Report Line Graph Question

Hi, I am plotting a line graph with some date values on the X axis and some data on the Y axis.
For Example:
Sep 01 11
Sep 02 19
Sep 03 14
Sep 04
Sep 05 9
Sep 06
Sep 07
Sep 08 19
This will result in gaps on the 4th, 6th and the 7th. This is expected behaviour. However, is it possible to set some properties in the graph so the line will be continuous. For Example From 14 to 9 (downward) and from 9 to 19 (upward), without 'assuming' values or nvling to 0 (then the line will drop all the way to 0 and bounce up). ( I want to include dates without Y axis data )
I have markers on points that have values (ex: 11,19,14,9 and 19), if the line just connects without data there will not be any markers and the user will understand there are no data for those dates. The continuous line will make it easy to understand the flow (without using a fit or a trend line).
I have pretty much exhausted all attribute settings from graph.dtd
Note: I have an access chart I am converting to Reports and access lets you do this and I have to maintain the same in Reports !
Thanks
A
null

Bump. Thanks

Similar Messages

Oracle reports - Line graph

Hello,
I have a few issues with the line graphs (using oracle 10g dev suite R1 - 9.0.4).
1. Unable to make my y axis - a dotted line.
2. Since I couldn't make the y axis a dotted line, I made it a thin line. This thin line looks fine when I run it from the oracle reports builder. but when I genenerate to a PDF file, this thin line becomes thicker.
3. Thirdly, I want to place a dot or something wherever the value changes in the line graph. One option is to add the MarkerText visible="true" to the Graph settings xml file. but this puts the marker text to all the y axes.
I want it only for 1 y axis.
Cheers

Assuming you mean "series" and not "axis", you can control the style, width, and markers using the lineStyle, lineWidth, and markerShape attributes of the <Series> element (in the XML shown in the Graph Settings property) for the series (set of Y values) of interest.
For example, to use a thin, dotted line with circle markers on the first series, but leave the other series with their defaults, you might:
1. Make sure the markerDisplayed attribute of the <Graph> element is set to ="true". Otherwise, no markers will be displayed.
2. For the <Series> element with the id attribute equal to "0" (which identifies the first series), set the lineStyle attribute to "LS_DOTTED", the lineWidth attribute to "1" (in pixels), and the makerShape attribute to "MS_CIRCLE".
3. If needed, set the markerShape attribute of the other <Series> elements to "MS_NONE".
The Graph Settings property might look something like this:
<rw:graph id="CT_1" src="G_YOUR_GROUP" groups="X" dataValues="Y1,Y2">

</rw:graph>For more information, see the "Graph.dtd" file in your "%ORACLE_HOME%\jlib\bigraphbean.jar".
Hope this helps.

Line Graph Question

Hi
I am trying to create a graph where I have 3 data points
this relates to inspections
House number      Items found date of inspections
101                                  30              April, 2 2014
201                                  34            May 1 2014
Y axis I am showing items found
x axis I am displaying the House number
I would like to also display the month the inspection occurred
A am currently displaying the month in the legend at bottom of page
But would like to do something like below
I am getting x and y ok but not month display (Thanks)
        |
30    |
20    |
10    |__________________________________
                                  101 201      301 302 303
          JAN FEB MAR APR MAY        JUN

Hi
I have it in the report header
I have created a formula to extract the month from inspection date
I added both the data expert for the x axis sorted original sort
each month can contain any number or inspections and indicated by different colours on the line
graph matching the legend colours
What would be great is if I can delineate where each months data starts and stops
it's sort of done by the graph now by using different colours but I would like to label it
tried every option but could not pull it off
thanks

2D Line Graph Question

I have a 2D line graph that I built. At some points in the graph where the lines intersect the number values displayed on the graph get bunched up and it is hard to read. Is there a way to fix that? This is APEX 3.2 on Oracle 10.2.0.4 database. Thanks

