Report makes slow down

I have some problem of performance due to the report generation.
If I do not use "on the fly reporting", performance are ok, each item of my loop takes the same time. But I have nothing in the report.
If I use "on the fly reporting", performance are bad, ecah item of my loop take more and more time which becomes inacceptable. On the contrary, my report is ok.
Is possible to have a report without disturbing and slow down the execution of the sequence ?
Thanks a lot for your support.

Hey sfl,
The short answer is NO.
Basically on the fly reporting is being updated everytime a step that records results gets executed. So you have to store that in memory. How many steps do you have? If you have a bunch of steps and your report is really long then you will see performance drop dramatically.
So you have to choose one or the other unfortunately.
Regards,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Similar Messages

Crystal Report 9 slow down when we move old DB to new DB server

We are using Crystal Reports 9 version, recently we move to new database server and reports data source are pointing to Old database server and old database server is no longer in the network.
Now we have issue with the performance when we call the reports from web application, it is talking long time to retrieve the simple report data(e.g. 1 min.). , if we manually update the report data source pointing to new server and the reports are pulling data very quickly.(e.g. 1 second for the same report) Is there any easy solution to bulk update all the reports datasource pointing to new server, we have 1000 reports, we can not use manual process, it will take long time and it is also issue with the future if we change the server.
Thanks for your help!
Ram
Edited by: ram vaishnapu on Aug 8, 2008 8:09 PM
Edited by: ram vaishnapu on Aug 8, 2008 8:12 PM

The 1 minute timeout is due to ODBC driver trying to connect, it's the default timeout you are seeing. There is not tool Cr has to migrate/update database connection info. You can develop your own though or search the web for a third party tool, I'm sure there are lots out there.

Report Slow Down

We have a report that used to produce a 1000+ page pdf in
about 2 minutes. It has gone to producing a 200+ page report in
about the same amount of time. No change to the data, database,
report or environment, it just suddenly slowed down and nothing
seems to be able to make it go back to decent performance on large
record sets.
Server reboots don't help, any ideas or thoughts would be
appreciated.

Hello
I followed some Donald's suggestion and went through some explanations he's given on its web site to try to figure out how could I speed up the database 10g since we migrated from 8i to 10g.
Here are default values in our 10g influencing the COST BASE OPTIMIZER
OPTIMIZER_FEATURES_ENABLE=10.2.0.1
OPTIMIZER_MODE=ALL_ROWS
OPTIMIZER_INDEX_COST_ADJ=100
I launched his script below provided to see time waited between full scan table
('db file scattered read representing by the c3 row and the
sequential read representing by the c4 row)
select
sum(a.time_waited_micro)/sum(a.total_waits)/1000000 c1,
sum(b.time_waited_micro)/sum(b.total_waits)/1000000 c2,
sum(a.total_waits) /
sum(a.total_waits + b.total_waits)
) * 100 c3,
sum(b.total_waits) /
sum(a.total_waits + b.total_waits)
) * 100 c4,
sum(b.time_waited_micro)/sum(b.total_waits))/
(sum(a.time_waited_micro)/sum(a.total_waits)
) * 100 c5
from
dba_hist_system_event a,
dba_hist_system_event b
where
a.snap_id = b.snap_id
and
a.event_name = 'db file scattered read'
and
b.event_name = 'db file sequential read';
there is the output of the script
C1 C2 C3 C4 C5
.002438964 .002888595 24.6526611 75.3473389 118.435332
So the time waited for full scan(c3) table is most faster than index sequential read(c4:index probe)
I changed the parameter OPTIMIZER_INDEX_COST_ADJ and OPTIMIZER_MODE
alter system set OPTIMIZER_INDEX_COST_ADJ=20 scope=both;
alter system set OPTIMIZER_MODE=FIRST_ROWS_1000 scope=both;
I lauched aigain the script above, but the output shows the result below
C1 C2 C3 C4 C5
.002438964 .002888595 24.6526611 75.3473389 118.435332
this output isn't different than the first one, so does this mean that INDEXES are not well designed or WHAT ELSE?.
Wich parameter could I enable or change to decrease the C4(index sequential read wait time?
Thank you for your help

Crystal Reporter Integration addon 2.0.07 slow down

Hi Guru's,
When i upgraded to Crystal Report Viewer Add On to version 2.0.07, I encountered slow down accessing Crystal Reports Administration and generation of report. We also encountered lots of error. Is there any new Crystal Reporter Integration addon version?
Thanks....

