Report Job execution time

Hi Everybody
In 10g Grid I have a job which runs every day, In Job activity I can see exceution time if I click on each and every run But I need to create a report on how long that job took to execute in last 2 months.
Can somebody point me to data dictionary tables I can use to write the sql or point me to some documentation on how to create that report?
Thanks for your help
Jeet

Take a look at MGMT$JOB_EXECUTION_HISTORY. All the views can be found in the Enterprise Manager Extensibility Guide.
Eric

Similar Messages

Last one month jobs execution time in sql server 2008 r2

Dear Friends,
We configured replication between three servers two are publishers and one subscriber for two publisher.
my question is daily basis one job running on subscriber end it truncate and insert the data every night .
unfortunately today job was failed I observed in jobs view history. but client requirement manually run the job and data dump into the table. but I want know its previous execution time as per that I will run the job in production hours but in jobs view
history showing only today's fail job history. how to find the last execution time .
note: yesterday job was successfully completed.
Message
Executed as user: NT AUTHORITY\SYSTEM. Cannot initialize the data source object of OLE DB provider "SQLNCLI10" for linked server "server name". [SQLSTATE 42000] (Error 7303) OLE DB provider "SQLNCLI10" for linked
server "server name" returned message "Unable to complete login process due to delay in opening server connection". [SQLSTATE 01000] (Error 7412). The step failed.
mastanvali shaik

But what about to that particular job ? what is the name of the job ? Please assign that job name in the below script and check .. Its sure that history is not exist for that particular job anyway for your confirmation please use the below scripts and try...
make sure to add the name .. when was the last backup taken for your system databases ?
WHERE JOB.name = 'Your JobName' -- Add your job name..
SELECT [JobName] = JOB.name,
[Step] = HIST.step_id,
[StepName] = HIST.step_name,
[Message] = HIST.message,
[Status] = CASE WHEN HIST.run_status = 0 THEN 'Failed'
WHEN HIST.run_status = 1 THEN 'Succeeded'
WHEN HIST.run_status = 2 THEN 'Retry'
WHEN HIST.run_status = 3 THEN 'Canceled'
END,
[RunDate] = HIST.run_date,
[RunTime] = HIST.run_time,
[Duration] = HIST.run_duration
FROM sysjobs JOB
INNER JOIN sysjobhistory HIST ON HIST.job_id = JOB.job_id
WHERE JOB.name = 'Your JobName'
ORDER BY HIST.run_date, HIST.run_time
Raju Rasagounder Sr MSSQL DBA

Query to find out weekly average of job execution time

I have a table which has the following details:
CREATE TABLE JOB_DETAILS (JOB_START_DATE DATE,
JOB_END_DATE DATE,
JOB_START_TIME NUMBER,
JOB_END_TIME NUMBER,
HOURS_OF_EXECUTION NUMBER,
DETAILS VARCHAR2(20));
INSERT INTO JOB_DETAILS VALUES ('01-FEB-2007','01-FEB-2007',10.04,20.09,10.04,'WEEKDAY');
INSERT INTO JOB_DETAILS VALUES ('07-FEB-2007','07-FEB-2007',00.00,00.00,00.00,'WEEKEND');
commit;
Job_Start_Date Job_End_Date Job_Start_Time Job_End_Time Hours_Of_Execution DETAILS
1/2/2007 1/2/2007 10:04 20:09 10:04
1/7/2007 1/7/2007 0:00 0:00 0:00 Weekend
Our jobs wont run on week ends and on holidays where we see "Hours_of_execution" as 0.
Week means Monday to Friday for me.
(1) I want a query which gives me a weekly,monthly average of how many hours the job ran.
(2) I want to find out the week, when the average execution of the job is > 10 hours.
can anyone help in framing this query to get the details?
Thanks

Why make it so hard for yourself by removing the time from the date and storing it separately?
alter session set nls_date_format='DD/MM/YYYY HH24:MI:SS'
session altered
WITH t AS (SELECT SYSDATE start_date, SYSDATE+0.61 end_date FROM dual)
SELECT start_date, end_date, numtodsinterval(end_date-start_date,'DAY') execution_time
FROM t
START_DATE END_DATE EXECUTION_TIME
11/12/2008 11:22:21 12/12/2008 02:00:45 +00 14:38:24.000000