You basically have only a couple of options here:
First, turn off the labels and possibly turn them into Hints. They wouldn't show on the chart, but when the user held over the data point, a tool tip would appear showing them the valuable.
Second, adjust elements of the chart. What you are really looking at here is that your data set is causing this specific issue and not the charting engine or anything like that. You could try to manually change the axis max and min to get more spacing, or you could adjust the height of the chart to get more spacing, but this may not be a viable option. You could have one set of labels above the plotted line and another set of labels below the plotted line that way the values do not overlap with anything. However, from a conceptual standpoint, it will be difficult to determine in code which line should have values above and which should have values below. When your data set changes, you may end up with labels in the wrong place if you hard code where they are at.
The current XML reference can be found at: http://www.anychart.com/products/anychart/docs/xmlReference/index.html however, that is for anychart 5. I'm looking for the link to the earlier versions...
You can use this to create custom xml where you can adjust the position of the labels.
Finally, you do not want expand the height of the chart between two points on the Y axis. That would change the structure of the chart and the visual properties of the chart and the shape of the data would be askew. You cannot do this for good reason. You can though use a logrithmic scale. In most cases though, this is not a practical solution. Data sets need to have very specific characteristics in order to be able to merit a logrithmic scale. Most queries require a simple linear scale.
Austin

Line Graph Question: Compare different values thru time ...

Hi, hope someone can help me I've been looking at examples, but I cant get this to work:
Here is a link to what the data looks like: http://primolandia.com/line_problem.jpg
As you can see, I have a table with columns: Team, Date, CriteriaNum1, CriteriaNum2, CriteriaNum3
One graph per Criteria which compares how each Team did on that Criteria thru time...
So I want the X axis to have the "Date" and have one line per team showing the value at different times ...
Any ideas?
Thank you!!!
Claudio

I wish to withdraw this question ... I finally figured out my issue...

Line graph issue in web report

Hi
I have a 3 queries/reports on one page in my web report. I have 3 line graph buttons, one for each query.
My issue is, in the report result or table, I have characteristic "Product" in rows and Key figures in Columns.
Product                          Month 1     Month2
XYZ          Demand
             On hand stock
             Ending Inventory
But when I hit the line graph button, it shows Product in the X (horizontal) axis and number ranges like 15000, 20000, 25000 in the Y axis.
I need to swap the axes. I tried the "swap display axis" in the web items tab, but it didn't work.
I read other threads on the same topic here and someone had suggested creating a query view, switching the columns and rows there and running the report to display the line graph as required.
If I do that, won't the report result in the table also swap the rows and columns? I want the table to show Product in the Rows and KFs in the column as it is now, but I want the line graph to show Product in the Y axis and the Key figures in the Y axis.
Any ideas on how to do that? Any help will be greatly appreciated. Thanks!
Pooja

This is what I did:
1) In BEX Analyzer, I opened the local view of the Query and swapped the Key figures and Characteristics. I put the key figures in the columns and Characteristics in the Rows
2) I ran my report and save it as a View
3) In WAD, I assigned the Chart to the View.
When i ran the report from WAD, it still shows the key figures or number ranges in the Y axis and Characteristics on the X axis again.
I checked the "swap display axes" option in Web Item tab, but the line graph still remains the same.
Is there another way to do this? Or am I missing something?
Thanks
Pooja

How to combine a stacked bar chart and a line graph together in one report

I have a report in excel that has stacked bar chart and a line graph together in one report. I am trying to recreate the same in Webi, Is this possible? Did any one have similar requirement, could you please share the thoughts?
Thanks,
Hema

May be I don't understand correctly...
But if its really to separate chart area's;
just copy the datablock and format one as line and the other as barchart...
Hope this helps,
Marianne

Creating a 3 line graph report

Need help with creating a 3 line graph - need to be able to plot 3rd line of data without displaying a legend and use a dynamic tag label for the line. Thanks

You can create two graphs with the same horizontal (and if necessary vertical) scale, and make them occupy the same space on the report, one under another.
On one report, put your 3rd graph line, and remove any visibleÂ text, gridlines etc, so you basically just have the axes lines and the graph line.
On the top report, make the background transparent, so both graphs are visible (Chart Expert->Options->Transparent Background).

Issue with Line Graph in SSRS

I am pulling my hair our trying to format a line graph.
Below is my current report -
The Line Graph I have created has a Category Group of "YearLogged" and "MonthLogged".
The series I have added is an expression -
=Count(IIF(Fields!InvoicePaid_.Value = "Yes" And Fields!ProcessTarget.Value = "InTarget", 1, Nothing))
As you can see the data label is coming back as values in "Paid" column from my table. What I want is the percentages instead labelled.
Also the Y axis is coming back with the total Paid invoices as a percentage? That's not right I want that to show up to 100%.
I just want to show what % of invoices are being paid In Target over the month.
Another question - where is the legend title getting "Process Target" from? Can I rename that to what ever I want?