Hi..
It might be of you have not installed Prerequisite .NET Framework 3.5 SP1 & Crystal Report Runtime Viewer.
Regards,
Bhavank

How to make slow reports fast?

Hi all,
How to make slow reports fast? What could be the various reasons and optimizations/solutions?
Thanks,
Charles.
++++++++++++++++++++++++++++++

Its an on going process. Couple of steps you will have to follow: Did you perform any SQL trace ..?
Did you perform any ABAP trace...?
How much business data these reports are processing.Is there a possibility you can do some changes.
SQL Trace ( SAP in built tool) will give you a fair idea about each and every SQL statements in your report. And you can anlyze bad ones. And also propse optimized SQL or
index if needed.
ABAP Trace(SAP in bulit tool), you can find out amount of ABAP run time thats being elapsed by each and individual abap module.
Also the amount of business data is every important. While designing the report alogorithm this is very important factor.

How do I make CS4 not blur frames together when I slow down footage.

I'm trying to get an effect similar to the oppening credits of Reservior Dogs, but whenever I slow down video, Premiere makes it look all ultra-smooth, which would be nice in most cases but in this one I want to just leave the frames as they are and not have any motion-smoothing. Any advice?

Okay, the Posterize Time effect didn't work (I just ended up with a blank screen), BUT, I found that when I export the video at the frame-rate I want it to be, it creates the effect perfectly. Thanks for your help anyway!

Since downloading OS X Yosemite I have been having issues with Netflix. Video slows down which causes the audio to go out of sync. Netflix plays ok on ipad which makes me think it's the software which is the issue. Has anyone else had this issue?

Since downloading OS X Yosemite I have been having issues with Netflix. Video slows down which causes the audio to go out of sync. Netflix plays ok on ipad which makes me think it's the software which is the issue. Has anyone else had this issue?

Try this:
Go to System Preferences - Bluetooth. Delete the keyboard from the list of devices by pressing the "-" button. Take the batteries out of the keyboard and reinsert them. In Bluetooth Preferences press the '+" button to add the new device. If the keyboard begins to pair, click the word "pair" and type in the passcode. Press return. The keyboard is now paired.
If the mouse is not pairing, try this: shut down the computer completely, unplug any USB mice, then turn off the power to the bluetooth mouse. ONce the computer starts up again, wait for the pop-up looking for a mouse. Turn on the power to the bluetooth mouse. It should work normally now.

Why can't i access my itunes anymore? whenever i click on it, it makes my laptop freeze/slow down to the point where not even ctrl alt delete works properly and i have to turn the laptop off and then back on to get anything done.

why can't i access my itunes anymore? whenever i click on it, it makes my laptop freeze/slow down to the point where not even ctrl alt delete works properly and i have to turn the laptop off and then back on to get anything done. it has been this way for the last 2/3 days now and i have uninstalled and reinstalled it but it doesnt work

Hello there, bobbiefromIRL.
The following Knowledge Base article goes over some great steps for troubleshooting your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How do you make a clip slow down

I'm new to final cut so I hope this question(s) isn't too naive. First of all I have imported a clip that has a world turning right before a transition into something else I don't want (ie I only want the world spinning). But whenever I select the range I want, and remove the rest, if drag the desired clip longer the old (unwanted material shows). So clearly I'm not cutting or deleting properly. Assuming I have the clip I want, the other problem is that I'm trying to match it to audio which is considerably longer (like 6 minutes versus 40 seconds). There is no obvious place to cut and make a copy (loop) without it being noticeable, so I thought it might be better to simply make the clip run in slow motion and match the duration to the audio clip. How do you do this?

Simple. Select the clip (or portion of the clip) you want to slow down. Go to the "Modify" menu, then go to "speed." Type in a new percentage (50%, for instance, will make the clip run at half speed). I also suggest checking the "frame blending" box....it should make the slowed-down clip look smoother (you can try it both ways and see what looks best to you). Then render the clip (from the "Sequence" menu) and you're done.

How can Logic make tracks slow down like an old record slowing down?

If anyone skilled know this, I need to get my entire tracks to " slows down" as a record that just loosing the motor....I have audio tracks and some spectronics /ESX24 also in the set.
I need to make this goes down and efter 1 second to speed up again...
I am working in 48Khz and Logic 9.1.1 and 5.1 sorround.
Maybe I am missing something easy, or maybe it is are harder to get.....
Hopefully a "mastermind" can help me out!
Message was edited by: Host (to clarify subject)

Danke, thank you....!!
I was messing around with flex and felt it was not really obvious to make it there.....
I will do this!
Thanks for helping me out here!

