Report of PO created by PRs and POs with RFQ

Hi SAP Gurus,
Pls Help me in Finding some Important Reports
like,
1, List of POs created with PRs only and list Of POs created with out PRs
2, List of POs created with RFQ only and list Of POs created with out RFQs
3, List of only those POs for which GR is Made and Invoice pending.
4, List of only those POs for which GR is Made and Invoice pending.
5 list of vendors for whom after GR,
No invoice is made,
Partial Invoice is made
and those for which complete invoice is made,
and any other Important Management Report that can be Usefull to Management.
pls Respond as it is urgent.
Regards
Sathish

Thanks a Lot for your Replies
I tried making use of Dynamic Selection Procedure, but could actually Make any use of it Effectively
the Purchasing Docu Header and
Purchasing Docu Item
gives option of selecting so Many fields i tried to Get the list of POs Created Using RFQs and also POs by using PRs ( not Vise Versa as it is available in Std report) but Failed to get a list,
Can any one please Explain me How to use The Dynamic selection Tab for creating a specific report,
I have heard that through Quires we could generate our Own Report,
Pls throw some light on this Subject,
Is there any thing Like Management Reports in SAP MM which intrests the Top
anagement ( CEO and CMD ) pls Forward this to me as i need it Urgently.
Thanks and Regards
Sathish

Similar Messages

How to create Schema Header and footer with Pipe delimiter file..?

Hi all,
I have issue with creating Schema Header and footer with body file ..The file format is Pipe delimiter.. The follwing file below like is...
Adapters:File Adapter(Read)-11g.
1|000|2025|SDFG|54787
1|2055|244|9566|000|000|044|2577|361147|45554|wweqw|52555|564|000|647|464
1|2027|344|4566|000|000|044|8577|361147|45554|wweqw|82555|564|000|647|844
1|2024|444|6566|000|000|044|9577|361147|45554|wweqw|12555|564|000|647|544
1|2023|544|8566|000|000|044|5577|361147|45554|wweqw|52555|564|000|647|442
1|2022|644|3566|000|000|044|7577|361147|45554|wweqw|02555|564|000|647|448
1|0000|546|25544|454
If you have sollution for this, please help me out..Thank you.

You mean how many rows or columns..?
If coloumns means 5 and rows only one(1).

How to create portal user and integrate with external appl login

How to create portal user and integrate the user with external application for single sign-on ?
I want to access my external application thru portal user ..?
Shyam

Hi Jithin,
The link that you've shared talks about a different scenario.
In my case, I want to pass the portal user id when the user clicks on the Help Link present in the header area.
I am trying to pass it along with the Help Link Url property of a masthead iview but it is not getting passed to the target Url.
I would like to know if it is possible to pass the Portal User Id in this way or not.
Though if we create a appintegrator iview and pass the user id <User.UserID> along with the target Url, it reaches there.
Thanks & Regards,
Anurag

What is the best practice for creating master pages and styles with translated text?

I format translated text all the time for my company. I want to create a set of master pages and styles for each language and then import those styles into future translated documents. That way, the formatting can be done quickly and easily.
What are the best practices for doing this? As a company this has been tried in the past, but without success. I'd like to know what other people are doing in this regard.
Thank you!

I create a master template that is usually void of content, with the exception I define as many of the paragraph styles I believe can/will be used with examples of their use in the body of the document--a style guide for that client. When beginning a new document for that client, I import those styles from the paragraph styles panel.
Exception to this is when in a rush I begin documentation first, then begin new work. Then in the new work, I still pull in those defined paragraph and or object styles via their panels into the new work.
There are times I need new styles. If they have broader applicability than a one-off instance or publication, then I open the style template for that client and import that style(s) from the publication containing the new style(s) and create example paragraphs and usage instructions.
Take care, Mike

Short Text/Material Description in PRs and POs

Hi Freinds
My client has a requirement that except for Item cat. D for all others the text feild should be greyed out and Material no. is mandatory. How to go about in customising.
Regards

First you need to define Z* doc type & in the Allowed Item Categories only allow "D".
and create new field selection key and assign it to Z* doc type..
and for Standard Doc type in in the Allowed Item Categories remove "D", then Pls do as below
Spro>Materials Management>Purchasing>Purchase Order>Define Document Types
Here check the "Field Selection Key" against the PO doc type
(ex: Standard NB doc type the "Field Selection Key" would be "NBF")
Then go to
Spro>Materials Management>Purchasing>Purchase Order>Define Screen Layout at Document Level
Select the " Field Selection Key" of ur doc type..Just Double click on that
then click on "Basic Data, Item", there you can see the "Short text" field..
and make it Display.
You need to use Z* doc type for Services , there you can enter short text.
and for Standard the Short text will be in Display mode.

