Report issue , logical name of the system has been changed

Hi
Recently our system has been upgraded to ECC5.0. In a particular report  while drilling down we get  error. The error says the original doc can not be shown as it belongs to logical system ( DRH-123) . Now we know that this logical name of the system was in old box . The new logical name is DRH-100 . We are saying it's a basis issue and the basis team is saying it's FICO issue.Has any body encountered this type of problem. ? In my report  i have never mentioned logical name of the system.Hence unable to understand it. But so far what I have understood , that the each box  has been partioned and given a system name which is called logical name.Now that logical name they have changed in new box.My initial response was change the logical name but basis says that is a big task and more over it has been a while when they changed it.
Gurus, Kindly shed some light on this mess.
Thanks in advance
Satya

Which report are you pulling out? T-code?
This link has some that may help you:
www.scribd.com/doc/24447/SAP-R3-IDoc-Cookbook-for-EDI-and-Interfaces-by-Axel-Angeli
Do CTRL+F to find Logical Systems
If the link doesnt work use the following keywords and google it, shoose second result: EDI IDOCS interface axel angeli sap
You may also want to get in touch with the person who was involved in developing LS. Talk with your ABAPer, they normally have an idea about these things (well atleast my ABAPer knows!)
Message was edited by:
        Vj

Similar Messages

  • Can't access EMS or Toolbox - get "load quota for the system has been exceeded" error

    I'm trying to run some commands on our CAS servers, and I'm getting the error "load quota for the system has been exceeded".  I'm running two CAS servers in an Exchange 2013 Standard Environment, running on Windows 2012 Standard servers. 
    Both my CAS servers are getting the error.  I also have two MBX servers, and I can access EMS on those just fine.
    I checked another thread that had a similar issue for Exchange 2010: 
    https://social.technet.microsoft.com/Forums/exchange/en-US/1cc17514-44dc-41d9-b319-3232107490c0/cant-open-emc-or-ems-for-exchange-2010-from-local-machine?forum=exchange2010
    However none of the fixes they described worked, and some of the fixes look like they're out of date.
    Here's the full error message.  It tries to connect to both CAS's, fails, and then connects to the first MBX it can.
    VERBOSE: Connecting to cas2013.contoso.com.
    New-PSSession : [cas2013.contoso.com] Connecting to remote server cas2013.contoso.com failed with the following error message :
    The WS-Management service cannot process the request. The load quota for the system has been exceeded. Send future
    requests at a slower rate or raise the system quota. For more information, see the about_Remote_Troubleshooting Help
    topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : -2144108120,PSSessionOpenFailed
    VERBOSE: Connecting to CAS2013.contoso.com.
    New-PSSession : [cas2013.contoso.com] Connecting to remote server cas2013.contoso.com failed with the following error message :
    The WS-Management service cannot process the request. The load quota for the system has been exceeded. Send future
    requests at a slower rate or raise the system quota. For more information, see the about_Remote_Troubleshooting Help
    topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : -2144108120,PSSessionOpenFailed
    VERBOSE: Connecting to ca2-2013.contoso.com.
    New-PSSession : [ca2-2013.contoso.com] Connecting to remote server ca2-2013.contoso.com failed with the following error message :
    The WS-Management service cannot process the request. The load quota for the system has been exceeded. Send future
    requests at a slower rate or raise the system quota. For more information, see the about_Remote_Troubleshooting Help
    topic.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
       gTransportException
        + FullyQualifiedErrorId : -2144108120,PSSessionOpenFailed
    VERBOSE: Connecting to MB2-2013.contoso.com.
    VERBOSE: Connected to MB2-2013.contoso.com.
    [PS] C:\Windows\system32>
    ----------- Ron E Biggs Chief Tech Officer Entertainment Studios

    Hi,
    Is the ”
    cas2013.contoso.com” the second CAS Server you added?
    What’s the authentication settings on the powershell VD on the Back End Server. If the
    Anonymous is enabled, please disable it and restart the IIS to check if the issue persists.
    Thanks,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • The system has unsaved changes - WLC Startup-config

    Hi guys,
    Is there a command to see the startup-config?
    Or a command to see "what exactly" am I going to save when receiving the below message:     
    The system has unsaved changes.
    Would you like to save them now? (y/N)
    I tried show run-config vs uploaded configuration file, but the format is different so I cannot compare...

    Hi
    With Areonet OS (5508,2504,etc) you do not have this freedom
    If it is IOS you can do this using a single command "show archive config differences nvram:startup-config system:running-config" So with 5760/3850 you can do this.
    http://mrncciew.com/2012/11/08/show-archive-config-differences-is-your-friend/
    With Areonet 5508,2504 if you need to know what commands your configuration will adds to your config, you can do some sort of workaround (though it is not clean,still you can see what lines adding to WLC config)
    Do  "debug aaa tacacs enable" on your WLC CLI & then make a change using WLC GUI, you will see on your CLI what commands it will add to your config.
    So you have to make your changes one by one to learn all the CLI config addition to your configuration.
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • TS4009 how do you retrieve information after the system has been reset to default

    how do you retrieve information after the system has been reset to default?