After upgrading to Yosemite, MF 820 ZTE Telenor USB modem does not start, system slow down dramatically / Macbook Pro Retina late 2012/. Also Thunderbolt plug in for Ethernet make the same ! Any idea ?

After upgrading to Yosemite, If i plug in my Zte MF 820 LTE modem into my Macbook Pro USB socket or a Thunderbolt USB Ethernet converter/ into my Notebook, it slow down dramatically the system, unusable, need to reboot and unplug the USB moderm or Thunderbolt interface. So it does work only without any plug in device..!?
Any idea ?

How To Run Telia ZTE MF820D 4G Modem On Lion
Open Network Preferences
Choose the ZTEUSBModem interface
Set “Configuration” to Default
Set “Phone Number” to *99#
Leave “User Name” and “Password” blank.
Check the “Show modem status in menu bar” checkbox for convenience.
Click “Advanced…”
Set “Vendor” to Other
Set “Model” to ZTE USB Modem.
Now click the little phone in the menubar and choose “Connect” from the dropdown.
Link: http://walternaeslund.com/how-to-run-telia-zte-mf820d-4g-modem-on-lion/
I'm using MacBook Pro Yosemite 10.10 and a MF820 too.I had a same problem before.But Now already fixed.
Hope this can help you.
Regrad
Amare YSL

Flash html5 - How can i make an internal movie clip slow down and stop when it get to a certain frame?

I am creating an automotive braking system using flash and have a wheel turning. I want the wheel to slow down and stop after the brake pedal is pushed at a certain frame. I know I could do this with frame by frame animation but was hoping there was a short cut - javascript?? If not the slowing down portion then is there code for just making the internal movie clip (wheel turning) to stop when it gets to a frame.? Thanks

you can use the ticker class to create a loop that you use to control the wheel's rotation or frame, TweenJS v0.6.0 API Documentation : Ticker

Is your ios 8 slowing down your device a lot and make it unusable?Read this !

So lot of people told me that their ios 8 is slowing down their performance...Well im happy to tell you that this monday will be released the IOS 8.1 with a lot of bug fixes.So just wait for this monday

I already watched the ENTIRE Keynote.
The only mention was improvements in iOS 8.1 and additions like iCloud Photo Library.
There was no mention of what these "improvements" are going to be and whether or not this is good news for lPad 2 or 3 owners.
So, again, like I stated,we'll have to wait until Monday and see.
Still a a big question mark to what iOS 8.1 will or will not correct.

WRT54G slows down speed and makes many downloads fail

I can't get utube videos when I'm going through the router. I can get them if I'm on the modem only. The same applies to long PDFs, software updates, long virus definition updates, videos in general and graphics heavy websites. It just slows down eventually to a standstill and the download fails. As stated when the router is not connected the above items pop up or download reasonably quickly through the modem. We have moderate speed DSL.
Help!

So the concern that you explained is that you cannot run videos,PDF's or any software updates while connected through router.. So in that case you need to upgrade the firmware of the Router which can be downloaded from the Cisco website ( homesupport.cisco.com )...
Then reset the Router and power cycle the whole network....
Once done with that you have to reconfigure the Router again according to ISP ( Internet Service Provider ) setup...
Disable the anti-virus and security centers if any...

