Report Linking Error on WeSubmitButton on WebElementsBasicFunctionality.rpt

Report Linking Error STR_ID:IDS_OPENDOC_REPORT_SOURCE_ERRORAfter installing Web Elements 2.1BOE XI R1, SP3 and Crystal Reports XI R1 SP3 are installed.WEPlatform is set to "XI.NET"Using ODBC datasource Xtreme Enterprise 11 Sample Database, not 11.5.Thanks in Advance, Randy R. Creller703 324-4532 Any Help would be greatly appreciated. P.S. I was able to get this to work using IdType=Id and using the report ID in the SubmitButton formula on the TargetPath Call.I really need an example of the fully qualified Folders in the URL . If someone could provide this for me that would be great!

the error that you are receiving is most likely due to a name resolution issue...check to see that the name of the report in your enterprise environment matches exactly with the name in the WESubmit formulae.if you're using a december 18th version of the report (date is in the page header PH section) then the name of the report in enterprise should be webElementsBasicFunctionalitynote that having a .rpt extension in the enterprise environment in this case will cause name resolution issues...i.e. webElementsBasicFunctionality.rpt is not the same as webElementsBasicFunctionalityjw

Similar Messages

Report Linking Error

We encounter this problem when trying to hyperlink between reports:
Error Msg: Report Linking Error. There was an error retrieving data from server.
When linking to one report via another using hyperlinks of length greater than 1200 characters we receive a u2018Report Linkingu2019 error. Hyperlinks of lower than 1200 characters work fine.
Browser: Using Internet explorer version: 6
BO version: BOXI R2 SP3
(cut and paste from an engineer on my team).
Any thoughts?

hello,
getreportsource is the error when a url is being resolved by opendocument and the target cannot be found in your enterprise environment or there is a conflict with a target name.
1) ensure that you are running the report in infoview. if you are running the report in the report designer's html preview you are going to have issues as it is not really for these pass through html methods. you can get the odd thing to work but it should really be run in the destination (infoview) environment to test out interactivity.
2) do a search for webelementsbasicfunctionality in your infoview search...ensure that there is only one copy of the report in the entire repository or there will be name conflicts...the urls being generated in these examples use name resolution (with no folder hierarchy) to make publishing easier.

Crystal Report issue : Error in file.. .rpt . Error in formula

Hi ,
I recently migrated a report from production to test environemnt and it throws me the following error:
Error in File C:\DOCUME1\oe_user\LOCALS1\Temp\packing instructions {4058873B-9756-4052-B479-EBD2D0A08E7D}.rpt:Error in formula <Object_Visibility>. '{Command.EXACT_WEIGHT_FLAG} = "Ne (No)"'
This field name is not known.
In production server is installed Oracle 9i database and in test server is installed Oracle 10g
The report has 1 main report and 2 sub reports.
1. The same report works fine in production server without any issues.
2. I had executed the report in Crystal reports 2008 and it runs fine displaying all fields without any issues.
3. I had also tried taking the query of both subreports and the main report and tried executing it in oracle and it runs fine without any issues.
However during the runtime in the test server, it throws the following error.
Can someone help me out with this issue..

Hi Siva,
What is the patch level of CR 2008?
Is it a win or a web app?
What is the server OS?
First, try to simply view the report. Let the report prompt for the database credentials and the parameter values if any.
See if it reproduces the issue.
ReportDocument rd = new ReportDocument();
rd.Load(Server.MapPath("CrystalReport.rpt"));
CrystalReportViewer1.ReportSource = rd;
Take a look at the SAP Note :
[1421867 - Error: This field name is not known|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433323331333833363337%7D.do]
Hope it helps,
Thanks,
Bhushan.

Error In ECC For Crystal Report Containing Sub-Report Link

Hi,
We are using Crystal Reports 2013. We extracted a Crystal Report from SAP ECC to modify it further utilizing the features of Crystal and export it back to SAP ECC.
The updated Crystal Report has a Sub-Report link within it, while exporting it back to SAP ECC, we get the attached error message as "layout.subreport should not contain any data connections".
However, on removing the Sub-Report link, the report can be successfully exported back to ECC and executes without any issues.
Is there any limitation on features to be used when exporting Crystal Reports to ECC?
Thanks & Regards,
Mitalee

Hi
I am facing the same issue when I try to open Crystal report Olap Grid via .net Crystal Report Viewer.
Getting the error message like not able to open OLAP Cube.
Please need urgent solution
Thanks a lot,
Usha