Create new system and client with TDMS

Hi all;
I am tested the TDMS product with good results. I want create a new system and do one copy with time reduction time for new development system
What it´s the best solution?
- Install new system and do the client copy with TDMS
or
- System copy of production system, delete production client, create new client with UCUSV of productive system and copy client with TDMS?
Thanks a lot

Hi;
It´s true :).
Ok, one example, I have two systems, I want create system shell from A (client 900) to B . The central system is C
In system B I don´t have any client but the Cross is diferent to system A
I select in TDMS - ERP Shell Creation Package for SAP Release higher 4.6C
System Definition;
- Control system - C (all information it´s correct)
- Sender system - A (Client 900)
But i dont have any information about the receive system (A).
When execute the synchronization appears the system A, but with any information (destination ID)
and I have the error: Could not change password of RFC Destination sender system
Any Idea
thanks a lot for the help

Bridge Help | Create web galleries and PDFs with Adobe Output Module

This question was posted in response to the following article: http://helpx.adobe.com/bridge/using/create-web-galleries-pdfs-adobe.html

Plug-ins that failed to load:
It seems to me that something is wrong with your install. Maybe you did clone a former mac to install on this one? or copies old stuff to the new one. Don't know, it seems easy and quick but I prefer always a new install using a new computer or switching to a new system upgrade.
Lightning effects shows to be 32 bit while I think to know that Photoshop CS5 and CS5.5 are both 64 bit, however Bridge was turned to 64 bit in the CS6 version but that should not mater for you to use both applications from the same install disk (or download?)
And variations is something I tried to find in CS6 but can't find it there. I had long forgotten this feature that presented different previews and you could switch to color corrections and brightness (not sure) while looking at the result in the previews.
So I think you have some old material residing on your system. I would advice you to back up all custom settings (actions, tools, workspaces etc. and keywords in Bridge) Then do a search for the Adobe Cleaner tool :
http://www.adobe.com/support/contact/cscleanertool.html?promoid=GYTAU
(don't know this links work for you but you can find it easy with google).
Read the instructions carefully and follow this using the official uninstaller that came with PS (see application folder). Also be sure to have your serial number and AdobeID present and while an activation of PS is for the computer maybe for security first deactivate before uninstall.

Getting Started with Creating Mobile Apps and Websites with Design and Web Premium CS6 | Digital Design CS6 | Adobe TV

Adobe Evangelist Paul Trani shows how to create apps and websites for multiple screens using Design & Web Premium CS6.
http://adobe.ly/Iq676Z

I have CS6.5 installed through the Adobe Application Manager, Creative Cloud account. There are no PhoneGap sample pages under Mobile Started, only the ones labelled (Local). Where / how can I get these sample pages?

Create web galleries and PDFs with Adobe Output Module

This question was posted in response to the following article: http://help.adobe.com/en_US/creativesuite/cs/using/WSe851854fd1e0856a-4b08a77612477f69f15- 8000.html

HOW DO I CREATE A GALLERY IN DREAMWEAVER CS5!?
This is the Bridge Forum and AOM creates its own gallery, maybe you better drop this question in the dedicated Dream Weaver Forum:
http://forums.adobe.com/community/dreamweaver
(and there is no need for SHOUTING...)

Error creating folder /scripts and /css with 'upload to ftp host'

We have had a website designed for us, although I personally would like to update the website as and when needed.
During the upload to the ftp host at 82% an error message appears regarding the creation of folder /scripts and after pressing resume, another reading /css.
Once finished the live site is a complete mess. If someone can help expalin simply what is going on and how i can fix this problem.
Thanks
Ben

Refer to a similar thread here with a possible solution to the problem.
http://forums.adobe.com/message/5082790
Thanks,
Vinayak