Hi ikilledbill,
According to the snapshot of the chart you have provided that it seems you have put the fields "YearLogged" and "MonthLogged" in the Category Group and add field "InTarget" in the Value area as Series, you also add
the expression "Count(IIF(Fields!InvoicePaid_.Value = "Yes" And Fields!ProcessTarget.Value = "InTarget", 1, Nothing))" to display another series, now you want to display the percentage of InTarget/Paid as the data
point, right?
I have tested on my local envoronment and details information below for your reference:
I have use some sample data as below and if you want to display the percentage value as in below snapshot, you need to add expression like below in the series:
=Fields!InTarget.Value/Fields!Paid.Value
After add the expression, right click the data label to select the "Series Label Properties" and click Number to select the "Percentage".
Right click the Y-Axis and select the "Vertical Axis Properties", click Number to select the "Percentage".
To change the Legend Title, please right click the series and select the "Series Properties", enter the title you want in the "Custom legend text":
If I have some misunderstanding, please try to provide more details information about the design of the chart and also sample data in the table.
Any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Is it possible to modify marker shapes in a line graph

Hello,
Some questions regarding the marker shapes in line graphs.
I have a line graph with two series. The client wants one series to have the diamond shape (black border, white inside) and the other series to also be a diamond but be filled in black.
Is there a way to do this?
Also, the marker shapes appear small in the graph. Is there a way to increase the size of the marker shapes?
Lastly, I can't get the marker shapes to appear in the legend. I have tried setting markerShapeInLegend="true" in the Graph tag but that didn't help. It still just displays the line colour of the series.
We are on version 10.1.3.4.1
Any help is greatly appreciated. Thanks!
Jared

Hi,
It is impossible to do that because the user query is using query generator. Click the condition button in the quer generator windows. The selection criteria text used the condition.
you can use a custom report instead of using user query e.g. crystal report or reporting services
JiM

Problems with Flash Line Graphs

I have two problems with the new Flash Line Graphs in APEX 3.1
1. I have created a query that returns a set number of rows. Sometimes the VALUE for a specific row might be null. When this occurs the LABEL data does not show up on the X axis. I want the LABEL data to show up no matter what. How do I accomplish this?
2. Related to the above query. When the VALUE field is null for 3 records (or more) in a row, not only does the LABEL data for those records not display, the VALUE and LABEL data for the records that appear in the set after these 3 records also do not display. If one or even two null VALUE fields appears in a row, things are still OK. What do I need to do to get all my data to display?
Any help would be appreciated.
THANKS
Raymond

Raymond,
For the Interactive report chart issue, could it be related to this?
Re: Apex 3.1. Interactive Report. Questions and Problems.
Interactive Report. Chart. Seems to be bug...
- Christina

Numbers Line Graph is more annoying than Miley Cyrus

Hello and thanks for taking time to read and answer my question. So I have a science fair project coming up and numbers is being very annoying. My experiment is testing the affect of temperature on the effectiveness of magnets. My table looks like this:
Magnet 1
Magnet 2
Magnet 3
Magnet 4
Magnet 5
Average
74 Degrees
40g
42g
50g
27g
38g
39.4
200 Degrees
28g
25g
35g
46g
38g
34.4
250 Degrees
62g
39g
10g
53g
29g
38.6
300 Degrees
34g
19g
36g
23g
41g
30.6
350 Degrees
26g
21g
17g
36g
37g
27.4
All I want to do is make a simple line graph that will show the correlation (or lack of one) However, when I try to make it into a graph, I keep either getting no lines at all or only the line for the average. Why is this? What am I doing wrong? Help is greatly appreciated.
Thanks so much,
Colton
I'm using numbers 3.1 by the way.