Error on BW reports link

Currently we're experiencing an error on our BW reports link wherein our BW reports thru Internet Explorer can not be displayed. By clicking one of the reports the page can't be displayed. Currently what we are doing just to resolve the problem is to restart our BWserv using stopsap then startsap just to refresh the server. After that everything is normal again. Can you please help me isolate what causes the problem inorder to prevent this from happening again.

for the BW webreports to work
the ICMAN (internet communication manager) should be running which you can check from transaction SMICM
and sap/bw/BEX node should be active in transaction SICF
Regards
Raja

MS SQL Server 2014 Report Services Link error

I have installed SQL Server 2014 with Report builder 3 for 2014 report builder is perfect working, but report services is not working when click on this link "http://microsoft:80/ReportServer" then message is alerted " Reporting
Services error" The permissions granted to user 'Microsoft\MCSD'
are insufficient for performing this operation. (rsAccessDenied)and when click on this link "http://microsoft:80/Reports" then message is alerted:
"User 'Microsoft\MCSD' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed."
i am using MCSD account as administrator so how resolve this problem?

Hi Visio,
I think this issue can be caused by BUILTIN\Administrators might be deleted by someone else. Local Administrators group is equal to BUILTIN\Administrators group on Report Manager. By default, BUILTIN\Administrators user is granted with Content Manger Role.
When someone delete the BUILTIN\Administrators group in the Folder Settings, Local Administrators group cannot access report manager and report server any more.
To fix this issue, please use an account which has access to report server to assign some sufficient permissions to the account “Microsoft\MCSD”.
Another possible is the operating systems limit the overuse of elevated permissions by removing administrator permissions when accessing applications. To fix this issue, please open the Report Manager in Internet Explorer with Run as administrator option.
References:
http://technet.microsoft.com/en-us/library/aa337491(v=sql.105).aspx
http://social.technet.microsoft.com/Forums/exchange/en-US/f095f769-2081-4173-ac16-b806941f0811/uireportmanager01219c08072014161821-e-error?forum=sqlreportingservices
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Problem "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider for linked server"

hi
i'd like to ask question about linked server.
my linked server used to work but now when i try to select from linked server i was told "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider
for linked server"
but in fact for test connection i was told "the test connection to the linked server succeeded".
could anyone help me? thank u very much
best regards
martin

Hi,
In addition to Tracy's post we have to know those answers as well:
* what provider are you using for the connection
* what do you connect to
for example, if someone try to connect to oracle using sql server provider then several simple queries are going to work probably OK, but once you are trying to use T-SQL or any complex SQL query then the errors are starting.
please post the connection string (without the password!) + the query that you are trying to use.
[Personal Site] [Blog] [Facebook]

Where is Report an error link

I have some tracks on a recently downloaded album which are finishing early and jumping to the next track. Was told by apple support page to select track in my purchase history and click "Report an error link". Can't find that link. Where is it?

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the problem tracks from your iTunes library, close and then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the "Report a problem" links in your account history (Store > View My Account...), or via Contact Support.
See also:
HT5085 - iTunes in the Cloud and iTunes Match Availability
HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

Intermittent "Load Report Failed" error on IIS6 ASP 4.0

I can run reports designed in Crystal 2011 and embedded in VS2010 designed web pages on a Windows 2003 SP2 server every day. However, once every 2 - 3 days I get a "Load Report Failed - A document processed by the JRC engine cannot be opened in the C++ stack". The first instance of this error causes all subsequent user access to Crystal Reports to fail with the same error. When the ASP 4.0 application pool is recycled the error goes away.
I was getting the "Load Report Failed" error due to "out of memory" I until made sure that the crystalreportviewer.dispose was run on exiting each report page.
Here is how I run Crystal Reports:
   Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
        If Not IsPostBack Then
            Dim myAL As New Hashtable
            myAL.Add("MO1", Request.QueryString("MONum1"))
            myAL.Add("MO2", Request.QueryString("MONum1"))
            Dim filename As String = ""
            filename = Server.MapPath("~/reports") + "\MfgPicklistByMO.rpt"
            Dim u As New CrystalUtilities
            Session("crViewer") = u.SetupReport(filename, myAL)
        End If
        CrystalReportViewer1.ReportSource = Session("crViewer")
    End Sub
   Public Function SetupReport(ByVal fileName As String, _
                 ByVal Params As Hashtable, Optional ByVal dbParam As Boolean = True) As   CrystalDecisions.CrystalReports.Engine.ReportDocument
        Dim objCrystalReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument
        objCrystalReportDocument.Load(fileName)
.... logs onto a selected database, and loads paramters