Database job execution time changing

Hello,
I created a job to execute every 15 minutes. What I have noticed is it is not getting executed every 15 minutes, instead period is increasing over 1 or 2 minutes.
Here is my code for job, is it because of seconds it is making the difference?
DECLARE
X NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
( job => X
,what => 'myproc'
,next_date => to_date('20/08/2006 07:34:10','dd/mm/yyyy hh24:mi:ss')
,interval => 'sysdate+30/2750'
,no_parse => TRUE
END;
/

You need to use date functions that evaluate to a FIXED time in the future (see AskTom for further explanation: http://asktom.oracle.com/pls/ask/f?p=4950:8:9447876042389067866::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:13317229864022)
The preferred method would be to create custom-built function that returns the required interval. The function can use hard-coded logic (like the example below) or it can read from simple "repository" (set of tables with job schedules, maintenance windows etc.).
Example:
1) Create next_date function
CREATE OR REPLACE FUNCTION next_date
RETURN DATE IS
v_date_portion_1 VARCHAR2(16);
v_date_portion_2 PLS_INTEGER;
v_date_portion_3 PLS_INTEGER;
v_next_date DATE;
BEGIN
v_date_portion_1 := TO_CHAR(sysdate, 'dd.mm.yyyy');
v_date_portion_2 := TO_CHAR(sysdate, 'hh24');
v_date_portion_3 := TO_NUMBER(TO_CHAR(sysdate, 'mi'));
v_next_date:= TO_DATE(v_date_portion_1||' '||
(CASE
WHEN v_date_portion_3 < 15 THEN TO_CHAR(v_date_portion_2)||':'||'15'
WHEN v_date_portion_3 >= 15 AND
v_date_portion_3 < 30 THEN TO_CHAR(v_date_portion_2)||':'||'30'
WHEN v_date_portion_3 >= 30 AND
v_date_portion_3 < 45 THEN TO_CHAR(v_date_portion_2)||':'||'45'
ELSE TO_CHAR(v_date_portion_2 + 1)||':'||'00'
END), 'dd.mm.yyyy hh24:mi');
RETURN v_next_date;
END next_date;
2) Change interval
BEGIN
DBMS_JOB.CHANGE(<your_job>,
null,
null,
interval=>'next_date');
END;

How to find overall execution time for a report

Hi,
I want to know the total time duration which is taken by my Report. (To fetch(read) the data from database and to print them after filtering.
Can you please tell me a way to do so.
Thakns
Deepak Sisodia

Hi Deepak,
Open the report and refresh the report after successful retrival of data go in Report--Performance Information.
You will get all information related to report and execution time.
Thanks,
Sastry

OSB: reporting via service callout & reporting execution times

Assume I made a common local service for a general report action and it's called from all inbound proxy services. At the moment all I see is in the report database is: inbound service uri: LocalProxy and inbound service name: <my local report service name>. How can I log the original service instead which was called?
An other question: is it possible to report the execution time of the service call into the database as well? I'd prefer having two measures: service execution time from the inbound proxy service until it leaves the ESB with the response; and the called business service execution time.

>
How can I log the original service instead which was called?
>
It was discussed here before: Re: How to call a OSB proxy service from a different OSB process?
Search forum to get more inputs.
>
An other question: is it possible to report the execution time of the service call into the database as well? I'd prefer having two measures: service execution time from the inbound proxy service until it leaves the ESB with the response; and the called business service execution time.
>
OSB out-of-box monitoring capabilities are not enough?
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/operations/monitoring.html
If you want to log execution time of every single call, try searching forum again.

Execution time in minutes and seconds

In the UUT Report, the Execution Time displays in seconds. How can I get that to display in minutes and seconds.