Hi Colton,
"I keep either getting no lines at all or only the line for the average. Why is this? "
It's because the column labeled Average is the only one containing numbers. Appending the g or " Degrees" forces Numbers to regard the values in the other columns as Text, which has no numerical value, and can't be graphed.
With the text stripped from those numerical values you can produce either of these two graphs. See the notes below regrding the major differences.
Scatter chart with connected points
Line chart
Cosmetically, the line graph appears with thicker lines connecting the data points, and with all symbols set to open circles. I thickened the connecting lines on the scatter chart to make them more visible, and made the Average line about 40% thicker than the others. No changes were made to the lines on the line chart.
The legend for both (Magnet 1, Magnet 2, etc.) appears as a horizontal line (or lines) of text. Selecting the box, then dragging either handle toward the other forces the labels into a vertical stack, which can then be moved to a visually better position.
The main functional difference between the two types is in the purpose of the X axis.
In the scatter chart, both X and Y axes are Value axes—the position of each data point is determined vertically by its Y value and horizontally by its X value.
The Line chart is a Category chart. Category charts have one Value axis (here the Y axis) and one Category axis (here the X axis). Categories are equally spaced along the Category axis, and the data points' vertical position(in this example) is determined by the Y value of the point.
In your case, the difference can be seen in the (horizontal) distance between the first two samples in each series compared to the (horizontal) distance between other ajacent pairs in the same series. In the Line chart, these distances are all the same. In the Scatter chart the first pair (74° and 200°) are more widely separated than the others (each 50° higher than the temperature before it).
In cases where you are trying to show a relationship (or lack of relationship) between two sets of values (speed vs braking distance, temperature vs volume, etc.) a scatter chart usually gives a better representation.
Practical note: Values must be placed in non-Header rows and columns. Labels, including Category labels, must be placed in Header Rows or Header columns to be picked up by the chart. The formatting of the pasted data in your initial post indicates the temperatures are in a Header column. The column labels are (and should be) in a Header row.
Good luck with your project!
Regards,
Barry
PS: You might want to check the meanings of "affect" and "effect" before commiting yourself to either on your display and in your report.
PPS to Yellowbox: HI Ian. Looks like you got started earlier and/or wrote faster thn I did! Something odd happened in the example in your first post. The category labels have been offset one cata set to the right, and there's no 350.
B

SharePoint Foundation 2013 - report / chart / Graph for Employee vacation.

In SharePoint Foundation 2013 I want to create a report / chart / Graph for Employee (Employee Id,Employee Name & Department) which will show month wise from which date to which date Employee are on vacation in particular department.
I'm thinking to create one List where where user will enter there vacation details and from that list report I will create chart / Graph Department wise to check the Employees availability.
Please provide some good example or idea in detail for this.

Hi,
Chart Web Parts are useful for visually representing data in line charts, bar charts, and other views. Charts enable you and other users to view performance information at a glance.
In SharePoint 2013, chart web part is one of the discontinued features. We usually use Excel Service to replace it, however, Excel Service is only available in Enterprise edition, so we need to figure out coding methods or third party tool if you are using
Foundation edition.
Here are some links for workaround in your situation, please check if they can be help:
http://sivarajan.me/post/SharePoint-2013-Chart-WebPart-Using-HTML-5-RGraph-with-WCF-REST-Services
http://charts4sharepoint.codeplex.com/
Regards,
Rebecca Tu
TechNet Community Support

Report Engine crashing on Solaris when report with graph is given.