I have installed CrystalReportViewer1.Dispose() statements on all of the link events to navigate out of the pages with the CrystalViewer. However, it turns out that several users are using the back arrow to navigate out of the page instead of the navigation links I have put on the page.
I can't seem to find any event in ASPNET 4 that fires when the back arrow is pushed. If I could find such an event I could put a CrystalReportViewer1.dispose statement there assuming CrystalReportViewer1 still has scope.    The Page_Disposed event does not fire when the back arrow is pushed.
Environment: VS2010, Crystall 2011, ASPNET 4.0

Crystal report unexpected error in Web service (IIS)

We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
            Xception E NSF      NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 [GUEC0001] [1] [AbstractService] Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
            Xception E NSF      NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 [GUEC0001] [1] [AbstractService]    at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
               at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
               at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
               at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
               at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
               at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
               at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
               at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
               at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
               at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
               at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
               at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in Advance

What is the workflow
What is the application doing?
Iu2019m guessing you have a windows service application and you're trying to launch a UI (ie the viewer control) from the application or print using the vieweru2019s printing functionality programmatically(?).
If this is a Windows Service running under the local system account, then follow the instructions in the error message. (ie, bring up the properties of the service, go to the logon tab and check the checkbox that says u201CAllow service to interact with desktopu201D.   At least that should allow whatever popup is trying to come up display properly.
Ludek

Crystal Report Runtime Error 9.0.Could not open the report

Hi,
Getting the Crystal Report Runtime Error 9.0.Could not open the report while Run on Launch Application. Actually in Launch Application, created a link for exe which is having crystal reports. We can open the Crystal Reports from the exe outside B1.
Note: SAP 2007, Crystal Report 2008 is using.Normally can open crystal report.
Any help to fix the error is appreciated.
Thanks & Regards,
Parvatha Solai.N

Hi,
Please post screen shot of error message here.
Thanks & Regards,
Nagarajan

Crystal Report XI Error:717

Error:717
Hi,
We use Crystal Report XI developer with Oracle 10g.
Our Oracle Client is Oracle 10g and the Oracle server is Oracle 10g.
Our application develepor tool is CodeGear RAD Studio, Delphi 2007 Enterprise.
The Crystal Report use the Native Oracle Connection.
When the applicatin run, and we call the Crystal Report, an error occure:
Error:717 Error in file c:sample.rpt
Failed to load database information
Execute
Please help me!
Thanks
Sándor Lencsé

I would make verify the database within Crystal report and then re publish it again. It seems it doesn't get the connection to the db.
Have you refreshed the database within Crystal Reports?
As Graham said, does it open in Crystal Viewer?
another thing would be to add the DSN (System DSN) onto your client machine as well. Maybe it is not getting a right connection.
Try it and let us know.
Kind Regards
Jehanzeb

Crystal Report Previewing Error

Dear Experts,
After previewing the Crystal Reports, the error message shown like this:
http://i775.photobucket.com/albums/yy34/erpkenny/CrystalReport_jpg_02JUL.jpg/
Please kindly help me!
Thanks!
Kenny

hi,
Check the below link:
Application has a problem - Printing Problem
Thanks,
Neetu

Downloading a file from a report link

I have a report link that sends a couple parameters to a secondary page.
The secondary page has a process in it that selects a blob file from a table and then downloads that file.
However, there is no browser download file dialog window that pops-up when the link is clicked.
The file just displays in the browser. So, I'm thinking I have something wrong with my MIME header.
The process that downloads the file is:
<code>
DECLARE
l_length NUMBER;
l_lob_loc BLOB := EMPTY_BLOB();
l_mime_type warm_files.mime_type%TYPE;
BEGIN
apex_application.g_page_text_generated := true;
apex_application.g_unrecoverable_error := true;
select blob_content, dbms_lob.getlength(blob_content), mime_type
into l_lob_loc, l_length, l_mime_type
from WARM_FILES
where context_id = :P12_CONTEXT_ID
and file_id = :P12_FILE_ID
-- set up HTTP header
OWA_UTIL.mime_header (l_mime_type, FALSE);
-- set the size so the browser knows how much to download
HTP.p ('Content-length: ' || l_length);
-- close the headers
OWA_UTIL.http_header_close;
-- download the BLOB
wpg_docload.download_file (l_lob_loc);
END;
</code>
The :P12 variables are the parameters coming in from the link.
There are no errors. The file just displays in the browser window.
Any clues as to what I'm missing are greatly appreciated.
Thanks in advance.
alan.
Edited by: semaphore on Dec 11, 2009 9:14 AM