    From a backup on itunes or icloud, assuming you have made backups.  Connect to itunes and in the first tab for your device, choose to perform a restore.

  • The record has been changed....on default form

    Hi,
    I'm facing a strange problem....
    Trying to alter the prompt in the menu default form, for one and only one record, the message "The record has been changed.Re-query to see the changes." appears...!!!
    I have seen this message on custom forms.... but on default form which also insists even when i close the form and re-open it..., first time....
    What do you suggest me to do...???
    Note: I use eBS 11.5.10.2 and DB10g v.2
    Thank you,
    Sim

    Hi sgalaxy,
    It looks the system is detecting something different between the record shown in the form and the record stored in the DB table, and that's why it's showing the error message. Typically the issue is caused by date columns that are truncated in the form or by trailing spaces in text columns. You will need to compare columns in form and DB table until you find the problematic column and update it manually (truncating date or removing trailing spaces in DB)
    Hope it helps.

  • I keep getting a warnin that my pages document could not be auto saved. The file has been changed by another application. Click save anyway to keep your changes and save the changes made by the other application as a version, or click revert to keep the c

    I keep getting a warning stating that the document could not be auto saved in pages. The file has been changed by another application. Then it says click save any way to keep your changes and save the changes made by the other application as a version, or click revert to keep the changes from the other application and save your changes to a version.
    What in the heck does all that mean, and why are they trying to behave like a Windows product or a Microsoft office product. I just don't get it.
    Why is another application changing my documents? It's like they've created a virus within their own programs. It's a pain in the neck and makes no sense.

    I am also having the issue of a warning saying "could not be auto-saved in Pages. The file has been changed in another application. I then hit "save anyway", the warning will go away for a time, sometimes minutes, sometimes hourr, but then the warming reapprears saying the same thing. This is not the case with all Pages documents but it is the case with many.
    Working with a Retina Macbook Pro and current software
    These are newly created documents

  • Cannot save ... The file has been changed by another application.

    Hi,
    This is to report a wierd behavior when pages is auto saving documents.
    An error pops up  "Cannot save ... The file has been changed by another application."
    Clicking "save anyways" seems to save the document OK, but still this is very anoying.
    Saving the document manually (from the menu) isn't showing any error message.
    Can someone help with a hint as of when this will be fixed or is there a workaround?
    Thank you in advance,
    Best Regards,
    Michel.
    Pages version 5.0.1 (1478) on OS X 10.9

    The phrase "by another application" makes it pretty clear that it is not Pages (or, in your case, Keynote).
    What seems to be happening is that between the time that Pages opens a document, or saves it and the next time that it attempts to save it, something updates the document's file on the hard drive. Pages, recognizing that the file contains changes for which it is not responsible, presents this alert so you can decide whether you want to overwrite those changes. The usual suspects are backup and synchronization applications, like iCloud, which may not recognize the "Open" flag on the file, but I think it can also be triggered by AppleScripts, Automator workflows and Services, if they perform a "Save" action on the file.

  • My computer restarts itself to update then when it comes the password has been changed and im locked

    my computer restarts itself to update then when it comes the password has been changed and im locked out how do i stop it and fix it

    Hi
    try to boot in safe mode, and check there if you have any alternate account (administrator ect) where you can gain access to your window and then change password of it.
    Hope it helps!
    **Clicking on the Kudos! white star is a nice way to say thank you on any post that helped you or resolved the problem.**
    **Selecting "Accept as Solution" for a reply that solves your issue helps others who are searching the web for an answer**
    **Clicking on the Kudos! white star is a nice way to say thank you on any post that helped you or resolved the problem.**
    **Selecting "Accept as Solution" for a reply that solves your issue helps others who are searching the web for an answer**

  • I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered

    I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered to reduce contrast. The background is now grey as well rather than white. The accessibility options permit only three choices. First, increase type size. With the the low greyscale, thin typeface, increasing type size makes it HARDER to read. There is no option for contrast enhancement. Third, the background switch options suffers from the same deficit as the white background. The third choice is to enhance brightness but without the option to change contrast, this is useless. Am I missing something? Can this be fixed? How? When? Are you planning a similar negative "update"/change to other devices?

    I am having the same problem. I have gone through every setting, set the bold font, contrast, larger font....everything I could find in any post to try and help - and between the new color scheme that makes it virtually impossible to use the pictures of my grandchildren as background (the picture colors now become the theme colors - which now match the colors of many of the "flat" icons...) I am finding the phone very difficult to use--espeically things like the calendar which has now become very hard to "see" and use. If I can't revert this thing to iOS6, I may have to get a different phone.

