5 currencies existing. Now a report need to be developed.
Is this possible? any suggestions from your end?Hi Surya,
You need to explain your client the transaction curr report will be meaningless when time comes to give a total for the columns. They need to go with either object or controlling area currency to make some sense out of these figures.
I hope it helps,
Regards,
Dave -
Change field size in simulate report on transaction PR05
Hi,
I want to increase the receipt description field on the simulate report on transaction PR05.
Is there any user exit where I can do this or do I have to make a standard modification? If so, do you know in which program?
Thanks.
SóniaHere`re the user exit
Transaction Code - PR05 Travel Expense Manager
Exit Name Description
FITR0001 User exit: Delete/Reorganize trip statistics
FITR0002 User exit: Create/Change trip statistics
FITR0003 User exit: Save trip (PR01, PR04, PR05)
FITR0005 User Exit: Save Trip (PR01, PR04, PR05)
RPRCST01 Customer Exit for Travel Expenses
<b>and program to find user exit for Tr.</b>
report y_user_exits no standard page heading.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Hope thisll give you idea!!
<b>P.S award the points.!!! !!!</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise" -
Re-generating a report in transaction rsrt
Hello All,
Please advise on how to re-generate a report in transaction rsrt.
Please also advise on what re-generating a report actually does.
Thank you in advance.
Regards,
KeithHi,
RSRT is tcode Query debugging.
You can set the Query properties there and can execute the report and findout whether its running fine or any warnign messages its giving......i.e , whether everythign is ok withthat query or not.
Assign points if it helps.....
Jyothi. -
Double click on Report Assignmet -- Transaction
Hi SAP QUERY Experts,
I have a question for the query. Is it possible using a interface parameter for report-to-report interface? I mean when I double click on one the data record of query, I want to transfer the key information of this record to the query or report or transaction as parameters. Is it possible?
when i try to use in GOTO-->Report Assignmet -- Transaction -- mm02 - I double click on one data record of query (material) and the query open the transaction without parameters.
Thanks and Regards
avishay
Edited by: avishay haliva on Jan 24, 2010 4:37 PMHi.
you can do that easily..
use export/import for passing values to another report
and use set parameter and get parameter to pass value to another transaction....
its all depends on the session to which you are passing values...internal or external session
Rgds/Abhi -
Reports from Transaction Tables
Hi Experts,
Can I develop a report using transaction tables.
Here I am trying to develop a report based on 2 transaction tables. In physical layer I joined one another table using primary key from table and the same column which is a foreign key in another table. And the dragged them to BBM and later to Presentation layer.
But when I tried to build a report it is showing error.
I think I missed something some where. Please help me with your inputs to develop a report directly using transaction tables.
Thanks
SurpieHi,
Double-click a physical table object to view its properties
Click the General tab to view and set general properties for a physical table object
The Table Type drop-down list allows you to specify the physical table object type. Physical Table is the default. You can also define the physical table as a stored procedure or a SELECT statement.
Select Table Type as "SELECT"
When you select either of these options, a text pane below the Table Type drop-down list becomes active, allowing you to enter the stored procedure or the SELECT statement
Enter the SQL statement
Click OK.
Select tables have an eyeglasses icon
A Select table serves as an opaque view in the repository metadata, but no corresponding view is actually created in the database. The Administration Tool provides a Deploy View feature that creates a corresponding view in the database.
To deploy a view, right-click the object and select Deploy View.
View deployment window will appear asking for confirmation.
Click ok. View will be created in database.
Mark if this is helpful/ correct.
Thanks
Azhar -
Need report or transaction that shows what pieces of EQUIPMENT for material
Hi,
Please could you tell me a report or transaction that will give me the pieces of EQUIPMENT that materials are tied to in SAP?
Currently in CS15 (where used list) you can only enter one material at a time. I need a report where I can enter many materials and the report shows all of the pieces of equipment that the materials are tied to.
Please suggest,Waiting for reply
Thanks & Regards
AnilAnil
This is a common request and a quick search of this forum and/or SAPFans using CS15 would have found the answer....
There is nothing standard, however, a common approach is to copy CS15 and add the required functonality.
If you are using ECC6, then it may be possible to use the Enhancement Framework to extend the standard report. Talk to your ABAP team.
PeteA -
Hello Forum,
I need aid with the following thing: When doing a CALL TRANSACTION to transaction CJE0 in the atmosphere of development works correctly, in atmosphere QA2 does not work, when they begin to appear the windows of the transaction in visible way is not observed happens of parameters from the program. That podria to be this? Habra another form to enter to him the CJE0 by another transaction?
Thanks. Maria.This is the error: program "GP3U00IL5OJAWE41MAMXUFGYEXR" does not exist in the library.
I debugged this and the above program is being submitted in FM RKD_REPORT_START_ONLINE. However, the program does not exist. Hence, the dump occured.
Do you happen to know how to verify if it is the correct program to be called? and how to add/generate the program if it;s the correct one?
Thank you
Maybe you are looking for
-
Overclocking Guide Disclaimer: Overclock at your own risk! Data and information provided in this guide are for informational and educational purposes only, and are not intended for trading purposes. Neither MSI nor any of this thread’s authors shall
-
Time Machine external hard drive gone.
I have seen other posts that are similar to this, but not exactly like it, and am hoping someone can give me some guidance. I had the read only message come up on the time machine after I did the latest update. It said it was read only, and that the
-
Web Dynpro for ABAP @ SDN Wiki
Dear users and developers of Web Dynpro for ABAP! I'd like to invite you to Web Dynpro page in SDN Wiki launched recently. <a href="https://wiki.sdn.sap.com/wiki/display/WDABAP">Wiki page for Web Dynpro ABAP</a> It's really great place for all WD For
-
Can anyone suggest a clean, elegant way to create an app to install Adobe Reader 6 with all of its updates? (We have a bunch of Windows 98 machines that can't use AR 7.) The way Adobe has distributed AR 6 and its patches has been idiotic. To get to t
-
Can't access music store, Help!
Hi, I'm running windows XP, Service Pack 2. I've updated my itunes software to 5.01.4 Every time I click on the iTunes music store I get a windows error: "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience" What s