Hi Alan,
try this...
This is my procedure which I adapted to yours...
<code>
DECLARE
l_length NUMBER;
l_lob_loc BLOB := EMPTY_BLOB();
l_mime_type warm_files.mime_type%TYPE;
l_file_name VARCHAR2(2000);
BEGIN
apex_application.g_page_text_generated := true;
apex_application.g_unrecoverable_error := true;
SELECT null,
BLOB_CONTENT,
name,
DBMS_LOB.GETLENGTH(blob_content)
INTO l_mime_type,
l_lob_loc,
l_file_name,
l_length
from WARM_FILES
where context_id = :P12_CONTEXT_ID
and file_id = :P12_FILE_ID;
-- set up HTTP header
owa_util.mime_header( nvl(l_mime_type,'application/octet'), FALSE );
-- set the size so the browser knows how much to download
HTP.p ('Content-length: ' || l_length);
-- the filename will be used by the browser if the users does a save as
htp.p('Content-Disposition: attachment; filename="'||substr(l_file_name,instr(l_file_name,'/')+1)|| '"');
-- close the headers
OWA_UTIL.http_header_close;
-- download the BLOB
wpg_docload.download_file (l_lob_loc);
END;
</code>
Hope it helps.
Regards, Zlatko Matanic

HP Scan (Officejet Pro 8600) reports an error

I'm having several problems with scanning. I am using HP Scan Version 4.4.1 (21) on a MacBook Pro running Mavericks - 10.9.1. This is installed as part of the v12.34.37 Mac OS Driver/Application Suite for Mavericks.
1. Scanner reported an error (An error occurred during scanning.)
This occurs having selected 'Scan' from the HP Scan Menu, I then select Type, but only have the 'Automatic' option available to me.
2. I no longer have access to change settings on the Scanner Presets Menu. I can't select any of the options (Source, Orientation, Mode, Resolution, Crop to) and I also seem to have lost the 'manual' double-sided option (which alongside the lack of twain driver was a shocking omission from this model, and an enormous dissappointment).
See the image below: -
3. Scan to computer (scanning to PDF or JPG)
Having selected a computer from the list, the scanner is unsuccessful. The error message is: -
Scan Unsuccessful
The HP Scan dialogue briefly appears on screen and displays the message 'Preparing to Scan'.
The scan could not be completed due to one or more of the following issues:
- Connection to the computer is lost
- The scan application on the computer is currently in use
- OCR application is not installed on the computer
See the computer monitor for details (there is no information on screen).
I can scan from the webscan applicaiton, and eprint is configured correctly if that has any bearing on the response!
I hope that this is enough information to get the problem diagnosed/solved, but if not, please let me know what else you need!
Thanks!!

Hi,
I've got around to runing the tests you recommended.
The power cycle did not work.
I then ran the troubleshooting from the recommended link for Mavericks which is what I am running.
Solution one: There are no other users using the scanner, just one connection from my computer.
Solution two: Scan to computer checked, and printer sharing switched on. Still no scan.
Solution three: Repair Disk. This resulted in the following: -
2014-03-02 15:41:07 +0000: Disk Utility started.
2014-03-02 15:44:11 +0000: Repairing permissions for “Macintosh HD”
2014-03-02 15:44:20 +0000: Group differs on “Library/Printers/InstalledPrinters.plist”; should be 80; group is 0.
2014-03-02 15:44:20 +0000: Permissions differ on “Library/Printers/InstalledPrinters.plist”; should be -rw-rw-rw- ; they are -rw-r--r-- .
2014-03-02 15:44:20 +0000: Repaired “Library/Printers/InstalledPrinters.plist”
2014-03-02 15:45:51 +0000:
2014-03-02 15:45:51 +0000: Permissions repair complete
2014-03-02 15:45:51 +0000:
2014-03-02 15:45:51 +0000:
This did not solve the problem.
Solution four: Uninstall and reinstall the software. The scan to computer feature is still not working.
I am still without a working scanning feature. I may look at returning the printer and exchanging it for a different make or model - this is harder than it should be.

Report Linking Error on WeSubmitButton on WebElementsBasicFunctionality.rpt

Similar Messages

Maybe you are looking for