Hi,
We are using following environment:
Solaris 8
Oracle 9i Report Sevices.
When we try to execute reports having graphs then the report engine crashes with the following exception:
REP-0177: Error while running in remote server
REP-56048: Engine rwEng-0 crashed
The complete crash log is also appendend in the end of this mail.
When I remove the graph from the rdf then reports get exectued fine without any crash. The same rdg with graph works fine on windows NT.
If somebody can help on this, it will be great.
Thanks,
Ashish
The complete crash log is as follows:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0xf017b350
Function name=_Xm21FreeHashTable
Library=/usr/lib/libXm.so.4
Current Java thread:
     at sun.awt.motif.MWindowPeer.create(Native Method)
     at sun.awt.motif.MComponentPeer.init(MComponentPeer.java:169)
     at sun.awt.motif.MWindowPeer.init(MWindowPeer.java:86)
     at sun.awt.motif.MFramePeer.<init>(MFramePeer.java:53)
     at sun.awt.motif.MToolkit.createFrame(MToolkit.java:138)
     at java.awt.Frame.addNotify(Frame.java:353)
     at java.awt.Window.pack(Window.java:369)
     at tdg.Perspective.<init>(Perspective.java:478)
     at oracle.dss.graph.PFJ.<init>(PFJ.java:47)
     at oracle.dss.graph.Graph.createPFJ(Graph.java:1190)
     at oracle.dss.graph.Graph._setupGraphView(Graph.java:353)
     at oracle.dss.graph.Graph.<init>(Graph.java:164)
     at oracle.reports.chart.Chart.<init>(Chart.java:51)
     at oracle.reports.chart.ChartRunner.<init>(ChartRunner.java:46)
     at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
     at oracle.reports.engine.EngineImpl.run(EngineImpl.java:289)
     at oracle.reports.engine.EngineClassPOATie.run(EngineClassPOATie.java:84)
     at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:117)
     at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
     at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
     at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
     at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
     at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
     at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
     at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
     at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)
Dynamic libraries:
0x10000      /users/orarep9i/OraHome1/jdk/jre/bin/../bin/sparc/native_threads/java
0xff350000      /usr/lib/libthread.so.1
0xff390000      /usr/lib/libdl.so.1
0xff200000      /usr/lib/libc.so.1
0xff330000      /usr/platform/SUNW,Ultra-60/lib/libc_psr.so.1
0xfe480000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/client/libjvm.so
0xff2d0000      /usr/lib/libCrun.so.1
0xff1d0000      /usr/lib/libsocket.so.1
0xff100000      /usr/lib/libnsl.so.1
0xff0d0000      /usr/lib/libm.so.1
0xff310000      /usr/lib/libw.so.1
0xff0b0000      /usr/lib/libmp.so.2
0xff080000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/native_threads/libhpi.so
0xff040000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libverify.so
0xfe440000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libjava.so
0xfe410000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libzip.so
0xf3be0000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libnet.so
0xf3bc0000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libioser12.so
0xf39e0000      /usr/lib/nss_nis.so.1
0xf2000000      /users/orarep9i/OraHome1/lib/librw90.so
0xf1d00000      /users/orarep9i/OraHome1/lib/libobx90.so.0
0xf36b0000      /users/orarep9i/OraHome1/lib/librws90.so.0
0xf2a80000      /users/orarep9i/OraHome1/lib/libde90.so.0
0xf2fc0000      /users/orarep9i/OraHome1/lib/libucol90.so.0
0xf39b0000      /users/orarep9i/OraHome1/lib/libuicc90.so.0
0xf2ea0000      /users/orarep9i/OraHome1/lib/libca90.so.0
0xf35e0000      /users/orarep9i/OraHome1/lib/libmma90.so.0
0xf2dc0000      /users/orarep9i/OraHome1/lib/libmmiw90.so.0
0xf3860000      /users/orarep9i/OraHome1/lib/libmmov90.so.0
0xf2f90000      /users/orarep9i/OraHome1/lib/libmmos90.so.0
0xf2cc0000      /users/orarep9i/OraHome1/lib/libmmoi90.so.0
0xf32e0000      /users/orarep9i/OraHome1/lib/libmmia90.so.0
0xf2da0000      /users/orarep9i/OraHome1/lib/libmmft90.so.0
0xf1fc0000      /users/orarep9i/OraHome1/lib/libmmcm90.so.0
0xf1c00000      /users/orarep9i/OraHome1/lib/libvgs90.so.0
0xf2ca0000      /users/orarep9i/OraHome1/lib/libuihx90.so.0
0xf1b90000      /users/orarep9i/OraHome1/lib/libuc90.so.0
0xf1b20000      /users/orarep9i/OraHome1/lib/libuipr90.so.0
0xf1900000      /users/orarep9i/OraHome1/lib/libuimotif90.so.0
0xf1ae0000      /users/orarep9i/OraHome1/lib/libot90.so.0
0xf18a0000      /users/orarep9i/OraHome1/lib/librem90.so.0
0xf1820000      /users/orarep9i/OraHome1/lib/libree90.so.0
0xf1fa0000      /users/orarep9i/OraHome1/lib/librec90.so.0
0xf17f0000      /users/orarep9i/OraHome1/lib/libuiimg90.so.0
0xf17b0000      /users/orarep9i/OraHome1/lib/libuia90.so.0
0xf2a60000      /users/orarep9i/OraHome1/lib/libtknqap90.so.0
0xf1780000      /users/orarep9i/OraHome1/lib/libutt90.so.0
0xf1750000      /users/orarep9i/OraHome1/lib/librod90.so.0
0xf1720000      /users/orarep9i/OraHome1/lib/libror90.so.0
0xf16f0000      /users/orarep9i/OraHome1/lib/libros90.so.0
0xf16c0000      /users/orarep9i/OraHome1/lib/libuat90.so.0
0xf16a0000      /users/orarep9i/OraHome1/lib/libdfc90.so.0
0xf1680000      /users/orarep9i/OraHome1/lib/libutc90.so.0
0xf1660000      /users/orarep9i/OraHome1/lib/libutj90.so.0
0xf1630000      /users/orarep9i/OraHome1/lib/libutl90.so.0
0xf1610000      /users/orarep9i/OraHome1/lib/libsl90.so.0
0xf0c00000      /users/orarep9i/OraHome1/lib/libclntsh.so.9.0
0xf15f0000      /users/orarep9i/OraHome1/lib/libwtc9.so
0xf15d0000      /usr/lib/libsched.so.1
0xf15b0000      /usr/lib/libaio.so.1
0xf0a00000      /usr/lib/libXm.so.3
0xf1540000      /usr/lib/libXt.so.4
0xf0900000      /usr/lib/libX11.so.4
0xf1520000      /usr/lib/libgen.so.1
0xf1500000      /usr/lib/librt.so.1
0xf14e0000      /usr/lib/libSM.so.6
0xf14b0000      /usr/lib/libICE.so.6
0xf1480000      /usr/lib/libXext.so.0
0xf0bd0000      /usr/openwin/lib/libdga.so.1
0xf0bb0000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libawt.so
0xf0280000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/motif21/libmawt.so
0xf09b0000      /users/orarep9i/OraHome1/jdk/jre/bin/../lib/sparc/libmlib_image.so
0xf0000000      /usr/lib/libXm.so.4
0xf08e0000      /usr/openwin/lib/libXtst.so.1
0xeff00000      /users/orarep9i/OraHome1/jdk/jre/lib/sparc/libfontmanager.so
0xf07a0000      /usr/openwin/lib/libdps.so.5
Local Time = Fri Apr 18 09:22:09 2003
Elapsed Time = 110
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.3.1_02-b02 mixed mode)