  • This document enabled extended features in Adobe Reader. The document has been changed...

    I am trying to distribute an interactive order form to approx. 50 recipients with Acrobat X Standard which I purchased recently.  Computer is Windows 7.
    I can go through the form editing and distribution as usual, but when I (or a recipient) opens up the distributed form with Adobe Reader, they get the message: “This document enabled extended features in Adobe Reader. The document has been changed and use of extended features is no longer available. Please contact the author for the original version of this document.”
    Oddly enough, sometimes is does work, but 90% of the time it doesn’t.
    And I have another, older XP computer with Acrobat X installed, and it works fine 100% of the time – weird....can anyone help?

    Hi Ken
    We have so many people who have not updated they are trying on 9. I might just have to tell them we can’t support under reader 10.
    Thanks
    Tania
    Never tell people how to do things. Tell them what to do and they will surprise you with their ingenuity. -General George S. Patton
    Tania Lindenmayer \ Manager Organisational Shared Services \ Jabiru Community Youth & Children’s Services Assoc (Inc) \ Ph: (07) 3269 0044  Fax: (07) 3869 0675 \ [email protected]<mailto:[email protected]> \

  • HT1267 i have a iphone 3gs but i cant use it now the status has been change so i cant use it. im in china

    i have a iphone 3gs from 3years i go i bought in the states now im in china and i can register it .........the apple store here in shanghai says the status has been changed on the phone so i cant use it........what can i do?

    You have to get AT&T to unlock it. You'll have to call them.

  • The account has been changed from only local currency to multiple currency.

    hI,
    The customer has an Account "X" which is a balance sheet account. and not a reconciliation account.
    this account has been changed on November 11, 2008, from only local currency to multiple currency.
    Local currency is ZAR, and document currency is EUR.
    i.e, the check box 'only balance in local balance' has been unchecked from 11 Nov, 2008.
    so, when i see the balance of this account in FS10N.
    the balances in currency ZAR and EUR is different.
    because the balance which is in EUR is only for months 11 and 12.
    so, questions are...
    1) can we make it same balance in both the currencies by posting a document only in EUR?
    2) how to clear it?
    Regards,
    Swetha

    The balance in the currency (EUR) depends upon the currency exchange rates you have defined in the system.  When you post a document in another currency, the exchange rate mentioned for the currency pairs (ZAR & EUR for example) is applied and the balance is written in your local currency.  If you want that the balances in difference currencies are the same, then the exchange rates should be the same for all relevant pairs of currencies.

  • Problem: logical system has been changed once it has already been assinged

    hai,
    we have started ebp configuration with a fresh client.and we assinged logical systems,but unfortunately someone has worked in the same client and made his own logical name...but later in console transaction the system promts that you have no backend rfc connection.my senior told that someone has changed..i tried to rectify in smoeac trx....but the system cannot takes the receiver logical id....plz tell me anyone how to solve my problem...hx in advance

    Hi
    Please check first in scc4 what is the logical system for your client . Ask your administaror to broadcast a message not to change a logical system to every one.so that everyone uses only one logical system for one client.
    regards
    Muth

  • 0176 Security - The system has been tampered with

    So the machine is a T40. It hasnt had any passwords for atleast the 2 years ive had it. The main battery has been bad and the cmos battery died recently (id assume the bad main battery helped it along).
    After replacing the cmos battery (tested it with v-meter and it shows 3.23v) Im getting this error message. When I click ok to goto setup it asks for a password. But when I hit enter it lets me in without any problems. Its also never done this before the cmos battery died. 
    Under security it says lock bios setting disabled. Power on and hard disk 1 also disabled. 
    I thought to try to reset to defaults but when i press f9 it doesnt work. No idea if that key is broken, ive never used it. 
    Bios info 3.21 (1RETDPWW)
    Embedded version 3.04
    Anybody have any ideas what to try? I know toshiba had a similar problem with some of there models but they included a cmos reset jumper pad on there motherboards to reset bios defaults. 
    Ive seen thinkpads with all 0's on the UUID before when the boards were going but this one has a correct number in it. 
    Anybody have any ideas on what I can do? Its a older machine so motherboard isnt really worth doing. 
    Solved!
    Go to Solution.

    Your T40 has a Supervisor password on it, that's why you can't reset defaults etc.
    Dying of CMOS battery has brought that issue up, hence the error message.
    Use it as-is, not much you can do short of swapping the motherboard.
    Good luck.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Contact order: I sort first names/Last: I enter phone numbers by priority, Most used (home or mobile), then work, then fax, and save.  The next time I use the phone, the order has been changed to work fax, home, mobile.  Using hands free in auto is a trip

    This is a pain when the phone re-sorts the order, when I need the most used number to be first using hands free in my car.   Who can get this corrected in the iphone software to leave the order in which I imput numbers alone.

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Maybe you are looking for