Internet speeds keep slowing down to a crawl

I'm having a problem that has only developed in the past week which was during a time when I haven't changed any configurations in that period of time since my son was born a week ago yesterday and I obviously had more important things to do than mess with my network configurations. However, about 2 weeks prior to his birth, in the process of configuring a baby monitoring system with icam source, 3 weeks or so ago, I read that I might be able to improve my internet performance, I ran googles namebench a couple of times and added and re-ordered the DNS servers that had been listed prior to any problems developing based on its' reports. My internet speeds improved as a result of changing those DNS settings and stayed good until the past week. But of course, we now need to use the computer as part of our baby monitoring system and it's not working worth a **** and I'm getting frustrated since I can't put my finger on the problem and I don't really have time to spin around in circles right now. I'm sure it's probably something simple and I can't put my finger on it though. Sleep deprivation is new to me.......
I've kept running log of notes so this is a little deshoveled but I figured the more information I provide the better the chance someone might help me get this solved quickly.
In the last week, since my sons birth, my internet speeds would be okay after restarts and resetting everything, 2.5 Mbps or so but after a 10-15 minutes it starts to slow down to .2-.3 Mbps. I went thru all my network settings, restarted everything, repaired permissions, I've changed ethernet cables reset PRAM, firewall is running, stealth mode enabled, allow signed software incoming connections and my various other programs such as netsessionmac4f3c6b, skype, java, itunes, etc.
All sharing services off and pretty basic login items at startup including growl.
I had AT&T come out and check my DSL line and everything checked out on their end up to and out of the DSL modem based in their equipment tests.
The problem seems to start when I connect my imac (a fairly loaded 27" imac I got in Dec.) First off, as soon as the imac is connected to the modem via ethernet, the old ethernet modem flashes and continues to flash, even right after startup. So the tech thought something was running in the background and I can't figure out what. I looked through login items but don't see anything that would be a problem and am afraid to eliminate everything.
So I created a guest account to eliminate any login items (I think) and in I got 5.69 Mbps right off the bat. But after a minute or two, without changing anything my download speed slows down and I get for example .77 Mbps. The same thing happens with my administrator account on the imac. Fast speeds at startup and more importantly if I change the configuration by switching between ethernet and airport, I get fast speeds right after changing the configuration but after a minute or two I am well below 1.0 Mbps. I've got several network configurations with automatic, airport and ethernet set up in different ways including a clean ethernet connection with the original DNS settings.
I haven't set up an airport only account but that really isn't the way I want to hook up the computer that sits right next to the modem and runs my network. Restarting the old modem and direct connecting the computer to the modem results in the same thing happening.
I connected my ethernet from the (old?) modem directly to my ancient powerbook G4 and I got +5.6 Mbps download but it also slowed down to 300 kbps after 5 minutes or so the first time (old modem?)
Now to explain why I have "old?" listed above. I was then able to get a new DSL modem from AT&T, hook it up just fine, get enormously faster internet service in the 5,000 kbps only to have it slow back down to around 300 kpbs after connected for several minutes.
directly connected to imac-bypassing router
3,500 kbps
after 15 minutes-250 kbps
connected to imac thru router/time capsule with airport extreme
2500 kbps
after 15 minutes=166 kbps
directly connected to an older powerbook G4 with new modem
IP address of 192.168.1.64
5.65 Mbps on speedtest
after 15 minutes=5.67 Mbps
after 30 minutes= 5.59 Mbps
1 hour-5.66 Mbps
Very solid, stable readings for what I am used to. This would seem to isolate the problem to the imac.
directly connected to imac with new modem
IP address of 192.168.1.64
5.8 Mbps on speedtest
after 30 minutes= .60 Mbps-ping takes 250 ms
1 hour= .46 Mbps-ping takes 250 ms
Now a problem that only started last night after I hooked up the new modem and started up my old Time capsule/airport configuration, I got a message that said something to effect of "another device on this network is using computer IP address 192.168.1.64. So I tried manually changing last digit of the IP address on the computer to one number higher and it kept saying the start and end range were incorrect so I shut the airport station down since when it was connected, it would not allow the computer to connect thru the router via ethernet. I did a hard reset on the airport and I got it back up and running just fine but the internet speeds on the imacs' ethernet connections are so slow it's practically worthless. I also checked to see what was connected to my airport on any given occasion, 2 iphones, 2 pads, another imac running upstairs and a newer powerbook running icam source that is supposed to be the baby monitor. Except for the laptop everything can use "802.11n" but the powerbook only connects via 802.11g so I have set the airport to that limiting setting.
Any suggestions? Is there a way for me to log what is happening so I can report in more detail?

First thing is to check if the wireless is on a sensible channel: HomeHub doesn't always make sensible choices. Install inSSIDer on your laptop and see what other devices there are around and if there is any clash. Also, try moving the HomeHub around a little, even quite small differences can make a big difference to wireless signals.
You could run an ethernet cable from downstairs to upstairs. Easy to do, but can be a bit unsightly. If most of your devices are upstairs, you could use this cable to connect the modem to the HomeHub. If you have devices both up and down, you may want to keep the HomeHub downstairs and add a switch upstairs.
HomePlug may be suitable for you. If you search Amazon for HomePlug you will see a couple of kits for just over £30. Don't go for an 85Mbps one. A 200Mbps such as the TP-link or D-Link should be much better than wireless, but not as good as a cable.
Depending excatly how many devices you want to connect and where, you can pay more and have a builtin wireless at one end: http://www.amazon.co.uk/Devolo-1408-Wireless-N-HomePlug-Adapter/dp/B00472MMCQ/ref=sr_1_15?ie=UTF8&qi... Or it may be best for you to use the basic devices and add an old wireless router in switch mode.

Report makes slow down

Similar Messages

Maybe you are looking for