I'm just now getting to this, and I've decided to address this in the reportgen_html.seq. In the step labelled "Add Execution Time", the expression reads,
Locals.Header += "<TR><TD NOWRAP='NOWRAP'><B><LI>" + ResStr("MODEL", "RPT_HEADER_EXEC_TIME") + "</B><TD><B>" + (PropertyExists("Parameters.MainSequenceResults.TS.TotalTime") ? Str(Parameters.MainSequenceResults.TS.TotalTime, Parameters.ReportOptions.NumericFormat , 1, True) + ResStr("MODEL", "RPT_HEADER_SECONDS") : ResStr("MODEL", "RPT_NOT_APPLICABLE")) + "</B>\n"
I found the RPT_HEADER_SECONDS constant and changed it to _MINUTES and changed the string. I divided the Parameters.MainSequenceResults.TS.TotalTime by 60, and this all seems to work. The only thing that's not working is that I'm updating the Parameters.ReportOptions.NumericFormat, and no matter what I do it keeps showing me 13 decimal points.
The Parameters.ReportOptions.NumericFormat is set to %$.13f (but I've tried several variations).
I just want it to display something like 21.63 minutes. Also, what is the $ doing in that expression

Query Execution times

Hi All,
I am trying to know the most used queries in our BI system by trying to find out how many times the query has been executed.
we recently upgraded our BI system and I could find the number of times query has been executed by opening this report SAP_BW_QUERY - No.of Executions per BI Application Object.
The problem is that it is showing me the most used reports after upgrade and I would like to know from the last 6 months or 1 year.
I have checked from the old BW statistics multiprovider and they are couple of reports there but none of the reports shows Execution times of queries.
I checked from ST03N and it I got information for only Query runtime.
could someone let me know which report is related to number or execution times from old BW statistics.
thanks

Hi,
Once see no.of Navigations, it is nothing but no of times executed. once check in that queries which allready developed.
Regards
Pcrao.

How to get the execution time of a Discoverer Report from qpp_stats table

Hello
by reading some threads on this forum I became aware of the information stored in eul5_qpp_stats table. I would like to know if I can use this table to determine the execution time of a worksheet. In particular it looks like the field qs_act_elap_time stores the actual elapsed time of each execution of specific worksheet: am I correct? If so, how is this value computed? What's the unit of measure? I assume it's seconds, but then I've seen that sometimes I get numbers with decimals.
For example I ran a worksheet and it took more than an hour to run, and the value I get in the qs_act_elap_time column is 2218.313.
Assuming the unit of measure was seconds than it would mean approx 37 mins. Is that the actual execution time of the query on the database? I guess the actual execution time on my Discoverer client was longer since some calculations were performed at the client level and not on the database.
I would really appreciate if you could shed some light on this topic.
Thanks and regards
Giovanni

Thanks a lot Rod for your prompt reply.
I agree with you about the accuracy of the data. Are you aware of any other way to track the execution times of Discoverer reports?
Thanks
Giovanni

Why data has not been copied from staging DB to Reporting DB even timer job status is success ?

Hello,
I am facing following issue regarding web analytic service for specific date 2014-08-18:
Verified following services which are running and status was success on that specific date 2014-08-18 :
Web Analytics Service
Microsoft Usage Data Import
Microsoft SharePoint Foundation Usage Data Processing
Observed latest Web Analytics Setting as below :
LastAggregationDateId
20140817 - The date id of the last successfully completed data aggregation
LastAggregationTime
2014-08-18T00:00:13.210 - The time of the last successfully completed data aggregation
LastBestBetSuggestionAggregationDateId
20140818 - The date id of the last successfully completed best bet suggestion data aggregation. This date id should not be reset to an earlier date manually.
LastDataCopyTime
2014-08-17T23:59:09.693 - The last time the data were copied from the staging databases to this reporting database for aggregation
Above settings says that Data has not copied from Staging DB to Reporting DB on Date 2014-08-18
In order to verify the same I have checked as follow:
SELECT COUNT (*) FROM [dbo].[WATrafficAggregationByDate] WITH (NOLOCK)
WHERE [DateId] = 20140818
Above SQL Query has returned ZERO value.
Can anyone please let me know Why data has not been copied from staging DB to Reporting DB even timer job status is success ?
Your help will be much appreciated.
Thanks and Regards,
Dipti Chhatrapati

The image itself has the answer
The user requests a page, and the action gets picked up by the Web Analytics service that runs on SharePoint.
The Web Analytics service logs this in the “.usage” files.
A Timer job called “Microsoft SharePoint Foundation Usage Data Import” by default runs every 30 minutes. It imports the logs into the staging database.
Each night the “Microsoft SharePoint Foundation Usage Data Processing” Timer job runs and transforms the data into the reporting database.
The last run time of the import from staging and the aggregation is logged in the Settings table in the Reporting database.
Usage and Health Data Collection Service Application collects Data about Usage and Health of your farm.
This information is used for Health Monitoring and this is also required for running the Web Analytics Service. If you do not have a Usage and Health Data Collection Service Application or your
Usage and Health Data Collection Proxy is stopped, you will not see any data in the Web Analytics Report
Regards Chen V [MCTS SharePoint 2010]

Different execution times for back ground jobs - why?