MM: Open POs with IR but no GR

Hello MM Gurus,
May I ask how can I execute two reports showing:
a) open POs with IR but no GR
b) open POs with IR and partial GR
Your prompt response is highly appreciated.
Thank you very much in advance!
Best Regards,
Albert

hello Kishore,
thanks for your prompt reply. i've tried following your suggestion. however, i found that the choosing both (REHNUNG and WE101), the system displays ALL OPEN POs AND POs with OPEN invoices.
i would need a report that displays ALL OPEN POs WITH INVOICE (Open POs with IR).
it seems that multiple selection in ME2N only satisfies the condition "AND", and not "WITH".
any further ideas?
thanks very much.
best regards,
albert

Need to create report query to get latest open and last closed period for given application

Hi All,
I need to create a report query to get below result displayed in report output.
1)   -   Application name
2)   -    Ledger name
-o/ -Operating Unit
3)   - Last Closed Period
4)   - Current Open Period
5)   - Date Closed – Last Closed Period
6)   - Date Open – Current Open Period
I tr I tried to create the query below is the same. Please let me know if it looks fine.
SELECT *
FROM (SELECT fav.application_name ,
               hou.name Operating_Unit_Name,
               gl.name Ledger_name,
               gl.latest_opened_period_name,
               gps.period_name Period_Name,
               DECODE(gps.closing_status, 'O', 'Open', 'C', 'Closed') status,
               gps.last_update_date Last_status_modified_date
          FROM gl_period_statuses gps,
               gl_sets_of_books   gsob,
               fnd_application_vl fav,
               hr_operating_units hou,
               gl_ledgers         gl
         WHERE gps.period_name = gps.period_name
           AND gps.closing_status ='C'
           AND fav.application_short_name =
               NVL('&p_application_short_name', fav.application_short_name)
           AND gps.application_id = fav.application_id
           AND gsob.set_of_books_id = gps.set_of_books_id
           AND hou.set_of_books_id = gps.set_of_books_id
           AND gl.ledger_id = gsob.set_of_books_id
           AND hou.organization_id=NVL('&p_operating_unit',hou.organization_id)
           AND gl.ledger_id=NVL('&p_ledger_id',gl.ledger_id)
         ORDER BY gps.last_update_date desc )WHERE ROWNUM = 1
UNION ALL
SELECT *
FROM (SELECT fav.application_name Application_Name,
               hou.name Operating_Unit_Name,
               gl.name Ledger_name,
               gl.latest_opened_period_name,
               gps.period_name Period_Name,
               DECODE(gps.closing_status, 'O', 'Open', 'C', 'Closed') status,
               gps.last_update_date Last_status_modified_date
          FROM gl_period_statuses gps,
               gl_sets_of_books   gsob,
               fnd_application_vl fav,
               hr_operating_units hou,
               gl_ledgers         gl
         WHERE gps.period_name = gps.period_name
           AND gps.closing_status = 'O'
           AND fav.application_short_name =
               NVL('&p_application_short_name', fav.application_short_name)
           AND gps.application_id = fav.application_id
           AND gsob.set_of_books_id = gps.set_of_books_id
           AND hou.set_of_books_id = gps.set_of_books_id
           AND gl.ledger_id = gsob.set_of_books_id
           AND hou.organization_id=NVL('&p_operating_unit',hou.organization_id)
           AND gl.ledger_id=NVL('&p_ledger_id',gl.ledger_id)
         ORDER BY gps.last_update_date desc)
         WHERE ROWNUM = 1

It is within the table I believe (I'm not a DBA or a developer) since I created a BLOB column and then used the file browse feature to allow users to attach a resume to the table in order to be able to perform a search of the attached documents.
I'm just having a hard time pointing the link in the search results report to the document in the blob column.
The information on that page is great if you're trying to create a link to the document on the initial report.
But I created a query using Oracle Text to run a report that does a boolean search of the attached word documents in the table.
When it displays the search results, it doesn't create a link to the document and I can't figure out how to do it.
Here's a link the the instructions I used to create the initial search report with Oracle Text, mind you I only created the index and query, I didn't add in all the link data since they're using documents on websites and I'm using documents in a table.
http://www.oracle.com/technology/products/database/application_express/pdf/apex_text_application_v1.6.pdf
If you can help me with this I'd really appreciate it.
Thanks again.
Greg
Edited by: gjones77 on Dec 2, 2008 8:14 AM

How to create a variable, and how to use the same across all the reports?

Hi,
Is there any possibility of creating a variable at once and making use of that across in all the Crystal Reports?
Thanks In advance for your time and solution.