Please try the following
* Modify $ORACLE_HOME/bin/reports.sh, replace "classic"
with "server" in the LD_LIBRARY_PATH for the JVM
* Modify $ORACLE_HOME/bin/rwengine.sh, just before the exec
command, insert the following line:
export LD_PRELOAD=$ORACLE_HOME/jdk/jre/lib/i386/libawt.so
In Linux there was a similar problem and the above workaround worked . You can give this a try .
Thanks
The Oracle Reports Team

How to draw cumulative line graph over the stacked bar chart?(SSRS)

Hello,
I need your help to draw a cumulative line graph over this bar chart.
I need your help to draw a cumulative line graph over this bar chart in SSRS.
The dimension (Category Group) is "Hour" in this case. and expression is sum of two distinct values like 'Y' and 'N' in Activity column(Series Groups). The sum(Activity=Y) in green color and sum(Activity='N') in Red color.
I require to draw a cumulative line graph in this same chart, that should give the result of cumulative Sum(Activity) for each hour?? I mean sum of (Y+N) for each hour and that should be cumulative over the hour.
I mean sum of (Y+N) for each hour and that should be cumulative over the hour.
SSRS Version details:
Microsoft SQL Server Reporting Services Designers
Version 10.50.1600.1
--Siva

Hi Siva,
It seems that you need to verify your email address to post images, etc
Besides, Microsoft® SQL Server™ 2008 Reporting Services: Step by Step is a good choice to you. With STEP BY STEP, you work at your own pace through hands-on, learn-by-doing exercises. A companion CD includes data sets and sample code. You can download
it from this link http://my.safaribooksonline.com/9780735626041 Click the Extras, you can get the samples and database from Supplemental Content.
And there are vast of valuable articles and SQL Server Reporting Services Books Online in MSDN ,you can click these link to begin your learning journey, SQL Server Reporting Services 2008 Books Online:
http://msdn.microsoft.com/en-us/library/ms159106(v=SQL.100).aspx
Besides these, there are still many valuable videos in Microsoft Webcast, click this link
https://msevents.microsoft.com/cui/SearchDisplay.aspx?culture=en-US#culture=en-US;eventType=0;sortKey=;sortOrder=;pageEvent=false;hdnInitialCount=;searchcontrol=yes;kwdAny=Reporting%20service to register with a windows live ID, then download the ones you
want.
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

Report Line Graph Question

Similar Messages

Maybe you are looking for