We have few jobs scheduled and each time they run, we see a different execution times. Some times, it increases and some times it decreases steeply . What could be the reasons?
Note:
1. We have the same load of jobs on the system in all the cases.
2. We haven't changed any settings at system level.
3. Data is more or less at the same range in all the executions.
4. We mainly run these jobs
Thanks,
Kiran
Edited by: kiran dasari on Mar 29, 2010 7:12 PM

Thank you Sandra.
We have no RFC calls or other instances. Ours is a very simple system. We have two monster jobs, the first one for HR dataand second an extract program to update a Z table for BW loads.
Our basis and admin confirmed that there are no network issues
Note: We are executing these jobs over the weekend nights.
Thanks,
Kiran

To reduce execution time of a Business Objects Dataservices job.

The issue that we are facing-
Our goal- To compare a record from a file with 422928 records from another table on basis of name & country, if a match is found then you take some specific columns of that matched record (from the table ) as our ouput.
What we are doing- We are at 1st removing duplicates by doing matching on the address components (i.e.- addr_line1, city, state, postal code & country), here                    the break key for match transform is country & postal_code, its taking 1823.98 secs. Now the record count is 193317
                  Then we are merging the file record along with the 193317 records to put them in the same path and send them for matching.
                  The match criteria is the firm name & iso_country_cd,
                   the break key for match transform is the iso_country_cd & the 1st letter of the name.
                   It took 1155.156 secs.
We have used the "Run match as seperate process' option for the match to reduce the time.
The whole job took 3038.805 secs.
Please suggest how to reduce the execution time.
Edited by: Susmit Das on Mar 29, 2010 7:41 AM

This really is impossible to help with without seeing your code.
Replacing while loops with Timed Loops will not help. Timed Loops are used for slowing while loops down in a controlled manner. You would use them to synchronise with a clock rate, and can set other parameters for priority and CPU allocation etc. These will not likely help to reduce your execution time.
If you are seeing code execution of 1 second then you will need to optimise your code to reduce the execution time. There are LabVIEW guides on how to improve your code execution time, just search around for them.
Also try using the Profiling tools to learn which VIs (I presume your code is componentised and each while loop contains subVIs?) are hogging the most CPU time.
If you cannot share your VI then there it is very hard to know where your code execution bottlenecks are.
Thoric (CLA, CLED, CTD and LabVIEW Champion)

Execution time of a report as a column

Hi Gurus,
Normally if you want to know the report execution time we will go to the Administrator-->manage sessions there we will find the time of execution of the respective reports.
Is it possible to add column(Execution Time) in the report and it as to show the time of that respective report what exactly showing in the manage sessions. Can we achieve this in OBIEE...?
Thanks,
Rafi

Hi Rafi,
If you have enabled usage tracking, make use if Total_time_sec column,
http://gerardnico.com/wiki/dat/obiee/usage_tracking_time_column
Regards,
Dpka

Execution time for the report.

Dear All,
How do i determine the execution time of the report?
If i need to run some program then please do tell me how can i run the program too?
Thanks..

Hi,
The thread below is telling you how to see query statistics in ST03N.
Re: BEx Query is executed how many times???
Regards.

Execution time for web reports

Hello every one,
How to calculate execution time for web reports, for query execution we will go through RSRT, by giving query name and press execute + Debug button then select statistical data & Do not Cache buttons then press enter, after getting output press on back button, we will get duration of the query.....
But my question is , can we calculate execution time for webreport, if so can you please guide me.
and can you also tell me , if there is any RRI for one report, how to calculate execution time for these queries.
Ex : Query ABC have XYZ as its drilldown report , i need to calculate execution time for XYZ report via ABC report.
Thanks in advance,
Best Regards.
NP.

Hi,
For reports executed in java web you can add the parameter &PROFILING=X
to the URL in order to record the execution time. Please have a look at SAP note 1048691 for further information.
Best regards,
Janine

Report Job execution time

Similar Messages

Maybe you are looking for