MohanMRK,
can you describe how you get the value for this variable?
is it calculated on one report and then you want to pass it to a 2nd report? if that's the case, what you can do is have the reports linked via an opendocument link and pass the value to the 2nd report as a parameter. the value / parameter is only shared when you press the opendocument hyperlink.
please see the sdk library [here |http://www.sdn.sap.com/irj/boc/sdklibrary]and scroll down to the opendocument section near the bottom.
if you are just trying to find a way to share a calculation across reports look into creating a Custom Function which can be added to your repository. please note that this will not pass a calculated value across 2 or more reports, but will just have a shared method of making the calculation.
as Abhilash mentioned before, there's no way to use an actual Variable across 2 separate reports without them being a main report and subreport(s). in that case you'll want to look into Shared Variables.
cheers,
jamie

Problem in creating group above AND group left in one report!

Hi all,
I need a report that is a combination of group above and group
left.
Suppose I have 3 table (Emp, Sales, Product):
Emp Table has 2 column
- Emp_PK
- Emp_Name
Sales Table has 4 column
-Sales_PK
-Sales_Date
-Emp_FK
-Produck_FK
-Quantity
Product Table has 3 column
-Product_PK
-Product_Name
-Product_Price
I want to make Employee Sales Report For The Month that will
look like this:
Emp Number___: Emp_PK
Emp Name_____: Emp_Name
Sales Date______Product_Name____Quantity \(2 sales
________________Product_Name____Quantity /the date)
Sales_Date______Product_Name____Quantity
As you can see this consist of group above (The Employee) and
group left (The Sales and Product).
I create this by using 2 queries and link them (the Emp_PK from
1st query and Emp_FK from 2nd query) on the report builder using
data link.
The first query is:
Select Emp_PK, Emp_Name from Emp
The second query is
Select Emp_FK, Sales_Date, Product_Name, Quantity
From Sales, Product
Where Product_PK=PRODUCT_FK
I then create the layout for second query and choose group left
for Sales_Date using wizard and I create additional layout to
for the employee.
The problem is that when I run this report, it will print ALL
the employee record first (including employee who has NOT sale
anything) and then on the last page it will print the record of
Last employee on the Emp table and ALL sales record (including
those that is done by other employee).
This report will run correctly if I choose an exact employee
(For example by adding Where Emp_PK=1111 in the first query) to
report all of the sales done by this person (employee with emp
number of 1111). However I need the report to run and print
ONLY those employee who has Sales Records!
I thought that by linking the 2 queries in Data Model, it will
have the same effect as linking using the WHERE clause in query.
If suppose I create a query like this:
SELECT Emp_PK, Emp_Name, Sales_Date, Product_Name, Quantity
FROM Emp, Sales, Product
WHERE Emp_PK=Emp_FK AND Product_PK=Product_FK
The report will run OK but I can only choose EITHER group above
or group left for this ONE query methods in report Wizard.
Sorry if it is a long question but I hope you can see what I am
trying to do.
Thanks in advance for any tip.

hello,
of course you can create group left and group above blocks in a
single report.
you might want to use the INSERT REPORT BLOCK instead of the
report wizard, as the report wizard only allows you to use one
report layout per report, where the report block wizard (invoked
by INSERT REPORT BLOCK) allows you to choose on a per-block
basis.
of course you can create the blocks completely from scarth by
hand, if you want to.
regards,
the oracle reports team --pw

Creating a report transaction(SE93) and Start with variant

I have a report that I am creating a transaction using SE93 with in our development client. I also have a variant associated with this report.
When I am on SE93, I entered the program name, selection screen = 1000, and choose the dropdown list for "Start with variant", nothng appears. My variant does not appear in the dropdown. Why is that?
I also tried creating a transport for the variant, thinking that this was the problem, but that didn't help either.
What am I missing here?
Thanks for your help.

Just type the variant name instead of F4. You may see some inconsistencies because the variant is created under local object.
Edited:
Right answer would be
Go to se38 - Enter the program name - choose variants - Change - Enter variant name (choose attributes but not values) - go to UTILITIES (on application menu) - Transport request - Create a transport before you create a transaction.
The reason: You cannot use local variant in transactions and the variants you have created in the program are local.
Good luck
Edited by: Sampath Kumar on Nov 16, 2009 11:04 AM
Edited by: Sampath Kumar on Nov 16, 2009 11:07 AM

Report of PO created by PRs and POs with RFQ

Similar Messages

Maybe you are looking for